New selectivities from old catalysts. Occlusion of Grubbs’ catalysts in PDMS to change their reactions

This article describes new selectivities for Grubbs’ first and second generation catalysts when occluded in a hydrophobic matrix of polydimethylsiloxane (PDMS). Occlusion of catalysts in mm-sized slabs of PDMS is accomplished by swelling with methylene chloride then removing the solvent under vacuum. The catalysts are homogenously dissolved in PDMS yet remain catalytically active. Many substrates that react by olefin metathesis with Grubbs’ catalysts freely dissolved in methylene chloride also react by olefin isomerization with occluded catalysts. Eleven examples of substrates that exhibit dual reactivity by undergoing olefin isomerization with occluded catalysts and olefin metathesis with catalysts dissolved in methylene chloride are reported. Most of these substrates have olefins with allylic phosphine oxides, carbonyls, or ethers. Control experiments demonstrate that isomerization is occurring in the solvent by decomposition of the catalyst from a ruthenium carbene to a proposed ruthenium hydride. This work was extended by heating occluded Grubbs’ first generation catalyst to 100 °C in 90% MeOH in H₂O in the presence of various alkenes to transform the Grubbs’ catalyst into an isomerization catalyst for unfunctionalized olefins. This work demonstrates that occlusion of organometallic catalysts in PDMS has important implications for their reactions and can be used as a method to control which reactions they catalyze.     

Mechanistic comparison of ruthenium olefin metathesis catalysts: DFT insight into relative reactivity and decomposition behavior

The reaction mechanism and substrate-induced decomposition behavior of three ruthenium olefin metathesis catalysts, viz. first- and second-generation catalysts and the recently developed Phoban catalyst (“Phobcat”) are compared by constructing ΔG surfaces at 298.15 K and 1 atm for the complete ligand systems. From these calculations fundamental insight is gained into the reactivity and stability observed experimentally for the three catalysts. In particular, the higher conversions obtained for the first-generation derived Phobcat catalyst, compared to conventional first-generation catalysts, is attributed to its similarity to the second-generation catalysts instead of first-generation catalyst. Important differences between the calculated ΔG surfaces and previously reported total electronic energy (ΔE) surfaces for the metathesis mechanism with complete ligand complexes are discussed.     

Efficient dynamic kinetic resolution of secondary alcohols with a novel tetrafluorosuccinato ruthenium complex

Dynamic kinetic resolution (DKR) of a series of secondary alcohols has been conducted with a novel dinuclear ruthenium complex, bearing tetrafluorosuccinate and (rac)-BINAP ligands as the racemization catalyst. Novozym 435 has been used as the enzyme, and isopropyl butyrate as the acyl donor. Five substrates underwent DKR successfully: an aliphatic and an aromatic secondary alcohol, an aromatic alcohol with an electron-withdrawing substituent on the phenyl ring, an aromatic alcohol bearing an electron-donating substituent on the ring and a heteroaromatic secondary alcohol. The catalyst performed optimally at 70 °C. Typically the reaction reached complete conversion within 1 day with 0.1 mol % of racemization catalyst relative to the substrate. The addition of the ketone corresponding to the substrate stabilizes the active Ru complex and, therefore, increases the rate of the reaction.     

Stability of the first-generation Grubbs metathesis catalyst in a continuous flow reactor

Ethylene pretreatment of the (PCy₃)₂Cl₂RuCHPh catalyst (1) prior to cross-metathesis of ethylene and cis-2-butene to form propylene in the continuous flow reactor produced a direct effect on catalyst deactivation. Similar cis-2-butene pretreatment of the same catalyst exhibited far less change in the catalyst activity. These results support the assumption that the ruthenium methylidene intermediate generated from ethylene and 1 is unstable and promotes catalyst loss while ruthenium alkylidenes, e.g. derived from 2-butene, exhibit significantly enhanced stability and sustained catalyst integrity. Continuous removal of products in the continuous flow reactor was important for separating the catalyst decay and the catalyst deactivation caused by a terminal olefin, in this case propylene.The amount of produced propylene during the 1 lifespan was determined in a series of tests using identical catalyst concentrations ([Ru] = 60 ppm) in pentadecane while varying the olefin pretreatment times from 0 to 420 min. The catalyst turnover numbers in the cross-metathesis experiments proved inversely proportional to the duration of ethylene treatment prior to the reaction. The activity of 1 pre-exposed to ethylene closely matched with the activity of the catalyst that decayed in the reaction mixture containing ethylene and cis-2-butene for the same period of time. A significant contribution of the Ru-methylidene decay to the activity losses in metathesis reactions was demonstrated directly in the cross-metathesis reaction environment. The catalyst proved to be less sensitive to cis-2-butene pretreatment and showed turnover numbers for subsequent cross-metathesis essentially similar to the reference cross-metathesis test.     

