Combining Brillouin spectroscopy and laser-SAW technique for elastic property characterization of thick DLC films

Surface Brillouin spectroscopy (SBS) has been widely used for elastic property characterization of thin films. For films thicker than 500 nm, however, the wavelength of surface acoustic wave in the frequency range available for SBS is smaller than film thickness, and the SBS measures only the Rayleigh wave of the film. The laser-SAW technique, on the other hand, measures only the low-frequency portion of the surface acoustic wave dispersion and can estimate only one elastic modulus of the film (typically Young's modulus). In this work, we have combined the two methods to determine both Young's modulus and Poisson's ratio of a diamond-like carbon (DLC) film. It was found that reasonable estimates can be obtained for the longitudinal wave velocity, shear wave velocity, and Young's modulus of the film. The Poisson's ratio, however, still has a relatively large measurement error.     

Surface waves and mode conversion at a surface coated with an elastic heavy layer

A surface wave of frequency lying within bulk band of transverse waves is found in an elastic medium coated with a thin layer endowed with a surface mass density, surface Young's modulus and surface bending modulus. The wave is a particular case of surface resonance with infinite lifetime. In materials with negative Poisson's ratio (auxetics) the wave exists even for coating material with zero bending modulus, whereas with positive Poisson's ratio it requires the surface bending modulus to be larger than the surface Young's modulus. The manifestation of this wave in the reflection coefficient seems promising for fabrication of devices showing monochromator properties.     

Temperature-dependent elastic moduli of lead telluride-based thermoelectric materials

In the open literature, reports of mechanical properties are limited for semiconducting thermoelectric materials, including the temperature dependence of elastic moduli. In this study, for both cast ingots and hot-pressed billets of Ag-, Sb-, Sn- and S-doped PbTe thermoelectric materials, resonant ultrasound spectroscopy (RUS) was utilized to determine the temperature dependence of elastic moduli, including Young's modulus, shear modulus and Poisson's ratio. This study is the first to determine the temperature-dependent elastic moduli for these PbTe-based thermoelectrics, and among the few determinations of elasticity of any thermoelectric material for temperatures above 300 K. The Young's modulus and Poisson's ratio, measured from room temperature to 773 K during heating and cooling, agreed well. Also, the observed Young's modulus, E, versus temperature, T, relationship, E(T) = E ₀(1–bT), is consistent with predictions for materials in the range well above the Debye temperature. A nanoindentation study of Young's modulus on the specimen faces showed that both the cast and hot-pressed specimens were approximately elastically isotropic.     

Ca0.5Sr0.5TiO3弹性和热学性质的第一性原理研究

利用能量最小原理, 确定了Ca_0.5Sr_0.5TiO₃晶体中4c位置的Ca/Sr原子对称分布, 建立了Ca_0.5Sr_0.5TiO₃稳定的晶体结构, 在此基础上利用基于密度泛函理论第一性原理的平面波超软赝势方法, 采用局域密度近似和广义梯度近似函数, 计算了Ca_0.5Sr_0.5TiO₃的晶格参数、弹性常数、体弹模量、剪切模量、杨氏模量、泊松比, 并基于Christoffel方程的本征值研究了平面声波的特征, 基于Cahill和Cahill-Pohl模型研究了最小热导率的特征. 计算结果表明: Ca_0.5Sr_0.5TiO₃晶格参数和实验值很接近, 体弹模量大于剪切模量, [100], [010], [001]晶向的杨氏模量、泊松比、普适弹性常数(A^U)以及杨氏模量三维图均显示了弹性各向异性; 平面声波在(010), (001)平面呈现各向异性, 在(100)平面呈现各向同性, 平面声波大小与平均横波和平均纵波的数值很接近. Cahill模型最小热导率在各平面呈现各向同性, Cahill-Pohl模型最小热导率在高温时趋于恒定. 准谐德拜模型下Ca_0.5Sr_0.5TiO₃ 晶体的摩尔热容和热膨胀系数与CaTiO₃晶体的接近, 并且高温下具有稳定的热膨胀性能. 计算所得禁带宽度为2.19 eV, 导带底主要是Ti-3d与O-2p态电子贡献; 由电荷布居和电荷密度图理论证实Ca_0.5Sr_0.5TiO₃具有稳定的Ti-O八面体结构.     

