Preparation and characterization of a silica‐based magnetic nanocomposite and its application as a recoverable catalyst for the one‐pot multicomponent synthesis of quinazolinone derivatives

An environmentally benign magnetic silica‐based nanocomposite (Fe₃O₄/SBA‐15) as a heterogeneous nanocatalyst was prepared and characterized using Fourier transform infrared and ultraviolet–visible diffuse reflectance spectroscopies, scanning electron microscopy, X‐ray diffraction, vibrating sample magnetometry and Brunauer–Emmett–Teller multilayer nitrogen adsorption. Its catalytic activity was investigated for the one‐pot multicomponent synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones starting from isatoic anhydride, ammonium acetate and various aldehydes under mild reaction conditions and easy work‐up procedure in refluxing ethanol with good yields. The nanocatalyst can be recovered easily and reused several times without significant loss of catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

CuI‐functionalized halloysite nanoclay as an efficient heterogeneous catalyst for promoting click reactions: Combination of experimental and computational chemistry

Amine‐functionalized halloysite nanotubes (HNTs‐2 N) were prepared and further modified by introduction of salicylaldehyde and formation of imine functionality (HNTs‐2 N‐Sal). The latter was subsequently used for immobilization of CuI and formation of CuI@HNTs‐2 N‐Sal, which could effectively promote click reactions of terminal alkynes, sodium azide and α‐haloketones or alkyl halides in aqueous media and under mild reaction conditions to afford 1,2,3‐triazoles in relatively short reaction times. Notably, the catalyst could be recycled in up to six reaction runs with negligible loss of catalytic activity and CuI leaching. Also, the geometry of CuI adsorption on the modified HNTs surface was explored by molecular simulation with density functional theory. Furthermore, topographic steric maps of possible coordination modes were obtained using the recently released SambVca2 web application tool. Based on obtained results, a catalytic site with superior performance was suggested.     

Graphene‐mesoporous anatase TiO2 nanocomposite: A highly efficient and recyclable heterogeneous catalyst for one‐pot multicomponent synthesis of benzodiazepine derivatives

The potential to bias chemical reaction pathways is a significant goal for physicists and material researchers to design revolutionary materials. Recently, two‐dimensional materials have appeared as a promising candidate for exploring novel catalyst activity in organic reaction. In this context, herein we report an easy and efficient synthesis of substituted benzodiazepines in high yields through the graphene‐based mesoporous TiO₂ nanocomposite (Gr@TiO₂ NCs) catalyst. To validate the merits of the Gr@TiO₂ NCs as a catalyst, we have also designed TiO₂ nanoparticle (NPs) under similar conditions. Successful comprehension realization of Gr@TiO₂ NCs and TiO₂ NPs were concluded from the XRD, SEM, HR‐TEM, EDS elemental mapping, FT‐IR, Raman, UV–Vis and TGA analysis. Gr@TiO₂ NCs has the propitious catalyst performance (~98%) over the TiO₂ NPs (~77%), which could be scrutinized in terms of graphene support toward the TiO₂ NPs and enable the large contact area between graphene and TiO₂ NPs. Incorporated graphene maintaining TiO₂ as a catalytically active and attracting electron to site isolation, as well as protecting TiO₂ from oxidative degradation during the reaction. Moreover, the role of graphene is suggested to prolonged reaction duration, yield and unaltered throughout the reaction because of the π‐π interaction between graphene and TiO₂ NPs. Additionally, the catalyst is recycled by filtration and reprocessed six times without having a significant loss in its catalytic activity.     

Ag3[PMo12O40]: An efficient and green catalyst for the synthesis of highly functionalized pyran‐annulated heterocycles via multicomponent reaction

A facile, efficient and eco‐friendly catalytic protocol was developed for the synthesis of medicinally important pyran‐annulated heterocycles via multicomponent reaction (MCR). Cyclocondensation of differently substituted aromatic aldehydes, malononitrile/ethyl cyanoacetate and various β‐dicarbonyl compounds in the presence of Ag₃[PMo₁₂O₄₀]?nH₂O as heterogeneous catalyst, in EtOH–H₂O, afforded diverse pyran‐fused chromene analogues. The merits observed for this approach were it being conducted via MCR, using commercially available or easily accessible starting materials in the presence of a green and easily separable heterogeneous and reusable catalyst, and affording high yields of desired products in very short reaction times with high purity in one‐pot fashion, thus providing a superior alternative approach for the synthesis of pyran‐annulated heterocycles.     

