CO2在氨基改性MIL-101(Cr)中吸附的分子模拟

采用实验与分子模拟结合的方法研究298 K下CO₂在氨基改性得到的MIL-101（Cr）-NH₂和MIL-101（Cr）-ED（ED：乙二胺）上的吸附性能。比较MIL-101（Cr）、MIL-101（Cr）-NH₂和MIL-101（Cr）-ED的吸附等温线与吸附热的结果,表明采用直接合成改性法得到的MIL-101（Cr）-NH₂比采用合成后再改性得到的MIL-101（Cr）-ED有更高的CO₂吸附容量。进一步比较密度分布图和径向密度分布曲线,分析CO₂在氨基改性MIL-101（Cr）中的吸附位,表明在低压下CO₂首先吸附在MIL-101（Cr）微孔的超级四面体中,随着吸附压力的增大逐渐填充到更大的孔中。氨基的存在增加了CO₂的吸附位点,使MIL-101（Cr）-NH₂具有较高CO₂吸附容量;同时MIL-101（Cr）-ED中的ED分子的存在增加了CO₂的吸附位点,使MIL-101（Cr）-ED也具有较高CO₂吸附容量;但是MIL-101（Cr）-ED中的ED分子占据了MIL-101（Cr）中Cr的吸附位点,使Cr对CO₂的吸附强度减弱,同时可吸附位点少于MIL-101（Cr）-NH₂,导致其对CO₂的吸附容量少于MIL-101（Cr）-NH₂。     

CO2在氨基改性MIL-101(Cr)中吸附的分子模拟

采用实验与分子模拟结合的方法研究298 K下CO_2在氨基改性得到的MIL-101(Cr)-NH_2和MIL-101(Cr)-ED(ED:乙二胺)上的吸附性能。比较MIL-101(Cr)、MIL-101(Cr)-NH_2和MIL-101(Cr)-ED的吸附等温线与吸附热的结果,表明采用直接合成改性法得到的MIL-101(Cr)-NH_2比采用合成后再改性得到的MIL-101(Cr)-ED有更高的CO_2吸附容量。进一步比较密度分布图和径向密度分布曲线,分析CO_2在氨基改性MIL-101(Cr)中的吸附位,表明在低压下CO_2首先吸附在MIL-101(Cr)微孔的超级四面体中,随着吸附压力的增大逐渐填充到更大的孔中。氨基的存在增加了CO_2的吸附位点,使MIL-101(Cr)-NH_2具有较高CO_2吸附容量;同时MIL-101(Cr)-ED中的ED分子的存在增加了CO_2的吸附位点,使MIL-101(Cr)-ED也具有较高CO_2吸附容量;但是MIL-101(Cr)-ED中的ED分子占据了MIL-101(Cr)中Cr的吸附位点,使Cr对CO_2的吸附强度减弱,同时可吸附位点少于MIL-101(Cr)-NH_2,导致其对CO_2的吸附容量少于MIL-101(Cr)-NH_2。     

Pt/MIL-101(Cr)在肉桂醛选择性加氢反应中的催化性能

采用简单易行的浸渍法将Pt纳米粒子负载到MIL-101(Cr)上, 制备了Pt/MIL-101(Cr)催化剂, 并对其在肉桂醛选择性加氢反应的催化性能进行了研究。XRD、N₂吸附、TEM和催化性能的研究结果表明, Pt的负载量对负载于MIL-101(Cr)上Pt纳米粒子的尺寸及所制备催化剂对肉桂醇的选择性有很大影响。低Pt负载量(1.0wt%)的Pt/MIL-101(Cr)较其他MOFs和无机材料在肉桂醛选择性加氢反应中表现出了高的催化性能, 在优化的反应条件下肉桂醛转化率和对肉桂醇的选择性可分别达96.5%和86.2%。Pt/MIL-101(Cr)催化剂具有良好的稳定性。Pt/MIL-101(Cr)所表现出的优良的催化性能同MIL-101(Cr)载体的孔道结构及其表面性质密切相关。     

