Magnetic and transport properties of SmCoAsO1−xFx

A series of SmCoAsO_1−xF_x (with x=0, 0.05, 0.1, and 0.2) samples have been prepared by solid state reactions. X-ray powder diffraction proved that all samples can be indexed as a tetragonal ZrCuSiAs-type structure. A clear shrinkage of the lattice constants a and c with increasing F content indicated that F has been doped into the lattice. The magnetic and transport properties of the samples have been investigated. Parent SmCoAsO compound exhibited complicated magnetism including antiferromagnetism, ferromagnetism, and ferrimagnetism. For the fluorine doped samples, the antiferromagnetic Néel temperatures were almost independent of the F content and metamagnetic transitions were observed below antiferromagnetic Néel temperatures. With increasing F content, high temperature (below 142 K) ferrimagnetic state gradually changed to ferromagnetic state. In the resistivity result, metallic conduction in the region of 2-300 K and Fermi liquid behavior at low temperatures were shown in all samples. Transport properties at applied magnetic fields showed anomalies at low temperatures.     

Irreversible effects in LaGa1−xMnxO3

Quasi-irreversible increase in the electrical conductivity is observed in single crystals of LaGa_1−xMn_xO₃. The effect lasts for long time at room temperature and can be erased by heating of the crystal above the phase transition temperature. We explain the observed effects in terms of ionization and local lattice distortion processes.     

Phonon dynamics of hexagonal Y Mn1−xFexO3

Phonon dynamics was investigated on Y Mn_1−xFe_xO₃(0≤x≤0.20) hexagonal manganite polycrystals. Phonon modes were properly assigned using results obtained on Y MnO₃ single crystal, by mixing the ab plane and the c axis optical responses. Upon increasing the Fe content, most of the phonon mode frequencies do not vary drastically. However, some modes involving Y and O atom displacements along the c axis are affected by doping. Indeed, a redshift of their transverse optical frequency was interpreted as an elongation of Y-O distance along the c-axis, resulting in a change in yttrium coordination.     

Structure and magnetic properties of Sn1−xMnxO2

The microstructure and magnetic properties have been investigated systematically for Sn_1−xMn_xO₂ polycrystalline powder samples with x=0.02-0.08 synthesized by a solid-state reaction method. X-ray diffraction revealed that all samples are pure rutile-type tetragonal phase and the cell parameters a and c decrease monotonously with the increase in Mn content, which indicated that Mn ions substitute into the lattice of SnO₂. Magnetic measurements revealed that all samples exhibit room temperature ferromagnetism. Furthermore, magnetic investigations demonstrate that magnetic properties strongly depend on doping content, x. The average magnetic moment per Mn atom decreases with increase in the Mn content, because antiferromagnetic super-exchange interaction takes place within the neighbor Mn³⁺ ions through O²⁻ ions for the samples with higher Mn doping. Our results indicate that the ferromagnetic property is intrinsic to the SnO₂ system and is not a result of any secondary magnetic phase or cluster formation.     

Non-Fermi-liquid behavior in UCu4+xAl8−x compounds

We report on experimental studies of the Kondo physics and the development of non-Fermi-liquid scaling in UCu_4+xAl_8−x family. We studied 7 different compounds with compositions between x=0 and 2. We measured electrical transport (down to 65 mK) and thermoelectric power (down to 1.8 K) as a function of temperature, hydrostatic pressure, and/or magnetic field.Compounds with Cu content below x=1.25 exhibit long-range antiferromagnetic order at low temperatures. Magnetic order is suppressed with increasing Cu content and our data indicate a possible quantum critical point at x_cr≈1.15. For compounds with higher Cu content, non-Fermi-liquid behavior is observed. Non-Fermi-liquid scaling is inferred from electrical resistivity results for the x=1.25 and 1.5 compounds. For compounds with even higher Cu content, a sharp kink occurs in the resistivity data at low temperatures, and this may be indicative of another quantum critical point that occurs at higher Cu compositions.For the magnetically ordered compounds, hydrostatic pressure is found to increase the Néel temperature, which can be understood in terms of the Kondo physics. For the non-magnetic compounds, application of a magnetic field promotes a tendency toward Fermi-liquid behavior. Thermoelectric power was analyzed using a two-band Lorentzian model, and the results indicate one fairly narrow band (10 meV and below) and a second broad band (around hundred meV). The results imply that there are two relevant energy scales that need to be considered for the physics in this family of compounds.     

