Trace determination of boron,silicon and sulfur with oxygen-18 ion bombardment

In order to determine traces of boron, silicon and sulfur, B(¹⁸O, x)²⁷Mg, Si(¹⁸O, x)⁴³Sc and S(¹⁸O, x)⁴⁷V reactions have been investigated between 15 and 44MeV. At 34 MeV, only a few of the systematically identified nuclear interferences produce²⁷Mg and the detection limit is 30ng boron for a 10 minute irradiation with a 0.3μA·cm⁻² oxygen-18 beam. Silicon analysis has shown nuclear interferences from Al, P and K; interference-free detection limit is 80 ng silicon for an hour irradiation with a 0.4 μA·cm⁻² beam at 39 MeV. There is no nuclear interference for the sulfur determination and the detection limit is 5 ng sulfur for a 30 minutes irradiation with a 0.5 μA·cm⁻² beam at 39 MeV. Thus a selective and sensitive sulfur determination can be achieved.     

Reaction of diphenyl[2-(triethoxysilyl)ethyl]phosphine oxide with boron trifluoride etherate

Diphenyl[2-(trifluorosilyl)ethyl]phosphine oxide was synthesized by the reaction of diphenyl[2-(triethoxysilyl)ethyl]phosphine oxide with boron trifluoride etherate. As shown by the ¹H, ¹³C, ¹⁹F, ³¹P, ²⁹Si multinuclear NMR spectroscopy data, the silicon atom in the molecule is tetracoordinate. The absence of P=O→Si interaction in diphenyl[2-(trifluorosilyl)ethyl]phosphine oxide, as follows from the comparison of the calculated [GIAO B3LYP/6-311++G(2d,p)] and experimental δ(²⁹Si) and δ(³¹P) values, is due to the formation of complex with BF₃ by the phosphoryl oxygen.     

Hydration effects on the molecular structure of silica-supported vanadium oxide catalysts: A combined IR,Raman, UV–vis and EXAFS study

The effect of hydration on the molecular structure of silica-supported vanadium oxide catalysts with loadings of 1–16 wt.% V has been systematically investigated by infrared, Raman, UV–vis and EXAFS spectroscopy. IR and Raman spectra recorded during hydration revealed the formation of V–OH groups, characterized by a band at 3660 cm⁻¹. Hydroxylation was found to start instantaneously upon exposure to traces of water, reflecting a very high sensitivity of the supported vanadium oxide catalysts for H₂O. Further hydration resulted in the appearance of a V–O–V vibration band located around 700 cm⁻¹ pointing to the formation of di- or polymeric species. EXAFS analysis at 77 K indicated structural changes as the oxygen coordination changed from four to five. Moreover, a V⋯V contribution was detected for the hydrated species. The IR, Raman and UV–vis data suggested a pyramidal anchoring of the dehydrated VO_x species, whereas, the EXAFS data pointed to the presence of single V–O–Si bonded VO_x species. This difference is attributed to water condensation effects at 77 K during EXAFS acquisition, resulting in a partial re-hydroxylation of the dehydrated samples, as confirmed by complementary IR and Raman analysis. Combining the results of this study with data from our previous studies [D.E. Keller, F.M.F. de Groot, D.C. Koningsberger, B.M. Weckhuysen, J. Phys. Chem. B 109 (2005) 10223; D.E. Keller, D.C. Koningsberger, B.M. Weckhuysen, J. Phys. Chem. B 110 (2006) 14313] as well as literature led to a reaction scheme in which a monomeric VO_x species anchored by three Si–O–V bonds to the silica support (pyramidal-type structure) is transformed into a monomeric VO_x species anchored by one Si–O–V bond (umbrella-type structure) by partial hydration of the catalyst material. This results in the formation of both V–O–H and Si–O–H bonds. At higher water pressures, larger vanadium oxide clusters are formed due to full hydration of the catalyst surface and a de-attachment of the vanadium oxide from the support surface. The results of this study provide evidence, that an umbrella-type structure (i.e., Si–O–VO(OH)₂) could be present under catalytic conditions where H₂O is a reaction product (e.g., partial oxidation of methanol to formaldehyde and oxidative dehydrogenation of alkanes). In other words, both the pyramidal ((Si–O)₃–VO) and the umbrella (Si–O–VO(OH)₂) model can exist at a support surface, their relative ratio depending on the hydration degree of the catalyst material. This study also illustrates that a corroborative characterization requires the use of multiple spectroscopic techniques applied at the same samples under almost identical measuring conditions.     