Pt/MIL-101(Cr)在肉桂醛选择性加氢反应中的催化性能

采用简单易行的浸渍法将Pt纳米粒子负载到MIL-101(Cr)上,制备了Pt/MIL-101(Cr)催化剂,并对其在肉桂醛选择性加氢反应的催化性能进行了研究。XRD、N₂吸附、TEM和催化性能的研究结果表明,Pt的负载量对负载于MIL-101(Cr)上Pt纳米粒子的尺寸及所制备催化剂对肉桂醇的选择性有很大影响。低Pt负载量(1.0%)的Pt/MIL-101(Cr)较其他MOFs和无机材料在肉桂醛选择性加氢反应中表现出了高的催化性能,在优化的反应条件下肉桂醛转化率和对肉桂醇的选择性可分别达96.5%和86.2%。Pt/MIL-101(Cr)催化剂具有良好的稳定性。Pt/MIL-101(Cr)所表现出的优良的催化性能同MIL-101(Cr)载体的孔道结构及其表面性质密切相关。     

五乙烯六胺改性金属有机骨架材料MIL-101(Cr)对CO_2的吸附性能

采用溶剂热法合成金属有机骨架材料MIL-101(Cr),用回流法将五乙烯六胺(PEHA)负载到MIL-101(Cr)孔道中的不饱和金属位点上,使用扫描电镜、粉末X射线衍射、氮气物理吸附、元素分析和傅里叶变换红外光谱等表征手段考察材料的结构和形貌,测试氨基改性前后的MIL-101(Cr)在25℃、不同压力下对CO_2的吸附效果。结果表明,负载0.24 m L五乙烯六胺后的MIL-101(Cr)对CO_2的吸附效果最好,在25℃、常压下对CO_2的饱和吸附量可达58.944 mg/g,相比未负载五乙烯六胺的MIL-101(Cr)吸附量(CO_2饱和吸附量为44.208 mg/g)增加了33%。随着吸附压力的增加,MIL-101(Cr)和0.24PEHAM IL-101(Cr)对CO_2的饱和吸附量逐渐增加,当吸附压力为1.1 MPa时,两者的吸附量分别为1 147.59和1 256.74 mg/g,表明该类材料在高压下对CO_2有着良好的吸附效果。     

季铵功能化的金属有机骨架对水中双氯芬酸钠的高效吸附与去除

通过两步合成法制备了季铵功能化的金属有机骨架MIL-101（Cr）即MIL-101（Cr）-NMe₃,并考察了该材料对双氯芬酸钠（DCF）的吸附行为。通过不同浓度的DCF在MIL-101（Cr）-NMe₃吸附剂上的动力学数据,以及在不同温度下的吸附平衡等温线和MIL-101（Cr）-NMe₃吸附剂的重复使用性能考察,发现该材料对DCF的吸附过程符合准二级动力学方程,吸附平衡等温线符合Langmuir等温吸附模型,在20℃下的最大吸附量为310.6 mg/g,5次循环使用后吸附量未明显减少。MIL-101（Cr）-NMe₃对DCF的吸附作用机理可归结为静电相互作用和π-π相互作用,吸附效果远大于未修饰氨基的MIL-101（Cr）。可以预见该材料对水中DCF的去除具有良好的应用前景。     

A 3D MIL-101@rGO composite as catalyst for efficient conversion of straw cellulose into valuable organic acid

Efficient conversion of straw cellulose to chemicals or fuels is an attracting topic today for the utilization of biomass to substitute for fossil resources. The development of catalysts is of vital importance.In this work, a composite catalyst metal-organic frameworks(MOFs) immobilized on three-dimensional reduced graphene oxide(3D-r GO) were synthesized by in situ growth of the MIL-101(Cr) within the 3Dr GO matrix. The supporting of 3D-r GO guaranteed the dispersion and acid site density of MI...     

A new Brønsted acid MIL-101(Cr) catalyst by tandem post-functionalization; synthesis and its catalytic application

A new heterogeneous Brønsted solid acid catalyst was prepared by tandem post-functionalization of MIL-101(Cr) and utilized for acetic acid esterification and alcoholysis of epoxides under solvent-free conditions. First, MIL-101(Cr) was functionalized with pyrazine to achieve MIL-101(Cr)-Pyz. Afterwards, the nucleophilic reaction of MIL-101(Cr)-Pyz with 1,3-propane sultone and next acidification with diluted sulfuric acid gave MIL-101(Cr)-Pyz-RSO₃H Brønsted solid acid catalyst. Various characterization methods such as Fourier transformation infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), elemental analysis (CHNS), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy-dispersiveX-ray(EDX) spectroscopy, thermal analysis (TGA/DTA), acid–base titration, and N₂ adsorption/desorption analysis were employed to fully characterize the prepared catalyst. The catalyst showed high activity compared to unmodified MIL-101(Cr) in both catalytic acetic acid esterification and alcoholysis of epoxides. It can also be readily isolated from the reaction mixture and reused three times without major decrease in its activity.     