Structural,thermal and electrical properties of the semiconductor system Ag(1−x)CuxInSe2

This paper presents a study of bulk samples synthesized of the Ag_1−xCu_xInSe₂ semiconductor system. Structural, thermal and electrical properties, as a function of the nominal composition (Cu content) x=0.0, 0.2, 0.4, 0.6, 0.8, and 1.0 were studied. The influence of x on parameters such as melting temperature, solid phase transition temperature, lattice parameters, bond lengths, crystallite size t (coherent domain), electrical resistivity, electrical mobility and majority carrier concentration was analyzed. The electrical parameters are analyzed at room temperature. In general, it is observed that the properties of the Ag_1−xCu_xInSe₂ system for x≤0.4 are dominated by n-AgInSe₂, while for x>0.4, these are in the domain of p-CuInSe₂. The crystallite size t in the whole composition range (x) is of the order of the nanoparticles. Secondary phases (CuSe, Ag₂Se and InSe) in small proportion were identified by XRD and DTA.     

Structural, optical and dielectric studies of NixZn1−xFe2O4 prepared by auto combustion route

Ni_xZn_1−xFe₂O₄ (0≤x≤1) powders were synthesised by the auto combustion method. The derived samples show well defined peaks of cubic spinal structure with space group Fd3m. The lattice parameter calculated increased from 0.8372 nm to 0.8429 nm with raise of Zn content. The average crystallite sizes were determined by using Debye-Scherer method and found to be in the range of 18-23 nm. Microstructural analyses show the regular and uniform grain morphology. Raman analyses demonstrated that the peaks have symmetric and asymmetric stretching as well as symmetric bending. Fourier transform infrared spectroscopy was used to investigate the structure and shows the changes in the tetrahedral and octahedral bond stretching. Photoluminescence measurements indicated intense emission in the wavelength range lie in blue-green region. The composition with x=0.2 showed highest intensity and explained on the basis of disordered cluster model. Dielectric analyses showed frequency sensitive behaviour in the low frequency region and frequency independent characteristics at high frequency side. The composition with x=0.2 showed highest dielectric constant and lowest dielectric loss in the studied frequency range. The ac conductivity showed a power law behaviour and conduction is explained on the basis of hoping mechanism.     

Sn1−xBixO2 and Sn1−xTaxO2 (0≤x≤0.75): A first-principles study

The structural, elastic, electronic and optical (x=0) properties of doped Sn_1−xBi_xO₂ and Sn_1−xTa_xO₂ (0≤x≤0.75) are studied using the first-principles pseudopotential plane-wave method within the local density approximation. The independent elastic constants C_ij and other elastic parameters of these compounds have been calculated for the first time. The mechanical stability of the compounds with different doping concentrations has also been studied. The electronic band structure and density of states are calculated and the effect of doping on these properties is also analyzed. It is seen that the band gap of the undoped compound narrowed with dopant concentration, which disappeared for x=0.26 for Bi doping and 0.36 for Ta doping. The materials thus become conductive oxides through the change in the electronic properties of the compound for x≤0.75, which may be useful for potential application. The calculated optical properties, e.g. dielectric function, refractive index, absorption spectrum, loss-function, reflectivity and conductivity of the undoped SnO₂ in two polarization directions are compared with both previous calculations and measurements.     

