Concentration-dependent electronic structure and optical absorption properties of B-doped anatase TiO2

The concentration-dependent electronic structures and optical properties of B-doped anatase TiO₂ have been calculated using the density functional theory. The calculated results indicate that the electronic structures of B-doped TiO₂ have changed compared with those of pure TiO₂, which is mainly due to the new midgap states induced by B doping. As to the optical properties, we calculate the imaginary part of dielectric function ε₂(ω) and optical absorption spectra of pure and B-doped TiO₂. Two transitions E₁ and E₂ emerged after B doping. The intensity of absorption is enhanced by B doping both in the UV and visible regions. According to the results of imaginary part of dielectric function ε₂(ω) and DOS, it can be concluded that the two optical transitions correspond to the transitions from the O 2p states in the top of valence band to the midgap states and from the midgap states to the Ti 3d states in the bottom of conduction band, respectively. These results have important implications for the further development of photocatalytic materials.     

First-principles study of electronic structures and optical properties of Cu, Ag, and Au-doped anatase TiO2

We perform first-principles calculations to investigate the band structure, density of states, optical absorption, and the imaginary part of dielectric function of Cu, Ag, and Au-doped anatase TiO₂ in 72 atoms systems. The electronic structure results show that the Cu incorporation can lead to the enhancement of d states near the uppermost of valence band, while the Ag and Au doping cause some new electronic states in band gap of TiO₂. Meanwhile, it is found that the visible optical absorptions of Cu, Ag, and Au-doped TiO₂, are observed by analyzing the results of optical properties, which locate in the region of 400-1000 nm. The absorption band edges of Cu, Ag, and Au-doped TiO₂ shift to the long wavelength region compared with the pure TiO₂. Furthermore, according to the calculated results, we propose the optical transition mechanisms of Cu, Ag, and Au-doped TiO₂. Our results show that the visible light response of TiO₂ can be modulated by substitutional doping of Cu, Ag, and Au.     

Electronic structures and optical properties of rutile TiO2 with different point defects from DFT + U calculations

The electronic states and formation energies of four types of lattice point defects in rutile TiO₂ are studied using the first-principles calculations. The existence of oxygen vacancy leads to a deep donor defect level in the forbidden band, while the Ti interstitial forms two local states. It is predicted that oxygen vacancy prefers to combine with Ti-interstitial to form V_O–Ti_i dimer by a partial 3d electron transfer from the Ti_i to its neighboring V_O. The charge distribution between a Ti interstitial and its neighboring Ti ions partially shields the Coulomb interactions. Lastly, optical properties of these defective lattices are discussed.     

Optical properties of N and transition metal R (R=V,Cr, Mn,Fe, Co,Ni, Cu,and Zn) codoped anatase TiO2

The electronic structures, deformation charge density, dipole moment and optical properties of N and transition metal R (R=V, Cr, Mn, Fe, Co, Ni, Cu and Zn) codoped anatase TiO₂ are studied using the plane-wave ultrasoft pseudopotential method of density functional theory (DFT). The results exhibit that the absorption coefficients of the N+Cr-doped TiO₂ are in accordance with the experimental values in the visible-light region. The calculated results reveal that the N+R-doped TiO₂ is helpful for enhancing the absorption coefficient in the visible-light region; especially, among the eight materials, N+Mn-doped TiO₂ has the largest value of absorption coefficient in the visible-light region. The ionic bonding and Jahn–Teller distortion would contribute to increase the photocatalytic activity of TiO₂ in the visible-light region. All in all, for doped TiO₂, the large dipole moment of TiO₆ octahedron can enhance the optical responses in the visible-light region; in this work, however, it is found that the small dipole moment of TiO₆ octahedron would increase the absorption coefficient in the visible-light region.     

