Optical and electronic properties of (GaAs)n / (InAs)n(001) superlattices: LMTO-ASA approach

The optical and electronic properties of (GaAs)_n/(InAs)_n superlattices are calculated by means of LMTO-ASA method. The too small band gap problem of bulk material and superlattices is corrected by adding to the effective potentials an additional external potential that is sharply peaked at the atomic sites. The results show that the optical properties of GaAs/InAs(001) superlattices are about average of that of two bulks of GaAs and InAs.     

Sn1−xBixO2 and Sn1−xTaxO2 (0≤x≤0.75): A first-principles study

The structural, elastic, electronic and optical (x=0) properties of doped Sn_1−xBi_xO₂ and Sn_1−xTa_xO₂ (0≤x≤0.75) are studied using the first-principles pseudopotential plane-wave method within the local density approximation. The independent elastic constants C_ij and other elastic parameters of these compounds have been calculated for the first time. The mechanical stability of the compounds with different doping concentrations has also been studied. The electronic band structure and density of states are calculated and the effect of doping on these properties is also analyzed. It is seen that the band gap of the undoped compound narrowed with dopant concentration, which disappeared for x=0.26 for Bi doping and 0.36 for Ta doping. The materials thus become conductive oxides through the change in the electronic properties of the compound for x≤0.75, which may be useful for potential application. The calculated optical properties, e.g. dielectric function, refractive index, absorption spectrum, loss-function, reflectivity and conductivity of the undoped SnO₂ in two polarization directions are compared with both previous calculations and measurements.     

First-principles study on the electronic and optical properties of SnxGe1 − x

The electronic and optical properties of the direct band gap alloys Sn_xGe_1 − x (x = 0.000, 0.042, 0.083, 0.125, 0.167, and 0.208) have been studied by using the generalized gradient approximation in the framework of the density functional theory. The calculated lattice constants obey Vergard's law. The band structures show that the alloys have direct band gap and the band gaps can be tunable by Sn contents. The optical properties of the Sn_xGe_1 − x alloys with the physical quantities such as the complex dielectric function, the energy-loss function and the static dielectric constant, respectively, are shown to support the potential application of infrared devices in the future.     

DFT study of structural, electronic and vibrational properties of pure (Al2O3)n (n = 9, 10, 12, 15) and Ni-doped (Al2O3)n (n = 9, 10) clusters

The geometrical, electronic and vibrational properties of pure (Al₂O₃)_n (n = 9, 10, 12, 15) clusters and Ni-doped (Al₂O₃)_9-10 clusters are investigated by density functional theory. There are four different Ni-doped (Al₂O₃)₉ clusters and one Ni-doped (Al₂O₃)₁₀ cluster taken into account. Compared with the pure clusters, the Ni-doped (Al₂O₃)_9-10 clusters have narrower HOMO-LUMO energy gaps. The results indicate that the impurity of Ni atom is mainly responsible for the reduction of the HOMO-LUMO energy gap. One characteristic vibration band at about 1030 cm⁻¹ is found in the vibrational frequencies of the Ni-doped (Al₂O₃)_9-10 clusters, which is caused by the asymmetric Al-O-Al stretching vibration. Another band at around 826 cm⁻¹ involving the characteristic vibration of Ni-O bond is in good agreement with experimental results.     

AlN, GaN, AlxGa1 − xN nanotubes and GaN/AlxGa1 − xN nanotube heterojunctions

Semiconductor optoelectronic devices based on GaN and on InGaN or AlGaN alloys and superlattices can operate in a wide range of wavelengths, from far infrared to near ultraviolet region. The efficiency of these devices could be enhanced by shrinking the size and increasing the density of the semiconductor components. Nanostructured materials are natural candidates to fulfill these requirements. Here we use the density functional theory to study the electronic and structural properties of (10,0) GaN, AlN, Al_xGa_1 − xN nanotubes and GaN/Al_xGa_1 − xN heterojunctions, 0<x<1. The Al_xGa_1 − xN nanotubes exhibit direct band gaps for the whole range of Al compositions, with band gaps varying from 3.45 to 4.85 eV, and a negative band gap bowing coefficient of −0.14 eV. The GaN/Al_xGa_1 − xN nanotube heterojunctions show a type-I band alignment, with the valence band offsets showing a non-linear dependence with the Al content in the nanotube alloy. The results show the possibility of engineering the band gaps and band offsets of these III-nitrides nanotubes by alloying on the cation sites.     