BiFeO3/Zn1−xMnxO bilayered thin films

BiFeO₃/Zn_1−xMn_xO (x = 0-0.08) bilayered thin films were deposited on the SrRuO₃/Pt/TiO₂/SiO₂/Si(1 0 0) substrates by radio frequency sputtering. A highly (1 1 0) orientation was induced for BiFeO₃/Zn_1−xMn_xO. BiFeO₃/Zn_1−xMn_xO thin films demonstrate diode-like and resistive hysteresis behavior. A remanent polarization in the range of 2P_r ∼ 121.0-130.6 μC/cm² was measured for BiFeO₃/Zn_1−xMn_xO. BiFeO₃/Zn_1−xMn_xO (x = 0.04) bilayer exhibits a highest M_s value of ∼15.2 emu/cm³, owing to the presence of the magnetic Zn_0.96Mn_0.04O layer with an enhanced M_s value.     

The structure and luminescence properties of long afterglow phosphor Y3−xMnxAl5−xSixO12

A series of phosphors with the composition Y_3−xMn_xAl_5−xSi_xO₁₂ (x=0, 0.025, 0.050, 0.075, 0.150, 0.225, 0.300) were prepared with solid state reactions. The X-ray powder diffraction analysis of samples shows that the substitution of Mn²⁺ and Si⁴⁺ does not change the garnet structure of phosphors, but makes the interplanar distance decrease to a certain extent. The emission spectra show that Mn²⁺ in Y₃Al₅O₁₂ emits yellow-orange light in a broad band. With the increment of substitution content, the emission intensity of the phosphors increases firstly then decreases subsequently, and the emission peak moves to longer wavelength. Afterglow spectra and decay curves show that all the Mn²⁺ and Si⁴⁺ co-doped samples emit yellow-orange light with long afterglow after the irradiation of ultraviolet light. The longest afterglow time is 18 min. Thermoluminescence measurement shows that there exist two kinds of traps with different depth of energy level and their depth decreases with the increment of substitution content.     

Synthesis and magnetic properties of ferrites spinels MgxCu1−xFe2O4

Polycrystalline Mg_0.6Cu_0.4Fe₂O₄ ferrites have been prepared using solid-state reaction technique. Their structural and magnetic properties have been studied, using X-ray diffraction and magnetic measurements.Using mean field theory and high-temperature series expansions (HTSE), extrapolated with the padé approximants method, the magnetic properties of Mg_1−xCu_xFe₂O₄ have been studied. The nearest neighbor super-exchange interactions for intra-site and inter-site of the Mg_1−xCu_xFe₂O₄ ferrites spinels, in the range 0≤x≤1, have been computed using the probability approach, based on Mössbauer data. The Curie temperature T_c is calculated as a function of Mg concentration. The obtained theoretical results are in good agreement with experimental ones obtained by magnetic measurements.     

Structural and magnetic properties of Cu1−xMnxO nanocrystal prepared by combustion synthesis

Nanoscale Cu_1−xMn_xO powder is prepared by using the combustion synthesis technique with two different fuels. The structural properties of the powder are determined using Rietveld refinement of X-ray diffraction data, high-resolution transmission electron microscopy, and Fourier transform infrared spectroscopy, while its magnetic properties are analyzed by means of hysteresis loop and temperature dependence of magnetization. The results show that (1) the Cu_1−xMn_xO nanocrystal is of monoclinic CuO structure, with grain size of 10-30 nm varying with the type of fuel, the nitrate/fuel ratio (N/F), and the Mn concentration, the doping of Mn has a little influence on the lattice parameters; (2) when the Mn concentration is higher than 7%, a small amount of impurity phase of CuMn₂O₄ appears and annihilates the potential cation vacancies; (3) all of the samples with x≥5% exhibit low-temperature ferromagnetism with the Curie temperature of ∼90 K, which increases slightly by raising the Mn concentration; (4) the paramagnetic moment per Mn ion is around 2-4 bohr magneton above the Curie temperature, which decreases with increasing Mn concentration, implying that the nearest Mn ions are antiferromagnetically coupled and the ferromagnetic order could originate from the super-exchange of next nearest Mn ions along the [1 0 1?] direction.     

