A Circular Indenter on a Piezoelectric Layer

This paper investigates a piezoelectric layer with a rigid indenter on its surface. Exact solution is given for a piezoelectric medium whose thickness is considerably larger than the diameter of the indenter. Different electrical boundary conditions that employ conducting or insulating indenters are presented. Effect of the permittivity of air (which surrounds the piezoelectric medium) is considered and is found to be negligible. Expressions for the singular mechanical and electric fields near the indenter front are established. Those expressions are useful for investigating the possible failure behavior of piezoelectric material near the indenter front. In addition, a numerical solution technique for an indentured piezoelectric layer of finite thickness is also given.     

Polymer indentation: Numerical analysis and comparison with a spherical cavity model

Three dimensional analyses of indentation of a polymer by a rigid indenter are carried out. The polymer is characterized by a finite strain elastic-viscoplastic constitutive relation and the calculations are carried out with a dynamic finite element program used to simulate quasi-static behavior. Two types of indenter are considered; a conical indenter and a pyramidal indenter. For each indenter type, different values of the sharpness of the indenter are considered and two rates of indentation are analyzed. Significant sink-in is found to occur in all cases considered. The amount of sink-in is found to be smaller for sharper indenters. The calculated values of both the nominal and true hardness do not differ significantly for the two indenter shapes. An expanding spherical cavity model is also considered and the predictions of this model are compared with the finite element results for various indenter shapes and indentation rates. The spherical cavity model is found to give fairly good agreement with the predictions of the finite element analyses for the nominal polymer hardness for both indenter shapes.     

高温仪器化压入测试中热接触对位移测量漂移的影响

基于对室温压头和热试样接触后传热过程的分析, 重点研究热接触引起的压头基托热膨胀对高温仪器化压入测试中位移测量漂移的影响. 首先, 通过热传导理论分析, 获得热接触后基托内温度场分布的解析解, 进而研究基托热膨胀引起的位移测量漂移量; 然后, 建立有限元分析模型, 数值模拟高温仪器化压入过程, 验证理论模型的准确性. 研究发现, 压头与热试样接触面间的热传导性质显著影响基托内的温度场分布; 对于不同材料的试样, 接触面间传热性能不同, 基托的热膨胀量差异可以达到几个数量级. 研究结果有助于优化高温压入测试程序, 提高测试的可靠性.      

The scattering of harmonic elastic anti-plane shear waves by a finite crack in infinitely long strip using the non-local theory

In this paper, the scattering of harmonic anti-plane shear waves by a finite crack in infinitely long strip is studied using the non-local theory. The Fourier transform is applied and a mixed boundary value problem is formulated. Then a set of dual integral equations is solved using the Schmidt method instead of the first or the second integral equation method. A one-dimensional non-local kernel is used instead of a two-dimensional one for the anti-plane dynamic problem to obtain the stress occurring at the crack tips. Contraty to the classical elasticity solution, it is found that no stress singularity is present at the crack tip. The non-local dynamic elastic solutions yield a finite hoop stress at the crack tip, thus allowing for a fracture criterion based on the maximum dynamic stress hypothesis. The finite hoop stress at the crack tip depends on the crack length, the width of the strip and the lattice parameter. Supported by the Post Doctoral Science Foundation of Heilongjiang Province, the Natural Science Foundation of Heilongjiang Province and the National Foundation for Excellent Young Investigators.     

Investigation of the Scattering of Harmonic Elastic Waves by Two Collinear Symmetric Cracks Using the Non-Local Theory

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｌａｓｔｆｏｕｒｄｅｃａｄｅｓｈａｖｅｗｉｔｎｅｓｓｅｄｔｈｅｉｎａｕｇｕｒａｔｉｏｎｏｆａｎｏｖｅｌｔｈｅｏｒｙｏｆｍａｔｅｒｉａｌｂｏｄｉｅｓ,ｎａｍｅｄｔｈｅｎｏｎ＿ｌｏｃａｌｍｅｃｈａｎｉｃｓ.ＴｈｉｓｗａｓｄｏｎｅｐｒｉｍａｒｉｌｙｄｕｅｔｏｔｈｅｅｆｆｏｒｔｓｏｆＥｄｅｌｅｎ[1],Ｅｒｉｎｇｅｎ[2 ],ＧｒｅｅｎａｎｄＲｉｖｌｉｎ[3].Ａｃｃｏｒｄｉｎｇｔｏｔｈｅｎｏｎ＿ｌｏｃａｌｔｈｅｏｒｙ ,ｔｈｅｓｔｒｅｓｓａｔａｐｏｉｎｔＸｉｎａｂｏｄｙｄｅｐｅｎｄｓｎｏ…     