Synthesis of a hybrid MIL-101(Cr)/ZTC composite for hydrogen storage applications

Metal–organic frameworks (MOFs) hybrid composites have recently attracted considerable attention in hydrogen storage applications. In this study a hybrid composite of zeolite templated carbon (ZTC) and Cr-based MOF (MIL-101) was synthesised by adding the templated carbon in situ during the synthesis of MIL-101(Cr). The obtained sample was fully characterized and hydrogen adsorption measurements performed at 77 K up to 1 bar. The results showed that the surface areas and the hydrogen uptake capacities of individual MIL-101 (2552 m² g^?1, 1.91 wt%) and zeolite templated carbon (2577 m² g^?1, 2.39 wt%) could be enhanced when a hybrid MIL-101(Cr)/ZTC composite (2957 m² g^?1, 2.55 wt%) was synthesized. The procedure presents a simple way for enhancement of hydrogen uptake capacity of the individual Cr-MOF and templated carbon samples.     

铬-对苯二甲酸MOF的框架异构：MIL-88B(Cr)和MIL-101(Cr)

可以通过简单地控制乙酸浓度的方法,在相似的水热合成条件下合成2种同一家族的金属有机框架材料(MOFs):MIL-88B(Cr)和MIL-101(Cr)。在相对较低的乙酸浓度下,可以得到平均粒径为100 nm的MIL-101(Cr),并拥有很高的BET比表面积(3543 m^2·g^-1)。而在相对较高的乙酸浓度下,则可得到另一种具有“呼吸”特性结构的MOF——MIL-88B(Cr)。利用粉末X射线衍射、扫描电镜、N2吸附-脱附分析、热重分析等对它们的结构、形貌、孔隙率等性质做了详细的分析。     

Palladium nanoparticles encapsulated in a metal-organic framework as efficient heterogeneous catalysts for direct C2 arylation of indoles

Highly dispersed palladium nanoparticles (Pd NPs) encapsulated in the mesoporous cages of the metal-organic framework (MOF) MIL-101(Cr) have been prepared by using the wetness impregnation method. The Pd NPs were characterized by powder X-ray diffraction (PXRD), N(2) adsorption, transmission electron microscopy, inductively coupled plasma atomic emission spectroscopy (ICP-AES), and X-ray photoelectron spectroscopy (XPS). The particles size ((2.6±0.5) nm) of the obtained Pd NPs was in good agreement with the cage diameters (2.9 and 3.4 nm) of the MOF. The resulting Pd/MIL-101(Cr) catalyst exhibited extremely high catalytic activities in the direct C2 arylation of substituted indoles by using only 0.1 mol% of the Pd catalyst. Moreover, the catalyst is easily recoverable and can be reused several times without leaching into solution and loss of activity. The combination of the highly dispersible Pd NPs within the accessible mesoporous cages and the favorable adsorption of the aryl halides on MIL-101 are suspected to be the main reasons for the observed high activities of the Pd/MIL-101(Cr) catalyst in the direct C2 arylation of indoles.     

Facile magnetization of metal-organic framework MIL-101 for magnetic solid-phase extraction of polycyclic aromatic hydrocarbons in environmental water samples