Measurement of30Si as a tracer by neutron-induced prompt gamma-ray analysis

The application of stable isotope analysis using neutron-induced prompt -ray analysis (PGA) with cold/thermal neutron beams for the tracer study of geological materials are discussed. Silicon has three natural isotopes differing in abundance:²⁸Si (92.23%),²⁹Si (4.67%) and³⁰Si (3.10%). For the purpose of the assessment of Si migration in engineered barrier material, enriched³⁰Si can be used as a tracer due to its nuclear and chemical properties. Isotope analysis of³⁰Si was performed by PGA during the tracer study. Neutron intensity at the sample position was 1.4·10⁸ n¢cm^–2·s^–1, 2.4·10⁷ n·cm^–2·s^–1 for cold and themal neutron guided beams of JRR-3M, respectively. Calibration curves and analytical sensitivity of³⁰Si were determined based on measurement of standard samples. BG and detection limits for³⁰Si analysis were also measured in Japanese bentonite (Kunigel V1 and Kunipia F) and their pore water. Fiffteen elements were determined simultaneously using PGA.     

Triterpene glycosides of Thalictrum squarrosum. IV. Structures of squarrosides A1, A2, B1, and B2

Four new cycloartane glycosides have been isolated from a methanolic extract ofThalictrum squarrosum Stephan ex Willd.: squarroside A1 (I) — (21R, 22S, 23R)-3β-(β-D-glucopyranosyloxy)-21α-methoxy-21,23-epoxycycloart-24-ene-22β,30-diol, C₃₀H₆₀O₁₀; squarroside A2 (II) — the (21S)-epimer of compound (I); squarroside B1 (III) (21R, 22S, 23R)-3gb-[O-α-L-rhamnopyranosyl-(1 → 6)-β-D-glucopyranosyloxy]-21α-methoxy-21,23-epoxycycloart-24-ene-22β,30-diol, C₄₃H₇₀O₁₄; and squarroside B2 (IV) — the (21S)-epimer of compound (III). The proposed structures were determined on the basis of¹H and¹³C NMR spectroscopy, FAB mass spectrometry, and chemical transformations. Irkutsk Institute of Organic Chemistry, Siberian Branch, USSR Academy of Sciences. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 516–523, July–August, 1989.     

Synthesis and characterization of modular polyphosphonate homopolymers and copolymers

Linear polyphosphonates with the generic formula –[P(Ph)(X)OR′O]_n– (X = S or Se) have been synthesized by polycondensations of P(Ph)(NEt₂)₂ and a diol (HOR′OH = 1,4-cyclohexanedimethanol, 1,4-benzenedimethanol, tetraethylene glycol, or 1,12-dodecanediol) followed by reaction with a chalcogen. Random copolymers have been synthesized by polycondensations of P(Ph)(NEt₂)₂ and mixture of two of the diols in a 2:1:1 mol ratio followed by reaction with a chalcogen. Block copolymers with the generic formula –[P(Ph)(X)OR′O]_{(x + 2)} –[P(Ph)(X)OR′O]_{(x + 3)}– (X = S or Se) have been synthesized by the polycondensations of Et₂N[P(Ph)(X)OR′O]_{(x + 2)}P(Ph)NEt₂ oligomers with HOR′O[P(Ph)(X)OR′O]_{(x + 3)}H oligomers followed by reaction with a chalcogen. The Et₂N[P(Ph)(X)OR′O]_{(x + 2)}P(Ph)NEt₂ oligomers are prepared by the reaction of an excess of P(Ph)(NEt₂)₂ with a diol while the HOR′O[P(Ph)(X)OR′O]_{(x + 3)}H oligomers are prepared by the reaction of P(Ph)(NEt₂)₂ with an excess of the diol. In each case the excess, x is the same and determines the average block sizes. All of the polymers were characterized using ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy, TGA, DSC, and SEC. ³¹P{¹H} NMR spectroscopy demonstrates that the random and block copolymers have the expected arrangements of monomers and, in the case of block copolymers, verifies the block sizes. All polymers are thermally stable up to ~300°C, and the arrangements of monomers in the copolymers (block vs. random) affect their degradation temperatures and T_g profiles. The polymers have weight average MWs of up to 3.8 × 10⁴ Da.     