Electronic and optical properties of pure and Mo doped anatase TiO2 using GGA and GGA+U calculations

Comparative GGA and GGA+U calculations for pure and Mo doped anatase TiO₂ are performed based on first principle theory, whose results show that GGA+U calculation provide more reliable results as compared to the experimental findings. The direct band gap nature of the anatase TiO₂ is confirmed, both by using GGA and GGA+U calculations. Mo doping in anatase TiO₂ narrows the band gap of TiO₂ by introducing Mo 4d states below the conduction band minimum. Significant reduction of the band gap of anatase TiO₂ is found with increasing Mo doping concentration due to the introduction of widely distributed Mo 4d states below the conduction band minimum. The increase in the width of the conduction band with increasing doping concentration shows enhancement in the conductivity which may be helpful in increasing electron–hole pairs separation and consequently decreases the carrier recombination. The Mo doped anatase TiO₂ exhibits the n-type characteristic due to the shifting of Fermi level from the top of the valence band to the bottom of the conduction band. Furthermore, a shift in the absorption edge towards visible light region is apparent from the absorption spectrum which will enhance its photocatalytic activity. All the doped models have depicted visible light absorption and the absorption peaks shift towards higher energies in the visible region with increasing doping concentration. Our results describe the way to tailor the band gap of anatase TiO₂ by changing Mo doping concentration. The Mo doped anatase TiO₂ will be a very useful photocatalyst with enhanced visible light photocatalytic activity.     

锐钛矿相和金红石相TiO2:Nb的光电性能研究

采用基于密度泛函理论的第一性原理计算了锐钛矿相和金红石相TiO₂:Nb的晶体结构、电子结构和光学性质. 结果表明, 在相等的摩尔掺杂浓度下(6.25%), 锐钛矿相TiO₂:Nb的导带底电子有效质量小于金红石相TiO₂:Nb, 且前者室温载流子浓度是后者的两倍左右, 即具有更大的施主杂质电离率, 从而解释了锐钛矿相TiO₂:Nb比金红石相TiO₂:Nb具有更优异电学性能的实验现象. 光学计算也表明锐钛矿相在可见光区有更大的透过率, 从而在理论上解释了锐钛矿相TiO₂:Nb比金红石相TiO₂:Nb更适于做透明导电材料的原因. 计算结果与实验数据能较好符合. 关键词： 2:Nb')" href="#">TiO₂:Nb 第一性原理 电子结构 光学性能     

锐钛矿型TiO2(101)面原子几何及弛豫结构的第一性原理计算

采用平面波超软赝势方法计算了锐钛矿型TiO₂(101)面的表面能和表面原子弛豫结构.首先对TiO₂(101)面的6种不同的表面原子终止结构的体系总能量进行了计算,结果表明终止原子为两配位的O原子、次层为五配位的Ti原子的表面结构最为稳定.针对该表面研究了表面能和原子弛豫与模型中原子层数和真空厚度的关系,当原子层数为12层,真空厚度为0.4nm时,表面能收敛度小于0.01J/m².研究发现:表面上两配位的O原子向里移动约0.0012nm,五配 关键词： 第一性原理 2')" href="#">TiO₂ 表面结构 弛豫     

Microstructural, optical and photocatalytic properties of CdS doped TiO2 thin films

CdS doped TiO₂ thin films (with CdS content=0, 3, 6, 9 and 12 at%) were grown on glass substrates. The X-ray diffraction analysis revealed that the films are polycrystalline of monoclinic TiO₂ structure. The microstructure parameters of the films such as crystallite size (D_ν) and microstrain (e) are calculated. Both the crystallites size and the microstrain are decreased with increasing CdS content. The optical constants have been determined in terms of Murmann's exact equations. The refractive index and extinction coefficient are increased with increasing CdS content. The optical band gap is calculated in the strong absorption region. The possible optical transition in these films is found to be an allowed direct transition. The values of E_g^opt are found to decrease as the CdS content increased. The films with 3 at% CdS content have better decomposition efficiency than undoped TiO₂. The films with 6 at% and 9 at% CdS content have decomposition efficiency comparable to that of undoped TiO₂, although they have lower band gap. The CdS doped TiO₂ could have a better impact on the decomposing of organic wastes.     

