Chiral zinc(II) and copper(II)-catalyzed asymmetric ring-opening reactions of meso-epoxides with aniline and indole derivatives

The ring-opening reactions of meso-epoxides with aniline and indole derivatives proceeded smoothly in water in the presence of Zn(II) and Cu(II) surfactant-type catalysts to afford the corresponding products in moderate to high yields with good to excellent enantioselectivities. Opposite enantiomers were obtained by using Sc(III) and Zn(II) or Cu(II) with the same chiral ligand. Crystal structures of these catalysts may explain the reversal of the enantioselectivity. Some reactions were also tested in dichloromethane (DCM), and it was revealed that the reactions proceeded faster in water than in DCM. Finally, several non-linear effect experiments suggested unique structure of these chiral catalysts.     

A novel layered organic polymer-inorganic hybrid zinc poly (styrene-phenylvinylphosphonate)-phosphate immobilized chiral salen Mn(III) catalyst large-scale asymmetric epoxidation of unfunctionalized olefins

A novel layered organic polymer-inorganic hybrid zinc poly (styrene-phenylvinylphosphonate)-phosphate (ZnPS-PVPA) has been synthesized under mild conditions and diphenol-modified ZnPS-PVPA was used to successfully immobilize the chiral salen Mn(III) by axial coordination. The obtained heterogeneous chiral catalysts exhibited excellent activities and enantioselectivities using sodium periodate as an oxidant for asymmetric epoxidation of unfunctionalized olefins, especially for the epoxidation of α-methylstyrene (conversion: up to 97%; ee: exceed 99%). Moreover, these synthesized catalysts were relatively stable and could be expediently separated from the reaction system, and could be recycled at least ten times without obvious loss of activity and enantioselectivity. These novel catalysts could be efficiently used in large-scale reactions with the enantioselectivity being maintained at the same level, which offer a great possibility for application in industry.     

Synthesis of hindered chiral guanidine bases starting from (S)-(N,N-dialkyl-aminomethyl)pyrrolidines and BrCN

An efficient method for the preparation of hindered chiral guanidines using cyanogen bromide is described. The reaction between BrCN and vicinal diamines derived from (S)-2-(N,N-dialkyl-aminomethyl)-pyrrolidines provides chiral substituted cyanamides. The cyanamide derivatives reacted with secondary amines in hexafluoroisopropanol at reflux to form chiral hindered guanidines, which were isolated in good to excellent yields (70–96%). The chiral guanidines were prepared in an effort to design sophisticated chiral guanidine catalysts for asymmetric synthesis.     

Copper(II)‐Catalyzed Nitroaldol (Henry) Reactions: Recent Developments

Self‐assembled copper(II) complexes are described as effective catalysts for nitroaldol (Henry) reactions on water. The protocol involves a heterogeneous process and the catalysts can be recovered and recycled without loss of activity. Further, C2‐symmetric N,N′‐substituted chiral copper(II) salan complexes are found to be more effective catalysts than chiral copper(II) salen complexes for reactions in homogeneous catalysis, with high enantioselectivities. The reactions involve bifunctional catalysis, bearing the properties of a Brønsted base, as well as a Lewis acid, to effect the reaction in the absence of external additives.     

Enantioselective catalytic synthesis of ethyl mandelate derivatives using Rh(I)–NHC catalysts and organoboron reagents

Herein we describe for the first time the enantioselective catalytic arylation of ethyl glyoxalate using phenylboron reagents and chiral rhodium(I)–NHC catalysts. KO^tBu was the base of choice, along with tert-amyl alcohol as the solvent. A novel chiral bis-imidazolium salt was synthesized and evaluated for the first time in this catalytic transformation. Although moderate enantioselectivities (up to 34% ee) were obtained for the phenylation reaction, despite the excellent yields, very low enantioselectivities were obtained using other arylboronic acids with a variety of chiral rhodium(I)–NHC catalysts.     

