The effect of cooling rate during hydrothermal synthesis of ZnO nanorods

The hydrothermal method was employed in order to obtain zinc oxide nanorods directly on Si/SiO₂/Ti/Zn substrates forming brush-like layers. In the final stages of synthesis, the reaction vessel was naturally cooled or submitted to a quenching process. X-ray diffraction results showed that all the nanostructures grew [0 0 0 1] oriented perpendicular to the substrate. The influence of the cooling process over the morphology and dimensions of the nanorods was studied by scanning electron microscopy. High-resolution transmission electron microscopy images of the quenched samples showed that the zinc oxide (ZnO) crystal surfaces exhibit a thin-layered coating surrounding the crystal with a high degree of defects, as confirmed by Raman spectroscopy results. Photodetectors made from these samples exhibited enhanced UV photoresponses when compared to the ones based on naturally cooled nanorods.     

Hydrothermal synthesis and characterization of VO2 (B) nanorods array

Highly ordered nanorods array of B phase vanadium dioxide was firstly synthesized with n-butanol as the reducing agent via a simple hydrothermal method without using template. The samples have been characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FE-SEM). The size of VO₂ (B) nanorods has the dimension of 50–100 nm in diameter and about 1–5 μm in length. The samples were measured as electrode materials by charge–discharge technique and the VO₂ (B) nanorods array demonstrated a high specific capacity of 520 mAh/g at 0.2 C. The influence of reaction temperature on fabricating nanorods array has been studied. The possible growth mechanisms of formation of nanorods and assembly of array were discussed.     

Structural evolution of SnO2 nanostructure from core–shell faceted pyramids to nanorods and its gas-sensing properties

Tin oxide (SnO₂) nanorods were synthesized through an aqueous hexamethylenetetramine (HMTA) assisted synthesis route and their structural evolution from core–shell type faceted pyramidal assembly was investigated. Structural analysis revealed that the as-synthesized faceted SnO₂ structures were made of randomly arranged nanocrystals with diameter of 2–5 nm. The shell thickness (0–80 nm) was dependent on the molar concentration of HMTA (1–10 mM) in aqueous solution. It was revealed that the self-assembly was possible only with tin (II) chloride solution as precursor and not with tin (IV) chloride solution. At longer synthesis hours, the pyramidal nanostructures were gradually disintegrated into single crystalline nanorods with diameter of about 5–10 nm and length of about 100–200 nm. The SnO₂ nanorods showed high sensitivity towards acetone, but they were relatively less sensitive to methane, butane, sulfur dioxide, carbon monoxide and carbon dioxide. Possible mechanisms for the growth and sensing properties of the nanostructures were discussed.     

High-yield synthesis of single-crystal short Eu2O3 nanorods through a facile sol–gel template approach

High-yield Eu₂O₃ short nanorods have been prepared by a facile sol-gel method with polystyrene/polyelectrolyte (PS/PE) microreactor as template in an aqueous solution of europium nitrate in the presence of ammonia and urea. The properties of Eu₂O₃ nanorods were characterized by powder X-ray diffraction, thermogravimetric analysis, transmission electron microscopy (TEM), high-resolution transmission electron microscopy, field emission scanning electron microscopy (FESEM), and photoluminescence spectroscopy. The particle sizes measured from TEM and FESEM are about 200 nm×500 nm (W×L). A possible mechanism for the formation of such high-yield oxide nanorods is discussed.     

The effect of polyacrylamide on the crystallization of calcium carbonate: Synthesis of aragonite single-crystal nanorods and hollow vatarite hexagons

CaCO₃ nanorods were synthesized via a facile solution route by polymer-controlled crystallization in the presence of polyacrylamide (PAM). The morphology, size and crystal structure were characterized by means of scanning electron microscope (SEM), transmission electron microscope (TEM), and X-ray diffraction (XRD). The results suggest that the as-synthesized product was CaCO₃ (aragonite) nanorods with diameter ca. 50 nm and length ca. 1 μm. Selected area electron diffraction (SAED) pattern shows the single-crystal nature of CaCO₃ nanorods. The reaction time, temperature, pH and reactant concentration were systemically investigated. With the increase in the reaction time, hollow vaterite hexagonal disks can be obtained.     

