Syntheses, crystal structures and SHG properties of a series of polar alkali-metal molybdenum(VI) selenites based on strandberg-type [Mo5O15(SeO3)2]4- polyanion

Four new quaternary molybdenum selenites, namely, HRb(3)(Mo(5)O(15))(SeO(3))(2)(H(2)O)(2)1, α-Rb(4)Mo(5)O(15)(SeO(3))(2)(H(2)O)(2)2, β-Rb(4)Mo(5)O(15)(SeO(3))(2)(H(2)O)(2)3 and K(4)Mo(5)O(15)(SeO(3))(2)(H(2)O)(2)4 were synthesized by hydrothermal reactions. All of the four compounds feature a zero-dimensional (0D) [(Mo(5)O(15))(SeO(3))(2)](4-) anionic unit composed of a five-member MoO(6) octahedral ring capped by two SeO(3)(2-) trigonal pyramids, with the Rb(+)/K(+) or/and H(+) cations and water molecules acting as spacers and keeping charge balance. Although these compounds exhibit similar chemical formula, their structures are slightly different. HRb(3)(Mo(5)O(15))(SeO(3))(2)(H(2)O)(2)1 crystallizes in a polar space group (Pca2(1)). α-Rb(4)Mo(5)O(15)(SeO(3))(2)(H(2)O)(2)2 crystallizes in a centrosymmetric (CS) space group (P2(1)/n) whereas β-Rb(4)Mo(5)O(15)(SeO(3))(2)(H(2)O)(2)3 and K(4)Mo(5)O(15)(SeO(3))(2)(H(2)O)(2)4 are isomorphous, crystallize in a chiral space group (C2). The chiral structures of 3 and 4 contain two similar polyanions of [Mo(5)O(15)(SeO(3))(2)](4-) with opposite handedness. Second-harmonic-generation (SHG) measurements indicate that 1, 3 and 4 are all SHG-active. Compound 1 displays a weak SHG response of about 20% of that of KDP (KH(2)PO(4)) and is phase-matchable whereas the SHG responses of 3 and 4 are very weak (less than 5% of that of KDP). Thermal analyses and optical property measurements have also been performed.     

Synthesis, characterization, and structure-property relationships in two new polar oxides: Zn2(MoO4)(SeO3) and Zn2(MoO4)(TeO3)

Two new noncentrosymmetric (NCS) polar oxide materials, Zn(2)(MoO(4))(AO(3)) (A = Se(4+) or Te(4+)), have been synthesized by hydrothermal and solid-state techniques. Their crystal structures have been determined, and characterization of their functional properties (second-harmonic generation, piezoelectricity, and polarization) has been performed. The isostructural materials exhibit a three-dimensional network consisting of ZnO(4), ZnO(6), MoO(4), and AO(3) polyhedra that share edges and corners. Powder second-harmonic generation (SHG) measurements using 1064 nm radiation indicate the materials exhibit moderate SHG efficiencies of 100 × and 80 × α-SiO(2) for Zn(2)(MoO(4))(SeO(3)) and Zn(2)(MoO(4))(TeO(3)), respectively. Particle size vs SHG efficiency measurements indicate the materials are type 1 non-phase-matchable. Converse piezoelectric measurements resulted in d(33) values of ～14 and ～30 pm/V for Zn(2)(MoO(4))(SeO(3)) and Zn(2)(MoO(4))(TeO(3)), respectively, whereas pyroelectric measurements revealed coefficients of -0.31 and -0.64 μC/m(2) K at 55 °C for Zn(2)(MoO(4))(SeO(3)) and Zn(2)(MoO(4))(TeO(3)), respectively. Frequency-dependent polarization measurements confirmed that all of the materials are nonferroelectric; that is, the macroscopic polarization is not reversible, or "switchable". Infrared, UV-vis, thermogravimetric, and differential thermal analysis measurements were also performed. First-principles density functional theory (DFT) electronic structure calculations were also done. Crystal data: Zn(2)(MoO(4))(SeO(3)), monoclinic, space group P2(1) (No. 4), a = 5.1809(4) ?, b = 8.3238(7) ?, c = 7.1541(6) ?, β = 99.413(1)°, V = 305.2(1) ?(3), Z = 2; Zn(2)(MoO(4))(TeO(3)), monoclinic, space group P2(1) (No. 4), a = 5.178(4) ?, b = 8.409(6) ?, c = 7.241(5) ?, β = 99.351(8)°, V = 311.1(4) ?(3), Z = 2.     

New vanadium selenites: centrosymmetric Ca2(VO2)2(SeO3)3(H2O)2, Sr2(VO2)2(SeO3)3, and Ba(V2O5)(SeO3), and noncentrosymmetric and polar A4(VO2)2(SeO3)4(Se2O5) (A = Sr2+ or Pb2+)