Asymmetric induction afforded by chiral azolylidene N-heterocyclic carbenes (NHC) catalysts

Screening studies of new chiral imidazolium and triazolium based NHC salts I–VIII as ligands in asymmetric organometallic catalysis and as organocatalysts showed that these catalysts efficiently promoted the reactions. Moderate enantioselectivities (55–57% ee) were obtained in the asymmetric Cu-NHC catalysed conjugate additions of diethylzinc to cyclohexenone, in accordance with most previous studies. The chiral induction afforded in the gold(I)-NHC catalysed cyclopropanation reactions was low (<28% ee). However, these results represent the first reported chiral gold(I)-NHC catalysed olefin cyclopropanation. The NHC-organocatalysed asymmetric cross-annulation of cinnamaldehyde and trifluoroacetophenone gave lower enantioselectivity (<50% ee) but higher yields of the γ-lactone product relative to previous reports. The enantioselectivities obtained varied considerably, even within a group of structurally closely related NHCs. This study demonstrates the challenge of designing NHCs with a general ability to induce asymmetry in a broader range of reactions.     

Intramolecular asymmetric C–H insertion of N-arylalkyl,N-bis(trimethylsilyl)methyldiazoamides mediated by chiral rhodium(II) catalysts. Synthesis of (R)-β-benzyl-γ-aminobutyric acid

The enantio- and site-selectivity of the intramolecular C–H insertion reactions of acyclic N-arylalkyl, N-bis(trimethylsilyl)methyl α-diazoacetamides, and α-carboalkoxy-α-diazoacetamides 1a–g, catalyzed by chiral Rh(II) carboxamidates and Rh(II) carboxylates were studied. In general, the reaction showed good to excellent chemoselectivity. Regioselectivity for most of the reactions was high, but was also found to be influenced by the structure of the diazo substrate and the chiral Rh(II) catalyst employed. The highest enantioselectivity for the reactions catalyzed by chiral Rh(II) carboxamidates was 69% and Rh₂(4R-MEOX)₄ was found to be the most effective. For the chiral Rh(II) carboxylate catalyzed reactions, the highest ee obtained was 75% and Rh₂(S-PTTL)₄ is the optimal catalyst. The method was applied toward the synthesis of a GABA analogue, (R)-β-benzyl-γ-aminobutyric acid.     

Chiral monomeric organorhenium(VII) and organomolybdenum(VI) compounds as catalysts for chiral olefin epoxidation reactions

Several attempts have been made to transform the organometallic Re(VII) compound MTO and the (MoO₂)²⁺ moiety to chiral epoxidation catalysts by addition of chiral organic ligands. Being very efficient epoxidation catalysts in achiral reactions, it was hoped that these compounds could be transformed into chiral epoxidation catalysts by adding chiral Lewis base ligands. The major flaw of most of these attempts, however, was the weak coordination of the chiral Lewis base ligands to the metal center, which led either to high ees only at the very beginning of the catalytic reaction (low conversion) or to generally low enantiomeric excesses. The heterogenisation of the Mo(VI) complexes was, at least in some cases, successfully achieved but with the same drawbacks with respect to the ees as in the homogeneous phase. Currently, attempts are being made to synthesize organometallic Re(VII) and Mo(VI) complexes with stronger interactions between the metal containing moiety and the chiral ligand(s).     

Preparation and use of MeO-PEG-supported chiral diphosphine ligands: soluble polymer-supported catalysts for asymmetric hydrogenation

Two new chiral MeO-PEG-supported (R)-BINAP and (3R,4R)-Pyrphos ligands were synthesized and employed in the Ru(II)- and Rh(I)-catalyzed asymmetric hydrogenation of 2-(6′-methoxy-2′-naphthyl)propenoic acid 5 and prochiral enamides 10. The results showed that these new soluble polymeric catalysts exhibited high catalytic activity and enantioselectivity. Enantiomeric excesses (e.e.s) in the ranges 90–96% and 86–96% were achieved in the hydrogenation of 5 and 10, respectively. Furthermore, these catalysts could be recovered easily and the recycled catalysts were shown to maintain their efficiency in subsequent reactions.     

Use of chiral B(III) complexes in the cycloaddition of C,N-diphenylnitrone to tert-butyl vinyl ether

The 1,3-dipolar cycloaddition of C,N-diphenylnitrone to tert-butyl vinyl ether in the presence of several chiral B(III) complexes which incorporate different bidentate ligands has been investigated. The use of these B(III) species reverses the endo/exo diastereoselectivity in relation to the uncatalysed reaction, giving trans cycloadducts as major products. Some of the catalysts gave very fast and high yielding reactions, but the enantioselectivities were only low to moderate.     

