Efficient Atropodiastereoselective Access to 5,5′‐Bis‐1,2,3‐triazoles: Studies on 1‐Glucosylated 5‐Halogeno 1,2,3‐Triazoles and Their 5‐Substituted Derivatives as Glycogen Phosphorylase Inhibitors

Whereas copper‐catalyzed azide–alkyne cycloaddition (CuAAC) between acetylated β‐D ‐glucosyl azide and alkyl or phenyl acetylenes led to the corresponding 4‐substituted 1‐glucosyl‐1,2,3‐triazoles in good yields, use of similar conditions but with 2 equiv CuI or CuBr led to the 5‐halogeno analogues (>71 %). In contrast, with 2 equiv CuCl and either propargyl acetate or phenyl acetylene, the major products (>56 %) displayed two 5,5′‐linked triazole rings resulting from homocoupling of the 1‐glucosyl‐4‐substituted 1,2,3‐triazoles. The 4‐phenyl substituted compounds (acetylated, O‐unprotected) and the acetylated 4‐acetoxymethyl derivative existed in solution as a single form (d.r.>95:5), as shown by NMR spectroscopic analysis. The two 4‐phenyl substituted structures were unambiguously identified for the first time by X‐ray diffraction analysis, as atropisomers with aR stereochemistry. This represents one of the first efficient and highly atropodiastereoselective approaches to glucose‐based bis‐triazoles as single atropisomers. The products were purified by standard silica gel chromatography. Through Sonogashira or Suzuki cross‐couplings, the 1‐glucosyl‐5‐halogeno‐1,2,3‐triazoles were efficiently converted into a library of 1,2,3‐triazoles of the 1‐glucosyl‐5‐substituted (alkynyl, aryl) type. Attempts to achieve Heck coupling to methyl acrylate failed, but a stable palladium‐associated triazole was isolated and analyzed by ¹H NMR and MS. O‐Unprotected derivatives were tested as inhibitors of glycogen phosphorylase. The modest inhibition activities measured showed that 4,5‐disubstituted 1‐glucosyl‐1,2,3‐triazoles bind weakly to the enzyme. This suggests that such ligands do not fit the catalytic site or any other binding site of the enzyme.     

One‐Pot Synthesis of 4‐Aryl‐NH‐1,2,3‐Triazoles through Three‐Component Reaction of Aldehydes,Nitroalkanes and NaN3

A one‐pot three‐component reaction of aldehydes, nitroalkanes and NaN₃ for the synthesis of NH ‐1,2,3‐triazoles has been developed. The reaction provides a safe, efficient and step‐economic approach for the synthesis of various NH ‐1,2,3‐triazoles in good to excellent yields.     

An Efficient Synthesis of Mono and Bis‐1,2,3‐triazole AZT Derivatives via Copper(I)‐catalyzed Cycloaddition

An efficient synthesis of novel mono and bis‐1,2,3‐triazoles 3′‐azido‐2′‐deoxythymidine (AZT) derivatives via copper(I)‐catalyzed 1,3‐dipolar cycloaddition reaction is described. Starting from AZT and terminal alkyne derivatives, mono and bis‐1,2,3‐triazole AZT derivatives are regioselectively obtained in good yields under mild conditions using CuSO4·5H2O and sodium ascorbate as a catalyst system, and t‐BuOH/H₂O (1:1, v/v) as a co‐solvent. The structures of these compounds were elucidated by IR, HR MS and NMR.     

Benedict's solution/ vitamin C: An alternative catalytic protocol for the synthesis of regioselective‐1,4‐disubstituted‐1H‐1,2,3‐triazoles at room temperature

A novel and highly efficient method for the synthesis of 1,4‐disubstituted‐1H‐1,2,3‐triazoles by copper‐catalyzed azide‐alkyne cycloaddition has been developed. This economic and sustainable protocol uses a readily available Benedict's solution/Vitamin C catalyst system affording a wide range of 1,4‐disubstituted‐1H‐1,2,3‐triazoles under mild conditions.     