Five new vanadium selenites, Ca(2)(VO(2))(2)(SeO(3))(3)(H(2)O)(2), Sr(2)(VO(2))(2)(SeO(3))(3), Ba(V(2)O(5))(SeO(3)), Sr(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), and Pb(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), have been synthesized and characterized. Their crystal structures were determined by single crystal X-ray diffraction. The compounds exhibit one- or two-dimensional structures consisting of corner- and edge-shared VO(4), VO(5), VO(6), and SeO(3) polyhedra. Of the reported materials, A(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)) (A = Sr(2+) or Pb(2+)) are noncentrosymmetric (NCS) and polar. Powder second-harmonic generation (SHG) measurements revealed SHG efficiencies of approximately 130 and 150 × α-SiO(2) for Sr(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)) and Pb(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), respectively. Piezoelectric charge constants of 43 and 53 pm/V, and pyroelectric coefficients of -27 and -42 μC/m(2)·K at 70 °C were obtained for Sr(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)) and Pb(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), respectively. Frequency dependent polarization measurements confirmed that the materials are not ferroelectric, that is, the observed polarization cannot be reversed. In addition, the lone-pair on the Se(4+) cation may be considered as stereo-active consistent with calculations. For all of the reported materials, infrared, UV-vis, thermogravimetric, and differential thermal analysis measurements were performed. Crystal data: Ca(2)(VO(2))(2)(SeO(3))(3)(H(2)O)(2), orthorhombic, space group Pnma (No. 62), a = 7.827(4) ?, b = 16.764(5) ?, c = 9.679(5) ?, V = 1270.1(9) ?(3), and Z = 4; Sr(2)(VO(2))(2)(SeO(3))(3), monoclinic, space group P2(1)/c (No. 12), a = 14.739(13) ?, b = 9.788(8) ?, c = 8.440(7) ?, β = 96.881(11)°, V = 1208.8(18) ?(3), and Z = 4; Ba(V(2)O(5))(SeO(3)), orthorhombic, space group Pnma (No. 62), a = 13.9287(7) ?, b = 5.3787(3) ?, c = 8.9853(5) ?, V = 673.16(6) ?(3), and Z = 4; Sr(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), orthorhombic, space group Fdd2 (No. 43), a = 25.161(3) ?, b = 12.1579(15) ?, c = 12.8592(16) ?, V = 3933.7(8) ?(3), and Z = 8; Pb(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), orthorhombic, space group Fdd2 (No. 43), a = 25.029(2) ?, b = 12.2147(10) ?, c = 13.0154(10) ?, V = 3979.1(6) ?(3), and Z = 8.     

Synthesis, Structure, and Characterization of New Li(+) - d(0) -Lone-Pair - Oxides: Noncentrosymmetric Polar Li(6)(Mo(2)O(5))(3)(SeO(3))(6) and Centrosymmetric Li(2)(MO(3))(TeO(3)) (M = Mo(6+) or W(6+))

New quaternary lithium - d(0) cation - lone-pair oxides, Li(6)(Mo(2)O(5))(3)(SeO(3))(6) (Pmn2(1)) and Li(2)(MO(3))(TeO(3)) (P2(1)/n) (M = Mo(6+) or W(6+)), have been synthesized and characterized. The former is noncentrosymmetric and polar, whereas the latter is centrosymmetric. Their crystal structures exhibit zigzag anionic layers composed of distorted MO(6) and asymmetric AO(3) (A = Se(4+) or Te(4+)) polyhedra. The anionic layers stack along a 2-fold screw axis and are separated by Li(+) cations. Powder SHG measurements on Li(6)(Mo(2)O(5))(3)(SeO(3))(6) using 1064 nm radiation reveal a SHG efficiency of approximately 170 × α-SiO(2). Particle size vs SHG efficiency measurements indicate Li(6)(Mo(2)O(5))(3)(SeO(3))(6) is type 1 nonphase-matchable. Converse piezoelectric measurements result in a d(33) value of ～28 pm/V and pyroelectric measurements reveal a pyroelectric coefficient of -0.43 μC/m(2)K at 50 °C for Li(6)(Mo(2)O(5))(3)(SeO(3))(6). Frequency-dependent polarization measurements confirm that Li(6)(Mo(2)O(5))(3)(SeO(3))(6) is nonferroelectric, i.e., the macroscopic polarization is not reversible, or 'switchable'. Infrared, UV-vis, thermogravimetric, and differential thermal analysis measurements and electron localization function calculations were also done for all materials.     

Syntheses, crystal structures and properties of new lead(II) or bismuth(III) selenites and tellurite

Four new lead(II) or bismuth(III) selenites and a tellurite, namely, Pb(3)(TeO(3))Cl(4), Pb(3)(SeO(3))(2)Br(2), Pb(2)Cd(3)(SeO(3))(4)I(2)(H(2)O), Pb(2)Ge(SeO(3))(4) and BiFe(SeO(3))(3), have been prepared and structurally characterized by single crystal X-ray diffraction (XRD) analyses. These compounds exhibit five different types of structures. The structure of Pb(3)(TeO(3))Cl(4) features a three-dimensional (3D) lead(II) chloride network with tellurite anions filling in the 1D tunnels of Pb(4) 4-member rings (MRs) along the c-axis. Pb(3)(SeO(3))(2)Br(2) contains a 3D network composed of lead(II) selenite layers interconnected by bromide anions. Pb(2)Cd(3)(SeO(3))(4)I(2)(H(2)O) is a 3D structure based on 2D cadmium(II) selenite layers which are further connected by 1D lead(II) iodide ladder chains with lattice water molecules located at the 1D tunnels of the structure. Pb(2)Ge(SeO(3))(4) features a 3D framework constructed by the alternate arrangement of lead(II) selenite layers and germanium(iv) selenite layers in the [100] direction. The structure of BiFe(SeO(3))(3) is built on the 3D anionic framework of ion(III) selenite with the bismuth(III) ions located at its Fe(6)Se(6) 12-MR tunnels. Pb(3)(TeO(3))Cl(4) (Pna2(1)) is polar and BiFe(SeO(3))(3) (P2(1)2(1)2(1)) is noncentrosymmetric. Powder second-harmonic generation (SHG) measurements using 1064 nm radiation indicate that BiFe(SeO(3))(3) exhibits a weak SHG efficiency of about 0.2 × KH(2)PO(4) (KDP). Magnetic property measurements for BiFe(SeO(3))(3) show a dominant antiferromagnetic interaction with weak spin-canting at low temperatures. IR, UV-vis and thermogravimetric, as well as electronic structure calculations were also performed.     

