Photophysical properties of ruthenium(II) tris(2,2'-bipyridine) complexes bearing conjugated thiophene appendages

A small series of ruthenium(II) tris(2,2'-bipyridine) complexes has been synthesized in which ethynylated thiophene residues are attached to one of the 2,2'-bipyridine ligands. The photophysical properties depend on the conjugation length of the thiophene-based ligand, and in each case, dual emission is observed. The two emitting states reside in thermal equilibrium at ambient temperature and can be resolved by emission spectral curve-fitting routines. This allows the properties of the two states to be evaluated in both fluid butyronitrile solution and a transparent KBr disk. It is concluded that both emitting states are of metal-to-ligand charge-transfer (MLCT) character, and despite the presence of conjugated thiophene residues, there is no indication for a low-lying pi,pi*-triplet state that promotes nonradiative decay of the excited-state manifold. A key feature of these systems is that the conjugation length imposed by the thiophene-based ligand helps to control the rate constants for both radiative and nonradiative decay from the two MLCT triplet states.     

Thin-film solid-state electroluminescent devices based on tris(2,2'-bipyridine)ruthenium(II) complexes

The behavior of light-emitting electrochemical cells (LEC) based on solid films ( approximately 100 nm) of tris(2,2'-bipyridine)ruthenium(II) between an ITO anode and a Ga-In cathode was investigated. The response times were strongly influenced by the nature of the counterion: small anions (BF(4)(-) and ClO(4)(-)) led to relatively fast transients, while large anions (PF(6)(-), AsF(6)(-)) produced a slow time-response. From comparative experiments of cells prepared and tested in a glovebox to those in ambient, mobility of the anions in these films appears to be related to the presence of traces of water from atmospheric moisture. An electrochemical model is proposed to describe the behavior of these LECs. The simulation results agreed well with experimental transients of current and light emission as a function of time and show that the charge injection is asymmetric at the two electrodes. At a small bias, electrons are the major carriers, while for a larger bias the conduction becomes bipolar.     

Luminescent properties of tris(2,2'-bipyridine)ruthenium(II) in sol-gel-processed dip-coated thin films

The luminescence decay and spectral behavior of ruthenium(II)-tris-1,2-bipyridine dichloride dissolved in different organically modified silicate gel matrixes were investigated. Dip-coated thin films were synthesized from tetraethoxysilane (TEOS), methyltriethoxysilane (MTEOS), ethyltriethoxysilane (ETEOS), and methyl- trimethoxysilane (MTMOS). A blue shift in the ruthenium complex emission spectrum with respect to the aqueous solution was observed for all the films on the sol to gel conversion. This spectral shift was slightly dependent on the precursor used to obtain the films and independent of the reaction pH to prepare the "sol". In the data treatment of the time-resolved luminescence measurements, it was assumed that the distribution of the luminophore in the films was nonhomogeneous. The analysis of the luminescence decay profiles was based on a multisite model. All decay curves are best described by a double-exponential model. The parameters of the decay components depended principally on the thermal treatment used in the processing of the films. The lifetimes decreased and the emission espectra showed a red shift with the increase in the drying temperature. A luminescence quenching of the ruthenium complex in the films by dissolved oxygen in aqueous solution was also observed. The quenching rate constant obtained from the preexponential amplitude-weighted mean lifetimes (tau(M)) was in the order of 10(9) M(-1) s(-1). When a phenolic derivative was used as quencher the process rate was greatly reduced compared to the quenching in water. It would seem that the metallic complex sequestered within the film is placed either into a higher microviscosity microenvironment or in a location which the phenolic quencher cannot access. In both cases, the quenching plot based on tau(o)(M)/tau(M) could be fitted satisfactorily by a sum of two terms of Stern-Volmer. This fact is indicative of the matrix microheterogeneity for the films and is fully consistent with the biexponential nature of the luminescence intensity decay profiles.     