The unusual properties such as high surface area, good thermal stability, uniform structured nanoscale cavities and the availability of in-pore functionality and outer-surface modification make metal-organic frameworks (MOFs) attractive for diverse analytical applications. However, integration of MOFs with magnets for magnetic solid-phase extraction for analytical application has not been attempted so far. Here we show a facile magnetization of MOF MIL-101(Cr) for rapid magnetic solid-phase extraction of polycyclic aromatic hydrocarbons (PAHs) from environmental water samples. MIL-101 is attractive as a sorbent for solid-phase extraction of pollutants in aqueous solution due to its high surface area, large pores, accessible coordinative unsaturated sites, and excellent chemical and solvent stability. In situ magnetization of MIL-101 microcrystals as well as magnetic solid-phase extraction of PAHs was achieved simultaneously by simply mixing MIL-101 and silica-coated Fe(3)O(4) microparticles in a sample solution under sonication. Such MOF-based magnetic solid-phase extraction in combination with high-performance liquid chromatography gave the detection limits of 2.8-27.2 ng L(-1) and quantitation limits of 6.3-87.7 ng L(-1) for the PAHs. The relative standard deviations for intra- and inter-day analyses were in the range of 3.1-8.7% and 6.1-8.5%, respectively. The results showed that hydrophobic and π-π interactions between the PAHs and the framework terephthalic acid molecules, and the π-complexation between PAHs and the Lewis acid sites in the pores of MIL-101 play a significant role in the adsorption of PAHs.     

Adsorption of antimony using amino-functionalized magnetic MIL-101(Cr): Optimization by response surface methodology

Amino-functionalized magnetic MIL-101(Cr) was prepared via a one-step solvothermal method, characterized, and applied in adsorptive Sb(III) removal. The effects of solution pH, adsorbent dosage, and coexisting substances on the adsorption of Sb(III) by MIL-101(Cr)–NH₂/MnFe₂O₄ were studied. The adsorption kinetics were analyzed using pseudo-first order, pseudo-second order, intraparticle diffusion, and Elovich models, while Freundlich and Langmuir isotherm models were used to fit the experimental data. The pseudo-second-order kinetic model provided the best fit for the kinetic data. The maximum adsorption capacity of MIL-101(Cr)–NH₂/MnFe₂O₄ for Sb(III) was 91.07 ​mg/g, as calculated using the Langmuir adsorption isotherm model. Thermodynamic analysis revealed that the adsorption of antimony onto MIL-101(Cr)–NH₂/MnFe₂O₄ is spontaneous and endothermic, while response surface optimization revealed that the optimal conditions for Sb(III) adsorption by MIL-101(Cr)–NH₂/MnFe₂O₄ are an adsorbent loading of 222.55 ​mg/L, a pH of 4.5, and a temperature of 294.59 ​K. The predicted adsorption capacity of MIL-101(Cr)–NH₂/MnFe₂O₄ for Sb(III) is only a 1.8% deviation from the actual value. Furthermore, MIL-101(Cr)–NH₂/MnFe₂O₄ exhibits strong magnetism, allowing it to be separated from wastewater using a magnet. Finally, a preliminary economic analysis showed that the cost of treating a ton wastewater containing 25 ​mg/L antimony using this composite would be 26.24 USD. Thus, MIL-101(Cr)–NH₂/MnFe₂O₄ is promising for treatment of Sb(III)-containing wastewater.     

Encapsulation of Microperoxidase-8 into MIL-101(Cr/Fe) Nanoparticles: A New Biocatalyst for the Epoxidation of Styrene

A new biocatalyst MP8@MIL-101(Cr/Fe) was prepared by immobilization of a heme octapeptide, Microperoxidase 8 (MP8) within a mixed metal MOF, MIL-101(Cr/Fe). Both MIL-101(Cr/Fe) and MP8@MIL-101(Cr/Fe) were characterized by PXRD, FTIR spectroscopy and TGA. The catalytic activity of MP8@MIL-101(Cr/Fe) for the oxidation of styrene by H₂O₂ and tBuOOH was then examined under various reaction conditions (nature of the co-solvent and of the oxidant, concentration of the oxidant and of the substrate, time, pH) and compared to that of MP8 alone. Under the best conditions used, MP8@MIL-101(Cr/Fe) was then shown to catalyze the oxidation of styrene about 3 times more efficiently than MP8 alone with approximately 50 % selectivity for styrene oxide.     