Development of environmentally benign organometallic catalysis for drug discovery and its application

We have developed a novel organometallic catalysis and applied it to drug discovery. Two new catalysts were found, ruthenium hydride with a nitrogen-containing heterocyclic carbene (A) and an organopalladium catalyst supported on a sulfur-terminated semiconductor, gallium arsenide (001) (B). Both catalysts are environmentally benign, because A can yield indole derivatives with good atom economy, and B can catalyze the Mizoroki-Heck reaction more than 10 times with only trace amounts of leached palladium (ppb level). We also describe our synthetic study of nitrogen-containing heterocycles using ring-closing metathesis (RCM), such as chiral bicyclic lactams, azacycloundecenes, axially chiral macrolactams, 1,2-dihydroquinolines and indoles, including the development of silyl-enol ether ene metathesis, selective isomerization of terminal olefin, enamide metathesis and cycloisomerization and its application to the syntheis of 4 natural products, (-)-coniceine, (S)-pyrrolam A, angustureine, and fistulosin.     

Activated pyridinium-tagged ruthenium complexes as efficient catalysts for ring-closing metathesis

New pyridinium-tagged ruthenium catalysts have been synthesised to perform olefin metathesis in several media including both organic and aqueous solvents and room temperature ionic liquids (RTILs). High activity was obtained in the ring-closing metathesis (RCM) of a variety of di- or tri-substituted and/or oxygen-containing dienes. However, only fair levels of recycling combined with low to moderate residual ruthenium levels (25–173 ppm) have been observed showing clearly the difficulty of associating high activity and recyclability.     

Formation of chiral ionic liquids and imidazol-2-ylidene metal complexes from the proteinogenic aminoacid l-histidine

Treatment of the amino acid derivative Bz-His-OMe with excess n-propyl bromide gave the corresponding histidinium salt [Bz-His(n-propyl)₂-OMe⁺Br⁻]. It features a melting point of 39 °C and may serve as a useful readily available optically active ionic liquid. Its subsequent treatment with silver oxide gave the corresponding l-histidine derived chiral N-heterocyclic carbene complex [“(carbene)₂Ag · AgBr₂”]. Transmetallation by treatment with Pd(CH₃CN)₂Cl₂ or [Rh(cod)Cl]₂ led to the formation of the respective chiral late metal imidazol-2-ylidene complexes [“(carbene)₂PdCl₂”] and [“(carbene)RhCl(cod)”], respectively. Four diastereomers of the square planar palladium system were observed. Due to the additional chirality center in the l-histidine-derived “Arduengo-carbene ligand” two diastereomers of the rhodium carbene complex were formed.     

Catalytic cyclopropanation of olefins using copper(I) diphosphinoamines

Catalytic cyclopropanation reactions of olefins with ethyl diazoacetate were carried out using copper(I) diphosphinoamine (PPh₂)₂N(R) (R = ⁱPr, H, Ph and –CH₂–C₆H₄–CHCH₂) complexes at 40 °C in chloroform. High yields of the cyclopropanes were obtained in all cases. The rate of the reaction was influenced by the nuclearity of the complex and the binding mode of the ligand which was either bridging or chelating. Comparison of isostructural complexes shows that the rate follows the order R = ⁱPr > H > Ph, where R is the substituent on the N. However, cyclopropane formation versus dimerization of the carbene, and trans to cis ratios of cyclopropane was similar in all cases. The nearly identical selectivity for different products formed was indicative of a common catalytic intermediate. A labile “copper–olefin” complex which does not involve the phosphine or the counterion is the most likely candidate. The differences in the reaction rates for different complexes are attributed to differences in the concentration of the catalytically active species which are in equilibrium with the catalytically inactive copper–phosphinoamine complex. To test the hypothesis a diphosphinoamine polymer complexed to copper(I) was used as a heterogeneous catalyst. Leaching of copper(I) and deactivation of the catalyst confirmed the proposed mechanism.     

Development of isomerization and cycloisomerization with use of a ruthenium hydride with N-heterocyclic carbene and its application to the synthesis of heterocycles

A pure ruthenium hydride complex with N-heterocyclic carbene (NHC) ligand was efficiently generated from the reaction of a second-generation Grubbs ruthenium catalyst with vinyloxytrimethylsilane and unambiguously characterized. This ruthenium hydride complex showed high catalytic activity for the selective isomerization of terminal olefin and for the cycloisomerization of 1,6-dienes. These reactions of N-allyl-o-vinylaniline lead to novel synthetic methods for heterocycles such as indoles and 3-methylene-2,3-dihydroindoles, which are useful synthons for bioactive natural products. These procedures address an important issue in diversity-oriented synthesis.     