Stability of thin-film solid-state electroluminescent devices based on tris(2,2'-bipyridine)ruthenium(II) complexes

The factors affecting the operating life of the light-emitting electrochemical cells (LECs) based on films of tris(2,2'-bipyridine)ruthenium(II) both in sandwich (using an ITO anode and a Ga:Sn cathode) and planar (using interdigitated electrode arrays (IDAs)) configurations were investigated. Stability of these devices is greatly improved when they are produced and operated under drybox conditions. The proposed mechanism of the LEC degradation involves formation of a quencher in a small fraction of tris(2,2'-bipyridine)ruthenium(II) film adjacent to the cathode, where light generation occurs, as follows from the observed electroluminescence profile in the LECs constructed on IDAs, showing that the charge injection in such devices is highly asymmetric, favoring hole injection. Bis(2,2'-bipyridine)diaquoruthenium(II) is presumed to be the quencher responsible for the device degradation. A microscopic study of photo- and electroluminescence profiles of planar light-emitting electrochemical cells was shown as a useful approach for studies of charge carrier injection into organic films.     

Effect of the parent ligand on the photophysical properties of closely-coupled, binuclear ruthenium(II) tris(2,2'-bipyridine) complexes

The photophysical properties of closely-coupled, binuclear complexes formed by connecting two ruthenium(II) tris(2,2'-bipyridine) complexes via an alkynylene group differ significantly from those of the relevant mononuclear complex. In particular, the energy of the first triplet excited state is lowered relative to the parent complex, because of the presence of the alkynylene substituent, while the triplet lifetime is prolonged, in part, because of extended electron delocalization. We now report that the triplet lifetime is also affected by the nature of the spectator 2,2'-bipyridyl ligands. Thus, replacing the parent 2,2'-bipyridine ligands with the corresponding 4,4'-dinitro-substituted ligands serves to decrease the luminescence yield and lifetime. With the corresponding carboxylate ester, the luminescence yield and lifetime are increased. Perdeuteration of the parent 2,2'-bipyridine ligands also leads to a modest increase in the luminescence yield. Such observations are indicative of electronic coupling between the various metal-to-ligand, charge-transfer excited triplet states. Temperature dependence studies confirm that these excited states are closely spaced and thermally accessible at ambient temperature. For some of the binuclear complexes, the quantum yield for formation of the lowest-energy triplet state is significantly less than unity.     

The unexpected preference for the fac-isomer with the tris(5-ester-substituted-2,2'-bipyridine) complexes of ruthenium(II)

The synthesis of a number of new 2,2'-bipyridine ligands, functionalized with bulky ester side groups, is reported (L2-L8). Their reaction with [Ru(DMSO)(4)Cl(2)] gives rise to tris-chelate ruthenium(II) metal complexes which show an unusually high proportion of the fac-isomer, as judged by (1)H NMR following conversion to the ruthenium(II) complex of 2,2'-bipyridine-5-carboxylic acid methyl ester (L1). The initial reaction appears to have thermodynamic control with the steric bulk of the ligands causing the third ligand to be labile under the reaction conditions used, giving rise to disappointing yields and allowing rearrangement to the more stable facial form. DFT studies indicate that this does not appear to be as a consequence of a metal centered electronic effect. The two isomers of [Ru(L1)(3)](PF(6))(2) were separated into the two individual forms using silica preparative plate chromatographic procedures, and the photophysical characteristics of the two forms compared. The results appear to indicate that there is no significant difference in both their room temperature electronic absorption and emission spectra or their excited state lifetimes at 77 K.     

Direct observation of the fourth MLCT triplet state in ruthenium(II) tris(2,2'-bipyridine)

The luminescence properties of ruthenium(ii) tris(2,2'-bipyridine) have been recorded in butyronitrile solution and in a transparent KBr disk over a reasonable temperature range. In solution, spectral curve fitting routines indicate that emission arises solely from an ensemble of triplet states, each of which is of Metal-to-Ligand, Charge-Transfer (MLCT) character and of closely comparable energy. At ambient temperature, dual emission is observed for the KBr disk and interpreted in terms of luminescence from both the ensemble and the fourth MLCT triplet state that lies at slightly higher energy. Relative reorganisation energies, energies, Huang-Rhys factors and radiative rate constants have been calculated for the two emissive states. It is confirmed that the fourth MLCT triplet state possesses more singlet character than the ensemble.     