N掺杂锐钛矿TiO2光学性能的第一性原理研究

用平面波赝势方法(PWP)计算了N掺杂锐钛矿型TiO₂前后的光学特性,即介电函数虚部ε₂(ω)，光学吸收系数I(ω)和反射率R(ω). 并从能带结构上解释了为什么掺N后锐钛矿型TiO₂的光学谱在2.93，3.56和3.97eV处相对掺杂前会出现3个峰值的原因. 从光谱图上分析得出，掺杂后TiO₂要发生红移现象，实验现象证实了这一结果. 关键词： N掺杂 2')" href="#">锐钛矿型TiO₂ 光学性能 第一性原理     

Effects of native defects on the electronic structure and photocatalytic activity in anatase TiO2 by first principles calculations

The crystal structure, electronic structure, optical properties and photocatalytic activity of the native defects in anatase TiO₂ were investigated based on the density-functional theory (DFT). The results show that oxygen vacancies (V_O) have the lowest formation energy, and thus are easiest to form in the bulk structure. The conduction and valence band moves to the high or low energy region, and the energy gap becomes narrower for the native point defect models. In particular, oxygen interstitials (O_i) have a direct band gap, and new gap states appear in the band gap, which can be responsible for the high photocatalytic efficiency in anatase TiO₂. The phenomenon of “impurity compensation” takes place for the oxygen and titanium interstitials. Ti vacancy (V_Ti) can promote the utilization of solar light by analyzing the absorption spectra. All the calculated results show that O_i and V_Ti are beneficial in improving the photocatalytic activity of TiO₂ in the UV–visible light range.     

Influence of Au thickness on the optical and electrical properties of transparent and conducting TiO2/Au/TiO2 multilayer films

Au-intermediate TiO₂/Au/TiO₂ (TAT) multilayer films were deposited by RF magnetron sputtering onto glass substrates. Changes in the optical and electrical properties of the films were investigated with respect to the thickness of the Au interlayer.The observed optical and electrical properties were dependent on the thickness of the Au interlayer. The resistivity decreased to 3.3 × 10⁻⁴ Ω cm for TiO₂ films with a 20 nm-thick Au interlayer and the optical transmittance was also influenced by the Au interlayer. Although optical transmittance deteriorated as Au thickness increased, TiO₂ films with a 5 nm-thick Au interlayer showed a relatively high optical transmittance of 80% at a wavelength of 550 nm. In addition, since a TAT film with a 5 nm-thick Au interlayer showed a relatively high work function value, it is an alternative candidate for use as a transparent anode in OLEDs and flat panel displays.     

Structural, optical and electrochemical properties of TiO2 thin films grown by APCVD method

Atmospheric pressure chemical vapor deposition (APCVD) of TiO₂ thin films has been achieved onto glass and onto ITO-coated glass substrates, from the reaction of TiCl₄ with ethyl acetate (EtOAc). The effect of the synthesis temperature on the optical, structural and electrochemical properties was studied through spectral transmittance, X-ray diffraction (XRD) and electrochemical impedance spectroscopy (EIS) measurements. It was established that the TiO₂ films deposited onto glass substrate, at temperatures greater than 400 °C grown with rutile type tetragonal structure, whereas the TiO₂ films deposited onto ITO-coated glass substrate grown with anatase type structure. EIS was applied as suitable method to determine the charge transfer resistance in the electrolyte/TiO₂ interface, typically found in dye-sensitized solar cells.     

Effect of spin polarization on the optical properties of Co-doped TiO2 thin films

A non-linear variation of bandgap energy with Co doping is observed in sputter deposited Co-doped TiO₂ thin films. This peculiar behavior is explained on the basis of mechanical stress in the films together with spin polarization due to s,p-d exchange interaction between the localized Co 3d electrons and delocalized electrons. Quantitative analyses of mechanical stress and grain boundary barrier potential due to spin polarization are performed from the below bandgap absorption tail. Furthermore, anomalous variations in both the refractive indices and extinction coefficients with Co doping are noted and are explained on the basis of ab-initio calculations based on density functional theory.     

萤石结构TiO2的电子结构和光学性质

利用第一性原理计算了立方相萤石TiO₂的晶胞参数,能带结构和电子态密度.结果显示萤石TiO₂属于间接带隙半导体材料,其间接禁带宽度(Γ→X)E_g为2.07eV,比常见的金红石和锐钛矿TiO₂的禁带宽度窄.为了更清楚地了解萤石的光学性质,利用Kramers-Kronig色散关系,分别对萤石和金红石TiO₂的复介电常数、吸收率等参数进行了计算,并将二者结果做了 关键词： 2')" href="#">萤石结构TiO₂ 密度泛函理论 能带结构 光学性质     