Intramolecular O → Si donor-acceptor interaction in R2P(=O)CH2CH2SiF3 molecules: Synthesis of dialkyl [2-(trifluorosilyl)ethyl]phosphonate and bis[(chloromethyl)dimethylsilyl] styrylphosphonate

The reaction of diethyl [2-(triethoxysilyl)ethyl]phosphonate with boron trifluoride etherate was used to synthesize diethyl [2-(trifluorosilyl)ethyl]phosphonate. The reaction of bis(trimethylsilyl) styrylphosphonate with chloro(chloromethyl)dimethylsilane gave bis[(chloromethyl)dimethylsilyl] styrylphosphonate. Multinuclear ¹H, ¹³C, ¹⁹F, ²⁹Si, and ³¹P NMR spectroscopy established the absence of a P=O → Si coordination bond in these compounds and the four-coordinate state of the silicon atom. Evidence for this finding was obtained by B3LYP/6-31G(d) quantum-chemical calculations. However, the same calculations for R₂P(=O)· CH₂CH₂SiF₃ (R = Me, Me₂N) showed the presence in such molecules of an O → Si coordination bond both in the gas phase and in CHCl₃ solution. The distance between the O and Si atoms in this series molecules decreases with R in the order: MeO > Me > Me₂N. The axial Si-F bond length increases in the same order and parallels the order of the Hammet σ ₀ ^m constants of these substituents, relating to their interaction with π-electron systems.     

Determination of isotopic composition of lithium by neutron activation analysis; comparison with mass spectrometry

An activation analysis method is described for routine determination of⁶Li-abundances in various lithium compounds on the basis of the reaction sequence⁶Li(n,α)T and¹⁶O(t, n)¹⁸F and the measurement of¹⁸F. Irradiations of diluted equeous solutions of samples containing CrO₃ as internal flux monitor were carried out at a thermal neutron flux density of ϕ≤10¹¹ n·cm⁻²·sec⁻¹. Interferences from variations in neutron self-shielding oxygen concentration and triton range do not exceed 0.5% when using the dilution technique. The results for⁶Li abundances from 3.52 to 7.60% with standard deviations of 1 to 2.5% were confirmed by mass spectrometric measurements.     

[Ni(en)2]6H2[(VO)12O6B18O42]·15H2O的水热合成和晶体结构

在水热的条件下合成了1个多聚钒硼酸盐[Ni(en)2]6H2[(VO)12O6B18O42]15H2O,化学式为C24H128B18N24Ni6O75V12(Mr=3111.62),用单晶X射线衍射方法测定了它的结构,该晶体属三方晶系,R-3空间群,晶胞参数为a=13.942(2)?=96.476(2),V=2653.9(5)?,Z=1,Dc=1.947g/cm3,=21.55cm-1,F(000)=1574,2108个可观察衍射点(I>2(I)),最终结构精修到偏离因子R=0.0594,wR=0.1398,S=1.009。在该化合物的结构中,18员环的B18O42通过18个B(3-O)V键被2个V6O15簇夹在中间,6个[Ni(en)2]基团分别通过2个Ni(3-O)B与B18O42环相连。     

Determination de L’oxygene et du fluor au moyen de l’activation par les photons γ et le comptage des neutrons retardes emis par17N

The activation of¹⁸O and¹⁹F by the reactions¹⁸O(γ, p)¹⁷N and¹⁹F(γ, 2p)¹⁷N was determined as a function of the maximum energy of the bremsstrahlung beam. By the use of this method it is possible to measure oxygen or fluorine by counting the delayed neutrons emitted by¹⁷N with a half-life of 4.2 sec.      