Sucrose chelated auto combustion synthesis of BiFeO3 nanoparticles: Magnetically recoverable catalyst for the one‐pot synthesis of polyhydroquinoline

Sucrose chelated Bismuth ferrite (BiFeO₃) nanoparticles as a novel heterogeneous catalyst was synthesized by an auto combustion route. Different calcination temperatures (150 °C, 450 °C, 550 °C, 650 °C, 750 °C and 850 °C) have been employed to obtain single phased BiFeO₃ nanoparticles. The perovskite structure formation and disappearance of organic phase (sucrose) was obtained by Fourier transform infrared spectroscopy (FT‐IR). Phase determination and structural characterization was carried out by powder X‐ray diffraction (XRD). The magnetic properties were analyzed by vibrating sample magnetometer (VSM) whereas surface area/pore volume was obtained by Brunauer–Emmett–Teller (BET). Transmission electron microscope (TEM) analyzed the particles size and morphology. Thermal stability was investigated by thermogravimetric analysis (TGA) and determination of constituent elements was carried out by X‐ray Photo‐Electron Spectroscopy (XPS). Raman spectroscopy confirmed the perovskite structure of the synthesized materials. The BiFeO₃ nanoparticles so obtained were employed as heterogeneous catalyst for the synthesis of polyhydroquinoline derivatives. All the polyhydroquinoline derivatives were characterized by Fourier transform infrared spectroscopy (FT‐IR) and Nuclear magnetic resonance spectroscopy (¹H NMR). For the very first time ever we have used BiFeO₃ as a recyclable magnetic nanocatalyst in the one‐pot four component cyclization reaction of benzaldehyde, ethylacetoacetate/methylacetoacetate, dimedone/cyclohexane‐1,3‐dione, and ammonium acetate for the synthesis of polyhydroquinoline derivatives without solvent under refluxing conditions to provide excellent yields of products. BiFeO₃ nanocatalyst (without any functionalization/surface coatings) shows easy magnetic separation, recyclability, reusability along with excellent yield of polyhydroquinoline derivatives in an economic and benign way.     

CuBr‐catalysed one‐pot multicomponent synthesis of 3‐substituted 2‐thioxo‐2,3‐dihydroquinazolin‐4(1H)‐one derivatives

A novel methodology is presented for the synthesis of 3‐substituted 2‐thioxo‐2,3‐dihydroquinazolin‐4(1H)‐one derivatives based on an efficient tandem multicomponent reaction using copper bromide as catalyst. This methodology is based on the multicomponent one‐pot reaction of methyl 2‐bromobenzoate, phenylisothiocyanate derivatives and sodium azide in the presence of copper bromide and l ‐proline under basic conditions. To show the generality of the method, various phenylisothiocyanates bearing electron‐donating or electron‐withdrawing functionalities were used and the desired products were obtained in high isolated yields.     

A reusable polymer‐supported copper(I) catalyst for triazole click reaction on water: An experimental and computational study

In the search for establishing a clickable copper‐catalysed (3 + 2) Huisgen azide–alkyne cycloaddition (CuAAC) reaction under strict conditions, in particular in terms of preventing the presence of copper particles/traces in reaction products and using an environmentally benign medium such as water, we describe here the synthesis of an aminomethyl polystyrene‐supported copper(I) catalyst (Cu(I)‐AMPS) and its characterization by means of Fourier transform infrared and energy‐dispersive X‐ray spectroscopies and scanning electron microscopy. Cu(I)‐AMPS was found to be highly active in the CuAAC reaction of various organic azides with alkynes affording the corresponding 1,4‐disubstituted 1,2,3‐triazoles in a regioselective manner in air at room temperature and using water as solvent. The insolubility and/or partial solubility of the organic azide and alkyne precursors as well as the heterogeneous Cu(I)‐AMPS catalytic system points to the occurrence of the cycloaddition at the organic–water interface ‘on water’ affording quantitative yields of water‐insoluble 1,2,3‐triazoles. A mechanistic study was performed using density functional theory aiming at explaining the observed reactivity and selectivity of the Cu (I)‐AMPS catalyst in CuAAC reactions.     