Immobilized Pd on a NHC functionalized metal–organic framework MIL-101(Cr): an efficient heterogeneous catalyst in Suzuki−Miyaura coupling reaction in water

A novel Pd−NHC functionalized metal–organic framework (MOF) based on MIL-101(Cr) was synthesized and used as an efficient heterogeneous catalyst in the C-C bond formation reactions. Using this heterogeneous Pd catalyst system, the Suzuki−Miyaura coupling reaction was accomplished well in water, and coupling products were obtained in good to excellent yields in short reaction time. The Pd−NHC−MIL-101(Cr) was characterized using some different techniques, including Fourier transform-infrared, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy, inductively coupled plasma and elemental analysis. The microscopic techniques showed the discrete octahedron structure of MIL-101(Cr), which is also stable after chemical modification process to prepare the catalyst system. The TEM images of the catalyst showed the existence of palladium nanoparticles immobilized in the structure of the catalyst, while no reducing agent was used. It seems that the NHC groups and imidazolium moieties in the structure of the MOF can reduce Pd (II) to Pd (0) species. This modified MOF substrate can also prevent aggregation of Pd nanoparticles, resulting in high stability of them in organic transformation. The Pd−NHC−MIL-101(Cr) catalyst system could be simply extracted from the reaction mixture, providing an efficient synthetic method for the synthesis of biaryls derivatives using the aforementioned coupling reaction. The Pd−NHC−MIL-101(Cr) catalyst could be recycled in this organic reaction with almost consistent catalytic efficiency.     

Control of the coordination status of the open metal sites in metal-organic frameworks for high performance separation of polar compounds

Metal-organic frameworks (MOFs) with open metal sites have great potential for enhancing adsorption separation of the molecules with different polarities. However, the elution and separation of polar compounds on such MOFs packed columns using nonpolar solvents is difficult due to too strong interaction between polar compounds and the open metal sites. Here, we report the control of the coordination status of the open metal sites in MOFs by adjusting the content of methanol (MeOH) in the mobile phase for fast and high-resolution separation of polar compounds. To this end, high-performance liquid chromatographic separation of nitroaniline, aminophenol and naphthol isomers, sulfadimidine, and sulfanilamide on the column packed with MIL-101(Cr) possessing open metal sites was performed. The interaction between the open metal sites of MIL-101(Cr) and the polar analytes was adjusted by adding an appropriate amount of MeOH to the mobile phase to achieve the effective separation of the polar analytes due to the competition of MeOH with the analytes for the open metal sites. Fourier transform infrared spectra and X-ray photoelectron spectra confirmed the interaction between MeOH and the open metal sites of MIL-101(Cr). Thermodynamic parameters were measured to evaluate the effect of the content of MeOH in the mobile phase on the separation of polar analytes on MIL-101(Cr) packed column. This approach provides reproducible and high performance separation of polar compounds on the open metal sites-containing MOFs.     

Metal organic framework–organic polymer monolith stationary phases for capillary electrochromatography and nano-liquid chromatography

In this study, metal organic framework (MOF)–organic polymer monoliths prepared via a 5-min microwave-assisted polymerization of ethylene dimethacrylate (EDMA), butyl methacrylate (BMA), and 2-acrylamido-2-methylpropane sulfonic acid (AMPS) with the addition of various weight percentages (30–60%) of porous MOF (MIL-101(Cr)) were developed as stationary phases for capillary electrochromatography (CEC) and nano-liquid chromatography (nano-LC). Powder X-ray diffraction (PXRD) patterns and nitrogen adsorption/desorption isotherms of these MOF–organic polymer monoliths showed the presence of the inherent characteristic peaks and the nano-sized pores of MIL-101(Cr), which confirmed an unaltered crystalline MIL-101(Cr) skeleton after synthesis; while energy dispersive spectrometer (EDS) and micro-FT-IR spectra suggested homogenous distribution of MIL-101(Cr) in the MIL-101(Cr)–poly(BMA–EDMA) monoliths. This hybrid MOF–polymer column demonstrated high permeability, with almost 800-fold increase compared to MOF packed column, and efficient separation of various analytes (xylene, chlorotoluene, cymene, aromatic acids, polycyclic aromatic hydrocarbons and trypsin digested BSA peptides) either in CEC or nano-LC. This work demonstrated high potentials for MOF–organic polymer monolith as stationary phase in miniaturized chromatography for the first time.     

