Tris(2,2''''-bipyridyl)ruthenium(Ⅱ) electrochemiluminescence (ECL) enhanced by rutin on platinum electrode

Ru(bpy)_(3~(2 )) electrochemiluminescence (ECL) was applied to determination of rutin. ECL intensity of Ru(bpy)_(3~(2 ))could be enhanced in the presence of rutin in basic solution on platinum electrode. At pH 9.9, light emission intensity was found to be linear with rutin in the range of 1-50 mmol/L.     

Tris（2,2＇-bipyridyl）ruthenium（Ⅱ） electrochemiluminescence （ECL） enhanced by rutin on platinum electrode

Ru（bpy）3^2＋ electrochemiluminescence （ECL） was applied to determination of rutin. ECL intensity of Ru（bpy）3^2＋ could be enhanced in the presence of rufin in basic solution on platinum electrode. At pH 9.9, light emission intensity was found to be linear with rutin in the range of 1-50μmol/L.     

Determination of Amino Acids by Ru(bpy)_3~(2+) Cathodic Electrochemiluminescence with High Sensitivity

The unique cathodic electrochemiluminescence(ECL) emission of Ru(bpy)32+(bpy=2,2′-bipyridine) was observed via Nafion film at Au electrode[Au/Nafion/Ru(bpy)32+] at about 0.20 V(vs. Ag/AgCl) and applied to the determination of several amino acids without prior derivatization with high sensitivity. The cathodic electrochemilumi-nescence(ECL) exhibits the detection limits and linear ranges of several amino acids comparable to or better than those of capillary electrophoresis with conventional ECL detection method(at 1.10—1.20 V vs. Ag/AgCl) based on precolumn derivatization. The results suggest that the cathodic ECL is promising for the detection of amino acids in bioanalysis.     

Determination of Protein via Resonance Light Scattering Technique with （NH4）2SO4

Be able to form large particles with protein via electrostatic force to enhance the intensity of resonance light scattering(RLS),(NH4)2SO4 was used as a RLS probe to determine bovine serum albumin(BSA),human serum albumin(HSA) and ovum albumin(OVA).The experimental conditions were investigated,including the acidity and saturation degree of (NH4)2SO4.Under the optimum conditions,the enhanced RLS intensity is proportional to the concentration of BSA,HSA and OVA in the ranges of 5×10-8―1×10-6,2.5×10-8―8×10-7 and 5×10-8―1.5×10-6 mol/L,respectively.The detection limits for BSA,HAS and OVA are 6.6×10-9,3.8×10-9 and 7.4×10-9 mol/L,respectively.The effects of foreign substances were also examined.The practical and synthetic samples were analyzed with satisfactory results.     

Application of the Ru(bipy)2(dpp)2+ / C2O4 2− electrochemiluminescence reaction to the determination of phenol

The electrochemiluminescence (ECL) of the ruthenium di(2,2′-bipyridine)- (4,7-diphenyl-1,10-phenanthroline) complex (Ru-bipy-dpp) produced on a glassy carbon electrode was studied by cyclic voltammetry. The anodic oxidation of Ru-bipy-dpp produces ECL in the presence of oxalate in oxygen-free aqueous solutions. Threefold ECL efficiencies were obtained for Ru-bipy-dpp relative to Ru(bipy)₃ as a standard. The ECL of Ru-bipy-dpp is quenched by both oxygen and phenol. The luminescence intensity was proportional to the concentration of phenol in the range of 5–100 μM. At a phenol concentration of 100 μM, the ECL of Ru-bipy-dpp peaking at 597 nm was completely quenched. Correspondence: Dan Xiao, College of Chemistry and Chemical Engineering, Sichuan University, Chengdu 610065, P.R. China     