Preparation and the third-order optical nonlinearities of the sodium borosilicate glass doped with Cu7.2S4 quantum dots

The sodium borosilicate glass doped with Cu_7.2S₄ quantum dots was prepared by using both sol–gel and atmosphere control methods. The formation mechanism and the microstructure of the glass were examined using differential thermal analysis and thermal gravimeter (TG-DTA), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), energy dispersive X-ray spectra (EDX), high-resolution transmission electron microscopy (HRTEM), and selected area electron diffraction (SAED). The results revealed that Cu_7.2S₄ quantum dots in orthorhombic crystal system had formed in the glass, and the size ranged from 9 nm to 21 nm. In addition, Z-scan technique was used to measure the third-order optical nonlinearities of the glass. The results indicated that the third-order optical nonlinear refractive index γ, the absorption coefficient β, and the susceptibility χ⁽³⁾ of the glass were 1.11 × 10^? 15 m²/W, 8.91 × 10^? 9 m/W, and 6.91 × 10^? 10 esu, respectively.     

Synthesis,characterization, crystal structure and NLO properties of a new mixed crystal potassium sodium ammonium dihydrogenphosphate K0.23Na0.23(NH4)0.54H2PO4

Potassium sodium ammonium dihydrogenphosphate K_0.23Na_0.23(NH₄)_0.54H₂PO₄ (KSADP), a new mixed crystal has been grown in aqueous medium by the slow evaporation of equimolar mixture of ammonium dihydrogenphosphate (ADP), potassium dihydrogenphosphate (KDP) and sodium dihydrogenphosphate (SDP). Crystal composition as determined by single crystal X-ray diffraction analysis reveals that it belongs to the tetragonal system with noncentrosymmetric space group I-42d and it is structurally similar to ADP with cell parameter values, a=7.4794(4) Å; b=7.4794(4) Å; c=7.2974(11) Å; υ=408.23(7) Å³; z=4. The presence of sodium and potassium in ADP matrix was confirmed by inductively coupled plasma emission spectrometry and energy dispersive X-ray spectroscopy. The partial cationic substitution results in defect centers influencing the physical properties. Slight shifts in vibrational patterns could be attributed to strains in the lattice. Refinement of structure by single crystal XRD analysis reveals that potassium, sodium and ammonium coexist in the mixed crystal. The surface morphology of the as-grown specimen, which is changed as a result of cationic incorporation, was studied by scanning electron microscopy. The relative second harmonic generation (SHG) efficiency measurements revealed that the mixed crystal has a superior NLO activity than ADP.     

Structural study of undoped and (Mn, In)-doped SnO2 thin films grown by RF sputtering

Undoped and 5%(Mn, In)-doped SnO₂ thin films were deposited on Si(1 0 0) and Al₂O₃ (R-cut) by RF magnetron sputtering at different deposition power, sputtering gas mixture and substrate temperature. X-ray reflectivity was used to determine the films thickness (10–130 nm) and roughness (～1 nm). The combination of X-ray diffraction and Mössbauer techniques evidenced the presence of Sn⁴⁺ in an amorphous environment, for as-grown films obtained at low power and temperature, and the formation of crystalline SnO₂ for annealed films. As the deposition power, substrate temperature or O₂ proportion are increased, SnO₂ nanocrystals are formed. Epitaxial SnO₂ films are obtained on Al₂O₃ at 550 °C. The amorphous films are quite uniform but a more columnar growth is detected for increasing deposition power. No secondary phases or segregation of dopants were detected.     

Effects of substrate orientation on aluminum grown on MgAl2O4 spinel using molecular beam epitaxy

Al thin films have been grown on single-crystal MgAl₂O₄ spinel substrates using solid source molecular beam epitaxy. The structural properties of Al layers were systematically investigated as a function of substrate orientation. X-ray diffraction reveals that Al layers are coherently grown on both (0 0 1)- and (1 1 1)-oriented spinel substrates. However, scanning electron microscopy and atomic force microscopy show that Al layers on (0 0 1) spinel substrates display smoother surface morphology than those grown on (1 1 1) spinel substrates. Additionally, electron backscatter diffraction and transmission electron microscopy demonstrate the presence of a high density of twin domain structures in Al thin films grown on (1 1 1) spinel substrates.     

Dielectric relaxation and morphologic properties of CaCu3Ti4O12 doped with GeO2

CaCu₃Ti₄O₁₂ (CCTO) is a material with giant dielectric constant, presenting good stability over a wide temperature and frequency ranges. The preparation method and doping has a great influence on the microstructure and dielectric properties of this material. In this work, doping CCTO with 2–10 wt% GeO₂ has been shown to increase the dielectric constant. We studied the prepared samples by X-ray diffraction (XRD), scanning electron microscopy (SEM) and impedance spectroscopy. X-ray diffraction shows the presence of nanocristals. Grains and grain boundaries compositions have been observed by scanning electron microscopy with energy dispersive X-ray spectrometry mapping. Impedance spectroscopy measurements, in the frequency range from 75 kHz to 30 MHz, and temperature from 250 to 325 K, have been performed. The data were analyzed using the Cole–Cole model of dielectric relaxation.     