萤石结构TiO2的电子结构和光学性质

利用第一性原理计算了立方相萤石TiO₂的晶胞参数，能带结构和电子态密度.结果显示萤石TiO₂属于间接带隙半导体材料，其间接禁带宽度(Γ→X)E_g为2.07eV，比常见的金红石和锐钛矿TiO₂的禁带宽度窄.为了更清楚地了解萤石的光学性质，利用Kramers-Kronig色散关系，分别对萤石和金红石TiO₂的复介电常数、吸收率等参数进行了计算，并将二者结果做了     

Influence of dopant level on structural, optical and magnetic properties of Co-doped anatase TiO2 nanoparticles

Cobalt-doped TiO₂ nanoparticles were synthesized by sol-gel method. The associated structural, optical, compositional and magnetic properties of the nanoparticles as a function of cobalt concentration have been systematically studied. The X-ray powder diffraction reveals that all samples have pure anatase phase tetragonal system and the lattice parameter analysis indicated that Co ions may substitute into the lattice of TiO₂. The average particle size is 15 nm, when found through transmission electron microscope. Optical spectroscopy measurement showed that the bandgap value decreases upon increasing Co concentration. The magnetic measurements revealed that the enhanced room temperature ferromagnetism (RTFM) strongly depends on the doping content.     

S掺杂对锐钛矿相TiO2电子结构与光催化性能的影响

采用基于第一性原理的平面波超软赝势方法研究了掺杂不同价态S的锐钛矿相TiO₂的晶体结构、杂质形成能、电子结构及光学性质.计算结果表明硫在掺杂体系中的存在形态与实验中的制备条件有关;掺杂后晶格发生畸变、原子间的键长及原子的电荷量也发生了变化,导致晶体中的八面体偶极矩增大; S 3p态与O 2p态、Ti 3d态杂化而使导带位置下移、价带位置上移及价带宽化,从而导致TiO₂的禁带宽度变窄、光吸收曲线红移到可见光区.这些结果很好地解释了S掺杂锐钛矿相TiO₂在可见光下具有优良的光催化性能的内在原因.根据计算结果分析比较了硫以不同离子价态掺杂对锐钛矿相TiO₂电子结构和光催化性能影响的差别. 关键词： 2')" href="#">锐钛矿相TiO₂ S掺杂 第一性原理 光催化性能     

锐钛矿型TiO2(101)面本征点缺陷的理论研究

采用平面波超软赝势方法计算了锐钛矿型TiO₂(101)面存在本征空位和间隙点缺陷的几何结构以及缺陷形成能.首先分析了点缺陷对表面结构的影响,发现不同类型缺陷导致缺陷周围原子有不同的位移趋势：O空位的产生导致空位周围的Ti原子向空位外移动,Ti₁和Ti₂空位的产生均使O₁自发地与周围的O原子团聚,O_i原子易被周围的氧原子吸附而成键,而Ti_i2缺陷几乎 关键词： 第一性原理 2')" href="#">TiO₂ 点缺陷 表面结构     

Photoluminescence from xylene modified anatase TiO2 nanocrystals

The surface of anatase TiO₂ nanoparticles was modified by xylene using soxhlet extractor. The photoluminescence (PL) of the modified nanoparticles was investigated. A stable and strong blue luminescence peak at 420 nm can be observed, and the intensity of the PL peak increases with the increase of the extraction time.     

A comparison between optical properties of TiO2 nanowires obtained by EMA method and experiment

Optical properties of TiO₂ nanowires, synthesized by two-step thermal evaporation process, have been studied experimentally and theoretically. Based on the theoretical method optical constants of nanowires have been calculated with the use of the effective medium approximation (EMA). As evidenced by X-ray diffraction patterns our synthesized nanowires, whose diameters and lengths were within the ranges of 50-90 nm and 500-1500 nm, respectively, were found to be crystalline rutile TiO₂ with the major refraction being along the (1 1 0) direction. The experimental data of the reflectance of TiO₂ nanowires has been obtained using spectrometer in wavelength 250-800 nm, and then, compared with the spectrum of reflectance predicted by the EMA theoretical model. Our measured experimental optical data has been found to be in good accord with our predicted results spectrum with the use of the EMA modeling; this agreement indicates that our estimation of the volume fraction from atomic force microscopy (AFM) data was accurate.