氮掺杂石墨烯量子点/Ru(bpy)_3~(2+)体系电致化学发光法检测邻苯二酚

采用简单的方法合成了氮掺杂石墨烯量子点(NG QDs),并分别用荧光光谱仪和透射电子显微镜进行了表征。研究了NG QDs对Ru(bpy)_3~(2+)电致化学发光(ECL)体系的增敏作用。实验优化了体系pH、Ru(bpy)_3~(2+)用量、NG QDs用量以及扫速等条件。在最优条件下,根据邻苯二酚对NG QDs/Ru(bpy)_3~(2+)耦合ECL体系信号的猝灭作用,建立了测定邻苯二酚的新方法。邻苯二酚浓度(1.0×10~(-8)～1.0×10~(-5) mol/L)的对数值与ECL信号强度差之间呈线性关系,检测限低至5.0×10~(-9) mol/L,而且选择性和重现性好,实际样品检测结果令人满意。     

Thiocyanate ion selective electrode based on bis(N-3-methylphenyl salicylidenaminato)copper(Ⅱ) ionophore

In this work a PVC membrane electrode based on bis(N-3-methyl phenyl salicylidenaminato)copper(II)as ionophore was prepared.The electrode was tested by inorganic anions and showed good selectivity for thiocyanate ion.This sensor showed Nerstian behavior with a slope of a-59.3 mV per decade at 25℃.The proposed electrode exhibited a wide linear range from 1.0 × 10~(-6) mol/L to 1.0× 10~(-1) mol/L with a detection limit of 5.0×10~(-7) mol/L.The electrode response was independent of pH in the range of 4.0-10.0.The response time is about 9-21s,and the electrode can be used for over 60 days without considerable deterioration.The prepared sensor was applied as an indicator electrode in potentiometric titration of SCN with Ag~+ ion and to determine the thiocyanate in samples of urine and saliva.     

Cascaded strand displacement for non-enzymatic target recycling amplification electrochemical detection of SARS-CoV-2EI北大核心CSCD

An electrochemical biosensor for low cost and highly sensitive and selective detection of SARS-CoV-2 target nucleic acid was developed based on two cascaded toehold-mediated strand displacement reactions (TSDRs). Driven by thermodynamic entropy, the target nucleic acid bound to the first toehold region of the probes, leading to the first TSDR and the second toehold region exposed. Subsequently, the methylene blue (MB)-modified signal probe triggered the second TSDR and led to cyclic reuse of the target nucleic acid. Based on cascaded TSDRs, a large number of signal probes were combined on the sensor surface to produce significantly enhanced square wave voltammetry (SWV)electrochemical signals. The results showed that the SWV signal intensity was proportional to the logarithm of the target nucleic acid concentration, and had a good linear relationship in the range of 5×10-14-5×10-10 mol/L with a detection limit of 1.8×10-14 mol/L. Moreover, the sensor could be employed to monitor SARS-CoV-2 nucleic acid in 10% serum samples. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

Gold Nanoclusters Templated by Poly-cytosine DNA as Fluorescent Probes for Selective and Sensitive Detection of Thiocyanate

Gold nanoclusters(AuNCs) were prepared in the presence of the nucleobases of poly-cytosine DNAs in this paper. We have demonstrated tliat the fluorescence of the AuNCs is quenched by thiocyanate(SCN^-) through the interaction between SCN^- and gold atoms. AuNCs can receive energy from nucleobases to boost their emission intensity, while in the presence of SCN^-, they coordinate with Au atoms and influence the energy transfer between the nucleobases and AuNCs, leading to the fluorescence quenching. The decreased fluorescence intensity was in proportion to the concentration of SCN^- in the range of 8.0×10^-7-1.5×10^-5 mol/L with a limit of detection of 4.2×10^-7 mol/L(3σ). We further validated the practice of this probe througli the detection of SCbT in natural water samples.     