Vitamin C derivatives as new coreactants for tris(2,2'-bipyridine)ruthenium(II) electrochemiluminescence

Vitamin C derivatives (VCDs) have been widely used as the alternative and stable sources of vitamin C, and accordingly exhibit many new applications, such as anti-tumor and central nervous system drug delivery. In this study, their Ru(bpy)₃²⁺ electrochemiluminescence (ECL) properties have been investigated for the first time using well-known ascorbyl phosphate and ascorbyl palmitate as representative VCDs. Ascorbyl phosphate and ascorbyl palmitate are VCDs with different substituted positions. Both of them increase Ru(bpy)₃²⁺ ECL, indicating that other VCDs may also enhance Ru(bpy)₃²⁺ ECL signal. The calibration plot for ascorbyl phosphate is linear from 3 × 10⁻⁶ to 1.0 × 10⁻³ M with a detection limit of 1.4 × 10⁻⁶ M at a signal-to-noise ratio of 3. The relative standard deviation is 3.6% for six replicate measurements of 0.01 mM ascorbyl 2-phosphate solution. The proposed method is about one order of magnitude more sensitive than electrochemical and UV–vis methods for the determination of ascorbyl phosphate, and is used successfully for the determination of ascorbyl phosphate in whitening and moisturising body wash.     

Direct ion exchange of tris(2,2'-bipyridine)ruthenium(II) into an alpha-zirconium phosphate framework

The first direct ion exchange of a luminescent metal complex into an alpha-zirconium phosphate framework has been accomplished. A hydrated form of alpha-ZrP, with an expanded 10.3 A interlayer distance, has been used for the intercalation of Ru(bpy)(3)(2+), resulting in further expansion to 15.2 A. The Ru(bpy)(3)(2+) luminescence band is slightly blue-shifted. High Ru(bpy)(3)(2+) loadings lead to luminescence self-quenching.     

The isolation and secondary functionalisation of fac-tris-2,2'-bipyridine complexes of ruthenium(II)

fac-Ruthenium(II) tris-(5-carboxy-2,2'-bipyridine) has been synthesised as a single geometric isomer for the first time, and proves to be a good 'building-block' to introduce new functionality with retention of the isomeric integrity.     

Isotope effects on the picosecond time-resolved emission spectroscopy of tris(2,2'-bipyridine)ruthenium (II)

The excited-state properties of the transition metal complexes tris(2,2'-bipyridine) ruthenium(II) and tris(4,7-diphenyl-1,10-phenanthroline) ruthenium(II) are examined using picosecond time-resolved luminescence spectroscopy. For both complexes, direct observation of a short-lived high-energy emission with a lifetime of less than 4 ps is reported. Upon deuteriation of the complexes the lifetime of the high-energy emission shows a marked increase with a biexponential decay (20 and approximately 300 ps components). Examination by time-resolved excited-state resonance Raman shows that for the perprotio complexes features attributable to the 3MLCT excited state are formed within 4 ps, while for the perdeuterio a rise time of approximately 20 ps is observed in the 3MLCT features. The results indicate that the emission in both cases may be 1MLCT in origin and are discussed with respect to heterogeneous electron transfer.     

CEC with tris(2,2′‐bipyridyl) ruthenium(II) electrochemiluminescent detection

For the first time, CEC was coupled with tris(2,2‐bipyridyl) ruthenium(II) ( Ru(bpy) electrochemiluminescence detection. Efficient CEC separations of proline, putrescine, spermidine and spermine were achieved when the pH of the mobile phase is in the range of 3.5–7.0. The optimum mobile phase for CEC separation is much less acidic than that for CZE separation, which matches better with the optimum pH for Ru(bpy) electrochemiluminescence detection and dramatically shortens the analysis time because of larger EOF at higher pH. The time for CEC separation of the polyamines is less than 12.5 min, which is about half as much as the time needed for CZE. The detection limits were 1.7, 0.2, and 0.2 μM for putrescine, spermidine, and spermine, respectively. The RSD of retention time and peak height of these polyamines were less than 0.85 and 6.1%, respectively. The column showed good long‐term stability, and the RSD of retention time is below 5% for 150 runs over one‐month use. The method was successfully used for the determination of polyamines in urine samples.     