Characterization of B2O3 and/or WO3 containing tellurite glasses

Characterization of B₂O₃ and/or WO₃ containing tellurite glasses was realized in the 0.80TeO₂–(0.20 ? x)WO₃ ? xB₂O₃ system (0 ≤ x ≤ 0.20 in molar ratio) by using differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectrometry techniques. Glasses were prepared with a conventional melt-quenching technique at 750 °C. To recognize the thermal behavior of the glasses, glass transition and crystallization temperatures, glass stability value, glass transition activation energy, fragility parameter were calculated from the thermal analyses. Density, molar volume, oxygen molar volume and oxygen packing density values were determined to investigate the physical properties of glasses. Fourier transform infrared spectra were interpreted in terms of the structural transformations on the glass network, according to the changing B₂O₃ and/or WO₃ content. Crystallization behavior of the glasses was investigated by in situ X-ray diffraction measurements and microstructural characterization was realized by scanning electron microscopy and energy dispersive X-ray spectrometry analyses.     

Synthesis and microstructural properties of ZnO nanorods on Ti-buffer layers

This study examined the structural properties of ZnO nanorods grown on Ti-buffer layers with different surface roughnesses of 1.5 and 4.0 nm. Vertically aligned ZnO nanorods were synthesized on Al₂O₃ substrates with a Ti-buffer layer by metal-organic chemical vapor deposition. X-ray diffraction revealed the ZnO nanorods grown on a smooth surface to have higher quality and better alignment in the ab-plane than those grown on the rough surface. Field-emission transmission electron microscopy (FE-TEM) measurements revealed a disordered layer at the ZnO/Ti interface. FE-TEM demonstrated that the Ti-buffer layer contained a mixture of ordered and amorphous phases. Energy dispersive spectroscopy (EDS) analysis revealed the Ti-buffer layers to be entirely oxides.     

Preparation of amorphous carbon nanotubes using attapulgite as template and furfuryl alcohol as carbon source

Amorphous carbon nanotubes were synthesized by vapor deposition polymerization (VDP) method using attapulgite as template and furfuryl alcohol as carbon source. The morphology and microstructure analysis of the as-prepared samples showed that highly pure amorphous carbon nanotubes were obtained, and determined by scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SEAD) and energy dispersive X-ray (EDX) spectrum. The Brunauer–Emmett–Teller (BET) surface area analysis indicated that the specific surface area of the as-prepared amorphous carbon nanotubes reaches up to 503.1 m²/g. A hypothesis about the formation mechanism of the amorphous carbon nanotubes was also proposed accordingly.     

Electrodeposited and selenized CIGS thin films for solar cells

Cu(In,Ga)Se₂ polycrystalline thin films were deposited adopting the potentiostatic electrochemical method on Mo/soda lime glass substrate. All the as-deposited Cu(In,Ga)Se₂ thin films were annealed in a selenium atmosphere at 550 °C for 1 h to improve the film crystalline properties. The selenized CIGS thin films were characterized by energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and scanning electron microscopy (SEM).The results indicate Cu(In,Ga)Se₂ thin films have single chalcopyrite structure and the grain size varies from 0.8 to 2.5 μm.     

Microwave preparation,structure and electrical properties of calcium–sodium–phosphate biosystem

The hydroxyapatite biomaterial (Ca₁₀(PO₄)₆(OH)₂ – HAP) is the main mineral constituent of teeth and bones, with excellent biocompatibility with hard and muscle tissues. These materials exhibit several problems of handling and fabrication, which can be overcome by mixing them with a suitable binder. In this study, a microwave process was used to produce hydroxyapatite using the starting materials CaCl₂ and Na₂HPO₄ with previous precipitation. The mixture was exposed to microwave radiation for 5, 10, 15 and 20 min through domestic microwave ovens with an output power of 1 kW and frequency oscillation of 2.45 GHz. The samples were analyzed by X-ray powder diffraction, scanning electron microscopy, energy dispersive X-ray, dc conductivity and impedance spectroscopy. X-ray powder diffraction revealed the formation of HAP after 5 min of exposure. The presence of a low crystallinity state and the transition, with the rise of radiation exposure time, to a crystalline phase was related to the Ca/P mass and Ca/P atomic ratio. The presence of this low crystalline phase, detected by X-ray powder diffraction and scanning electron microscopy, seems to have a direct influence on electrical and dielectrical characteristics.     