A novel method for Co(Ⅱ) and Cu(Ⅱ) analysis by capillary electrophoresis with chemiluminescence detection

Based on the fact that some metal ions can catalyze the chemiluminescence(CL)reaction of luminol with K_3Fe(CN)_6,a novel capillary electrophoresis CL method was developed for the determination of Co(Ⅱ)and Cu(Ⅱ).The separation was carried out with a 10 mmol/L sodium acetate solution containing 0.8 mmol/L luminol and 2.0 mmol/Lα-HIBA(adjusted to pH 4.8 by HAc solution).The post-capillary reagent was 2.0 mmol/L K_3Fe(CN)_6 which was adjusted to pH 13.0 by NaOH solution.Under the optimum conditions,the detection limits(S/N=3)for Co(Ⅱ)and Cu(Ⅱ)were 7.5×10~(-11)mol/L and 7.5×10~(-9)mol/L,with the linear range of 7.5×10~(-9)mol/L to 1.0×10~(-6)mol/L and 7.5×10~(-8)mol/L to 5.0×10~(-5)mol/L, respectively.     

Ultrasensitive label-free electrochemiluminescence immunosensor based on N-(4-aminobutyl)-N-ethylisoluminol-functionalized graphene composite

The electrochemiluminescence(ECL) behavior of N-(4-aminobutyl)-N-ethylisoluminol(ABEI)-functionalized graphene composite(ABEI-GC) modified on an indium tin oxide(ITO) electrode was studied. ABEI-GC exhibited excellent ECL activity. On this basis, a label-free ECL immunosensor was developed for the sensitive detection of human immunoglobulin G(h Ig G) by using ABEI-GC as the ECL nano-interface via a layer-by-layer assembly technique. ABEI-GC was first assembled onto an ITO electrode. Positively charged chitosan was then electrostatically adsorbed to the modified electrode. Finally, negatively charged antibody-coated gold nanoparticles were attached to the surface to form the ECL immunosensor. In the presence of h Ig G, h Ig G was captured by its antibody. In addition, an ECL signal was detected in the presence of H2O2 when a double potential was applied. The ECL immunosensor for the determination of h Ig G showed a linear range of 1.0×10-13–1.0×10-8 g/mL with a detection limit of 5.0×10-14 g/m L. This immunosensor has high sensitivity, wide linearity and good reproducibility. The superior sensitivity of the proposed ECL immunoassay mainly derives from the incorporation of ABEI-GC, which not only improves the ECL intensity, response speed, and stability, but also provides a large specific surface for high levels of protein loading. This work reveals that ABEI-GC is good nano-interface for the construction of ECL biosensors. Our strategy is promising for protein detection and may open up a new avenue for ultrasensitive label-free immunoassays.     

Chromatographic separation of cerium(Ⅲ) in L-valine medium using poly[dibenzo-18-crown-6]

A column chromatographic method has been developed for the separation and determination of cerium(Ⅲ) using poly[dibenzo-18-crown-6]. The separation was carried out in L-valine medium. The adsorption of cerium(Ⅲ) was quantitative from 1×10-1 to 1×10-4 mol/L L-valine. Amongst the various eluents, 1.0-8.0 mol/L hydrochloric acid, 1.0-8.0 mol/L hydrobromic acid, 1.0-8.0 mol/L perchloric acid, 1.0-2.0 mol/L sulfuric acid and 4.0-5.0 mol/L acetic acid, were found to be the efficient eluents for cerium(Ⅲ). The capacity of poly[dibenzo-18-crown-6] for cerium(Ⅲ) was (0.428±0.01) mmol/g. The method was applied to the separation of cerium(Ⅲ) from associated elements link uranium(Ⅵ) and thorium(Ⅳ). It was also applied for the determination of cerium(Ⅲ) in geological samples. The method is simple, rapid and selective with good reproducibility (approximately±2% ).     