Catalytic Friedel–Crafts allylation using Zn(II) triflimidate

The activity of various metallic triflates and triflimidates in the Friedel–Crafts allylation of activated aromatic rings was examined. Zinc bis(trifluoromethylsulfonyl)amide was proved to be a good catalyst in the model reaction with anisole and prenyl acetate. The Friedel–Crafts allylation reaction of various aryl derivatives with allyl acetates was efficiently catalysed under mild conditions, using 3 mol% of Zn(NTf₂)₂ as the catalyst, without solvent, at 100 °C. The desired ortho and para mono-allylated products were selectively obtained in good yields. The para isomer was always favoured.     

Synthesis and structures of N,N,O-scorpionatoruthenium(II) complexes featuring “non-innocent” o-benzoquinonediimines

A series of ruthenium(II) complexes bearing redox-active o-benzoquinonediimines (o-bqdi) was synthesized and characterized. Reactions of [RuCl(bdmpza)(η⁴-cod)] (bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetato; cod = 1,5-cyclooctadiene) and 1,2-benzenediamines such as o-phenylenediamine (o-pdaH₂), 4,5-difluoro-1,2-benzenediamine (o-pdaF₂), 4,5-dichloro-1,2-benzenediamine (o-pdaCl₂), and 4,5-dimethoxy-1,2-benzenediamine (o-pda(OMe)₂) afforded [RuCl(bdmpza)(o-bqdiX₂)] (X = H, 1; X = F, 2; X = Cl, 3; X = OMe, 4).     

Asymmetric hydrogenation of α,β-unsaturated ketones catalyzed by Ru–TPPTS–(S,S)-DPENDS complex in ionic liquids

The asymmetric hydrogenation of α,β-unsaturated ketones catalyzed by the achiral ruthenium monophosphine complex RuCl₂(TPPTS)₂ [TPPTS: P(m-C₆H₄SO₃Na)₃] modified by (S,S)-DPENDS [disodium salt of sulfonated (S,S)-1,2-diphenyl-1,2-ethylene-diamine] was investigated in ionic liquid [RMIM]Ts (1-alkyl-3-methylimidazolium p-methylphenylsulfonates, R = ethyl, butyl, octyl, dodecyl). Chemoselectivity of 100% and 75.9% ee were obtained for benzalacetone under the optimized conditions. The resulting products can be easily separated from the catalyst immobilized in ionic liquid [EMIM]Ts by extraction with n-hexane, while the catalyst can be reused seven times without the loss of catalytic activity and enantioselectivity. Especially, the addition of water can improve the performance of the catalyst.     

Lewis acid-assisted olefin cross-metathesis reaction: an efficient approach for the synthesis of glycosidic-pyrroloquinolinone based novel building blocks of camptothecin and evaluation of their antitumor activity

A series of glycosidic-pyrroloquinolinone based novel building blocks of camptothecin (2a–g) were synthesized via Lewis acid-assisted olefin cross-metathesis reaction using Ti(OⁱPr)₄ 30 mol % and 10 mol % of Grubb’s second generation catalyst with good to excellent yields. Most of these compounds exhibited significant growth inhibitory effects on all the tested cancer cell lines and three compounds (2c, 2d and 2e) showed potent cytotoxic activity.     

Planar chiral imidazolium salts based on [2.2]paracyclophane in the asymmetric rhodium-catalyzed 1,2-addition of arylboronic acids to aldehydes

A series of planar chiral imidazolium salts derived from [2.2]paracyclophane have been synthesized and characterized. By using these imidazolium salts as carbene precursors, the Rh-catalyzed 1,2-addition of arylboronic acids to aldehydes proceeded readily with low catalyst loadings (0.03–0.3 mol %) and gave a variety of chiral diarylmethanols in excellent yields and moderate enantioselectivities.     

Olefin metathesis catalyst bearing a chelating phosphine ligand

An improved synthetic procedure for the complex (SPY-5-34)-dichloro-(κ²(C,P)-diphenyl-(2-benzylidene)-phosphine)-(1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydro-imidazol-2-ylidene)-ruthenium (2) was elaborated and the title compound was tested as latent initiator in Ring Opening Metathesis Polymerization (ROMP) and as catalyst for Ring-Closing Metathesis (RCM) at elevated temperatures. While not particularly suited as latent initiator for ROMP, exhibiting a switching temperature of only 42 °C in the polymerization of a typical norbornene derivative, 2 shows an appealing performance in RCM of α,ω-dienes at higher temperatures.     