Ab initio calculation of optical absorption and reflectivity of Si(0 0 1)/SiO2 superlattices with varying interfaces

Using first-principles calculations we investigate the influence of interface modification and layer thicknesses on the optical properties of Si/SiO₂ superlattices. Four interface models with different dangling-bond passivation are considered. The results demonstrate confinement effects not only for the fundamental band gaps but also for the optical properties. While for a large Si layer thickness of the Si/SiO₂ superlattices the interface dependence is small, the calculations show a significant structure dependence for thin Si layers. © 2007 Elsevier Science. All rights reserved.     

The structural, electronic and optical properties of CdxZn1 − xSe ternary alloys

The structural, electronic, and optical properties of Cd_xZn_1 − xSe alloys are investigated using the first-principles plane-wave pseudopotential method within the LDA approximations. In particular, the lattice constant, bulk modulus, electronic band structures, density of state, and optical properties such as dielectric functions, refractive index, extinction coefficient and energy loss function are calculated and discussed. Our results agree well with the available data in the literature.     

Structural, optical properties and band gap alignments of ZrOxNy thin films on Si (1 0 0) by radio frequency sputtering at different deposition temperatures

ZrO_xN_y thin films have been prepared by radio frequency magnetron sputtering at various substrate temperatures. The effect of substrate temperature on structural, optical properties and energy-band alignments of as-deposited ZrO_xN_y thin films are investigated. Atomic force microscopy results indicate the decreased root-mean-square (rms) values with substrate temperature. Fourier transform infrared spectroscopy spectra indicate that an interfacial layer has been formed between Si substrate and ZrO_xN_y thin films during deposition. X-ray photoelectron spectroscopy and spectroscopy ellipsometry (SE) results indicate the increased nitrogen incorporation in ZrO_xN_y thin films and therefore, the decreased optical band gap (E_g) values as a result of the increased valence-band maximum and lowered conduction-band minimum.     

应变超晶格(ZnS)1/(ZnSe)1的光学性质

用linear mufin tin orbital能带方法，计算Si衬底上（ZnS）_n/（ZnSe）_n（001）超晶格的能带结构，计算中采用外加调整势进行带隙修正．在得到较准确的能带结构和波函数的基础上，计算该超晶格系统的光学介电函数虚部ε₂（ω）．结果表明，该超晶格系统的光学性质结合了ZnS和ZnSe体材料光学性质的特点，在相当宽的能量范围内有较好的光谱响应．并且该超晶格系统是直接带隙材料，在光电器件应用中有很大潜力． 关键词：     

Spectroscopic studies of (AsSe)100−xAgx thin films

Thin (AsSe)_100−xAg_x films have been grown onto quartz substrates by vacuum thermal evaporation or pulsed laser deposition from the corresponding bulk materials. The amorphous character of the coatings was confirmed by X-ray diffraction investigations. Their transmission was measured within the wavelength range 400-2500 nm and the obtained spectra were analyzed by the Swanepoel method to derive the optical band gap E_g and the refractive index n. We found that both parameters are strongly influenced by the addition of silver to the glassy matrix: E_g decreases while n increases with Ag content. These variations are discussed in terms of the changes in the atomic and electronic structure of the materials as a result of silver incorporation.     

Effect of sulfur substitutions on optical, electrical and structural properties of Ge(SxSe1−x)2 system

Glasses in the system Ge-Se-S were prepared with different Se/S ratios in order to investigate the compositional dependence of selected physical properties. We report the results of a systematic study examining the UV-vis transmission, dc electrical conductivity and X-ray diffraction of the system Ge(S_xSe_1−x)₂ with x=0, 0.1, 0.4 and 1.0 where replacement of S by Se was made. The changes in the optical energy gap, E_g, (from 1.95 to 2.43 eV) and band tail width, E_e, (from 103 to 243 meV) behave contrarily to the change in refractive index, n, (from 2.3 to 2) with the progressive replacement of S by Se. This behavior was discussed and interpreted with the changes in cohesive energy. The analysis of defects in the prepared films was carried out by the examination of activation energies obtained from dc electrical conductivity. The analysis of the X-ray diffraction pattern revealed a remarkable reduction in the intensity of the first and second diffraction peaks with the progressive replacement of S content, which confirms a change in the intermediate range order structure: reorganization of the structural properties.     