Determination of Trace Silver( Ⅰ ) in Basic Aqueous Solution by Electrochemiluminescence of a New Reagent 6-(2-Hydroxy-4-Diethylaminophenylazo)-2,3-Dihydro-1,4-Phthalazine-1,4-Dione

The electrochemiluminescence (ECL) of a new reagent 6- (2-hydroxy- 4 diethy laminophenylazo)-2,3-dihydro-1 ,4-phthalazine-1,4-dione (HDEA) in a basic aqueous so lution was studied by using the apparatus designed by ourselves. Trace amounts of silver ( Ⅰ ) shows a significant effect on the efficiency of light emission of HDEA during a positive trigonometrical wave pulse was exerted on the solution. The linear relationship between the light intensity and the concentration of silver( Ⅰ ) occurs in the range of 5. 0×10-8 to 3. 0×10-8 mol/L Ag(Ⅰ ) in a medium of KOH-KCl-HDEA (pH= 12. 8). The detection limit of the method is 2. 0×10-8 mol/LAg( Ⅰ ), and the r. s. d. for 1.0×10-7 mo)/L Ag ( Ⅰ ) is 5%. Of 21 metal ions concerned, only nickel( Ⅱ ), cerium( Ⅳ ) and cobalt( Ⅱ ) interfere the silver detection seriously; Ⅰ and Br also have some interference.     

STUDY OF THE FLUORESCENCE ENHANCEMENT IN THE SYSTEM OF EUROPIUM-OR SAMAR-IUM-TERBIUM-DIBENZOYLMETHANE-CETYLTRIMETHYLAMMONIUM BROMIDE-TRITON X-100 AND ITS APPLICATION

A fluorescence enhancement phenomenon on adding terbium to the Eu or Sm-DBM-CTMAB-Triton X-100 fluorescence system was observed. The fluorescence intensity of this system was 50 times greater than that of the system without terbium at pH 9.0. The fluorescence intensity is a linear function of the concentration of europium or samarium in the range of 1.0×10~(-10)-8.0×10~(-6) mol/L and 1.0×10~(-7)-8.0×10~(-6) mol/L, respectively. The deteetion limits for them were 1.0×10~(-12) mol/L and 1.0×10~(-9) mol/L, respectively. This system was used for the determination of europium or samarium in rare earth samples with satisfactory results.     

A fluorescent aptasensing strategy for adenosine triphosphate detection using tris(bipyridine)ruthenium(Ⅱ) complex containing six cyclodextrin units

A sensitive label-free fluorescent aptasensing strategy for the detection of adenosine triphosphate(ATP)has been developed with a metallocyclodextrin, tris(bipyridine)ruthenium(Ⅱ) complex containing six cyclodextrin units(6CD-Ru), which exhibited much stronger emission signal compared to the parent compound Ru(bpy)_3Cl_2. Furthermore, the emission spectrum showed that the ATP-aptamer(ss DNA)could increase the fluorescence intensity of 6CD-Ru dramatically, attributed to the interaction between aptamer and cyclodextrin, which could provide protection to the ruthenium core from the quenching of emission by oxygen in the solution. With the addition of ATP, the interaction between aptamer and cyclodextrins on 6CD-Ru was diminished, since the ATP/aptamer complex had the priority to be formed,leading to the corresponding reduction of fluorescence intensity, which could be utilized to detect ATP quantitatively. A linear relationship was displayed between the fluorescence and the logarithm of ATP concentrations in the range from 1 nmol/L to 1μmmol/L with the detection limit of 0.5 nmol/L(S/N = 3).The proposed fluorescent aptasensing strategy exhibited high sensitivity and specificity, without any labeling or amplification procedures, and it could also be applied for the detection of many other aptamer-specific targets.     

Allele-specific amplification and electrochemiluminescence method for single nucleotide polymorphism analysis

A new approach combined the specificity of allele-specific amplification (ASA) with the sensitivity of electrochemilu- minescence (ECL) assay for single nucleotide polymorphism (SNP) analysis was proposed. Briefly, target gene was amplified by a biotin-labeled allele-specific forward primer and a Ru(bpy)32 (TBR)-labeled universal reverse primer. Then, the amplicon was captured onto streptavidin-coated paramagnetic beads through biotin label, and detected by measuring the ECL signal of TBR label. Different genotypes were distinguished according to the ECL values of the amplicons by different genotypic primers. K-ras oncogene was used as a target to validate the feasibility of the method. The experiment results show that the different genotypes can be clearly distinguished by ASA–ECL assay. The method is useful in SNP analysis due to its sensitivity, safety, and simplicity.     

