Magnetic carbon nanotube‐supported imidazolium cation‐based ionic liquid as a highly stable nanocatalyst for the synthesis of 2‐aminothiazoles

Magnetic carbon nanotube‐supported imidazolium ionic liquid (CNT‐Fe₃O₄‐IL) was synthesized and investigated using various characterization techniques, including Fourier transform infrared and Raman spectroscopies, X‐ray diffraction, vibrating sample magnetometry, scanning and transmission electron microscopies, and thermogravimetric and differential thermal analyses. In order to synthesize the CNT‐Fe₃O₄‐IL nanocomposites, Fe₃O₄‐decorated multi‐walled CNTs were modified with 1‐methyl‐3‐(3‐trimethoxysilylpropyl)‐1H‐imidazol‐3‐ium chloride. This catalytic system was found to be a highly stable, active, reusable and solid‐phase catalyst for the synthesis of 2‐aminothiazoles via the one‐pot reaction of ketone, thiourea and N‐bromosuccinimide under mild conditions. Immobilized magnetic ionic liquid catalysis combines the advantages of ionic liquid media with magnetic solid support nanomaterials which enables the application of nanotechnology and green chemistry in chemical processes. Copyright © 2016 John Wiley & Sons, Ltd.     

The first urea‐based ionic liquid‐stabilized magnetic nanoparticles: an efficient catalyst for the synthesis of bis(indolyl)methanes and pyrano[2,3‐d]pyrimidinone derivatives

Urea‐based ionic liquid stabilized on silica‐coated Fe₃O₄ magnetic nanoparticles, {Fe₃O₄@SiO₂@(CH₂)₃‐Urea‐SO₃H/HCl}, as an unexceptionable and smooth releasing urea fertilizer in alkali soils was synthesized and fully characterized using Fourier transform infrared, UV–visible and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, scanning and transmission electron microscopies, atomic force microscopy and thermogravimetric analysis. The nanostructure catalyst as a novel, green and efficient catalyst was applied for the synthesis of bis(indolyl)methane derivatives via the condensation reaction between 2‐methylindole and aldehydes at room temperature under solvent‐free conditions. Also, pyrano[2,3‐d]pyrimidinone derivatives were prepared in the presence of the nanomagnetic urea‐based catalyst by the one‐pot three‐component condensation reaction of 1,3‐dimethylbarbituric acid, aldehydes and malononitrile under solvent‐free conditions at 60 °C. To the best of our knowledge, this is the first report of the synthesis of urea‐based ionic liquid stabilized on silica‐coated Fe₃O₄ magnetic nanoparticles. So the present work can open up a new and promising insight in the course of rational design, synthesis and applications of task‐specific fertilizer‐based nanomagnetic ionic liquids with desirable properties as unexceptionable substances for sustainable processes. Copyright © 2016 John Wiley & Sons, Ltd.     

N‐(3‐silyl propyl) diethylene triamine N,N',N'‐tri‐sulfonic acid immobilized on Fe3‐xTixO4 magnetic nanoparticles: A new recyclable heterogeneous nanocatalyst for the synthesis of hexahydroquinolines

In the present study, for the first time N‐(3‐silyl propyl) diethylene triamine N,N',N''‐tri‐sulfonic acid (SPDETATSA) was grafted on magnetic Fe_3‐xTi_xO₄ nanoparticles. The structure of the resulted nanoparticles was characterized based on Fourier‐transform infrared (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), and vibrating sample magnetometer (VSM) analyses. The results confirmed the successful immobilization of sulfamic acid groups onto the magnetic support. These nanoparticles exhibited high catalytic activity as novel magnetically recyclable acid nanocatalyst in the synthesis of a diverse range of hexahydroquinolines through one‐pot tandem reactions in excellent yields. Also, this nanocatalyst performed satisfactory catalytic maintenance of activity for the synthesis of the reaction products after 4 rounds of recycling with no considerable loss of activity.     