FP-LMTO study of structural,electronic and optical properties of wurtzite (CdS)n/(CdSe)n superlattices

In this paper, we have conducted a first-principles study of the structural, electronic and optical properties of (CdS)_n/(CdSe)_n superlattices (where n is numbers of monolayers) in the wurtzite phase (B4), using the Full-Potential Linear Muffin-Tin Orbital (FP-LMTO) method within the Local Density Approximation (LDA) technique, in order to describe the exchange correlation energy. The calculated electronic properties indicate that all (CdS)_n/(CdSe)_n superlattices configurations, possess a semiconductor behavior with same energy gaps. We have seen more carefully and accurately that the different superlattices configurations have no effect on the electronic properties; in particular, we did not observe any dependence between the band gap behavior and the used layers.     

Optoelectronic properties of LixAxNbO3 (A=Na, K, Rb, Cs, Fr) crystals

The structural and optoelectronic properties of Li_xA_xNbO₃ (A=Na, K, Rb, Cs, Fr and x=0, 0.5) compounds have been investigated by the generalized gradient approximation within density functional theory. The calculated fundamental direct band gap of pure LiNbO₃ is 3.32 eV. It is found that the substitution of alkali elements drastically change the optoelectronic nature of the compound from direct to indirect bandgap semiconductor and the fundamental gap also decreases. The nature of the compound is ionic with strong bonds between alkali ions and O, while there are partial covalent bonds between Nb and O. The calculated static refractive index of pure LiNbO₃ is 2.43 for the perpendicular plane to the c-axis, while 2.37 for the parallel plane to the c-axis. So these values are intensively dependent on the substitution of alkali metals. The calculated electron energy loss spectra are in good agreement with the experimental results. It also predicts some extra interesting peaks, which have not been observed in experiments.     

Periodicity and orientation dependence of electrical properties of [(Pb0.90La0.10)Ti0.975O3/PbTiO3]n (n = 1-6) multilayer thin films

The [(Pb_0.90La_0.10)Ti_0.975O₃/PbTiO₃]_n (PLT/PT)_n (n = 1-6) multilayer thin films were deposited on the PbO_x(1 0 0)/Pt/Ti/SiO₂/Si substrates by RF magnetron sputtering method. The layer thickness of PbTiO₃ in one periodicity kept unchanged, and the layer thickness of (Pb_0.90La_0.10)Ti_0.975O₃ is varied. The electrical properties of the (PLT/PT)_n multilayer thin films were investigated as a function of the periodicity (n) and the orientation. The studied results show that the PbO_x buffer layer results in the (PLT/PT)_n films’ (1 0 0) orientation, and the (1 0 0)-oriented (PLT/PT)_n multilayer thin films with n = 2 exhibit better pyroelectric properties and ferroelectric behavior than those of (PLT/PT)_n films with other periodicities and orientations. The underlying physical mechanism for the enhanced electrical properties of (PLT/PT)_n multilayer thin films was carefully discussed in terms of the periodicities and orientations.     

The study of optical parameters and DC conductivity of Se100−xHgx thin films

Se_100−xHg_x bulk samples have been prepared by conventional melt quenching technique. The thin films of the material have been prepared on glass substrate using the thermal evaporation technique. The transmission spectra has been studied to measure the optical constants like absorption coefficient (α), extinction coefficient (K), optical band gap (E_g), Urbach energy (E_e). The DC conductivity (σ_dc) of Se_100−xHg_x has been also studied to find the activation energy (ΔE_a)$(\mathrm{\Delta }{E}_a)$. The optical band gap increases and Urbach energy first increases then decreases with increase in Hg concentration. DC conductivity and activation energy increases with increase in Hg concentration. These materials are found suitable for the optical disk materials and in optoelectronic devices due to their high absorption coefficient and dependence of reflectance on composition.     