Sc(OTf)3/TsOH: a highly efficient catalytic system for the synthesis of 2,6-dioxabicyclo[3,2,1]octane derivatives

A variety of aldehydes undergo a tandem acetalization and intramolecular Prins cyclization with pent-4-ene-1,2-diol in the presence of 5 mol % scandium triflate and 15 mol % p-toluenesulfonic acid (TsOH) in dichloroethane at 80 °C to produce the corresponding bicyclic ethers, that is, 2,6-dioxabicyclo[3,2,1]octane derivatives in good yields and with high selectivity. The salient features of this methodology are higher yields, lower catalyst loadings, and faster reaction times. The combination of Sc(OTf)₃ and TsOH (1:3) was found to be more effective than either Sc(OTf)₃ or TsOH alone.     

First examples of dipyrido[1,2-c:2′,1′-e]imidazolin-7-ylidenes serving as NHC-ligands: Synthesis,properties and structural features of their chromium and tungsten pentacarbonyl complexes

The first use of dipyridocarbenes as Arduengo–Wanzlick type carbene ligands for transition metal complexes is reported. The complexes M(CO)₅L (L = dipyridoimidazolinylidene, di-tert-butyldipyridoimidazolinylidene, M = Cr, W) were synthesized and their spectroscopic and structural properties compared with the literature known N-heterocyclic carbene (NHC) group 6 metal pentacarbonyl complexes. This reveals that the ¹³C NMR carbene signals of theses complexes with dipyrido carbene ligands show the strongest high-field shift ever observed for M(CO)₅(NHC) (M = Cr, W) complexes. The structural characterization shows alternating single and double bonds in the conjugated dipyrido moiety of the ligand.     

Lipase catalyzed enantioselective desymmetrization of a prochiral pentane-1,3,5-triol derivative

The enantioselective desymmetrization of the prochiral 3-O-silyl protected pentanetriol derivative 3 was carefully investigated. At −10 °C, the bacterial lipase from Burkholderia cepacia immobilized on ceramic particles led to monoacetate (S)-4 in 52% yield and >99.9% ee. At a reaction temperature of −40 °C the yield and enantioselectivity were even higher, but the reaction time was very long. Theoretical simulations of the reaction progress indicated an enantioselectivity of 25:1 at −10 °C and 35:1 at −40 °C. (S)-4 was converted into the enantiomerically pure building block 5-azidopentane-1,3-diol (S)-7 in two steps. The absolute configuration of (S)-7 was determined by exciton-coupled circular dichroism (ECCD) of diester (S)-8.     

Effect of silver modification on structure and catalytic performance of Ni-Mg/diatomite catalysts for edible oil hydrogenation

Silver modified Mg-Ni/diatomite materials with ratios of SiO₂/Ni = 1.07 and Mg/Ni = 0.1, differing in Ag content (Ag/Ni = 0.025 and 0.1) were prepared by the precipitation–deposition method. The effects of silver presence and content on the structure, morphology, texture and H₂-adsorption capacity of the obtained precursors were studied by X-ray diffraction, scanning electron microscopy, Hg-porosimetry and H₂-chemisorption techniques. The catalytic performance of the corresponding catalysts in the soybean oil hydrogenation was investigated. The increase of the silver loading resulted in the development of macroporosity and increase in the total sample porosity. The decrease of both H₂-adsorption capacity and hydrogenation activity are related to the metallic silver covering and blocking effects on the Ni²⁺ species, thus hampering the access of hydrogen. The decrease of hydrogenation activity and favorable limiting of cis–trans isomerization on the silver modified catalyst are explained by Horiuti–Polanyi mechanism based on the assumption that hydrogenation and isomerization proceed at the same active metallic nickel sites via half-hydrogenated intermediates.It was shown that the adjustment of the catalyst composition by changing the content of silver modifier offers the possibility to control the total amount of solid fat content, stearic acid and detrimental trans fatty acids in the hydrogenated derivatives. The catalyst with higher silver content is proposed as a promising candidate for selective edible oil hydrogenation catalyst.     

Enantiopure trans-1-amino-2-(arylsulfanyl)cyclohexanes: novel chiral motifs for ligands and organocatalysts

In order to obtain the title compounds (1R,2R)-cyclohexane-1,2-diol was stereoselectively converted into cis-(1R,2S)-2-(arylsulfanyl)cyclohexanols and these products were submitted to the nucleophilic substitution via the Mitsunobu reaction (HN₃, DEAD). Reduction of the isolated azides gave the desired trans-(1S,2S)-1-amino-2-(arylsulfanyl)cyclohexanes. The (1S,2S)-1-amino-2-(2-aminophenylsulfanyl)cyclohexanes thus prepared were reacted with 3,5-bis(trifluoromethyl)phenyl isothiocyanate to furnish the respective bis-thiourea compounds. An application of a derivative of this type as an organocatalyst (20 mol %) in the Baylis–Hillman reaction gave the respective product in up to 93% ee.