Room temperature ferromagnetism behavior of Sn1−xMnxO2 powders

In this paper, we have investigated Mn-doped SnO₂ powder samples prepared by solid-state reaction method. X-ray diffraction showed a single phase polycrystalline rutile structure. The atomic content of Mn ranged from ∼0.8 to 5 at%. Room temperature M-H loops showed a ferromagnetic behavior for all samples. The ferromagnetic Sn_0.987Mn_0.013O₂ showed a coercivity H_c=545 Oe, which is among the highest reported for dilute magnetic semiconductors. The magnetic moment per Mn atom was estimated to be about 2.54 μ_B of the Sn_0.9921Mn_0.0079O₂ sample. The average magnetic moment per Mn atom sharply decreases with increasing Mn content, while the effective fraction of the Mn ions contributing to the magnetization decreases. The magnetic properties of the Sn_1−xMn_xO₂ are discussed based on the competition between the antiferromagnetic superexchange coupling and the F-center exchange coupling mechanism, in which both oxygen vacancies and magnetic ions are involved.     

Magnetic and related properties of the solid solution CeCuxGa4−x

Physical properties of polycrystalline samples of CeCu_xGa_4−x (x = 0.2–1.4), crystallizing in the tetragonal BaAl₄-type structure (space group I 4/mmm), were studied by means of X-ray powder diffraction, magnetization, specific heat, electrical resistivity and magnetoresistivity measurements in wide temperature and magnetic fields ranges. The unit-cell volume of the system was found to decrease with increasing x (in total by about 4%) but the magnetic moments of Ce³⁺ ions remain localized in the whole x-range studied. The alloys exhibit ferromagnetic order at low temperatures, which manifests itself as distinct and relatively sharp anomalies in all the temperature characteristics measured. The ordering temperature decreases with increasing the Cu content from 5.5(1) K for x = 0.2 down to 1.35(5) K for x = 1.4, and the electrical transport properties of the system show some features characteristic of Kondo lattices.     

Synthesis, structural and magnetic study of polycrystalline LaNi1−xMnxO3 films

Polycrystalline double perovskite LaNi_1−xMn_xO₃ (x=0.3, 0.4, 0.5 and 0.7, which is defined as Mn03, Mn04, Mn05 and Mn07, respectively) thin films are successfully deposited on Si (1 0 0) substrates via chemical solution deposition method. Their structural and magnetic properties are measured. All the thin films are of single phase. Raman spectra indicate that relative intensity of Mn05 is stronger than that of others that can be attributed to the higher degree of B-site ordering. The low temperature magnetic moment of Mn05 is about 500 emu/cm³, which is obviously larger than that of Mn03 and Mn07 because of the long-range ordering of Mn and Ni ions in Mn05.     

Structural and magnetic properties of sol-gel Co2xNi0.5−x Zn0.5−xFe2O4 thin films

Nanocrystalline Co_2xNi_0.5−xZn_0.5−xFe₂O₄ (x=0−0.5) thin films have been synthesized with various grain sizes by a sol-gel method on polycrystalline silicon substrates. The morphology as well as magnetic and microwave absorption properties of the films calcined at 1073 K were studied using X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and vibrating sample magnetometry. All films were uniform without microcracks. The Co content in the Co-Ni-Zn films resulted in a grain size ranging from 15 to 32 nm while it ranged from 33 to 49 nm in the corresponding powders. Saturation and remnant magnetization increased with increase in grain size, while coercivity demonstrated a drop due to multidomain behavior of crystallites for a given value of x. Saturation magnetization increased and remnant magnetization had a maximum as a function of grain size independent of x. In turn, coercivity increased with x independent of grain size. Complex permittivity of the Co-Ni-Zn ferrite films was measured in the frequency range 2-15 GHz. The highest hysteretic heating rate in the temperature range 315-355 K was observed in CoFe₂O₄. The maximum absorption band shifted from 13 to 11 GHz as cobalt content increased from x=0.1 to 0.2.     