Synthesis of homoallylic amines and acylhydrazides by tin powder‐promoted multicomponent one‐pot allylation reactions

An efficient process for the synthesis of homoallylic amines and N′‐homoallylic hydrazides is developed from the one‐pot reaction of carbonyl compounds, amines or N‐acylhydrazines, allyllic bromide and tin powder using water as solvent. N‐Acylhydrazines are found to be more reactive than amines in these processes. They can react not only with aldehydes but also with ketones to give the corresponding N′‐homoallylic hydrazides. Copyright © 2016 John Wiley & Sons, Ltd.     

Sequential one‐pot multicomponent synthesis of bis‐aminothiazols and evaluation of their antibacterial and antioxidant activities

A series of novel bis‐thiazoles were synthesized through a one‐pot semi‐five‐component reaction of the prepared α‐bisbromo ketones, aldehydes, and thiosemicarbazide in the presence of p‐TsOH under reflux condition. Products were obtained in reasonable yields via an efficient, convenient, and simple setup. The inhibitory activity on bacterial growth of the products was studied against Gram‐negative (Escherichia coli and Pseudomonas aeruginosa) and Gram‐positive bacterial strains (Micrococcus luteus, Staphylococcus aureus) at different concentrations (25, 50, 100, and 200 μg/mL at 600 nm). Most of the products showed inhibitory activity at the concentration of 200 μg/mL. In addition, bis‐thiazoles showeed high to moderate antioxidant activity using the diphenylpicrylhydrazyl (DPPH) method. Bis‐thiazoles 6i and 6j showed higher antioxidant activity than vitamin C and vitamin E.     

Water as a solvent for Ru‐catalyzed click reaction: Highly efficient recyclable catalytic system for triazolocoumarins synthesis

A new family of Ru (III) complexes has been synthesized, characterized and their catalytic performance has been tested for alkyne–azide cycloaddition (AAC) in water under ultrasonic irradiation conditions. These complexes are found to be effective heterogeneous catalysts for the regioselective synthesis of 1,4‐disubstituted‐1,2,3‐triazoles giving access to these products in excellent yields. The catalyst system is equally active for one‐pot multi‐component protocol of the AAC reactions. Also, successive sequencing of Huisgen reaction with Knoevenagel condensation reaction results in the effective assembly of a diversified hitherto unreported 1,2,3‐triazolyl coumarin frameworks. In present strategy, the catalyst could be easily isolated by simple filtration and reused up to eight consecutive cycles without significant drop in the reaction yields. During the leaching experiment, there is no leaching amount of the catalyst was detected, suggesting true heterogeneity in the catalytic system. The results of gram‐scale reaction and green metrics calculations also confirmed the sustainability and industrial applicability of the current catalytic protocol.     

Polymer‐supported macrocyclic Schiff base palladium complex as an efficient catalyst for the Heck reaction

A polymer‐supported macrocyclic Schiff base palladium complex has been synthesized. In the Heck reaction of aryl iodides and bromides with ethyl acrylate or styrene, the complex has been proved to give the corresponding products in good to excellent yields. The reaction proceeded smoothly in the presence of 0.5 mol% of catalyst in DMF within 1–4 h. Recycling studies have shown that the catalyst can be readily recovered and reused for four cycles with only a slightly decrease in its activity. Copyright © 2011 John Wiley & Sons, Ltd.     

H5BW12O40 as a green and efficient homogeneous but recyclable catalyst in the synthesis of 4H‐Pyrans via multicomponent reaction

Keggin‐type heteropolyacid, H₅BW₁₂O₄₀ (BWA) with a higher negative charge and stronger Brønsted acidity comparing to Si and P derivatives was used as an efficient, green, and reusable catalyst in a three‐component reaction involving the cyclocondensation of various β‐dicarbonyl compounds, differently substituted aromatic aldehydes and malononitrile in EtOH/H₂O for the facile, clean, and high yielding synthesis of 4H‐pyrans. All reactions were completed in short times and the products were obtained in good to excellent yields. The reaction medium could be recycled and reused several times without any loss of efficiency.     