Cu(I)‐Catalyzed Regioselective and Highly Efficient One‐Pot Synthesis of Novel 1,2,3‐Triazoles Decorated with Pyridine and Heterocyclic Amines

An efficient one‐pot synthesis of 1,2,3‐triazoles via the three‐component coupling reaction between propargyl bromide, secondary amines, and 3‐azidopyridine in the presence of CuI as catalyst has been presented. The reaction is highly regioselective and afforded novel 1,4‐disubstituted‐1,2,3‐triazoles in excellent yields by the [3 + 2] Huisgen cycloaddition reaction. This method avoids isolation and handling of terminal acetylenes. The ease of purification has made this methodology clean and safe for the synthesis of 1,2,3‐triazoles with a broad scope.     

One‐Pot,Three‐Component Synthesis of 1‐(2‐Hydroxyethyl)‐1H‐1,2,3‐triazole Derivatives by Copper‐Catalyzed 1,3‐Dipolar Cycloaddition of 2‐Azido Alcohols and Terminal Alkynes under Mild Conditions in Water

A safe, efficient, and improved procedure for the regioselective synthesis of 1‐(2‐hydroxyethyl)‐1H‐1,2,3‐triazole derivatives under ambient conditions is described. Terminal alkynes reacted with oxiranes and NaN₃ in the presence of a copper(I) catalyst, which is prepared by in situ reduction of the copper(II) complex 4 with ascorbic acid, in H₂O. The regioselective reactions exclusively gave the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazoles in good to excellent yields. This procedure avoids the handling of organic azides as they are generated in situ, making this already powerful click process even more user‐friendly and safe. The remarkable features of this protocol are high yields, very short reaction times, a cleaner reaction profile in an environmentally benign solvent (H₂O), its straightforwardness, and the use of nontoxic catalysts. Furthermore, the catalyst could be recovered and recycled by simple filtration of the reaction mixture and reused for ten consecutive trials without significant loss of catalytic activity. No metal‐complex leaching was observed after the consecutive catalytic reactions.     

Claycop/hydrazine: A new and highly efficient recyclable/reusable catalytic system for 1,4‐disubstituted‐1,2,3‐triazole synthesis under solvent‐free conditions

Clay‐supported copper(II) nitrate (claycop) has been used as an efficient catalyst for azide–alkyne cycloaddition reactions leading to 1,4‐disubstituted 1,2,3‐triazoles. The highly efficient claycop/hydrazine hydrate catalytic system affords triazoles in a few minutes (1–20 min) at room temperature, under mild and solvent‐free conditions. High regioselectivity, excellent yields, ease of claycop synthesis and recyclability/reusability of the catalyst are considered as practical merits of the protocol.     

An Efficient Copper‐Catalyzed One‐Pot Synthesis of 1‐Aryl‐1,2,3‐triazoles from Arylboronic Acids in Water under Mild Conditions

A convenient method for one‐pot two‐step 1,3‐dipolar cycloadditon reaction of arylboronic acid, sodium azide followed with terminal alkynes in the presence of 2‐pyrrolecarbaldiminato‐Cu(II) complexes catalyst is reported. Various 1‐aryl‐1,2,3‐triazoles were prepared in 63%–97% yields in water at 30°C without any additives and avoiding the isolation of unstable aryl azides.     

A Novel ‘Domino‐Click Approach’ to Unsymmetrical Bis‐1H‐1,2,3‐triazoles

Aryl azides 1 were treated with allenylmagnesium bromide ( 2 ) to generate 1,5‐disubstituted butynyl‐1H‐1,2,3‐triazoles 3 in a domino fashion, which upon Cu^I‐catalyzed 1,3‐dipolar cycloaddition with aryl azides 4 afforded novel bis‐1H‐1,2,3‐triazoles 5 in quantitative yields (Scheme 1 and Table).     

Rhodium/Silver‐Cocatalyzed Transannulation of N‐Sulfonyl‐1,2,3‐triazoles with Vinyl Azides: Divergent Synthesis of Pyrroles and 2 H‐Pyrazines

The first cyclization reaction between vinyl azides and N‐sulfonyl‐1,2,3‐triazoles is reported. A Rh/Ag binary metal catalyst system proved to be necessary for the successful cyclization. By varying the structure of vinyl azides, such reaction allows the divergent synthesis of pyrroles and 2H‐pyrazines. The cyclization reactions feature a broad substrate scope, good functional group tolerance, high reaction efficiency, and good to high product yields.     