Synthesis, magnetic properties, and magnetic structure of a natrochalcite structural variant, KM(II)2D3O2(MoO4)2 (M = Mn, Fe, or Co)

We report the syntheses, crystal structures, and magnetic properties of KMn(2)(H(3)O(2))(MoO(4))(2) (MnH), KMn(2)(D(3)O(2))(MoO(4))(2) (MnD), KFe(2)(H(3)O(2))(MoO(4))(2) (FeH), KFe(2)(D(3)O(2))(MoO(4))(2) (FeD), KCo(2)(H(3)O(2))(MoO(4))(2) (CoH), and KCo(2)(D(3)O(2))(MoO(4))(2) (CoD), and the magnetic structures of MnD and FeD. They belong to the structural variant (space group I2/m) of the mineral natrochalcite NaCu(2)(H(3)O(2))(SO(4))(2) (space group C2/m) where the diagonal within the ac-plane of the latter become one axis of the former. The structure of MnD, obtained from Rietveld refinement of a high-resolution neutron pattern taken at 300 K, consists of chains of edge-sharing octahedra bridged by MoO(4) and D(3)O(2) to form layers, which are connected to K through the oxygen atoms to form the three-dimensional (3D)-network. The X-ray powder diffraction patterns of the other two compounds were found to belong to the same space group with similar parameters. The magnetic susceptibilities of MnH and FeH exhibit long-range ordering of the moments at a Ne?el temperature of 8 and 11 K, respectively, which are accompanied by additional strong Bragg reflections in the neutron diffraction in the ordered state, consistent with antiferromagnetism. Analyses of the neutron data for MnD and FeD reveal the presence of both long- and short-range orderings and commensurate magnetic structures with a propagation vector of (?, 0, ?). The moments are antiferromagnetically ordered within the chains with alternation between chains to generate four nonequivalent nuclear unit cells. For MnD the moments are perpendicular to the chain axis (b-axis) while for FeD they are parallel to the b-axis. The overall total is a fully compensated magnetic structure with zero moment in each case. Surprisingly, for KCo(2)(D(3)O(2))(MoO(4))(2) neither additional peaks nor increase of the nuclear peaks' intensities were observed in the neutron diffraction patterns below the magnetic anomaly at 12 K which was identified to originate from a small quantity of a ferromagnetic compound, Co(2)(OH)(2)MoO(4).     

Hydrothermal syntheses, structures, and properties of the new uranyl selenites Ag(2)(UO(2))(SeO(3))(2), M[(UO(2))(HSeO(3))(SeO(3))] (M = K, Rb, Cs, Tl), and Pb(UO(2))(SeO(3))(2)

The transition metal, alkali metal, and main group uranyl selenites, Ag(2)(UO(2))(SeO(3))(2) (1), K[(UO(2))(HSeO(3))(SeO(3))] (2), Rb[(UO(2))(HSeO(3))(SeO(3))] (3), Cs[(UO(2))(HSeO(3))(SeO(3))] (4), Tl[(UO(2))(HSeO(3))(SeO(3))] (5), and Pb(UO(2))(SeO(3))(2) (6), have been prepared from the hydrothermal reactions of AgNO(3), KCl, RbCl, CsCl, TlCl, or Pb(NO(3))(2) with UO(3) and SeO(2) at 180 degrees C for 3 d. The structures of 1-5 contain similar [(UO(2))(SeO(3))(2)](2-) sheets constructed from pentagonal bipyramidal UO(7) units that are joined by bridging SeO(3)(2-) anions. In 1, the selenite oxo ligands that are not utilized within the layers coordinate the Ag(+) cations to create a three-dimensional network structure. In 2-5, half of the selenite ligands are monoprotonated to yield a layer composition of [(UO(2))(HSeO(3))(SeO(3))](1-), and coordination of the K(+), Rb(+), Cs(+), and Tl(+) cations occurs through long ionic contacts. The structure of 6 contains a uranyl selenite layered substructure that differs substantially from those in 1-5 because the selenite anions adopt both bridging and chelating binding modes to the uranyl centers. Furthermore, the Pb(2+) cations form strong covalent bonds with these anions creating a three-dimensional framework. These cations occur as distorted square pyramidal PbO(5) units with stereochemically active lone pairs of electrons. These polyhedra align along the c-axis to create a polar structure. Second-harmonic generation (SHG) measurements revealed a response of 5x alpha-quartz for 6. The diffuse reflectance spectrum of 6 shows optical transitions at 330 and 440 nm. The trailing off of the 440 nm transition to longer wavelengths is responsible for the orange coloration of 6.     