Chloroaluminate ionic liquid‐modified silica‐coated magnetic nanoparticles: Efficient and reusable catalyst for selective synthesis of mono‐ and bis‐dihydropyrano[3,2‐b]chromenediones

The synthesis, characterization and catalytic activity of chloroaluminate ionic liquid‐modified silica‐coated magnetic nanoparticles ([SiPrPy]AlCl₄@MNPs) are described. The prepared magnetic nanocatalyst was characterized using Fourier transform infrared spectroscopy, elemental analysis, vibrating sample magnetometry, scanning and transmission electron microscopies, X‐ray diffraction and inductively coupled plasma analysis. The results showed that the ionic liquid had been successfully immobilized onto the magnetic support, and the resulting nanoparticles exhibited high catalytic activity for the synthesis of a diverse range of dihydropyrano[3,2‐b ]chromenediones via a one‐pot, three‐component and solvent‐free reaction of aromatic aldehydes, 1,3‐diones and kojic acid. This catalytic system also showed excellent activity in the selective synthesis of mono‐ and bis‐dihydropyrano[3,2‐b ]chromenediones from dialdehydes. The procedure gave the products in excellent yields and in very short reaction times. Moreover, the catalyst could be reused eight times without loss of its catalytic activity.     

Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

Fe3O4@L‐arginine magnetic nanoparticles: A novel and magnetically retrievable catalyst for the synthesis of 1′3‐diaryl‐2N‐azaphenalene

The catalytic activity of l ‐arginine‐coated nano‐Fe₃O₄ particles (Fe₃O₄@l ‐arginine) proves they are a novel magnetic catalyst without the use of heat and reflux for the synthesis of 1,3‐diaryl‐2‐N‐azaphenalene derivatives and n‐acyl‐1,3‐diaryl‐2‐N‐azaphenylene derivatives in a one‐pot pseudo‐five‐component condensation reaction of compounds of 2,7‐naphthalene diol, aldehydes, and ammonia derivatives (ammonium acetate or ammonium hydrogen phosphate) and solvent (water and alcohol) with high yield and short reaction times, economical, and simple workup. The structure and magnetic properties of the obtained nanoparticles were characterized via Fourier transform infrared spectroscopy (IR) and field emission scanning electron microscopy (FE‐SEM). The results demonstrated that the average size of the synthesized magnetite nanoparticles is about 21 nm. In addition, the heterogeneous catalyst can be easily recovered magnetically and can be reused for further runs without significant loss of its catalytic activity.     

Cu(I)@Fe3O4 nanoparticles supported on imidazolium‐based ionic liquid‐grafted cellulose: Green and efficient nanocatalyst for multicomponent synthesis of N‐sulfonylamidines and N‐sulfonylacrylamidines

A novel heterogeneous nanocatalyst was fabricated by depositing copper iodide and Fe₃O₄ nanoparticles on imidazolium‐based ionic liquid‐grafted cellulose and successfully characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, powder X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry and flame atomic absorption spectrometry. It was employed to catalyse the reaction of terminal acetylenes with sulfonyl azides to afford highly reactive sulfonyl ketenimine intermediates which were subsequently trapped by secondary amines to give N ‐sulfonylamidines and N ‐sulfonylacrylamidines under solvent‐free conditions at room temperature. Good to excellent yields, very short reaction times, eco‐friendly processing, easy separation and reusability without significant loss of catalytic activity were found to be the notable features of this synthetic protocol.     

Magnetic solid‐phase extraction based on a polydopamine‐coated Fe3O4 nanoparticles absorbent for the determination of bisphenol A,tetrabromobisphenol A, 2,4,6‐tribromophenol,and (S)‐1,1’‐bi‐2‐naphthol in environmental waters by HPLC

Polydopamine‐coated Fe₃O₄ magnetic nanoparticles synthesized through a facile solvothermal reaction and the self‐polymerization of dopamine have been employed as a magnetic solid‐phase extraction sorbent to enrich four phenolic compounds, bisphenol A, tetrabromobisphenol A, (S)‐1,1′‐bi‐2‐naphthol and 2,4,6‐tribromophenol, from environmental waters followed by high‐performance liquid chromatographic detection. Various parameters of the extraction were optimized, including the pH of the sample matrix, the amount of polydopamine‐coated Fe₃O₄ sorbent, the adsorption time, the enrichment factor of analytes, the elution solvent, and the reusability of the nanoparticles sorbent. The recoveries of these phenols in spiked water samples were 62.0–112.0% with relative standard deviations of 0.8–7.7%, indicating the good reliability of the magnetic solid‐phase extraction with high‐performance liquid chromatography method. In addition, the extraction characteristics of the magnetic polydopamine‐coated Fe₃O₄ nanoparticles were elucidated comprehensively. It is found that there are hydrophobic, π–π stacking and hydrogen bonding interactions between phenols and more dispersible polydopamine‐coated Fe₃O₄ in water, among which hydrophobic interaction dominates the magnetic solid‐phase extraction performance.     