Finite deformation swelling of a temperature-sensitive hydrogel cylinder under combined extension-torsion

The swelling behavior of a temperature-sensitive poly-N-isopropylacrylamide(PNIPAM) hydrogel circular cylinder is studied subjected to combined extension-torsion and varied temperature. In this regard, a semi-analytical solution is proposed for general combined loading. A finite element(FE) analysis is conducted, subjecting a hydrogel cylinder to the combined extension-torsion and the varied temperature to evaluate the validity and accuracy of the solution. A user-defined UHYPER subroutine is de...     

Effects of thickness on the largely-deformed JKR (Johnson–Kendall–Roberts) test of soft elastic layers

The paper aimed to study the effect of large deformation and material nonlinearity on the adhesive contact between a smooth rigid spherical indenter and a Neo-Hookean layer of finite thickness, for the cases of the layer thickness/indenter radius ratio between 1 and 2. Our analysis was based on the large-deformation JKR (LDJKR) theory, which models the adhesive contact of two elastic solids in large-deformation regime by knowing the solution of the corresponding non-adhesive contact problem. In this paper, the non-adhesive contact between a spherical indenter and a Neo-Hookean layer was solved by finite element analysis. Combined these numerical results and the LDJKR theory, approximate analytic expressions of the applied load and displacement of adhesive contact of Neo-Hookean layers were obtained. The effects of layer thickness were also discussed.     

Investigation of the Dynamic Behavior of a Griffith Crack in a Piezoelectric Material Strip Subjected to the Harmonic Elastic Anti-plane Shear Waves by Use of the Non-local Theory

In this paper, the dynamic behavior of a Griffith crack in a piezoelectric material strip subjected to the harmonic anti-plane shear waves is investigated by use of the non-local theory for impermeable crack surface conditions. To overcome the mathematical difficulties, a one-dimensional non-local kernel is used instead of a two-dimensional one for the anti-plane dynamic problem to obtain the stress and the electric displacement near at the crack tip. By means of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations. These equations are solved using the Schmidt method. Contrary to the classical solution, it is found that no stress and electric displacement singularity is present near the crack tip. The non-local dynamic elastic solutions yield a finite hoop stress near the crack tip, thus allowing for a fracture criterion based on the maximum dynamic stress hypothesis. The finite hoop stress at the crack tip depends on the crack length, the thickness of the strip, the circular frequency of incident wave and the lattice parameter.     

Determination of material properties using nanoindentation and multiple indenter tips

Nanoindentation is a useful method to probe the material properties of a solid. Its effective use lies in interpreting the data collected from a nanoindentation experiment with an associated analytical/numerical solution of the corresponding problem configuration. In this paper, a parametric finite element study has been performed to develop a new procedure for extracting elastic–plastic properties of a material through nanoindentation experiments with a substantially improved accuracy for the elastic properties of a elastic–plastic solid. The procedure involves data collected through the use of two, different, nanoindenter tips. Non-dimensional functions were constructed for two different indenter geometries to show that test results from multiple indenters, when appropriately manipulated, deliver superior results, compared to using one indenter. The material was assumed to be an isotropic elastic–plastic solid with power law hardening. Friction between the indenter and the material was included in the cases studied. The ratio of yield strength to elastic modulus was assumed to be in the range 0.0005–0.02 and the hardening coefficient was assumed to be between 0 and 0.4. Poisson’s ratio was fixed at 0.3.     

Investigation of a griffith crack subject to uniform tension using the non-local theory by a new method

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｓｅｖｅｒａｌｐｒｅｖｉｏｕｓｐａｐｅｒｓ［１,２,３］,Ｅｒｉｎｇｅｎｄｉｓｃｕｓｓｅｄｔｈｅｓｔａｔｅｏｆｓｔｒｅｓｓｎｅａｒｔｈｅｔｉｐｏｆａｓｈａｒｐｌｉｎｅｃｒａｃｋｉｎａｎｅｌａｓｔｉｃｐｌａｔｅｓｕｂｊｅｃｔｔｏｕｎｉｆｏｒｍｔｅｎｓｉｏｎ,ｓｈｅａｒａｎｄａｎｔｉ＿ｐｌａｎｅｓｈｅａｒ．Ｔｈｅｆｉｅｌｄｅｑｕａｔｉｏｎｓｅｍｐｌｏｙｅｄｉｎｔｈｅｓｏｌｕｔｉｏｎｏｆｔｈｅｓｅｐｒｏｂｌｅｍｓａｒｅｔｈｏｓｅｏｆｔｈｅｔｈｅｏｒｙｏｆｎｏｎ＿ｌｏｃａｌｅ…     