Synthesis,characterization and application of magnetic-zirconia nanocomposites

In the present study, a magnetic-zirconia nanocomposite was successfully synthesized by a single-step co-precipitation method. The as-prepared nanocomposite was characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, powder X-ray diffraction, and nitrogen sorption measurements. The ultimate material was found to be Fe₃O₄–ZrO₂ nanoparticles with average diameter of 80 nm, high surface area up to 166 m²/g, and strong magnetic property. The application of this new nanocomposite was herein demonstrated by the adsorption of ethyl methylphosphonic acid, a degradation product of nerve agent in water, followed by mass spectrometry detection. Excellent adsorption could be observed, indicating the as-synthesized material was effective to remove phosphonic acid compound from water. Apart from adsorption, the Fe₃O₄–ZrO₂ nanocomposite is promising in various applications such as catalysis and bioseparation.     

Phase evolution on heat treatment of sodium silicate water glass

Heat treatment of sodium silicate water glass of the nominal composition Na₂O/SiO₂ = 1:3 was carried out from 100 °C up to 800 °C and the advancement of the resulting phases was followed up by powder X-ray diffraction, scanning electron microscopy and thermogravimetry along with differential thermal analysis. The water glass, initially being an amorphous solid, starts to form crystals of β-Na₂Si₂O₅ at about 400 °C and crystallizes the SiO₂ modification cristobalite at about 600 °C that coexists along with β-Na₂Si₂O₅ up to 700 °C. At 750 °C Na₆Si₈O₁₉ appears as a separate phase and beyond 800 °C, the system turns into a liquid.     

Nanocrystallization-induced structural evolution of intergranular amorphous phase in Fe78B13Si9 alloy

The nanocrystallization-induced structural evolution of the intergranular amorphous phase in a Fe₇₈B₁₃Si₉ alloy was investigated by X-ray diffraction (XRD) measurements, transmission electron microscopy (TEM), and positron annihilation spectroscopy. Crystallization occurs at 773 K, where nanocrystallites of α-Fe with an average grain size of a few tens of nanometers are formed in an amorphous matrix. With increasing annealing temperature up to 973 K, the average grain size increases up to ∼80 nm. In the as-prepared sample corresponding to an amorphous precursor, more than 90% of the positrons are localized at vacancy-sized free volumes dominantly surrounded by Fe atoms and other positrons are trapped by microvoids. Along with the appearance of nanocrystallites and their growth due to annealing, the concentration of microvoids is increased in the intergranular amorphous phase.     

Fabrication and characterization of nanorod solar cells with an ultrathin a-Si:H absorber layer

In this paper, we present a three-dimensional nanorod solar cell design. As the backbone of the nanorod device, density-controlled zinc oxide (ZnO) nanorods were synthesized by a simple aqueous solution growth technique at 80 °C on ZnO thin film pre-coated glass substrate. The as-prepared ZnO nanorods were coated by an amorphous hydrogenated silicon (a-Si:H) light absorber layer to form a nanorod solar cell. The light management, current–voltage characteristics and corresponding external quantum efficiency of the solar cells were investigated. An energy conversion efficiency of 3.9% was achieved for the nanorod solar cells with an a-Si:H absorber layer thickness of 75 nm, which is significantly higher than the 2.6% and the 3.0% obtained for cells with the same a-Si:H absorber layer thickness on planar ZnO and on textured SnO₂:F counterparts, respectively. A short-circuit current density of 11.6 mA/cm² and correspondingly, a broad external quantum efficiency profile were achieved for the nanorod device. An absorbed light fraction higher than 80% in the wavelength range of 375–675 nm was also demonstrated for the nanorod solar cells, including a peak value of ~ 90% at 520–530 nm.     

The thermal behavior of 8 mol% yttria-stabilized zirconia nanocrystallites prepared by a sol–gel process

Eight mole percent yttria-stabilized zirconia (8YSZ) nanocrystallites were synthesized at a relatively low temperature using ZrOCl₂ · 8H₂O and Y(NO₃)₃ · 6H₂O as starting materials in an ethanol–water solution by a sol–gel process. The thermal behavior of the 8YSZ nanoparticles was investigated by differential thermal analysis, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy and electron diffraction. The crystallization temperature of the 8YSZ gel powders was estimated to be about 729 K by DTA analysis. When calcined from 773 to 1273 K, the crystallization of the cubic phase was observed by XRD. The crystallite size of the 8YSZ increased from 7.14 to 20.10 nm with calcining temperature increasing from 773 to 1273 K. The activation energy for growth of 8YSZ nanoparticles was found to be 7.26 kJ/mol.