Cation-cation interactions: crystal structures of neptunyl(V) selenate hydrates, (NpO2)2(SeO4)(H2O)n (n=1, 2, and 4)

Green crystals of (NpO(2))(2)(SeO(4))(H(2)O)(4), (NpO(2))(2)(SeO(4))(H(2)O)(2), and (NpO(2))(2)(SeO(4))(H(2)O) have been prepared by hydrothermal methods. The structures of these compounds have been characterized by single-crystal X-ray diffraction. (NpO(2))(2)(SeO(4))(H(2)O)(4), isostructural with (NpO(2))(2)(SO(4))(H(2)O)(4), is constructed from layers comprised of corner-sharing neptunyl(V) pentagonal bipyramids and selenate tetrahedra that are further linked by hydrogen bonding with water molecules. Each NpO(2)(+) cation binds to four other NpO(2)(+) units through cation-cation interactions (CCIs) to form a distorted "cationic square net" decorated by SeO(4)(2-) tetrahedra above and below the layer. Each selenate anion is bound to two neptunyl(V) cations through monodentate linkages. (NpO(2))(2)(SeO(4))(H(2)O)(2) is isostructural with the corresponding sulfate analogue as well. It consists of puckered layers of neptunyl(V) pentagonal bipyramids that are further connected by selenate tetrahedra to form a three-dimensional framework. The CCI pattern in the neptunyl layers of dihydrate is very similar to that of tetrahydrate; however, each SeO(4)(2-) tetrahedron is bound to four NpO(2)(+) cations in a mondentate manner. (NpO(2))(2)(SeO(4))(H(2)O) crystallizes in the monoclinic space group P2(1)/c, which differs from the (NpO(2))(2)(SO(4))(H(2)O) orthorhombic structure due to the slightly different connectivities between NpO(2)(+) cations and anionic ligands. The structure of (NpO(2))(2)(SeO(4))(H(2)O) adopts a three-dimensional network of distort neptunyl(V) pentagonal bipyramids decorated by selenate tetrahedra. Each NpO(2)(+) cation connects to four other NpO(2)(+) units through CCIs and also shares an equatorial coordinating oxygen atom with one of the other units in addition to the CC bond to form a dimer. Each SeO(4)(2-) tetrahedron is bound to five NpO(2)(+) cations in a monodentate manner. Magnetic measurements obtained from the powdered tetrahydrate are consistent with a ferromagnetic ordering of the neptunyl(V) spins at 8(1) K, with an average low temperature saturation moment of 1.98(8) μ(B) per Np. Well above the ordering temperature, the susceptibility follows Curie-Weiss behavior, with an average effective moment of 3.4(2) μ(B) per Np and a Weiss constant of 14(4) K. Correlations between lattice dimensionality and magnetic behavior are discussed.     

Thorium(IV)-selenate clusters containing an octanuclear Th(IV) hydroxide/oxide core

Four Th(IV) hydroxide/oxide clusters have been synthesized from aqueous solution. The structures of [Th(8)(μ(3)-O)(4)(μ(2)-OH)(8)(H(2)O)(15)(SeO(4))(8)·7.5H(2)O] (1), [Th(8)(μ(3)-O)(4)(μ(2)-OH)(8)(H(2)O)(17)(SeO(4))(8)·nH(2)O] (2), [Th(9)(μ(3)-O)(4)(μ(2)-OH)(8)(H(2)O)(21)(SeO(4))(10)] (3), and Th(9)(μ(3)-O)(4)(μ(2)-OH)(8)(H(2)O)(21)(SeO(4))(10)·nH(2)O (4) were determined using single crystal X-ray diffraction. Each structure consists of an octanuclear core, [Th(8)O(4)(OH)(8)](16+), that is built from eight Th(IV) atoms (four Th in a plane and two up and two down) linked by four "inner" μ(3)-O and eight "outer" μ(2)-OH groups. Compounds 3 and 4 additionally contain mononuclear [Th(H(2)O)(5)(SeO(4))(4)](4-) units that link the octamers into an extended structure. The octanuclear units are invariably complexed by two selenate anions that sit in two cavities formed by four planar Th(IV) and four extra-planar Th(IV) atoms, thus making [Th(8)O(4)(OH)(8)(SeO(4))(2)](12+) a common building block in 1-4. However, changes in hydration as well selenate coordination give rise to structural differences that are observed in the extended structures of 1-4. The compounds were also characterized by Raman spectroscopy. Density functional theory calculations were performed to predict the geometries, vibrational frequencies, and relative energies of different structures. Details of the calculated structures are in good agreement with experimental results, and the calculated frequencies were used to assign the experimental Raman spectra. On the basis of an analysis of the DFT results, the compound Th(8)O(8)(OH)(4)(SeO(4))(6) was predicted to be a strong gas phase acid but is reduced to a weak acid in aqueous solution. Of the species studied computationally, the dication Th(8)O(6)(OH)(6)(SeO(6))(6)(2+) is predicted to be the most stable in aqueous solution at 298 K followed by the monocation Th(8)O(7)(OH)(5)(SeO(6))(6)(+).     