磺酸功能化金属-有机骨架吸附脱氮性能

以硝基甲烷为溶剂,采用三氟甲磺酸酐(Tf2O)和浓硫酸对金属有机骨架材料MIL-101(Cr){Cr3F(H2O)2O[(O2C)-C6H4-(CO2)]3nH2O(n~25)}进行磺酸功能化修饰,使其孔壁配体上形成磺酸基团.通过改变MIL-101(Cr)、Tf2O和浓硫酸的摩尔配比,得到含有不同磺酸基团数量的S-MIL-101(Cr),对磺化后的材料进行了X射线衍射(XRD)、傅里叶变换红外(FTIR)、氮气物理吸附、酸碱电位滴定以及热重分析(TGA)表征.结果表明,磺酸功能化后MIL-101(Cr)的孔道结构仍然保持,比表面积和孔径有所下降,表面磺酸基团的数量根据磺化程度的不同从0.21到0.42 mmol g-1不等.将磺酸功能化后的MIL-101(Cr)用于液体燃料的吸附脱氮,发现磺酸功能化能够增强MIL-101(Cr)与含氮化合物的相互作用,有利于其对碱性氮化物的吸附脱除.相对于未经磺化的样品,按照摩尔配比n(MIL-101(Cr)):n(H2SO4):n(Tf2O)=1:3:4.5反应得到的磺酸功能化MIL-101(Cr)对喹啉和吲哚的吸附量提高较大,其对喹啉和吲哚的Langmuir最大吸附量分别提高了12.2%和6.3%.通过乙醇洗涤,吸附剂可再生,经过三次再生之后的吸附剂对模拟燃料中含氮化合物的吸附量没有明显的降低.     

MIL-101(Cr)-NH2负载Pd低温催化糠醛高选择性加氢生成四氢糠醇

随着资源枯竭和环境污染严重问题的凸显,生物质转化的研究越来越多,特别是生物质催化裂解制备生物燃料及高附加值的化学品.糠醛是一种半纤维素酸解的产物,也是生产糠醇、四氢糠醇、2-甲基呋喃、环戊酮等的重要原料.其中四氢糠醇既可以用于生产其他高附加值化学品,也可以用作生物燃料或者燃料添加剂.虽然Pd/MFI,Ni/SiO2,Pd-Ir/SiO2等催化剂均可用于糠醛选择加氢制备四氢糠醇,但是反应通常在高温高压条件下进行.为此我们希望找到一种在温和条件下使用的高效催化剂.MOF多孔材料具有丰富的孔道结构、极高的比表面积、表面可修饰的特点,还可与其他客体发生相互作用,进而影响催化性能.因此本课题组合成了一种含有氨基的MOF材料MIL-101(Cr)-NH2,进一步利用表面氨基吸附Pd的氯酸盐前体,经还原直接制得负载型催化剂Pd@MIL-101(Cr)-NH2,并用于糠醛选择加氢反应.本文采用X射线粉末衍射(PXRD)、热重分析(TG)、N2物理吸附-脱附、透射电镜(TEM)等手段表征了所制的MOFs和催化剂.通过将MIL-101(Cr)-NH2和不同Pd@MIL-101(Cr)-NH2的XRD谱与标准谱图对比,发现MIL-101(Cr)-NH2已成功合成,并在催化剂制备过程中和反应之后仍然保持稳定.TG结果表明,所制备MIL-101(Cr)-NH2在低于350 ℃C时结构不会被破环.MIL-101(Cr)-NH2的比表面积可达到1669 m2g?1,孔容达1.35 cm3g?1,从而为Pd纳米粒子均匀分散在载体上提供了可能性.各Pd@MIL-101(Cr)-NH2样品的TEM照片我们看出,Pd纳米粒子可均匀分散在MIL-101(Cr)-NH2上,粒径为3?4 nm.对比实验表明,氨基与金属的相互作用有利于Pd纳米粒子分散均匀.将Pd@MIL-101(Cr)-NH2用于糠醛选择加氢反应时,在40 ℃C,2 MPa H2的温和条件下,反应6 h后糠醛完全转化为四氢糠醇其选择性接近100%.表现出比文献报导的更加优异的催化性能.这得益于高度均匀分散的Pd纳米粒子,以及催化剂载体与Pd纳米粒子的配位作用和π-π相互作用.结果还表明当高于80℃C反应时,即有副产物生成,进一步提高反应温度会促进环戊酮的生成.可见,Pd@MIL-101(Cr)-NH2所表现的低温高加氢活性对提高四氢糠醇选择性至关重要.