Optical and electrical properties of nonstoichiometric a-Ge1−xCx films prepared by magnetron co-sputtering

Amorphous non-hydrogenated germanium carbide (a-Ge_1−xC_x) films have been prepared by magnetron co-sputtering method in a discharge of Ar. The dependence of structural and chemical bonding properties on the Ge/C ratio (R) has been investigated by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and Raman spectroscopy. The relationship between the chemical bonding and the optical and electrical properties of the a-Ge_1−xC_x films has also been explored. It has been shown that the refractive index of the films increases from 2.9 to 4.4 and the optical gap decreases from 1.55 to 1.05 eV as R increases from 1.22 to 5.67. Moreover, the conductivity σ increases clearly and the activation energy E_a decreases with the increasing R owing to the reduction of sp³ CGe bonds. The a-Ge_1−xC_x films exhibit refractive index and optical gap values changing with x in a wide range, which may make a-Ge_1−xC_x films good candidates in the fields of protection coatings for IR windows and electronic devices.     

Third-order optical nonlinearities of lead-free (Na1−xKx)0.5Bi0.5TiO3 thin films

(Na_1−xK_x)_0.5Bi_0.5TiO₃ (NKBT) (x = 0.1, 0.2, and 0.3) thin films with good surface morphology and rhombohedral perovskite structure were fabricated on quartz substrates by a sol-gel process. The fundamental optical constants (the band gaps, linear refractive indices and absorption coefficients) of the films were obtained through optical transmittance measurements. The nonlinear optical properties were investigated by Z-scan technique performed at 532 nm with a picosecond laser. A two-photon absorption effect closely related with potassium-doping content was found in thin films, and the nonlinear refractive index n₂ increases evidently with potassium-doping. The real part of the third-order nonlinear susceptibility χ⁽³⁾ is much larger than its imaginary part, indicating that the third-order optical nonlinear response of the NKBT films is dominated by the optical nonlinear refractive behavior. These results show that NKBT thin films have potential applications in nonlinear optics.     

Half-metallic properties of the Co2Ti1−xFexGa Heusler alloys and Co2Ti0.5Fe0.5Ga (0 0 1) surface

Electronic and magnetic properties of the bulk Co₂Ti_1−xFe_xGa Heusler alloys and Co₂Ti_0.5Fe_0.5Ga (0 0 1) surfaces are studied within the framework of density functional theory using the augmented plane wave plus local orbital (APW+lo) approach. It will be shown that all alloys have the spin polarization of the ideal 100% value except the Co₂FeGa alloy with spin polarization about 98%. Co₂Ti_0.5Fe_0.5Ga is an example that is stable against the effects destroying the half-metallicity due to the position of the Fermi energy (E_F) in the middle of the minority band gap. The phase diagram obtained by ab-initio atomistic thermodynamics shows that in the higher limit of μ_Ga three surfaces of FeGa, TiGa and TiFeGa are accessible in the Co₂Ti_0.5Fe_0.5Ga alloy but on decreasing μ_Ga, the accessible region gradually moves towards FeGa termination. It is discussed that, at the ideal surfaces, half-metallicity of the alloy is lost, although the TiGa surface keeps high spin polarization (about 95%).     

Effects of UV photon irradiation on SiOx (0 < x < 2) structural properties

Thin films of a-SiO_x (0 < x < 2) were prepared by reactive r.f. magnetron sputtering from a polycrystalline-silicon target in an Ar/O₂ gas mixture. The oxygen partial pressure in the deposition chamber was varied so as to obtain films with different values of x. The plasma was monitored, during depositions, by optical emission spectroscopy (OES) system. Energy dispersive X-ray (EDX) measurements and infra-red (IR) spectroscopy were used to study the compositional and structural properties of the deposited layers.Structural modifications of SiO_x thin films have been induced by UV photons’ bombardment (wavelength of 248 nm) using a pulsed laser. IR spectroscopy and X-ray photoemission spectroscopy (XPS) were used to investigate the structural changes as a function of x value and incident energy. SiO_x phase separation by spinodal decomposition was revealed. The IR peak position shifted towards high wavenumber values when the laser energy is increased. Values corresponding to the SiO₂ material (only Si⁴⁺) have been found for laser irradiated samples, independently on the original x value. The phase separation process has a threshold energy that is in agreement with theoretical values calculated for the dissociation energy of the investigated material.For high values of the laser energy, crystalline silicon embedded in oxygen-rich silicon oxide was revealed by Raman spectroscopy.