One‐pot synthesis of star‐block copolymers using double click reactions

3‐Arm star‐block copolymers, (polystyrene‐b‐poly(methyl methacrylate))₃, (PS‐b‐PMMA)₃, and (polystyrene‐b‐poly(ethylene glycol))₃, (PS‐b‐PEG)₃, are prepared using double‐click reactions: Huisgen and Diels–Alder, with a one‐pot technique. PS and PMMA blocks with α‐anthracene‐ω‐azide‐ and α‐maleimide‐end‐groups, respectively, are achieved using suitable initiators in ATRP of styrene and MMA, respectively. However, PEG obtained from a commercial source is reacted with 3‐acetyl‐N‐(2‐hydroxyethyl)‐7‐oxabicyclo[2.2.1]hept‐5‐ene‐2‐carboxamide (7) to give furan‐protected maleimide‐end‐functionalized PEG. Finally, PS/PMMA and PS/PEG blocks are linked efficiently with trialkyne functional linking agent 1,1,1‐tris[4‐(2‐propynyloxy)phenyl]‐ethane 2 in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) at 120 °C for 48 h to give two samples of 3‐arm star‐block copolymers. The results of the peak splitting using a Gaussian deconvolution of the obtained GPC traces for (PS‐b‐PMMA)₃ and (PS‐b‐PEG)₃ displayed that the yields of target 3‐arm star‐block copolymers were found to be 88 and 82%, respectively. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7091–7100, 2008     

One‐pot synthesis of polysubstituted pyrrolidinones using novel magnetic nanoparticles as an efficient and reusable catalyst

7‐Aminonaphthalene‐1,3‐disulfonic acid‐functionalized magnetic Fe₃O₄ nanoparticles efficiently catalyse the one‐pot multi‐component synthesis of substituted 3‐pyrrolin‐2‐ones without using any other harmful organic reagents. High catalytic activity, ease of recovery, use of an external magnetic field and capability of being reused many times without significant loss of its catalytic activity are additional eco‐friendly properties of this catalytic system. Compared to other methods, our protocol has various advantages such as short reaction times, low catalyst loading, high yields, easy magnetic separation and reusability of the catalyst.     

Introduction of Ag/CuO/MCM‐48 as an efficient catalyst for the one‐pot synthesis of novel pyran‐pyrrole hybrids

Bimetallic silver and copper incorporated mesoporous MCM‐48 (Ag/CuO/MCM‐48) was synthesized by simple wet‐impregnation method. The knowledge about its structural properties was gathered by means of Fourier transform‐infrared, energy‐dispersive X‐ray, X‐ray diffraction, field emission‐scanning electron microscopy, transmission electron microscopy and Brunauer–Emmett–Teller analyses. The catalytic activity of Ag/CuO/MCM‐48 was examined in the one‐pot three‐component reaction of 3‐(1‐methyl‐1H‐pyrrol‐2‐yl)‐3‐oxopropanenitrile, malononitrile and various aromatic aldehydes leading to novel pyran‐pyrrole hybrid derivatives in reduced reaction times (5–10 min) and excellent yields (88–97%). Application of Ag/CuO/MCM‐48 as a potent heterogeneous catalyst with good reusability up to five times, use of ethanol as an eco‐compatible medium and chromatography‐free work‐up are some crucial green aspects of this procedure.     

One‐pot double click reactions for the preparation of H‐shaped ABCDE‐type quintopolymer

We employed for the first time double click reactions: Cu(I) catalyzed azide‐alkyne 1,3‐dipolar cycloaddition and Diels–Alder (4 + 2) reactions for the preparation of H‐shaped polymer possessing pentablocks with different chemical nature (H‐shaped quintopolymer) using one‐pot technique. H‐shaped quintopolymer consists of poly(ethylene glycol) (PEG)‐poly(methylmethacrylate) (PMMA) and poly(ε‐caprolactone) (PCL)‐polystyrene (PS) blocks as side chains and poly (tert‐butylacrylate) (PtBA) as a main chain. For the preparation of H‐shaped quintopolymer, PEG‐b‐PMMA and PCL‐b‐PS copolymers with maleimide and alkyne functional groups at their centers, respectively, were synthesized and simply reacted in one‐pot with PtBA with α‐anthracene‐ω‐azide end functionalities in N,N‐dimethylformamide (DMF) using CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as catalyst at 120 °C for 48 h. The precursors and the target H‐shaped quintopolymer were characterized comprehensively by ¹H NMR, UV, FTIR, GPC, and triple detection GPC. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3409–3418, 2009     