Preparation and Spectroscopic Properties of Tris(2,2′-bipyridine)ruthenium(Ⅱ) Loaded in Siliceous Mesoporous MCM-41

[Ru(bpy)3]2+/MCM-41 composite material obtained by loading tris(2,2′-bipyridine)ruthenium(Ⅱ)([Ru(bpy)3]2+) in siliceous mesoporous MCM-41 was characterized by X-ray powder diffraction, UV-Vis absorption and emission spectroscopies. The absorption spectrum of [Ru(bpy)3]2+/MCM-41 is similar to that of [Ru(bpy)3]2+ aqueous solution, whereas its emission spectrum exhibits hypsochromic shift compared to the solution spectrum. On the other hand, the peak position of the emission spectrum of [Ru(bpy)3]2+/MCM-41 shifts towards longer wavelength when the loading amount increases.     

ClO3--SO32--Rh6G-SDBS体系的化学发光及其用于亚硫酸根测定

Based on the micelle synergism mechanism, a chemiluminescence （CL） flow system for the determination of sulfite was described. The CL signal generated from the reaction of chlorate with sulfite in acidic solution was very weak, while the interfusion of sodium dodecylbenzenesulfonate （SDBS） resulted in a highly chemiluminescent intensity. The major goal of this work was to investigate and develop the SDBS rnicelle synergetic CL system. The mechanism was proposed and proved by spectrometry. The results indicated that the unique structure of SDBS micelles prorooted the aggregation of rhodamine 6G （Rh6G） and a much easier energy transfer, leading to a marked shift to red in the CL emission. This CL system was developed for the determination of sulfite and the concentration of sulfite was proportional to the CL intensity in the range of 5.0× 10^-8--1.0× 10^-5 mol/L with the detection limit of 1.7×10^-8 mol/L （S/N=3）. The relative standard deviation was 3.3% for 1.0×10^ 6 mol/L sulfite solution with eleven repeated measurements. This method was successfully applied to the determination of sulfite in powder sugar.     

Study on the inclusion interactions of berberine hydrochloride and cucurbit[7] by spectrofluorimetry

The inclusion interaction between berberine hydrochloride(BRH) and cucurbit[7](CB[7]) has been studied by spectro-fluorimetry. The result showed that CB[7]interaction with BRH to form a stable inclusion complex with an association constant of 9.57×10~4 L/mol and the fluorescence intensity of the complex was enhanced in 17 times higher than that of the studied drug itself. Based on the significant enhancement of fluorescence intensity of B RH in inclusion complex,a spetrofluorimetric method with high sens...     

基于Ru(bpy)■-三乙胺体系的电致化学发光生物传感器检测葡萄糖

联吡啶钌(Ru(bpy)■)拥有优良的电致化学发光(ECL)性能,但其较好的水溶性使其固载面临巨大问题。该文制备了Pt纳米粒子与Ru(bpy)■的复合物(Pt NPs-Ru),将其修饰于电极并进一步固载葡萄糖氧化酶(GOx)制得传感器。基于H_2O_2对Ru(bpy)■-三乙胺体系ECL信号的猝灭作用,随着葡萄糖浓度的增加,其在GOx的催化下原位产生的H_2O_2量增多,导致ECL信号逐渐减弱,从而实现葡萄糖的检测。ECL强度与葡萄糖浓度的对数在1.0×10~(-8)～5.0×10~(-5) mol/L范围内呈良好的线性关系,检出限低至5.2×10~(-9) mol/L。传感器具有好的稳定性和高的选择性。Pt NPs-Ru复合物为ECL传感器的构建提供了良好平台,为葡萄糖检测提供了新方法。