Enantioselective addition of dialkylzinc to aldehydes catalyzed by (S)-2-(N,N-disubstituted aminomethyl)indoline

Chiral di- or triamines, (S)-2-(N,N-disubstituted aminomethyl)indoline 1a–d, derived from (S)-indoline-2-carboxylic acid were efficient chiral catalysts for the enantioselective addition of dialkylzincs to aldehydes. The best results were obtained by employing 15 mol% of (S)-2-(4-methylpiperazin-1-ylmethyl)indoline 1c, and chiral secondary alcohols were obtained in up to 97% ee.     

Asymmetric synthesis of novel 1,4-aminoalcohol ligands with norbornene and norbornane backbone: use in the asymmetric diethylzinc addition to benzaldehyde

The asymmetric synthesis of cis-1,4-aminoalcohols with norbornene and norbornane backbone was performed starting with (2S,3R)-(−)-cis-hemiester 1 (98% ee). Chemoselective amination with HMPTA followed by Grignard reactions and subsequent LAH reductions afforded compounds 5a–d. cis-Hemiester 1 was also transformed into chiral ligands 7a–f and 9a–d with the DCC coupling method followed by LAH reduction using acyclic, heterocyclic amines and various aniline derivatives and p-toluenesulfonamide, respectively. The chiral ligands were subjected to asymmetric diethylzinc addition to examine their effectiveness as chiral catalysts. Among these, arylamine and tosyl substituted chiral ligands 9a–d exhibited the highest selectivities (up to 97% ee).     

Asymmetric cyclopropanation catalyzed by C2-symmetric bis-(ephedrine)-Cu(II) complexes

The asymmetric cyclopropanation of styrene with alkyl diazoacetate was performed with a series of Cu(II) complexes of novel chiral ligands, which were derived from substitution of 1,3-dibromopropane, 1,2-dibromoethane, α,α′-dibromo-m-xylene and 2,6–bis(bromomethyl)pyridine with 1R, 2S-(−)-ephedrine. These prepared catalysts shown to be highly active in the enantioselective cyclopropanation with ee higher than 89% under the optimal conditions.     

Chiral iridium(I) bis(NHC) complexes as catalysts for asymmetric transfer hydrogenation

The common use of NHC complexes in transition‐metal mediated C–C coupling and metathesis reactions in recent decades has established N‐heterocyclic carbenes as a new class of ligand for catalysis. The field of asymmetric catalysis with complexes bearing NHC‐containing chiral ligands is dominated by mixed carbene/oxazoline or carbene/phosphane chelating ligands. In contrast, applications of complexes with chiral, chelating bis(NHC) ligands are rare. In the present work new chiral iridium(I) bis(NHC) complexes and their application in the asymmetric transfer hydrogenation of ketones are described. A series of chiral bis(azolium) salts have been prepared following a synthetic pathway, starting from L ‐valinol and the modular buildup allows the structural variation of the ligand precursors. The iridium complexes were formed via a one‐pot transmetallation procedure. The prepared complexes were applied as catalysts in the asymmetric transfer hydrogenation of various prochiral ketones, affording the corresponding chiral alcohols in high yields and moderate to good enantioselectivities of up to 68%. The enantioselectivities of the catalysts were strongly affected by the various, terminal N‐substituents of the chelating bis(NHC) ligands. The results presented in this work indicate the potential of bis‐carbenes as stereodirecting ligands for asymmetric catalysis and are offering a base for further developments. Copyright © 2010 John Wiley & Sons, Ltd.     

Asymmetric Hydrogenations (Nobel Lecture)

The start of the development of catalysts for asymmetric hydrogenation was the concept of replacing the triphenylphosphane ligand of the Wilkinson catalyst with a chiral ligand. With the new catalysts, it should be possible to hydrogenate prochiral olefins. Knowles and his co‐workers were convinced that the phosphorus atom played a central role in this selectivity, as only chiral phosphorus ligands such as (R,R)‐DIPAMP, whose stereogenic center lies directly on the phosphorus atom, lead to high enantiomeric excesses when used as catalysts in asymmetric hydrogenation reactions. This hypothesis was disproven by the development of ligands with chiral carbon backbones. Although the exact mechanism of action of the phosphane ligands is not incontrovertibly determined to this day, they provide a simple entry to a large number of chiral compounds.     