Three new sodium neptunyl(V) selenate hydrates: structures, Raman spectroscopy, and magnetism

Green crystals of Na(NpO(2))(SeO(4))(H(2)O) (1), Na(3)(NpO(2))(SeO(4))(2)(H(2)O) (2), and Na(3)(NpO(2))(SeO(4))(2)(H(2)O)(2) (3) have been prepared by a hydrothermal method for 1 or evaporation from aqueous solutions for 2 and 3. The structures of these compounds have been characterized by single-crystal X-ray diffraction. Compound 1 is isostructural with Na(NpO(2))(SO(4))(H(2)O) (4). The structure of 1 consists of ribbons of neptunyl(V) pentagonal bipyramids, which are decorated and further connected by selenate tetrahedra to form a three-dimensional framework. The resulting open channels are filled by Na(+) cations and H(2)O molecules. Within the ribbon, each neptunyl polyhedron shares corners with each other solely through cation-cation interactions (CCIs). The structure of 2 adopts one-dimensional [(NpO(2))(SeO(4))(2)(H(2)O)](3-) chains connected by Na(+) cations. Each NpO(2)(+) cation is coordinated by four monodentate SeO(4)(2-) anions and one H(2)O molecule to form a pentagonal bipyramid. The structure of 3 is constructed by one-dimensional [(NpO(2))(SeO(4))(2)](3-) chains separated by Na(+) cations and H(2)O molecules. These chains have two configurations resulting in two disordered orientations of the Se(2)O(4)(2-) tetrahedra. Each NpO(2)(+) cation is coordinated by one bidentate Se(1)O(4)(2-) and three monodentate Se(2)O(4)(2-) anions to form a pentagonal bipyramid. Raman spectra of 1, 2, and 4 were collected on powder samples. For 1 and 4, the neptunyl symmetric stretch modes (670, 676, 730, and 739 cm(-1)) shift significantly toward lower frequencies compared to that in 2 (773 cm(-1)), and there are several asymmetric neptunyl stretch bands in the region of 760-820 cm(-1). Magnetic measurements obtained from crushed crystals of 1 are consistent with a ferromagnetic ordering of the neptunyl(V) spins at 6.5(2) K, with an average low temperature saturation moment of 2.2(1) μ(B) per Np. Well above the ordering temperature, the susceptibility follows Curie-Weiss behavior, with an average effective moment of 3.65(10) μ(B) per Np and a Weiss constant of 14(1) K. Correlations between lattice dimensionality and magnetic behavior are discussed.     

A novel open framework uranyl molybdate: synthesis and structure of (NH4)4[(UO2)5(MoO4)7](H2O)5

Single crystals of (NH(4))(4)[(UO(2))(5)(MoO(4))(7)](H(2)O)(5) have been synthesized hydrothermally using (NH(4))(6)Mo(7)O(24), (UO(2))(CH(3)COO)(2).2H(2)O, and H(2)O at 180 degrees C. The phase has been characterized by single-crystal X-ray diffraction using a merohedrally twinned single crystal: it is hexagonal, P6(1), a = 11.4067(5) A, c = 70.659(5) A, V = 7961.9(7) A(3), and Z = 6. The structure is based upon an open framework with composition [(UO(2))(5)(MoO(4))(7)](4-) that is composed of UO(7) pentagonal bipyramids that share vertexes with MoO(4) tetrahedra. The framework has large channels (effective pore size: 4.8 x 4.8 A(2)) parallel to the c axis and a system of smaller channels (effective pore size: 2.5 x 3.6 A(2)) parallel to [100], [110], [010], [110], [110], and [110]. The channels are occupied by NH(4)(+) cations and H(2)O molecules. The topological structure of the uranyl molybdate framework can be described either in terms of fundamental chains of UO(7) pentagonal bipyramids and MoO(4) tetrahedra or in terms of tubular building units parallel to the c axis.     

Explorations of new quaternary phases in the Ln(III)-V(V)(d0)-Se(IV)-O (Ln = Nd, Eu, Gd, Tb) systems

Systematic explorations of new phases in the Ln(III)-V(V)-Se(IV)-O systems by hydrothermal syntheses led to four new quaternary compounds, namely, Nd(2)(V(V)(2)O(4))(SeO(3))(4)·H(2)O (1), Ln(V(V)O(2))(SeO(3))(2) (Ln = Eu 2, Gd 3, Tb 4). The structure of Nd(2)(V(V)(2)O(4))(SeO(3))(4)·H(2)O features a 3D framework composed of the 2D layers of [N d(SeO(3))](+) bridged by the infinite [VO(2)(SeO(3))](-) chains with the lattice water molecules located at the 6-membered ring tunnels formed. The structure of Ln(V(V)O(2))(SeO(3))(2) (Ln = Eu, Gd, Tb) also features a 3D framework composed of 2D layers of [Ln(SeO(3))](+) bridged by the infinite [(VO(2))(SeO(3))](-) double chains. The 1D vanadium oxide selenite chain of 1 differs significantly from those in compounds 2-4 in terms of the coordination modes of the selenite groups and the connectivities between neighbouring VO(6) octahedra. Luminescent and magnetic properties of these compounds were also measured.     