Copper(I) and palladium nanoparticles supported on ethylenediamine‐functionalized cellulose as an efficient catalyst for the 1,3‐dipolar cycloaddition/direct arylation sequence

Cu(I) and nanoparticles of Pd supported on ethylenediamine‐functionalized cellulose as a novel bio‐supported catalyst was synthesized and characterized. The synthesized catalyst was found to be a highly efficient heterogeneous catalyst for the synthesis of 1,4,5‐trisubstituted 1,2,3‐triazoles through a sustainable 1,3‐dipolar cycloaddition/direct arylation sequence. The catalyst could be easily recovered by simple filtration and reused for at least five cycles without losing its activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Metal‐Free CN‐ and NN‐Bond Formation: Synthesis of 1,2,3‐Triazoles from Ketones,N‐Tosylhydrazines,and Amines in One Pot

A novel synthetic approach toward 1,4‐disubstituted 1,2,3‐triazoles by C?N‐ and N?N‐bond formation has been established under transition‐metal‐free conditions. Complete control of the regioselectivity was successfully achieved. Commercially available anilines, ketones, and N‐tosylhydrazine were treated with molecular iodine in one pot to allow the regioselective generation of 1,4‐disubstituted 1,2,3‐triazoles in high yields without the use of azides.     

Multistep Flow Synthesis of 5‐Amino‐2‐aryl‐2H‐[1,2,3]‐triazole‐4‐carbonitriles

1,2,3‐Triazole has become one of the most important heterocycles in contemporary medicinal chemistry. The development of the copper‐catalyzed Huisgen cycloaddition has allowed the efficient synthesis of 1‐substituted 1,2,3‐triazoles. However, only a few methods are available for the selective preparation of 2‐substituted 1,2,3‐triazole isomers. In this context, we decided to develop an efficient flow synthesis for the preparation of various 2‐aryl‐1,2,3‐triazoles. Our strategy involves a three‐step synthesis under continuous‐flow conditions that starts from the diazotization of anilines and subsequent reaction with malononitrile, followed by nucleophilic addition of amines, and finally employs a catalytic copper(II) cyclization. Potential safety hazards associated with the formation of reactive diazonium species have been addressed by inline quenching. The use of flow equipment allows reliable scale up processes with precise control of the reaction conditions. Synthesis of 2‐substituted 1,2,3‐triazoles has been achieved in good yields with excellent selectivities, thus providing a wide range of 1,2,3‐triazoles.     

An Efficient and Convenient Synthesis of Ethyl 1‐(4‐Methoxyphenyl)‐5‐phenyl‐1H‐1,2,3‐triazole‐4‐carboxylate

The “click chemistry” of using organic azides and terminal alkynes is arguably the most efficient and straightforward route to the synthesis of 1,2,3‐triazoles. In this paper, an alternative and direct access to ethyl 1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐1,2,3‐triazole‐4‐carboxylate is described. Treatment of ethyl diazoacetate with 4‐methoxyaniline derived aryl imines in the presence of 1,8‐diazabicyclo[5.4.0]undec‐7‐ene provided fully substituted 1,2,3‐triazoles in good to high chemical yields. The base‐mediated reaction tolerates various substituted phenyl imines as well as ethyl diazoacetate or the more bulky diazoacetamide. A reasonable mechanism is proposed that involves the addition of an imine nitrogen atom to the terminal nitrogen atom of the diazo compound, followed by aromatization to give the 1,2,3‐triazole. The presence of the 4‐carboxy group is advantageous as it can be easily transformed into other functional groups.     