纳米压痕过程的三维有限元数值试验研究

采用有限元方法模拟了纳米压痕仪的加、卸载过程，三维有限元模型考虑了纳米压痕仪的标准Berkovich压头．介绍了有限元模型的几何参数、边界条件、材料特性与加载方式，讨论了摩擦、滑动机制、试件模型的大小对计算结果的影响，进行了计算结果与标准试样实验结果的比较，证实了模拟的可靠性．在此基础上，重点研究了压头尖端曲率半径对纳米压痕实验数据的影响．对比分析了尖端曲率半径r＝0与r＝100nm两种压头的材料压痕载荷—位移曲线．结果表明，当压头尖端曲率半径r≠0时，基于经典的均匀连续介质力学本构理论、传统的实验手段与数据处理方法，压痕硬度值会随着压痕深度的减小而升高．     

Wedge indentation into elastic-plastic single crystals. 2: Simulations for face-centered cubic crystals

The asymptotic stress and deformation fields associated with the contact point singularity of a nearly-flat wedge indenter impinging on a specially-oriented single face-centered cubic crystal are derived analytically in a companion paper. In order to investigate the extent of the asymptotic fields, the indentation process is simulated numerically using single crystal plasticity. The quasistatically translating asymptotic fields consist of four angular elastic sectors separated by plastically deforming sector boundaries, as predicted in the companion paper. The asymptotic stress distributions are in accord with the analytical predictions. In addition, simulations are performed for a wedge indenter with a 90° included angle in order to investigate the consequences of finite deformation and finite lattice rotation. Several salient features of the deformation field for the nearly-flat indenter persist in the deformation field for the 90° wedge indenter. The existence of the salient features is validated by comparison to experimental measurements of the lower bound on geometrically necessary dislocation (GND) densities.     

Calculation of the flow of an ideal fluid past a wing of finite thickness

The problem of irrotational flow past a wing of finite thickness and finite span can be reduced by Green's formula to the solution of a system of Fredholm equations of the second kind on the surface of the wing [1]. The wake vortex sheet is represented by a free vortex surface. Besides panel methods (see, for example, [2]) there are also methods of approximate solution of this problem based on a preliminary discretization of the solution along the span of the wing in which the two-dimensional integral equations are reduced to a system of one-dimensional integral equations [1], for which numerical methods of solution have already been developed [3–6]. At the same time, a discretization is also realized for the wake vortex sheet along the span of the wing. In the present paper, this idea of numerical solution of the problem of irrotational flow past a wing of finite span is realized on the basis of an approximation of the unknown functions which is piecewise linear along the span. The wake vortex sheet is represented by vortex filaments [7] in the nonlinear problem. In the linear problem, the sheet is represented both by vortex filaments and by a vortex surface. Examples are given of an aerodynamic calculation for sweptback wings of finite thickness with a constriction, and the results of the calculation are also compared with experimental results.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 124–131, October–December, 1981.     

考虑压头尖端曲率的弹塑性材料硬度的解答形式

结合近来发表的对金属材料采用球形压头的微压痕实验结果及Johnson对应原理，讨论了在传统弹塑性理论下锥形压头在计及压头顶端曲率半径影响时硬度的解答形式．进而得出结论：压头尖端曲率半径不是引起尺度效应的根源，相反，它会使尺度效应减弱．     

Wedge indentation into elastic-plastic single crystals, 1: Asymptotic fields for nearly-flat wedge