Further evidence for the tetraoxoiodate(V) anion,IO(4)(3-): hydrothermal syntheses and structures of Ba[(MoO(2))(6)(IO(4))(2)O(4)] x H(2)O and Ba(3)[(MoO(2))(2)(IO(6))(2)] x 2H(2)O

The hydrothermal reaction of MoO(3) with BaH(3)IO(6) at 180 degrees C for 3 days results in the formation of Ba[(MoO(2))(6)(IO(4))(2)O(4)] x H(2)O (1). Under similar conditions, the reaction of Ba(OH)(2) x 8H(2)O with MoO(3) and Ba(IO(4))(2) x 6H(2)O yields Ba(3)[(MoO(2))(2)(IO(6))(2)] x 2H(2)O (2). The structure of 1, determined by single-crystal X-ray diffraction, consists of corner- and edge-sharing distorted MoO(6) octahedra that create two-dimensional slabs. Contained within this molybdenum oxide framework are approximately C(2v) tetraoxoiodate(V) anions, IO(4)(3-), that are involved in bonding with five Mo(VI) centers. The two equatorial oxygen atoms of the IO(4)(3-) anion chelate a single Mo(VI) center, whereas the axial atoms are mu(3)-oxo groups and complete the octahedra of four MoO(6) units. The coordination of the tetraoxoiodate(V) anion to these five highly electropositive centers is probably responsible for stabilizing the substantial anionic charge of this anion. The Ba(2+) cations separate the layers from one another and form long ionic contacts with neighboring oxygen atoms and a water molecule. Compound 2 also contains distorted MoO(6) octahedra. However, these solely edge-share with octahedral hexaoxoiodate(VII), IO(6)(5-), anions to form zigzagging one-dimensional, (1)(infinity)[(MoO(2))(IO(6))](3-), chains that are polar. These chains are separated from one another by Ba(2+) cations that are coordinated by additional water molecules. Bond valence sums for the iodine atoms in 1 and 2 are 5.01 and 7.03, respectively. Crystallographic data: 1, monoclinic, space group C2/c, a = 13.584(1) A, b = 7.3977(7) A, c = 20.736(2) A, beta = 108.244(2) degrees, Z = 4; 2, orthorhombic, space group Fdd2, a = 13.356(7) A, b = 45.54(2) A, c = 4.867(3) A, Z = 8.     

Syntheses, topological analyses, and NLO-active properties of new Cd(II)/M(II) (M = Ca, Sr) metal-organic frameworks based on R-isophthalic acids (R = H, OH, and t-Bu)

Solvothermal syntheses of Cd(NO(3))(2)·4H(2)O and R-isophthalic acids (R = H, OH and t-Bu) in the presence of Ca(II) or Sr(II) lead to four new three-dimensional Cd(II)/Ca(II) or Cd(II)/Sr(II) heterometallic frameworks: [CdCa(m-BDC)(2)(DMF)(2)] (1), [CdSr(2)(m-BDC)(2)(NO(3))(2)(DMF)(4)] (2), [CdCa(OH-m-BDC)(2)(H(2)O)(2)]·2Me(2)NH (3), and (Me(2)NH(2))(2)[Cd(2)Ca(Bu(t)-m-BDC)(4)] (4) (m-H(2)BDC = isophthalate, OH-m-H(2)BDC = 5-hydroxyisophthalate and Bu(t)-m-H(2)BDC = 5-butylisophthalate). All of these compounds except for 4 crystallize in acentric (or chiral) space groups and the bulk materials for 1 and 3 display strong powder SHG efficiencies, approximately 1.54 and 2.31 times than that of a potassium dihydrogen phosphate (KDP) powder. Topological analyses show that 1 and 2 have structures with sxb and dia topologies, respectively, while both 3 and 4 exhibit pcu topological nets when the metal carboxylate clusters are viewed as nodes. The fluorescence properties and thermal stabilities for these compounds are also investigated.     

Crystal and magnetic structures and magnetic properties of selenate containing natrochalcite, A(I)M(II)2(H3O2)(SeO4)2 where A = Na or K and M = Mn, Co, or Ni

The synthesis of a series of selenate containing natrochalcite, A(I)M(II)(2)(H(3)O(2))(SeO(4))(2) where A = Na or K and M = Mn, Co, or Ni (here labeled as AMH and AMD for the hydrogenated and deuterated compounds, respectively), the X-ray crystal structure determinations from single crystals (Ni) and powder (Mn), magnetic properties, and magnetic structures of the cobalt analogues are reported. The nuclear crystal structures for NaNiH, KNiH, and KMnH are similar to those reported for the cobalt analogues (NaCoH and KCoH) and consist of chains of edge-sharing octahedra (MO(6)) which are connected by H(3)O(2) and SeO(4) to form layers which are in turn bridged by the alkali, in an octahedral coordination site, to form the 3D-framework. The magnetic properties are characterized by antiferromagnetic interaction at high temperatures and antiferromagnetic ordering at low temperatures (NaCoH, 3.5 K; KCoH, 5.9 K; KNiH, 8.5 K; and KMnH, 16 K), except for KNi(2)(H(3)O(2))(SeO(4))(2) which displays a weak ferromagnetic interaction and no long-range ordering above 2 K. The neutron magnetic structures of the cobalt analogues, studied as a function of temperature, are different for the two cobalt salts and also different from all the known magnetic structures of the natrochalcite family. Whereas the magnetic structure of NaCoD has a k = (0, 0, 0), that of KCoD has one consisting of a doubled nuclear cell, k = (0, 0, 1/2). Both compounds have four magnetic sublattices related to the four cobalt atoms of the nuclear unit cell. In NaCoD the moments are in the bc-plane, M(y) = 2.51(2) μ(B) and M(z) = 1.29(4) μ(B), with the major component along the cobalt chain and the resultant moment, 2.83(3) μ(B), making an angle of 27° with the b-axis. The sum of the moments within the cell is zero. For KCoD the moment at each cobalt site has a component along each crystallographic axis, M(x) = 2.40(3), M(y) = 1.03(3), M(z) = 1.59(8) giving a total M = 2.49(3) μ(B). Within one nuclear cell the moments are fully compensated. The moments corresponding to the cobalt atoms of the second nuclear cell comprising the magnetic unit cell are oriented in opposite directions.     