Determination of fluorine in organic compounds by epithermal neutron activation analysis

Classical activation analysis of fluorine by thermal neutrons has a limited application because of frequent interference from chlorine, the short half life²⁰F (11.4 s) and too high dead time of detectors. A procedure is described for fluorine determination using¹⁹F (n,p)¹⁹O reaction. Use of a boron carbide shield has no effect on the activity of¹⁹O (boron ratio −1) but considerably reduces background and interference due to¹⁸O (n, γ)¹⁹O reaction. The technique has been successfully applied to the determination of fluorine in organic compounds even in the presence of large amounts of chlorine and oxygen.     

Synthesis and structural characterization of the novel cluster compound

Reaction of [Mo3Y(mu-S)3(dtp)4(H2O)] (Y = O, S; dtp = S2P(OC2H5)2(-)) with HgI2 gave the novel compound [[Mo3S7(dtp)3]4 x I][(HgI3)3] x 4H2O (1), which contains a [[Mo3S7(dtp)3]4 x I] tetramer and (HgI3)-. Compound 1 has been characterized by IR, Raman, UV/Vis, and NMR spectroscopy and single-crystal X-ray diffraction analysis. It is shown that this formation process can be referred to as a new cluster reaction. The structure and spectroscopic data of the tetramer is also compared with that of the related discrete cluster [Mo3S7(dtp)3 x I]. Crystal data: space group F23, a = 26.786(3) A, V = 19218.7(4) A3, Z = 4, R = 0.059.     

Synthesis, X-ray and neutron diffraction characterization, and ionic conduction properties of a new oxothiomolybdate Li3[Mo8S8O8(OH)8[HWO5(H2O)]] x 18H2O

The new oxothiomolybdate anion [Mo8S8O8(OH)8[HWO5(H2O)]]3- (denoted HMo8W3-) has been synthesized in aqueous solution by an acido-basic condensation reaction. Four (Mo(V)2S2O2) building blocks are connected through hydroxo bridges around a central [W(VI)O6] octahedron. X-ray and neutron diffraction studies have been performed on single crystals of the lithium salt Li3[Mo8S8O8(OH)8[HWO5(H2O)]] x 18H2O (Li3HMo8W x 18H2O) in an aqueous grown from HMo8W3- solution of LiCl (1 M). The neutron diffraction experiment enabled us to locate both the protons and the lithium ions. In the structure of Li3HMo8W x 18H20, ring-shaped anions interleaved by a cluster of disordered hydrogen-bonded water molecules stack on top of each other along lithium pillars. The lithium columns are formed by alternating edge-sharing octahedra and tetrahedra, with one lithium site in four being totally vacant. Ionic conductivity measurements on pressed pellets have shown that Li3HMo8W x 18H2O is a good ionic conductor at room temperature (sigma = 10(-5) S cm(-1)), but the ionic conductivity on single crystals is smaller by two orders of magnitude and is isotropic; this suggests the main path of conduction involves surface protons rather than lithium ions of the bulk.     

Efficiency of an in-line charcoal filter in automated chemistry process control unit during the synthesis of18F-fluorodeoxyglucose (FDG)

¹⁸F fluoride ion is produced by bombarding¹⁸O enriched water using an 11 MeV negative ion Radioisotope Delivery System (RDS-112) cyclotron by¹⁸O(p,n)¹⁸F reaction. During the synthesis of¹⁸F-FDG, a gaseous effluent containing¹⁸F is released. To quantitate the loss of¹⁸F during the synthesis, the¹⁸F activity at the end of bombardment delivered to chemical process control unit (CPCU), the amount of¹⁸F-FDG produced, the residual activity in CPCU, the activity trapped in charcoal filter, reaction vessels, cartridge and resin column were measured. A dose calibrator was used to assay total¹⁸F delivered to the CPCU and FDG produced. All other measurements were with a calibrated ionization chamber in a fixed geometry. The amount of gaseous¹⁸F released was calculated. For routine productions, conversion of¹⁸F into FDG was 46.0±4.0%. In six production runs without a charcoal filter, the mean gaseous release of¹⁸F was 10.6±1.0%. With an activated charcoal filter retrofitted to the exhaust of the CPCU, then mean gaseous¹⁸F activity released was 1.2±1.2%. The residual activity in the synthesis unit was 12.9±3.5%. The remaining activity i.e. 33.1±4.2%, was in the reaction vessels, cartridges and in the resin column. The efficiency of a charcoal filter for trapping¹⁸F gaseous effluent during synthesis was found to be >99.0%.     