Polypyrrole/Fe3O4/CNT as a recyclable and highly efficient catalyst for one‐pot three‐component synthesis of pyran derivatives

Polypyrrole (PPY)/Fe₃O₄/CNT has been synthesized and characterized by FT‐IR, TEM and SEM techniques and its catalytic activity has been evaluated in the synthesis of several series of pyran derivatives. Tetrahydrobenzo[b]pyranes, 4H‐pyran‐3‐carboxylates, 4H,5H‐pyrano[3,2‐c]chromenes and dihydropyrano[2,3‐c]pyrazoles have been successfully prepared from one‐pot three‐component condensation of aldehyde, malononitrile and active methylene‐containing compounds (dimedone /ethyl acetoacetate/4‐hydroxycoumarin/3‐methyl‐2‐pyrazoline‐5‐one) using PPY/Fe₃O₄/CNT as a new and reusable heterogeneous catalyst. The present method offer several advantages such as; high yields of products, short reaction times, easy work‐up procedure and easy separation of the catalyst from the reaction mixture due to its magnetic character. Furthermore, chemoselective synthesis of bis‐benzo[b]pyran from terephthalaldehyde can be achieved by this method.     

A one‐pot green synthesis of 2‐amino‐4H‐benzo[h]chromenes catalyzed by a dioxomolybdenum Schiff base complex supported on magnetic nanoparticles as an efficient and recyclable nanocatalyst

In this work, catalytic performance of a molybdenum Schiff base complex‐supported magnetic support as a nanocatalyst was evaluated for the preparation of 2‐amino‐4H‐benzo[h]chromenes through one‐pot, three component reactions of 1‐naphthol, various aldehydes, and malononitrile under solvent‐free conditions. A promising greener and eco‐friendly method with a short reaction time, high yield of products, and simple work‐up procedure was achieved. The nanocatalyst could be easily separated and regenerated from reaction media by an external magnet and reused at least seven consecutive times with small drops in its catalytic performance.     

NbCl5: an efficient catalyst for one‐pot synthesis of α‐aminophosphonates under solvent‐free conditions

NbCl₅ has been found to be a very effective catalyst for the synthesis of a variety of α‐aminophosphonates through the Kabachnik–Fields reaction of carbonyl compound, amine and diethyl phosphite under solvent‐free conditions. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of multifunctional polymer containing Ni‐Pd NPs via thiol‐ene reaction for one‐pot cascade reactions

Recently, acid–base bifunctional catalysts have been considered due to their abilities, such as the simultaneous activation of electrophilic and nucleophilic species and their high importance in organic syntheses. However, the synthesis of acid–base catalysts is problematic due to the neutralization of acidic and basic groups. This work reports a facial approach to solve this problem via the synthesis of a novel bifunctional polymer using inexpensive materials and easy methods. In this way, at the first step, heterogeneous poly (styrene sulfonic acid‐n‐vinylimidazole) containing pentaerythritol tetra‐(3‐mercaptopropionate) (PETMP) and trimethylolpropane trimethacrylate (TMPTMA) cross‐linkers were synthesized in the pores of a mesoporous silica structure using click reaction as a novel bifunctional acid–base catalyst. After that, Ni‐Pd nanoparticles supported on poly (styrenesulfonic acid‐n‐vinylimidazole)/KIT‐6 as a novel trifunctional heterogeneous acid–base‐metal catalyst was prepared. The prepared catalysts were characterized by various techniques like FT‐IR, TGA, ICP‐AES, DRS‐UV, TEM, FE‐SEM, EDS‐Mapping, and XRD. The synthesized catalysts were efficiently used as bifunctional/trifunctional catalysts for one‐pot, deacetalization‐Knoevenagel condensation and one‐pot, three‐step and a sequential reaction containing deacetalization‐Knoevenagel condensation‐reduction reaction. It is important to note that the synthesized catalyst showing high chemo‐selectivity for the reduction of nitro group, alkenyl double bond and ester group in the presence of nitrile. Moreover, it was found that the different nanoparticles including Ni, Pd, and alloyed Ni‐Pd showing different chemo‐selectivity and catalytic activity in the reaction.