Multimetallic ruthenium(II) complexes as electrochemiluminescent labels

Two homometallic complexes containing two and three ruthenium polypyridyl units linked by amino acid lysine (Lys) and the related dipeptide (LysLys) were synthesized and their electrochemical, spectroscopic, and electrochemiluminescence (ECL) properties were investigated. The electrochemical and photophysical data indicate that the two metal complexes largely retain the electronic properties of the reference compound for the separate ruthenium moieties in the two bridged complexes, [4-carboxypropyl-4'-methyl-2,2'-bipyridine]bis(2,2'-bipyridine)ruthenium(II) complex. The ECL studies, performed in aqueous media in the presence of tri-n-propylamine as co-reactant, show that the ECL intensity increases by 30% for the dinuclear and trinuclear complexes compared to the reference. Heterogeneous ECL immunoassay studies, performed on larger dendritic complexes containing up to eight ruthenium units, demonstrate that limitations due to the slow diffusion can easily be overcome by means of nanoparticle technology. In this case, the ECL signal is proportional to the number of ruthenium units. Multimetallic systems with several ruthenium centers may, however, undergo nonspecific bonding to streptavidin-coated particles or to antibodies, thereby increasing the background ECL intensity and lowering the sensitivity of the immunoassay.     

Novel tris(2,2'-bipyridine)ruthenium(II) cathodic electrochemiluminescence in aqueous solution at a glassy carbon electrode

A novel approach of generating cathodic electrochemiluminescence of Ru(bpy)3(2+) at -0.4 V triggered by reactive oxygen species is reported for detecting alkylamines and some organic acids.     

The photophysical properties of short, linear arrays of ruthenium(II) tris(2,2′-bipyridine) complexes

A series of linear polynuclear ruthenium(II) tris(2,2′-bipyridine) complexes has been synthesized whereby individual chromophores are separated by 1,4-diethynylenebenzene subunits bearing alkoxy groups for improved solubility. These arrays contain two, three, four or five metal centers. The compounds are reasonably soluble in polar organic solvents and they possess optical absorption spectral properties that are dominated by transitions associated with the polytopic ligand. Weak luminescence is observed for each complex in deoxy genated acetonitrile at room temperature that appears to be characteristic of emission from a metal-to-ligand charge-transfer triplet state. The emission lifetime is essentially independent of temperature, at least over a modest range. There is no indication for interaction between close-lying triplet states and no obvious sign of a low-energy τ, τ^* triplet associated with the polytopic ligand. The photophysical properties suggest that the longer arrays are segmented.     

Selective determination of acenaphthylene by flow injection analysis with tris(2,2'-bipyridine)ruthenium(II) chemiluminescence detection

A simple, rapid flow injection chemiluminescence (FI-CL) method has been developed for selective determination of acenaphthylene (ACY), based on the CL produced in the reaction of tris(2,2′-bipyridine)ruthenium(III) (Ru(bipy)₃³⁺) and ACY in an acidic buffer solution. Under the optimum experimental conditions, the calibration curve was linear over the range 5.0 × 10⁻³ to 4.0 × 10⁻⁷ mol L⁻¹ for ACY. The detection limit (S/N = 3) was 2.0 × 10⁻⁷ mol L⁻¹ and the relative standard deviation of 10 replicate measurements was 2.3% for 5.0 × 10⁻⁵ mol L⁻¹ of ACY. Selectivity of CL reaction of ACY from other 15 polycyclic aromatic hydrocarbons (PAHs) was investigated by flow injection method. The method was applied to determine the ACY content in soil.     

A tris(2,2'-bipyridine)ruthenium(II) derivative tethered to a cis-PtCl2(amine)2 moiety: syntheses, spectroscopic properties, and visible-light-induced scission of DNA

A tris(2,2'-bipyridine)ruthenium(II) derivative having two N-(3-ammoniopropyl)carbamoyl pendant units has been prepared and reacted with cis-PtCl2(DMSO)2 (DMSO = dimethyl sulfoxide) to give a heteronuclear Ru(II)Pt(II) dimer having a cis-Pt(II)Cl2(aliphatic amine)2 unit, [Ru(bpy)2(mu-bridge)PtCl2](PF6)2 (bpy = 2,2'-bipyridine, bridge = 4,4'-bis(N-(3-aminopropyl)carbamoyl)-2,2'-bipyridine). The ESI-TOF mass spectrum of the Ru(II)Pt(II) dimer shows a set of signals corresponding to {[Ru(bpy)2(mu-bridge)PtCl2](PF6)}(+) (m/z 1181.1). The MLCT (metal-to-ligand charge transfer) luminescence intensity is enhanced upon the platination of two amine units, presumably due to the formation of a relatively rigid metallocycle. More interestingly, the luminescence intensity is further enhanced by the complexation of the Ru(II)Pt(II) dimer with either 5'-GMP (guanosine 5'-monophosphate disodium salt) or calf thymus DNA. Visible-light-induced scission of supercoiled pBR322 DNA is found to be efficiently enhanced in the presence of the title Ru(II)Pt(II) dimer.     