Hydrogen‐bonded frameworks of bis(2‐carboxypyridinium) hexafluorosilicate and bis(2‐carboxyquinolinium) hexafluorosilicate dihydrate

In bis(2‐carboxypyridinium) hexafluorosilicate, 2C₆H₆NO₂⁺·SiF₆²⁻, (I), and bis(2‐carboxyquinolinium) hexafluorosilicate dihydrate, 2C₁₀H₈NO₂⁺·SiF₆²⁻·2H₂O, (II), the Si atoms of the anions reside on crystallographic centres of inversion. Primary inter‐ion interactions in (I) occur via strong N—H...F and O—H...F hydrogen bonds, generating corrugated layers incorporating [SiF₆]²⁻ anions as four‐connected net nodes and organic cations as simple links in between. In (II), a set of strong N—H...F, O—H...O and O—H...F hydrogen bonds, involving water molecules, gives a three‐dimensional heterocoordinated rutile‐like framework that integrates [SiF₆]²⁻ anions as six‐connected and water molecules as three‐connected nodes. The carboxyl groups of the cation are hydrogen bonded to the water molecule [O...O = 2.5533 (13) Å], while the N—H group supports direct bonding to the anion [N...F = 2.7061 (12) Å].     

Study of the Ternary Complex Formation Between Vanadium(III)-Picolinic Acid and the Amino Acids: Cysteine,Histidine, Aspartic and Glutamic Acids

The complex species formed between vanadium(III)-picolinic acid (HPic) and the amino acids: cysteine (H₂Cys), histidine (HHis), aspartic acid (H₂Asp) and glutamic acid (H₂Glu) were studied in aqueous solution by means of electromotive forces measurements emf(H) at 25 °C and 3.0 mol⋅dm⁻³ KCl as ionic medium. Data analysis using the least-squares program LETAGROP indicates the formation of ternary complexes, whose stoichiometric coefficients and stability constant were determined. In the vanadium(III)-picolinic acid-cysteine system the model obtained was: [V(Pic)(H₂Cys)]²⁺, [V(Pic)(HCys)]⁺, V(Pic)(Cys) and [V₂O(Pic)(Cys)]⁺. The vanadium(III)-picolinic acid-histidine system contained the following complexes: [V(Pic)(HHis)]²⁺, [V(Pic)(His)]⁺, V(Pic)(His)(OH) and [V(Pic)₂(HHis)]⁺. In the vanadium(III)-picolinic acid-aspartic acid system the model obtained was: V(Pic)(Asp), [V(Pic)(Asp)(OH)]⁻ and [V₂O(Pic)(Asp)]⁺ and finally, in the vanadium(III)-picolinic acid-glutamic acid system the complexes: V₂O(Pic)₂(HGlu)₂, V(Pic)(HGlu)₂ and V(Pic)₂(HGlu) were observed.     

Charged particle activation analysis for carbon,nitrogen and oxygen in semiconductor silicon

Convenient processes are described for the charged particle activation analysis for carbon, nitrogen, and oxygen in semiconductor silicon. Suitable activation reactions and incident particle energies were selected, and the interferences examined; the activation curves for the Si+³He→¹¹C and Si+³He→¹⁸F reactions, which may seriously interfere with³He activation analysis, were measured, and the interference caused by the fission of the matrix itself is discussed. A simple technique for the separation of¹¹C present in silicon is proposed. Reliable determination of as low as several parts per billion of the three elements has thus become possible. Semiconductor silicons of various origin were analyzed for C, N and O, and the behaviour of these elements during zone-melting is reported.     