Pressure-induced structural phase transition and elastic properties of rare earth Pr chalcogenides and pnictides

Pressure-induced structural aspects and elastic properties of NaCl-type (B1) to CsCl-type (B2) structure in praseodymium chalcogenides and pnictides are presented. Ground-state properties are numerically computed by considering long-range Coulomb interactions, Hafemeister and Flygare type short-range overlap repulsion, and van der Waals interaction in the interionic potential. From the elastic constants, Poisson's ratio ν, the ratio R_G/B of G (shear modulus) over B (bulk modulus), anisotropy parameter, shear and Young's moduli, Lamé's constant, Kleinman parameter, elastic wave velocity and thermodynamical property such as Debye temperature are calculated. Poisson's ratio ν and the ratio R_G/B indicate that PrX and PrY are brittle in B1 phase and ductile in B2 phase. To our knowledge, this is the first quantitative theoretical prediction of the ductile (brittle) nature of praseodymium chalcogenides and pnictides and still awaits experimental confirmation.     

Ab initio study of structural,elastic, and high-pressure properties of rubidium halides RbX (X = F,Cl, Br and I)

We present first-principle calculations on the structural, elastic, and high-pressure properties of rubidium halides compounds, using the pseudo-potential plane-waves approach based on density functional theory, within the generalized gradient approximation. Results are given for lattice constant, bulk modulus and its pressure derivative. The pressure transition at which these compounds undergo structural phase transition from NaCl-type to CsCl-type structure are calculated and compared with previous calculations and available experimental data. The elastic constants and their pressure dependence are calculated using the static finite strain technique. We derived the bulk and shear moduli, Young's modulus and Poisson's ratio for ideal polycrystalline RbF, RbCl, RbBr, and RbI aggregates. We estimated the Debye temperature of these compounds from the average sound velocity.     

Electronic structure and elastic properties of scandium carbide and yttrium carbide: A first principles study

We have studied the electronic, structural, and elastic properties of scandium carbide and yttrium carbide by means of accurate first principles total energy calculations using the full-potential linearized plane wave method (FP-LAPW). We have used the generalized gradient approximation (GGA) for the exchange and correlation potential. Volume optimization, energy band structure, and density of states (DOS) of the systems are presented. The second order elastic constants have been calculated and other related quantities such as the Zener anisotropy factor, Poisson's ratio, Young's modulus, Kleinman parameter, Debye temperature, and sound velocities have been determined. The band gap calculation shows that YC is relatively more ionic than ScC.     

First-Principles Investigations on Structural, Elastic, Electronic, and Optical Properties of Tetragonal HfSiO4

Structural parameters, elastic, mechanical, electronic, chemical bonding, and optical properties of tetragonal HfSiO₄ have been investigated using the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory. The ground-state properties obtained by minimizing the total energy are in agreement with the available experimental and theoretical data. This compound is found to be mechanically stable, and we have obtained the bulk, shear, and Young's modulus; Poisson's coefficient; and Lamé's constants. We have estimated the Debye temperature of tetragonal HfSiO₄ from the acoustic velocity. Electronic and chemical bonding properties have been studied. Moreover, the complex dielectric function, refractive index, extinction coefficient, absorption coefficient, energy-loss spectrum, optical reflectivity, and complex conductivity function are calculated and analyzed.     

Structural and elastic properties of TiN under high pressure

We have investigated the structural and elastic properties of TiN at high pressures by the first-principles plane wave pseudopotential density functional theory method at applied pressures up to 45.4 GPa. The obtained normalized volume dependence of the resulting pressure is in excellent agreement with the experimental data investigated using synchrotron radial x-ray diffraction (RXRD) under nonhydrostatic compression up to 45.4 GPa in a diamond-anvil cell. Three independent elastic constants at zero pressure and high pressure are calculated. From the obtained elastic constants, the bulk modulus, Young's modulus, shear modulus, acoustic velocity and Debye temperature as a function of the applied pressure are also successfully obtained.     

Structural parameters, electronic structures, elastic stiffness and thermal properties of M2PC (M=V, Nb, Ta)

Using pseudo-potential plane-wave method based on the density functional theory in conjunction with the generalized gradient approximation, structural parameters, electronic structures, elastic stiffness and thermal properties of M₂PC, with M=V, Nb, Ta, were studied. The optimized zero pressure geometrical parameters are in good agreement with the available results. Pressure effect, up to 20 GPa, on the lattice parameters was investigated. Electronic properties are studied throughout the calculation of densities of states and band structures. The elastic constants and their pressure dependence were predicted using the static finite strain technique. We performed numerical estimations of the bulk modulus, shear modulus, Young's modulus, Poisson's ratio and average sound velocity for ideal polycrystalline M₂PC aggregates in framework of the Voigt-Reuss-Hill approximation. We estimated the Debye temperature and the theoretical minimum thermal conductivity of M₂PC.     