Electrogenerated chemiluminescence reaction of tris(2,2'-bipyridine)ruthenium(II) with 2,5-dimethylthiophene as co-reactant in aqueous solution

A novel effective co-reactant for electrogenerated chemiluminescence (ECL) of Ru(bpy)(3)(2+) has been found. Alpha-position-dialkylated thiophene derivatives such as 2,5-dimethylthiophene (DMT) could be used as a co-reactant for Ru(bpy)(3)(2+) ECL. The reaction mechanism of the Ru(bpy)(3)(2+)/DMT system was proposed on the basis of the identification of the reaction product, the relationship between the molecular structure and the chemiluminescent intensity, and the electrochemical study. The obtained reaction mechanism was similar to that of the Ru(bpy)(3)(2+)/aliphatic tertiary amine system. Based on these results, the preliminary studies of the Ru(bpy)(3)(2+) ECL detection system using DMT as a co-reactant were performed. Under the optimal ECL conditions, the plot of ECL intensity versus the concentration of Ru(bpy)(3)(2+) was linear over the concentration range 1.0x10(-8) to 1.5x10(-7) M (determination coefficient=0.9996).     

Electrochemiluminescence of tris(2,2'-bipyridine)ruthenium(II) immobilized in poly(p-styrenesulfonate)-silica-Triton X-100 composite thin-films

The electrochemiluminescence (ECL) of tris(2,2'-bipyridine)ruthenium(II) [Ru(bpy)3(2+)] immobilized in poly(p-styrenesulfonate) (PSS)-silica-Triton X-100 composite films was investigated. The cooperative action of PSS, sol-gel and Triton X-100 attached Ru(bpy)3(2+) to the electrode strongly, and the presence of Triton X-100 prevented drying fractures of the sol-gel films during gelation and even on repeated wet-dry cycles. The modified electrode was used for the ECL detection of oxalate, tripropylamine (TPA) and NADH in a flow injection analysis (FIA) system with a newly designed flow cell. The detection scheme exhibited good stability, short response time and high sensitivity. Detection limits were 0.1, 0.1 and 0.5 micromol L(-1) for oxalate. TPA and NADH, respectively, and the linear concentration range extended from 0.001 to 1 mmol L(-1) for the three analytes. Applications of the flow cell in ECL and electrochemical detection, as well as the immobilization of reagents based on the cooperative action, are suggested.     

Electrochemiluminescent behaviors of alkaloids and tris(2,2'-bipyridine) ruthenium in organically modified silicate film

Electrogenerated chemiluminescences (ECLs) of alkaloids, such as berberine, trigonelline, allantoin and betaine, were studied in an aqueous alkaline buffer solution (pH 9.5), based on tris(2,2′-bipyridine)ruthenium(II) [Ru(bpy)₃²⁺] immobilized in organically modified silicates (ORMOSILs) film on a glassy carbon electrode (GCE). The immobilized Ru(bpy)₃²⁺ showed good electrochemical and photochemical activities. In a flow system, the eluted alkaloids were oxidized on the modified GCE, and reacted with immobilized Ru(bpy)₃²⁺ at the potential of +1.50 V (versus Ag/AgCl). The luminescence with λ_max 610 nm was caused by a reaction of electrolytically formed Ru(bpy)₃³⁺ with an oxidized amine group to generate Ru(bpy)₃^2+*. The determination limit was 5 × 10⁻⁶ mol L⁻¹, 8 × 10⁻⁶ mol L⁻¹, 2.0 × 10⁻⁵ mol L⁻¹ and 5.0 × 10⁻⁵ mol L⁻¹ for berberine, trigonelline, allantoin and betaine at S/N 3, respectively. In addition, the factors affecting the determination of the four alkaloids were also studied.