Use of an efficient polystyrene‐supported cerium catalyst for one‐pot multicomponent synthesis of spiro‐piperidine derivatives and click reactions in green solvent

One‐pot multicomponent reactions are very demanding in synthetic organic chemistry. Here we report a new polystyrene‐supported cerium catalyst (PS‐Ce‐amtp) obtained via an easy two‐step procedure, which was thoroughly characterized using various techniques. PS‐Ce‐amtp catalyses the environmentally benign one‐pot multicomponent synthesis of spiro‐piperidine derivatives through the reaction of substituted aniline, cyclic active methylene compound and formaldehyde at room temperature. The catalyst also exhibits excellent catalytic activity in one‐pot synthesis of 1,4‐disubstituted 1,2,3‐triazoles via click reaction between in situ generated azides (derived from anilines and amines) and terminal alkynes. The catalyst can be recovered easily after reaction and reused five times without significant loss in its catalytic activity. The advantageous features of this catalyst are atom economy, operational simplicity, short reaction times, easy handling and high recycling efficiency.     

Copper@PMO nanocomposites as a novel reusable heterogeneous catalyst for microwave‐assisted green synthesis of β‐hydroxy‐1,2,3‐triazoles through experimental design protocol

A microwave‐assisted multicomponent reaction was used to prepare a series of β‐hydroxy‐1,2,3‐triazoles in the presence of copper@PMO nanocomposites as a catalyst. Box–Behnken design and response surface methodology were used to optimize the influencing parameters such as catalyst content, reaction time and microwave power, being an economical way of obtaining the optimal reaction conditions based on restricted number of experiments. Aqueous reaction medium, easy recovery of catalyst, efficient recycling and high stability of the catalyst render the protocol sustainable and economic. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of Purine‐based Triazoles by Copper (I)‐catalyzed Huisgen Azide–Alkyne Cycloaddition Reaction

An efficient protocol for the synthesis of substituted 1,2,3‐triazol‐9H‐purines via copper (I)‐catalyzed click chemistry of 2,6‐dichloropurine with aromatic azide has been reported. A wide range of 1,4‐disubstituted triazoles ( N‐9 substituted purines) was accessible in good‐to‐excellent yields with remarkable functional group tolerance. The base‐catalyst ratio was tuned to achieve optimum reaction condition (>95% conversion and purity in most cases). Furthermore, the structure of 4i has been unambiguously assigned by X‐ray crystallographic study to yield structural information on the 1,3‐dipoles entering the reaction.     

CuFeO2/tetrabutylammonium bromide catalyzes selective synthesis of 1,4‐disubstituted 1,2,3‐triazoles in neat water at room temperature

A completely green medium including water as a solvent and antiviral CuFeO₂ as a catalyst is described for the synthesis of 1,4‐disubstituted 1,2,3‐triazoles. Excellent yields of products are obtained at room temperature. Cost effectiveness, high stability and high recyclability of CuFeO₂ along with antiviral properties of the catalyst make it a unique catalyst for cycloadditions of phenylacetylene with a wide variety of aryl halides. Copyright © 2016 John Wiley & Sons, Ltd.     

Facile One‐Pot Synthesis of Monosubstituted 1‐Aryl‐1H‐1,2,3‐triazoles from Arylboronic Acids and Prop‐2‐ynoic Acid (=Propiolic Acid) or Calcium Acetylide (=Calcium Carbide) as Acetylene Source

The synthesis of monosubstituted 1‐aryl‐1H‐1,2,3‐triazoles was achieved in a one‐pot reaction from arylboronic acids and prop‐2‐ynoic acid or calcium acetylide (=calcium carbide), respectively, as a source of acetylene, with yields ranging from moderate to excellent (Scheme 1, Table 2). The reaction conditions were successfully applied to arylboronic acids, including analogs with various functionalities. Unexpectedly, the 1,2,3‐triazole moiety promoted a regioselective hydrodebromination (Scheme 2).     

Pd‐NHC‐Catalyzed Direct Arylation of 1,4‐Disubstituted 1,2,3‐Triazoles with Aryl Halides

A highly efficient method for the synthesis of unsymmetrical multi‐substituted 1,2,3‐triazoles via a direct Pd‐NHC system catalyzed C(5)‐arylation of 1,4‐disubstituted triazoles, which are readily accessible via "click" chemistry has been developed. It is important to note that C? H bond functionalizations of 1,2,3‐triazoles with a variety of differently substituted aryl iodides and bromides as electrophiles can be conveniently achieved through this catalytic system at significantly milder reaction temperatures of 100°C under air.