Mechanical,elastic, anisotropy,and electronic properties of monoclinic phase of m-Si_xGe_(3-x)N_4

The structural,mechanical,elastic anisotropic,and electronic properties of the monoclinic phase of m-Si_3N_4,mSi_2GeN_4,m-SiGe_2N_4,and m-Ge_3N_4are systematically investigated in this work.The calculated results of lattice parameters,elastic constants and elastic moduli of m-Si_3N_4and m-Ge_3N_4are in good agreement with previous theoretical results.Using the Voigt–Reuss–Hill method,elastic properties such as bulk modulus B and shear modulus G are investigated.The calculated ratio of B/G and Poisson’s ratio v show that only m-SiGe_2N_4should belong to a ductile material in nature.In addition,m-SiGe_2N_4possesses the largest anisotropic shear modulus,Young’s modulus,Poisson’s ratio,and percentage of elastic anisotropies for bulk modulus ABand shear modulus AG,and universal anisotropic index AUamong m-Si_xGe_(3-x)N_4(x=0,1,2,3.)The results of electronic band gap reveal that m-Si_3N_4,m-Si_2GeN_4,m-SiGe_2N_4,and m-Ge_3N_4 are all direct and wide band gap semiconducting materials.     

First-principles studies of structural,mechanical, electronic,optical properties and pressure-induced phase transition of CuInO2 polymorph

Using the first-principles density-functional theory within the generalized gradient approximation (GGA), we have investigated the structural, elastic, mechanical, electronic, and optical properties and phase transition of CuInO₂. Structural parameters including lattice constants and internal parameter, pressure effects and phase transition pressure were calculated. We have obtained the elastic coefficients, bulk modulus, shear modulus, Young's modulus and Poisson's ratio. We find that two phases of CuInO₂ are indirect band gap semiconductors (F–Γ and H–Γ for 3R and 2H, respectively). Optical properties, including the dielectric function, refractive index, extinction coefficient, reflectivity, absorption coefficient, loss function and optical conductivity have been obtained for radiations of up to 30 eV.     

Theoretical investigations on structural, elastic and electronic properties of thallium halides

Theoretical investigations on structural, elastic and electronic properties, viz. ground state lattice parameter, elastic moduli and density of states, of thallium halides (viz. TlCl and TlBr) have been made using the full potential linearized augmented plane wave method within the generalized gradient approximation (GGA). The ground state lattice parameter and bulk modulus and its pressure derivative have been obtained using optimization method. Young's modulus, shear modulus, Poisson ratio, sound velocities for longitudinal and shear waves, Debye average velocity, Debye temperature and Grüneisen parameter have also been calculated for these compounds. Calculated structural, elastic and other parameters are in good agreement with the available data.     

α-Ti2Zr高压物性的第一性原理计算研究

基于密度泛函理论的第一性原理计算获得了α-Ti₂Zr的晶体结构、弹性常数、德拜温度和电子分布情况, 研究了它们与压力的关系. 计算得到的晶体结构参数与实验值一致. 运用有限应变方法计算得到了α-Ti₂Zr的体积模量B、剪切模量G、杨氏模量E和泊松比σ. B和E的零压值分别为101.2和35.6 GPa. G/B的值较小, 并且随着压力的增加而减小, 表明α-Ti₂Zr具有优异的延展性. 基于弹性常数得到平均声速, 从而获得了德拜温度Θ=321.7 K. 通过解Christoffel方程获得的压缩波和剪切波数据揭示α-Ti₂Zr具有较强的各向异性. 此外, 压力诱导电子从s轨道到d轨道的转移说明在一定压力下α-Ti₂Zr将转变为β相. 关键词： 第一性原理 α-Ti₂Zr')" href="#">α-Ti₂Zr 物性 高压     

Elastic band structures of two-dimensional solid phononic crystal with negative Poisson's ratios

In this paper, the elastic band structures of two-dimensional solid phononic crystals (PCs) with both negative and positive Poisson's ratios are investigated based on the finite difference domain method. Systems with different combinations of mass density ratio and shear modulus ratio, filling fractions and lattices are considered. The numerical results show that for the PCs with both large mass density ratio and shear modulus ratio, the first bandgap becomes narrower with its upper edge becoming lower as Poisson's ratio of the scatterers decreases from −0.1 to −0.9. Generally, introducing the material with a negative Poisson's ratio for scatterers will make this bandgap lower and narrower. For the PCs with large mass density ratio and small shear modulus ratio, the first bandgap becomes wider with Poisson's ratio of the scatterers decreasing and that of the host increasing. It is easy to obtain a wide low-frequency bandgap by embedding scatterers with a negative Poisson's ratio into the host with a positive Poisson's ratio. The PCs with large filling fractions are more sensitive to the variations of Poisson's ratios. Use of negative Poisson's ratio provides us a way of tuning bandgaps.     