Bulk Sn1−xMnxO2 magnetic semiconductors without room-temperature ferromagnetism

Polycrystalline Sn_1−xMn_xO₂ (0≤x≤0.05) diluted magnetic semiconductors were prepared by solid-state reaction method and their structural and magnetic properties had been investigated systematically. The three Mn-doped samples (x=0.01, 0.03, 0.05) undergo paramagnetic to ferromagnetic phase transitions upon cooling, but their Curie temperatures are far lower than room temperature. The magnetization cannot be attributed to any identified impurity phase. It is also found that the magnetization increases with increasing Mn doping, while the ratio of the Mn ions contributing to ferromagnetic ordering to the total Mn ions decreases.     

Synthesis and structural study of LaNi1−xMnxO3+δ perovskites

The synthesis of LaNi_1−xMn_xO_3+δ samples with different oxygen contents has been performed. Structural characterization was carried out by X-ray and neutron powder diffraction. The crystallographic structure of stoichiometric samples, δ=0, evolves from an orthorhombic (LaMnO₃) to a rhombohedral (LaNiO₃) unit cell. Oxygen excess, δ>0, seems to stabilize the rhombohedral unit cell. For instance, the unit cells at room temperature are orthorhombic and rhombohedral for LaNi_0.1Mn_0.9O_3.0 and LaNi_0.1Mn_0.9O_3.13, respectively. The X-ray patterns show the coexistence of both phases for LaNi_0.5Mn_0.5O_3+δ at room temperature. This coexistence is not ascribed to chemical inhomogeneities, but to a structural phase transition. Neutron patterns collected from 1.5 to 300 K show a continuous evolution except for LaNi_0.5Mn_0.5O_3.08 and LaNi_0.1Mn_0.9O_3.13, which show a phase transition at around 290 and 220 K, respectively. The neutron patterns suggest the presence of an ordered arrangement of Ni and Mn atoms in the crystallographic unit cell. Such arrangement indicates that LaNi_0.5Mn_0.5O₃ could be considered as a double perovskite (nominal formula, La₂NiMnO₆).     

Structural and magnetic properties of MnxCo1−xFe2O4 ferrite nanoparticles

We report on the structural and magnetic properties of nanoparticles of Mn_xCo_1−xFe₂O₄ (x=0.1, 0.5) ferrites produced by the glycothermal reaction. From the analysis of XRD spectra and TEM micrographs, particle sizes of the samples have been found to be about 8 nm (for x=0.1) and 13 nm (for x=0.5). The samples were characterized by DC magnetization in the temperature range 5-380 K and in magnetic fields of up to 40 kOe using a SQUID magnetometer. Mössbauer spectroscopy results show that the sample with higher Mn content has enhanced hyperfine fields after thermal annealing at 700 °C. There is a corresponding small reduction in hyperfine fields for the sample with lower Mn content. The variations of saturation magnetization, remnant magnetization and coercive fields as functions of temperature are also presented. Our results show evidence of superparamagnetic behaviour associated with the nanosized particles. Particle sizes appear to be critical in explaining the observed properties.     

Superconductivity coexisting with ferromagnetism in mixed-valence Mn doped La1.85−(4/3)xSr0.15+(4/3)xCu1−xMnxO4

The effect of Mn substitution for Cu in mixed-valence Mn doped La_{1.85−(4/3)x}Sr_0.15+(4/3)xCu_1−xMn_xO₄ (x=0.06) has been investigated by electric resistivity, magnetization and electron spin resonance experiments. Coexistence of superconductivity and ferromagnetism was observed.