Sulfates of the refractory metals: crystal structure and thermal behavior of Nb2O2(SO4)3, MoO2(SO4), WO(SO4)2, and two modifications of Re2O5(SO4)2

The sulfates Nb(2)O(2)(SO(4))(3), MoO(2)(SO(4)), WO(SO(4))(2,) and two modifications of Re(2)O(5)(SO(4))(2) have been synthesized by the solvothermal reaction of NbCl(5), WOCl(4), Re(2)O(7)(H(2)O)(2), and MoO(3) with sulfuric acid/SO(3) mixtures at temperatures between 200 and 300 °C. Besides the X-ray crystal structure determination of all compounds, the thermal behavior was investigated using thermogravimetric studies. WO(SO(4))(2) (monoclinic, P2(1)/n, a = 7.453(1) ?, b = 11.8232(8) ?, c = 7.881(1) ?, β = 107.92(2)°, V = 660.7(1) ?(3), Z = 4) and both modifications of Re(2)O(5)(SO(4))(2) (I: orthorhombic, Pba2, a = 9.649(1) ?, b = 8.4260(8) ?, c = 5.9075(7) ?, V = 480.27(9) ?(3), Z = 2; II: orthorhombic, Pbcm, a = 7.1544(3) ?, b = 7.1619(3) ?, c = 16.8551(7) ?, V = 863.64(6) ?(3), Z = 4) are the first structurally characterized examples of tungsten and rhenium oxide sulfates. Their crystal structure contains layers of sulfate connected [W═O] moieties or [Re(2)O(5)] units, respectively. The cohesion between layers is realized through weak M-O contacts (343-380 pm). Nb(2)O(2)(SO(4))(3) (orthorhombic, Pna2(1), a = 9.9589(7) ?, b = 11.7983(7) ?, c = 8.6065(5) ?, V = 1011.3(1) ?(3), Z = 4) represents a new sulfate-richer niobium oxide sulfate. The crystal structure contains a three-dimensional network of sulfate connected [Nb═O] moieties. In MoO(2)(SO(4)) (monoclinic, I2/a, a = 8.5922(6) ?, b = 12.2951(6) ?, c = 25.671(2) ?, β = 94.567(9)°, V = 2703.4(3) ?(3), Z = 24) [MoO(2)] units are connected through sulfate ions to a three-dimensional network, which is pervaded by channels along [100] accommodating the terminal oxide ligands. In all compounds except WO(SO(4))(2), the metal ions are octahedrally coordinated by monodentate sulfate ions and oxide ligands forming short M═O bonds. In WO(SO(4))(2), the oxide ligand and two monodentate and two bidentate sulfate ions build a pentagonal bipyramid around W. The thermal stability of the sulfates decreases in the order Nb > Mo > W > Re; the residues formed during the decomposition are the corresponding oxides.     

Methanesulfonates of high-valent metals: syntheses and structural features of MoO2(CH3SO3)2, UO2(CH3SO3)2, ReO3(CH3SO3), VO(CH3SO3)2, and V2O3(CH3SO3)4 and their thermal decomposition under N2 and O2 atmosphere

Oxide methanesulfonates of Mo, U, Re, and V have been prepared by reaction of MoO(3), UO(2)(CH(3)COO)(2)·2H(2)O, Re(2)O(7)(H(2)O)(2), and V(2)O(5) with CH(3)SO(3)H or mixtures thereof with its anhydride. These compounds are the first examples of solvent-free oxide methanesulfonates of these elements. MoO(2)(CH(3)SO(3))(2) (Pbca, a=1487.05(4), b=752.55(2), c=1549.61(5) pm, V=1.73414(9) nm(3), Z=8) contains [MoO(2)] moieties connected by [CH(3)SO(3)] ions to form layers parallel to (100). UO(2)(CH(3)SO(3))(2) (P2(1)/c, a=1320.4(1), b=1014.41(6), c=1533.7(1) pm, β=112.80(1)°, V=1.8937(3) nm(3), Z=8) consists of linear UO(2)(2+) ions coordinated by five [CH(3)SO(3)] ions, forming a layer structure. VO(CH(3)SO(3))(2) (P2(1)/c, a=1136.5(1), b=869.87(7), c=915.5(1) pm, β=113.66(1)°, V=0.8290(2) nm(3), Z=4) contains [VO] units connected by methanesulfonate anions to form corrugated layers parallel to (100). In ReO(3)(CH(3)SO(3)) (P1, a=574.0(1), b=1279.6(3), c=1641.9(3) pm, α=102.08(2), β=96.11(2), γ=99.04(2)°, V=1.1523(4) nm(3), Z=8) a chain structure exhibiting infinite O-[ReO(2)]-O-[ReO(2)]-O chains is formed. Each [ReO(2)]-O-[ReO(2)] unit is coordinated by two bidentate [CH(3)SO(3)] ions. V(2)O(3)(CH(3)SO(3))(4) (I2/a, a=1645.2(3), b=583.1(1), c=1670.2(3) pm, β=102.58(3), V=1.5637(5) pm(3), Z=4) adopts a chain structure, too, but contains discrete [VO]-O-[VO] moieties, each coordinated by two bidentate [CH(3)SO(3)] ligands. Additional methanesulfonate ions connect the [V(2)O(3)] groups along [001]. Thermal decomposition of the compounds was monitored under N(2) and O(2) atmosphere by thermogravimetric/differential thermal analysis and XRD measurements. Under N(2) the decomposition proceeds with reduction of the metal leading to the oxides MoO(2), U(3)O(7), V(4)O(7), and VO(2); for MoO(2)(CH(3)SO(3))(2), a small amount of MoS(2) is formed. If the thermal decomposition is carried out in a atmosphere of O(2) the oxides MoO(3) and V(2)O(5) are formed.     

