First-principles studies of structural,mechanical, electronic,optical properties and pressure-induced phase transition of CuInO2 polymorph

Using the first-principles density-functional theory within the generalized gradient approximation (GGA), we have investigated the structural, elastic, mechanical, electronic, and optical properties and phase transition of CuInO₂. Structural parameters including lattice constants and internal parameter, pressure effects and phase transition pressure were calculated. We have obtained the elastic coefficients, bulk modulus, shear modulus, Young's modulus and Poisson's ratio. We find that two phases of CuInO₂ are indirect band gap semiconductors (F–Γ and H–Γ for 3R and 2H, respectively). Optical properties, including the dielectric function, refractive index, extinction coefficient, reflectivity, absorption coefficient, loss function and optical conductivity have been obtained for radiations of up to 30 eV.     

First-principles study of electronic structures and optical properties of Cu, Ag, and Au-doped anatase TiO2

We perform first-principles calculations to investigate the band structure, density of states, optical absorption, and the imaginary part of dielectric function of Cu, Ag, and Au-doped anatase TiO₂ in 72 atoms systems. The electronic structure results show that the Cu incorporation can lead to the enhancement of d states near the uppermost of valence band, while the Ag and Au doping cause some new electronic states in band gap of TiO₂. Meanwhile, it is found that the visible optical absorptions of Cu, Ag, and Au-doped TiO₂, are observed by analyzing the results of optical properties, which locate in the region of 400-1000 nm. The absorption band edges of Cu, Ag, and Au-doped TiO₂ shift to the long wavelength region compared with the pure TiO₂. Furthermore, according to the calculated results, we propose the optical transition mechanisms of Cu, Ag, and Au-doped TiO₂. Our results show that the visible light response of TiO₂ can be modulated by substitutional doping of Cu, Ag, and Au.     

First-principles study of electronic and optical properties of N-doped SrHfO3

The plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory (DFT) is used to investigate the doping effect of N substituting for O in cubic SrHfO₃. The calculated results show that the reaction from pure elements to final compounds is favorable and the final compounds are energetically stable. Electronic structure analysis shows the band gaps narrowing with the increase of N concentration due to the presence of the impurity state of N 2p on the top of the valence band and the acceptor energy levels above the Fermi energy, which may be responsible for the red-shift. Besides, the optical absorption edge has been gradually red shifted with increasing N concentration.     

Elasticity, electronic structure, chemical bonding and optical properties of monoclinic ZrO2 from first-principles

Structural parameters as well as elastic, electronic, bonding and optical properties of monoclinic ZrO₂ were investigated using the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory (DFT). The calculated structural properties and independent elastic constants of monoclinic ZrO₂ are in favorable agreement with previous work. We have derived the bulk and shear moduli, Young’s modulus and Poisson coefficients for monoclinic ZrO₂ and estimated the Debye temperature of monoclinic ZrO₂ from acoustic velocity. Electronic and bonding properties are studied from the calculation of band structure, densities of states and charge densities. Furthermore, in order to clarify the mechanism of optical transitions in monoclinic ZrO₂, the dielectric functions are calculated and analyzed by means of the electronic structure, which shows significant optical anisotropy in the components of polarization directions (1 0 0), (0 1 0) and (0 0 1).     

First-principles study of the structural, elastic, electronic and optical properties of the monoclinic BiScO3

The structural, elastic, electronic and optical properties of the monoclinic BiScO₃ are investigated in the framework of the density functional theory. The calculated structural parameters are in agreement with the experimental values. Moreover, the structural stability of BiScO₃ system has been confirmed by the calculated elastic constants. The band structure, density of states, charge transfers and bond populations are also given. The results indicate that BiScO₃ has a direct band gap of 3.36 eV between the occupied O 2p states and unoccupied Bi 6p states, and its bonding behavior is a combination of covalent and ionic nature. Finally, the absorption spectrum, refractive index, extinction coefficient, reflectivity, energy-loss function and dielectric function of the monoclinic BiScO₃ are calculated. In addition, the variation of the static dielectric constants ε₁(0) as a function of pressure for BiScO₃ is also discussed.     

Structural and electronic properties of cubic SrHfO3 surface: First-principles calculations

Structural, electronic and chemical bonding properties of the (0 0 1) surface of cubic SrHfO₃ have been investigated with both SrO and HfO₂ termination using the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory. The relaxed structures of two slabs have been analyzed, which shows the interplanar distance of two slabs has the same changed trend. The electronic band structures and density of states of two slabs have been discussed, showing the reduced band gaps by comparison with those of bulk system. The chemical bonding between Sr and O between the surface layer and subsurface layer as well as Hf and O has been increased. The surface energy, work function and stability have been calculated, which indicates SrO-terminated slab is more stable.     