Total synthesis of (R)-(+)-salsolidine by hydride addition to (R)-N-tert-butanesulfinyl ketimine

(R)-(+)-Salsolidine 1 of high enantiomeric purity was synthesized using the Pomeranz–Fritsch–Bobbitt methodology, in which the reduction (NaBH₄, DIBAL-H) of N-tert-butanesulfinyl ketimine, derived from 3,4-dimethoxyacetophenone, was the key step. The synthesis was completed in a sequence of reactions involving the removal of the chiral auxiliary, N-alkylation with 2,2-diethoxyethyl bromide and final cyclization/hydrogenolysis.     

Enantioselective Diels-Alder reactions of 3-(acyloxy)acrylates

Diels-Alder reactions with 3-(acyloxy)acrylates using chiral Lewis acid catalysts have been successfully carried out. These reactions proceed with high enantioselectivity when a chiral Lewis acid derived from Cu(OTf)₂ and a bisoxazoline is used. The facility of the reaction is dependent on the nature of the acyloxy group in the dienophile.     

Synthesis of chiral polymers containing thioetherified cinchonidinium repeating units and their application to asymmetric catalysis

A thiol-ene reaction of dithiol and two equivalents of cinchonidine afforded a thioetherified cinchonidine dimer. The dimer was treated with benzyl bromide to give a quaternary ammonium dimer. An ion exchange reaction of the cinchonidinium dimer and disodium disulfonate gave polymers containing chiral quaternary ammonium repeating units in their main-chain structures. Another type of chiral polymer was synthesized by quaternization polymerization. Repeated quaternization reactions between the thioetherified cinchonidine dimer and dihalides yielded chiral polymers containing cinchonidinium structures in their main chains. Both of these chiral polymers were successfully used as catalysts for the asymmetric alkylation of N-diphenylmethylene glycine tert-butyl ester. The chiral cinchonidinium polymers explored in this study showed excellent catalytic activity in asymmetric alkylation reactions and were reused several times without loss of activity.     

A modular design of ruthenium(II) catalysts with chiral C2-symmetric phosphinite ligands for effective asymmetric transfer hydrogenation of aromatic ketones

Hydrogen-transfer reduction processes are attracting increasing interest from synthetic chemists in view of their operational simplicity. The new chiral C₂-symmetric ligands N,N′-bis-[(1S)-1-sec-butyl-2-O-(diphenylphosphinite)ethyl]ethanediamide, 1 and N,N′-bis-[(1S)-1-phenyl-2-O-(diphenylphosphinite)ethyl]ethanediamide, 2 and the corresponding ruthenium complexes 3 and 4 have been prepared and their structures have been elucidated by a combination of multi-nuclear NMR spectroscopy, IR spectroscopy, and elemental analysis. ¹H–³¹P NMR, DEPT, ¹H–¹³C HETCOR, or ¹H–¹H COSY correlation experiments were used to confirm the spectral assignments. The catalytic activity of complexes 3 and 4 in transfer hydrogenation of acetophenone derivatives by iso-PrOH has also been studied. Under optimized conditions, these chiral ruthenium complexes serve as catalyst precursors for the asymmetric transfer hydrogenation of acetophenone derivatives in iso-PrOH and act as excellent catalysts, giving the corresponding chiral alcohols in 99% yield and up to 75% ee. This transfer hydrogenation is characterized by low reversibility under these conditions.     

An easy synthesis of robust polymer-supported chiral 1,1′-bi-(2-naphthol)s (BINOLs): application to the catalysis of the oxidation of prochiral thioethers to chiral sulfoxides

Polystyrene beads bearing chiral 1,1′-bi-(2-naphthol) (BINOL) moieties are readily prepared by Suzuki couplings between chiral 6-bromo-1,1′-bi-(2-naphthol)s and crosslinked polystyrene beads containing phenylboronic acid residues. With this method, no protecting groups for the phenolic residues are required; any boronic acid groups that do not take part in the Suzuki coupling are removed from the support by in situ hydrolysis, and the BINOL moieties are bound to the support via strong C–C bonds. To test the performance of the new polymer-supported (PS) BINOLs, they were reacted with titanium tetraisopropoxide to give catalysts for the oxidation of aryl methyl thioethers using t-butyl hydroperoxide in tetrahydrofuran at 0 °C. The expected sulfoxides were obtained in up to 91% ee. The results obtained with the present catalysts are comparable to those obtained with PS catalysts prepared using more elaborate syntheses, and that have the catalyst moieties bound to the support by potentially labile linking groups.