Asymptotic stress and deformation fields under the contact point singularities of a nearly-flat wedge indenter and of a flat punch are derived for elastic ideally-plastic single crystals with three effective in-plane slip systems that admit a plane strain deformation state. Face-centered cubic (FCC), body-centered cubic (BCC), and hexagonal-close packed (HCP) crystals are considered. The asymptotic fields for the flat punch are analogous to those at the tip of a stationary crack, so a potential solution is that the deformation field consists entirely of angular constant stress plastic sectors separated by rays of plastic deformation across which stresses change discontinuously. The asymptotic fields for a nearly-flat wedge indenter are analogous to those of a quasistatically growing crack tip fields in that stress discontinuities can not exist across sector boundaries. Hence, the asymptotic fields under the contact point singularities of a nearly-flat wedge indenter are significantly different than those under a flat punch. A family of solutions is derived that consists entirely of elastically deforming angular sectors separated by rays of plastic deformation across which the stress state is continuous. Such a solution can be found for FCC and BCC crystals, but it is shown that the asymptotic fields for HCP crystals must include at least one angular constant stress plastic sector. The structure of such fields is important because they play a significant role in the establishment of the overall fields under a wedge indenter in a single crystal. Numerical simulations—discussed in detail in a companion paper—of the stress and deformation fields under the contact point singularity of a wedge indenter for a FCC crystal possess the salient features of the analytical solution.     

考虑压头曲率半径的J2形变理论压痕有限元分析

采用经典J2形变理论,在考虑压头曲率半径的前提下,针对几组微压痕实验进行了有限元数值模拟,给出理论计算结果并与实验进行了系统比较．结果发现考虑了压头曲率半径后的经典J2形变理论得到的整段计算曲线不能和实验曲线吻合,可以推理出即使考虑压头曲率半径的的影响,经典J2形变理论也不能很好地解释实验现象．     

On anti-plane shear behavior of a Griffith permeable crack in piezoelectric materials by use of the non-local theory

In this paper, the non-local theory of elasticity is applied to obtain the behavior of a Griffith crack in the piezoelectric materials under anti-plane shear loading for permeable crack surface conditions. By means of the Fourier transform the problem can be solved with the help of a pair of dual integral equations with the unknown variable being the jump of the displacement across the crack surfaces. These equations are solved by the Schmidt method. Numerical examples are provided. Unlike the classical elasticity solutions, it is found that no stress and electric displacement singularity is present at the crack tip. The non-local elastic solutions yield a finite hoop stress at the crack tip, thus allowing for a fracture criterion based on the maximum stress hypothesis. The finite hoop stress at the crack tip depends on the crack length and the lattice parameter of the materials, respectively. The project supported by the National Natural Science Foundation of China (50232030 and 10172030)     

Investigation of the dynamic behavior of two parallel symmetric cracks in piezoelectric materials use of non-local theory

In this paper, the dynamic behavior of two parallel symmetric cracks in piezoelectric materials under harmonic anti-plane shear waves is investigated by use of the non-local theory for permeable crack surface conditions. To overcome the mathematical difficulties, a one-dimensional non-local kernel is used instead of a two-dimensional one for the problem to obtain the stress occurs near the crack tips. By means of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations that the unknown variables are the jumps of the displacement along the crack surfaces. These equations are solved using the Schmidt method. Numerical examples are provided. Contrary to the previous results, it is found that no stress and electric displacement singularity is present near the crack tip. The non-local elastic solutions yield a finite hoop stress near the crack tip, thus allowing for a fracture criterion based on the maximum stress hypothesis. The finite hoop stress at the crack tip depends on the crack length, the frequency of the incident wave, the distance between two cracks and the lattice parameter of the materials, respectively. Contrary to the impermeable crack surface condition solution, it is found that the dynamic electric displacement for the permeable crack surface conditions is much smaller than the results for the impermeable crack surface conditions. The results show that the dynamic field will impede or enhance crack propagation in the piezoelectric materials at different stages of the dynamic load.     

ANALYSIS ON PSEUDO-STEADY INDENTATION CREEP

Theoretical analysis and finite element （FE） simulation have been carried out for a constant specific load rate （CSLR） indentation creep test. Analytical results indicate that both the representative stress and the indentation strain rate become constant after a transient period. Moreover, the FE simulation reveals that both the contours of equivalent stress and equivalent plastic strain rate underneath the indenter evolve with geometrical self-similarity. This suggests that pseudo-steady indentation creep occurs in the region beneath the indenter. The representative points in the region are defined as the ones with the equivalent stress equal to the representative stress. In addition, it is revealed that the proportionality between indentation strain rate and equivalent plastic strain rate holds at the representative points during the pseudo-steady indentation creep of a power law material. A control volume （CV） beneath the indenter, which governs the indenter velocity, is identified. The size of the CV at the indented surface is approximately 2.5 times the size of the impression. The stress exponent for creep can be obtained from the pseudosteady indentation creep data. These results demonstrate that the CSLR testing technique can be used to evaluate creep parameters with the same accuracy as conventional uniaxial creep tests.