First-principles study of the structural, elastic, electronic, optical, and vibrational properties of intermetallic Pd2Ga

The structural, elastic, electronic, optical, and vibrational properties of the orthorhombic Pd₂Ga compound are investigated using the norm-conserving pseudopotentials within the local density approximation in the frame of density functional theory. The calculated lattice parameters have been compared with the experimental values and found to be in good agreement with these results. The second-order elastic constants and the other relevant quantities, such as the Young's modulus, shear modulus, Poisson's ratio, anisotropy factor, sound velocity, and Debye temperature, have been calculated. It is shown that this compound is mechanically stable after analysing the calculated elastic constants. Furthermore, the real and imaginary parts of the dielectric function and the optical constants, such as the optical dielectric constant and the effective number of electrons per unit cell, are calculated and presented. The phonon dispersion curves are derived using the direct method. The present results demonstrate that this compound is dynamically stable.     

Effect of WO3 on structural and optical properties of CeO2-PbO-B2O3 glasses

Pure and WO₃ doped CeO₂-PbO-B₂O₃ glasses are prepared by the melt-quench technique. The structural and optical analyses of glasses are carried out by XRD, FTIR, density and UV-vis spectroscopic measurement techniques. FTIR analysis indicates the transformation of structural units of BO₃ into BO₄ with W-O-W vibration and the presence of WO₄ and WO₆ units observed with increase in WO₃ contents. Decrease in band gap for CeO₂-PbO-B₂O₃ glasses from 2.89 to 2.30 eV and for WO₃ doped glasses from 2.89 to 1.95 eV has been observed and discussed. This decrease in band gap with WO₃ doping approaches to semiconductor behavior. It shows that the presence of WO₃ in the glass samples causes more compaction of the borate network due to the formation of BO₄ groups and the presence of WO₄ and WO₆ groups, which result in a decrease in the optical band gap energy and increase in the density.     

Effect of Nd concentration on structural and optical properties of Nd:Y2O3 transparent ceramic

Y₂O₃ transparent ceramics with different Nd concentration (0.1-7.0at%) were fabricated using ZrO₂ as additive. All the samples exhibit high transparency over a broad spectral region. The elements (Y, O and Nd) are uniformly distributed in the ceramic body, and the average grain size increases with Nd content. Based on the absorption spectrum, the Judd-Ofelt intensity parameters are calculated (Ω₂=4.364×10⁻²⁰ cm², Ω₄=3.609×10⁻²⁰ cm² and Ω₆=2.919×10⁻²⁰ cm²). The absorption coefficients increase linearly with Nd³⁺ doping concentration. The absorption cross-section at 804 nm and stimulated emission cross-section at 1078 nm are calculated to be 1.54×10⁻²⁰ and 7.24×10⁻²⁰ cm², respectively. All the emission bands exhibit the highest emission intensities with 1.0at% Nd³⁺ ion content, while the lifetime decreases dramatically from 321.5 μs (0.1at% Nd) to 17.9 μs (7.0at% Nd). According to the emission spectra and measured lifetime, the optimum doping concentration of Nd³⁺ ion in Y₂O₃ transparent ceramic might be around 1.0at%.     

The electronic and optical properties of Cu doped CdI2

Based on the density functional pseudopotential method, the electronic structures and the optical properties of CdI₂ doped with Cu are investigated in detail. The calculation results indicate that the defect of Cu(Cd) exists steadily with a certain solubility. For the Cu doped CdI₂, the new highly localized impurity bands induced by Cu 3d states lie just across the Fermi energy at the top of the valence band. The doping of Cu induces reduction of band gap of CdI₂; red shifts are revealed in both the imaginary part of dielectric function and the absorption spectra corresponding to the change in band gaps. Moreover, the study of the reflection spectrum and the loss function shows that the doped Cu is responsible for the increased reflection peak intensity and the red shift of the plasma resonant frequency of CdI₂.     