Theoretical study on the structural,mechanical, electronic properties and QTAIM of CrB_4 as a hard material

Using the first-principles calculations based on spin density functional theory(DFT), we investigate the structure,elastic properties, and electronic structure of Pnnm-CrB4. It is found that Pnnm-CrB_4 is thermodynamically and mechanically stable. The calculated elastic properties such as the bulk modulus, shear modulus, Young's modulus, and Poisson's ratio indicate that CrB_4 is an incompressible material. Vicker's hardness of Pnnm-CrB_4 is estimated to be 26.3 GPa, which is in good agreement with the experimental values. The analysis of the investigated electronic properties shows that PnnmCrB_4 has the metallic character and there exist strong B–B and Cr–B bonds in the compound, which are further confirmed by Bader's quantum theory of atoms in molecules(QTAIM). Thermodynamic properties are also investigated.     

Electronic structure,elastic and thermodynamic properties of α-phase Na3N under pressure from first principles

The structural, electronic, elastic and thermodynamic properties of α-phase Na₃N under pressure are investigated by performing first principles calculations within generalized gradient approximation. The elastic constants, bulk modulus, shear modulus, Young's modulus, and Poisson's ratio dependencies on pressure are also calculated. The thermodynamic properties of the α-phase Na₃N are calculated using the quasi-harmonic Debye model. The dependencies of the heat capacity and the thermal expansion coefficient, as well as the Grüneisen parameter on pressure and temperature are investigated systematically in the ranges of 0–1 GPa and 0–100 K.     

Surface Brillouin scattering of opaque solids and thin supported films

Surface Brillouin scattering (SBS) has been used successfully for the study of acoustic excitations in opaque solids and thin supported films, at both ambient and high temperatures. A number of different systems have been investigated recently by SBS including crystalline silicon, amorphous silicon layers produced by ion bombardment and their high temperature recrystallisation, vanadium carbides, and a nickel-based superalloy. The most recent development includes the measurement of a supported gold film at high pressure. The extraction of the elastic constants is successfully accomplished by a combination of the angular dependence of surface wave velocities and the longitudinal wave threshold within the Lamb shoulder. The application of surface Green's function methods successfully reproduces the experimental SBS spectra. The discrepancies often observed between surface wave velocities and by ultrasonics measurements have been investigated and a detailed correction procedure for the SBS measurements has been developed.     

Ab initio study of the structural,electronic and elastic properties of AgSbTe2, AgSbSe2, Pr3AlC,Ce3AlC,Ce3AlN,La3AlC and La3AlN compounds

In this paper, we study the structural, electronic and elastic properties of the ternary AgSbTe₂, AgSbSe₂, Pr₃AlC, Ce₃AlC, Ce₃AlN, La₃AlC and La₃AlN compounds using the full-potential linearized augmented plane wave (FP-LAPW) scheme and the pseudopotential plane wave (PP-PW) scheme in the frame of generalized gradient approximation (GGA). Results are given for the lattice parameters, bulk modulus, and its pressure derivative. The calculated lattice parameters are in good agreement with experimental results. We have determined the full set of first-order elastic constants, shear modulus, Young's modulus and Poisson's ratio of these compounds. Also, we have presented the results of the band structure, densities of states, it is found that this compounds metallic behavior, and a negative gap Г→R for Pr₃AlC. The analysis charge densities show that bonding is of covalent–ionic and ionic nature for AgSbSe₂ and AgSbTe₂ compounds.     

First-principles study of structural,elastic, lattice dynamical and thermodynamical properties of GdX (X = Bi,Sb)

The results are presented of first-principles calculations of the structural, elastic and lattice dynamical properties of GdX (X = Bi, Sb). In particular, the lattice parameters, bulk modulus, phonon dispersion curves, elastic constants and their related quantities, such as Young's modulus, Shear modulus, Zener anisotropy factor, Poisson's ratio, Kleinman parameter, and longitudinal, transverse and average sound velocities, were calculated and compared with available experimental and other theoretical data. The temperature and pressure variations of the volume, bulk modulus, thermal expansion coefficient, heat capacities, Grüneisen parameter and Debye temperatures were predicted in wide pressure (0?50 GPa) and temperature ranges (0–500 K). The plane-wave pseudopotential approach to the density-functional theory within the GGA approximation implemented in VASP (Vienna ab initio simulation package) was used in all computations.