Determination of oxygen with reactor neutrons

Oxygen in silicon was determined by the secondary nuclear reactions of⁶Li(n, α)T and¹⁶O(t, n)¹⁸F. Lithium fluoride was deposited in vacuum on fused quartz, covered with the sample and irradiated in a nuclear reactor. The depth profiles of¹⁸F in fused quartz and in silicon were observed, and enough depth to eliminate surface oxygen was estimated. On the basis of these results, oxygen was determined by the average cross-section method. Oxygen concentration in CZ silicon with various growing condition was 5–26 ppm and was consistent with those determined by the infrared absorption method. The detection limit of oxygen in silicon is 5 ppm.     

One‐dimensionally linked Chain Crown Ether Complexes. Syntheses and Crystal Structures of Complexes [K(18‐Crown‐6)]2[M(SeCN)4](H2O) (M = Pd,Pt)

18‐crown‐6(18‐C‐6) complexes with K₂[M(SeCN)₄] (M = Pd, Pt): [K(18‐C‐6)]₂[Pd(SeCN)₄] (H₂O) ( 1 ) and [K(18‐C‐6)]₂[Pt(SeCN)₄](H₂O) ( 2 ) have been isolated and characterized by elemental analysis, IR spectroscopy and single crystal X‐ray analysis. The complexes crystallize in the monoclinic space group P2₁/n with cell dimensions: 1 : a = 1.1159(3) Å, b = 1.2397(3) Å, c = 1.6003(4) Å, β = 92.798(4)°, V = 2.2111(8) ų, Z = 2, F(000) = 1140, R₁ = 0.0418, wR₂ = 0.0932 and 2 : a = 1.1167(3) Å, b = 1.2394(3) Å, c = 1.5968(4) Å, β = 92.945(4)°, V = 2.2071(9) ų, Z = 2, F(000) = 1204, R₁ = 0.0341, wR₂ = 0.0745. Both complexes form one‐dimensionally linked chains of [K(18‐C‐6)]⁺ cations and [M(SeCN)₄]^2— (M = Pd, Pt) anions bridged by K‐O‐K interactions between adjacent [K(18‐C‐6)]⁺ units.     

Effects of substituents and n-donors on the energies of Si←N,Si←O,and Si=C bonds in hypervalent silenes

The effect of the nature of substituents at sp²-hybridized silicon atom in the R₂Si=CH₂ (R = SiH₃, H, Me, OH, Cl, F) molecules on the structure and energy characteristics of complexes of these molecules with ammonia, trimethylamine, and tetrahydrofuran was studied by the ab initio (MP4/6-311G(d)//MP2/6-31G(d)+ZPE) method. As the electronegativity, χ, of the substituent R increases, the coordination bond energies, D(Si← N(O)), increase from 4.7 to 25.9 kcal mol⁻¹ for the complexes of R₂Si=CH₂ with NH₃, from 10.6 to 37.1 kcal mol⁻¹ for the complexes with Me₃N, and from 5.0 to 22.2 kcal mol⁻¹ for the complexes with THF. The n-donor ability changes as follows: THF ≤ NH₃ < Me₃N. The calculated barrier to hindered internal rotation about the silicon—carbon double bond was used as a measure of the Si=C π-bond energy. As χ increases, the rotational barriers decrease from 18.9 to 5.2 kcal mol⁻¹ for the complexes with NH₃ and from 16.9 to 5.7 kcal mol⁻¹ for the complexes with Me₃N. The lowering of rotational barriers occurs in parallel to the decrease in D _π(Si=C) we have established earlier for free silenes. On the average, the D _π(Si=C) energy decreases by ∼25 kcal mol⁻¹ for NH₃· R₂Si=CH₂ and Me₃N·R₂Si=CH₂. The D(Si←N) values for the R₂Si=CH₂· 2Me₃N complexes are 11.4 (R = H) and 24.3 kcal mol⁻¹ (R = F). sp²-Hybridized silicon atom can form transannular coordination bonds in 1,1-bis[N-(dimethylamino)acetimidato]silene (6). The open form (I) of molecule 6 is 35.1 and 43.5 kcal mol⁻¹ less stable than the cyclic (II, one transannular Si←N bond) and bicyclic (III, two transannular Si←N bonds) forms of this molecule, respectively. The D(Si←N) energy for structure III was estimated at 21.8 kcal mol⁻¹. Dedicated to Academician N. S. Zefirov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1952–1961, September, 2005.