Structural, electronic, elastic and optical properties of fluoro-perovskite KZnF3

We determine the structural, electronic, elastic and optical properties of fluoro-perovskite KZnF₃ using the full potential linear augmented plane wave approach (FP-LAPW) based on the density functional theory (DFT). The exchange-correlation potential is treated by the local density approximation (LDA) and the generalized gradient approximation (GGA). The calculated structural parameters are in good agreement with the available data. We have obtained an indirect band gap. The effect of the pressure on the band gaps is investigated. We evaluate the elastic constants (C_ij), elastic moduli and the Debye temperature. The imaginary and the real parts of the dielectric function ε(ω) and some optical constants are also calculated.     

N掺杂锐钛矿TiO2光学性能的第一性原理研究

用平面波赝势方法(PWP)计算了N掺杂锐钛矿型TiO₂前后的光学特性,即介电函数虚部ε₂(ω)，光学吸收系数I(ω)和反射率R(ω). 并从能带结构上解释了为什么掺N后锐钛矿型TiO₂的光学谱在2.93，3.56和3.97eV处相对掺杂前会出现3个峰值的原因. 从光谱图上分析得出，掺杂后TiO₂要发生红移现象，实验现象证实了这一结果. 关键词： N掺杂 2')" href="#">锐钛矿型TiO₂ 光学性能 第一性原理     

Structural and optical properties of Er, Yb co-doped Y2O3 thin films

Thin Er³⁺, Yb³⁺ co-doped Y₂O₃ films were grown on (1 0 0) YAG substrates by pulsed laser deposition. Ceramic targets having different active ion concentration were used for ablation. The influence of the rare-earth content and oxygen pressure applied during the deposition on the structural, morphological and optical properties of the films were investigated. The films deposited at the lower pressure, 1 Pa, and at 1/10 Er to Yb doping ratio are highly textured along the (1 1 1) direction of the Y₂O₃ cubic phase. In addition to the crystalline structure, these films possess smoother surface compared to those prepared at the higher pressure, 10 Pa. All other films are polycrystalline, consisting of cubic and monoclinic phases of Y₂O₃. The rougher surface of the films produced at the higher-pressure leads to higher scattering losses and different behavior of the reflectivity spectra. Optical anisotropy in the films of less than 0.004 was measured regardless of the monoclinic structure obtained. Waveguide losses of about 1 dB/cm at 633 nm were obtained for the films produced at the lower oxygen pressure.     

First-principles study of structural,elastic, electronic and thermodynamic properties of topological insulator Bi2Se3 under pressure

The structural, elastic, electronic and thermodynamic properties of the rhombohedral topological insulator Bi₂Se₃ are investigated by the generalized gradient approximation (GGA) with the Wu–Cohen (WC) exchange-correlation functional. The calculated lattice constants agree well with the available experimental and other theoretical data. Our GGA calculations indicate that Bi₂Se₃ is a 3D topological insulator with a band gap of 0.287 eV, which are well consistent with the experimental value of 0.3 eV. The pressure dependence of the elastic constants C_ij, bulk modulus B, shear modulus G, Young’s modulus E, and Poisson’s ratio σ of Bi₂Se₃ are also obtained successfully. The bulk modulus obtained from elastic constants is 53.5 GPa, which agrees well with the experimental value of 53 GPa. We also investigate the shear sound velocity V_S, longitudinal sound velocity V_L, and Debye temperature Θ_E from our elastic constants, as well as the thermodynamic properties from quasi-harmonic Debye model. We obtain that the heat capacity C_v and the thermal expansion coefficient α at 0 GPa and 300 K are 120.78 J mol^?1 K^?1 and 4.70 × 10^?5 K^?1, respectively.     

The geometric structure and electronic properties of Fe3O3 clusters

On the basis of density-functional theory (PW91) and an all-electron numerical basis set, 60 optimized structures of Fe₃O₃⁺ clusters were obtained through optimization calculation and frequency analysis of 216 initial structures. 28 different isomers were ultimately confirmed after analyzing and re-calculating. The binding energies, the energy gaps between the highest occupied molecular orbital and lowest unoccupied molecular orbital, and the total magnetic moments of all stable isomers are reported. Some discussion of the relationship between electronic properties and structures is also presented.     