Two new neptunyl(V) selenites: a novel cation-cation interaction framework in (NpO2)3(OH)(SeO3)(H2O)2 3H2O and a uranophane-type sheet in Na(NpO2)(SeO3)(H2O)

Dark green crystals of (NpO(2))(3)(OH)(SeO(3))(H(2)O)(2)·H(2)O (1) have been prepared by a hydrothermal reaction of neptunyl(V) and Na(2)SeO(4) in an aqueous solution at 150 °C, while green plates of Na(NpO(2))(SeO(3))(H(2)O) (2) have been synthesized by evaporation of a solution of neptunyl(V), H(2)SeO(4), and NaOH at room temperature. Both compounds have been characterized by single-crystal X-ray diffraction. The structure of compound contains three crystallographically unique Np atoms that are bonded to two O atoms to form a nearly linear O═Np═O NpO(2)(+) cation. Neighboring Np(5+) ions connect to each other through a bridging oxo ion from the neptunyl unit, a configuration known as cation-cation interactions (CCIs), to build a complex three-dimensional network. More specifically, each Np(1)O(2)(+), Np(2)O(2)(+), and Np(3)O(2)(+) cation is involved in three, five, and four CCIs with other units, respectively. The framework of neptunyl(V) pentagonal bipyramids is decorated by selenite trigonal pyramids with one-dimensional open channels where uncoordinated waters are trapped via hydrogen bonding interactions. Compound adopts uranophane-type [(NpO(2))(SeO(3))](-) layers, which are separated by Na(+) cations and water molecules. Within each layer, neptunyl(V) pentagonal bipyramids share equatorial edges with each other to form a single chain that is further connected by both monodentate and bidentate selenite trigonal pyramids. Crystallographic data: compound, monoclinic, P2(1)/c, Z = 4, a = 6.6363(8) ?, b = 15.440(2) ?, c = 11.583(1) ?, β = 103.549(1)°, V = 1153.8(2) ?(3), R(F) = 0.0387 for I > 2σ(I); compound (2), monoclinic, C2/m, Z = 4, a = 14.874(4) ?, b = 7.271(2) ?, c = 6.758(2) ?, β = 112.005(4)°, V = 677.7(3) ?(3), R(F) = 0.0477 for I > 2σ(I).     

Syntheses, crystal structures, magnetic and luminescent properties of two classes of molybdenum(VI) rich quaternary lanthanide selenites

Hydrothermal reactions of lanthanide(III) oxide, molybdenum oxide, and SeO(2) at 230 °C lead to five new molybdenum-rich quaternary lanthanide selenites with two types of structures, namely, H(3)Ln(4)Mo(9.5)O(32)(SeO(3))(4)(H(2)O)(2) (Ln = La, 1; Nd, 2) and Ln(2)Mo(3)O(10)(SeO(3))(2)(H(2)O) (Ln = Eu, 3; Dy, 4; Er, 5). Compounds 1 and 2 feature a complicated three-dimensional (3D) architecture constructed by the intergrowth of infinite molybdenum selenite chains of [Mo(4.75)SeO(19)](5.5-) and one-dimensional (1D) lanthanide selenite chains. The structures of 3, 4, and 5 exhibit 3D network composed of 1D [Mo(3)SeO(13)](4-) anionic chains connected by lanthanide selenite chains. The molybdenum selenite chain of [Mo(4.75)SeO(19)](5.5-) in 1 and 2 is composed of a pair of [Mo(3)SeO(13)](4-) chains as in 3, 4, and 5 interconnected by a [Mo(1.75)O(8)](5.5-) double-strand polymer via corner-sharing. The lanthanide selenite chains in both structures are similar in terms of coordination modes of selenite groups as well as the coordination environments of lanthanide(III) ions. Luminescent studies at both room temperature and 10 K indicate that compound 2 displays strong luminescence in the near-IR region and compound 3 exhibits red fluorescent emission bands with a luminescent lifetime of 0.57 ms. Magnetic properties of these compounds have been also investigated.