Elastic, electronic, and optical properties of hypothetical SnNNi3 and CuNNi3 in comparison with superconducting ZnNNi3

The elastic, electronic, and optical properties of MNNi₃ (M=Zn, Sn, and Cu) have been calculated using the plane-wave ultrasoft pseudopotential technique, which is based on the first-principle density functional theory (DFT) with generalized gradient approximation (GGA). The optimized lattice parameters, independent elastic constants (C₁₁, C₁₂, and C₄₄), bulk modulus B, compressibility K, shear modulus G, and Poisson's ratio υ, as well as the band structures, total and atom projected densities of states and finally the optical properties of MNNi₃ have been evaluated and discussed. The electronic band structures of the two hypothetical compounds show metallic behavior just like the superconducting ZnNNi₃. Using band structures, the origin of features that appear in different optical properties of all the three compounds has been discussed. The large reflectivity of the predicted compounds in the low energy region might be useful in good candidate materials for coating to avoid solar heating.     

YFeO3的电子结构和光学性质的第一性原理研究

稀土正铁氧体YFeO₃呈正交钙钛矿结构,其晶体和纳米晶材料在电极材料、 传感器和光催化领域具有重要的应用价值.用平面波赝势方法,采用广义梯度近似、改进的Perdew-Burke-Emzerhof交换-关联势、 实空间超软赝势计算方案,研究了YFeO₃晶体的几何结构、电子结构和光学性质. 计算得到的晶格参量与报道的实验结果一致.通过对能带结构、态密度、介电函数、吸收系数和光电导率的计算和分析, 确定YFeO₃是直接能隙半导体,能隙E_g约为2.22 eV,阐明了YFeO₃晶体和纳米晶具有较好的可见光催化性能.     

First-principles calculations of structural, electronic, optical and elastic properties of magnesite MgCO3 and calcite CaCO3

Detailed ab initio calculations of the structural, electronic, optical and elastic properties of two crystals - magnesite (MgCO₃) and calcite (CaCO₃) - are reported in the present paper. Both compounds are important natural minerals, playing an important role in the carbon dioxide cycling. The optimized crystal structures, band gaps, density of states diagrams, elastic constants, optical absorption spectra and refractive indexes dependence on the wavelength all have been calculated and compared, when available, with literature data. Both crystals are indirect band compounds, with calculated band gaps of 5.08 eV for MgCO₃ and 5.023 eV for CaCO₃. Both values are underestimated by approximately 1.0 eV with respect to the experimental data. Although both crystals have the same structure, substitution of Mg by Ca ions leads to certain differences, which manifest themselves in noticeable change in the electronic bands profiles and widths, shape of the calculated absorption spectra, and values of the elastic constants. Response of both crystals to the applied hydrostatic pressure was analyzed in the pressure range of phase stability, variations of the lattice parameters and characteristic interionic distances were considered. The obtained dependencies of lattice constants and calculated band gap on pressure can be used for prediction of properties of these two hosts at elevated pressures that occur in the Earth's mantle.     

Structural, elastic, electronic and optical properties of a new layered-ternary Ta4SiC3 compound

We propose a new layered-ternary Ta₄SiC₃ with two different stacking sequences (α- and β-phases) of the metal atoms along c axis and study their structural stability. The mechanical, electronic and optical properties are then calculated and compared with those of other compounds M₄AX₃ (M=V, Nb, Ta; A=Al, Si and X=C). The predicted compound in the α-phase is found to possess higher bulk modulus than these compounds. The independent elastic constants of the two phases are also evaluated and the results discussed. The electronic band structures for α- and β-Ta₄SiC₃ show metallic conductivity. Ta 5d electrons are mainly contributing to the total density of states (DOS). We see that the hybridization peak of Ta 5d and C 2p lies lower in energy and the Ta 5d-C 2p bond is stronger than Ta 5d-Si 3p bond. Further an analysis of the different optical properties shows the compound to possess improved behavior compared to similar types of compounds.     

Concentration-dependent electronic structure and optical absorption properties of B-doped anatase TiO2

The concentration-dependent electronic structures and optical properties of B-doped anatase TiO₂ have been calculated using the density functional theory. The calculated results indicate that the electronic structures of B-doped TiO₂ have changed compared with those of pure TiO₂, which is mainly due to the new midgap states induced by B doping. As to the optical properties, we calculate the imaginary part of dielectric function ε₂(ω) and optical absorption spectra of pure and B-doped TiO₂. Two transitions E₁ and E₂ emerged after B doping. The intensity of absorption is enhanced by B doping both in the UV and visible regions. According to the results of imaginary part of dielectric function ε₂(ω) and DOS, it can be concluded that the two optical transitions correspond to the transitions from the O 2p states in the top of valence band to the midgap states and from the midgap states to the Ti 3d states in the bottom of conduction band, respectively. These results have important implications for the further development of photocatalytic materials.