Ionic‐liquid‐modified magnetic nanoparticles as a solid‐phase extraction adsorbent coupled with high‐performance liquid chromatography for the determination of linear alkylbenzene sulfonates in water samples

Novel ionic‐liquid‐functionalized Fe₃O₄ magnetic nanoparticles were synthesized by the thiol‐ene click reaction. The prepared functionalized Fe₃O₄ nanoparticles possessed multiple interactions, such as electrostatic, hydrophobic, and π–π interactions. The functionalized Fe₃O₄ nanoparticles were characterized by using Fourier transform infrared spectroscopy, X‐ray diffraction, vibrating sample magnetometry, and transmission electron microscopy. Four kinds of linear alkylbenzene sulfonates, namely, sodium decylbenzenesulfonate, sodium undecylbenzene sulfonate, sodium dodecylbenzenesulfonate, and sodium tridecylbenzenesulfonate, were selected as model compounds to evaluate the applicability of adsorbents for extraction and subjected to high‐performance liquid chromatography analysis. In addition, the effects of various parameters, such as sorbent amount, pH value, ionic strength, sample volume, extraction time, and elution conditions on extraction efficiency were studied in detail. Under the optimum conditions, good linearities were attained, with correlation coefficients between 0.9912 and 0.9968. The proposed method exhibited limits of detection ranging from 0.061 to 0.099 μg/L for all the target analytes. The spiked recoveries of the target analytes in real water samples ranged from 86.3 to 107.5%, with relative standard deviations lower than 7.96%. The enrichment factors of the analytes ranged from 364 to 391, indicating that the obtained functionalized Fe₃O₄ nanoparticles can effectively extract trace target analytes from environmental water samples.     

Synthesis of trans‐dihydrofurans using bis (1(3‐trimethoxysilylpropyl)‐3‐methyl‐imidazolium) nickel tetrachloride tethered to colloidal silica nanoparticles

An efficient multicomponent synthesis of dihydrofurans is described by a one‐pot condensation reaction of 4‐bromophenacyl bromide, aromatic aldehydes, and dimedone using an ionic liquid tethered to colloidal silica nanoparticles under reflux conditions in acetonitrile. The ionic liquid tethered to colloidal silica nanoparticles is characterized by ¹H NMR spectroscopy, scanning electron microscopy, energy‐dispersive spectroscopy, thermogravimetric analysis, and dynamic light scattering. Atom economy, a wide range of products, high catalytic activity, excellent yields in short reaction times, diastereoselective synthesis, reusability of the catalyst, and low catalyst loading are some of the important features of this protocol.     

Enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives by Fe3O4@PS‐arginine as an efficient chiral magnetic nanocatalyst

A novel chiral magnetic nanocatalyst was prepared by the surface modification of Fe₃O₄ magnetic nanoparticles (MNPs) with a chloropropylsilane and further by arginine to form Fe₃O₄@propylsilan‐arginine (Fe₃O₄@PS‐Arg). After the structural confirmation of Fe₃O₄@PS‐Arg synthesized MNPs by Fourier transform‐infrared, X‐ray diffraction, field emission‐scanning electron microscopy, transmission electron microscopy, vibrating‐sample magnetometry and thermogravimetric analyses, their catalytic activity was evaluated for one‐pot enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives. The results showed that in the presence of 0.07 g Fe₃O₄@PS‐Arg nanocatalyst and ethanol as solvent, the best reaction yield (96%) was obtained in the least time (5 min). Easy operation, reusability and stability, short reaction time, high reaction yields and good enantioselectivity are the major advantages of the newly synthesized nanocatalyst. Also, this study provides a novel strategy for further research and investigation on the synthesis of new reusable enantioselective catalysts and chiral compounds.     

A new nano‐Fe3O4‐supported organocatalyst based on 3,4‐dihydroxypyridine: an efficient heterogeneous nanocatalyst for one‐pot synthesis of pyrazolo[3,4‐b]pyridines and pyrano[2,3‐d]pyrimidines

A simple and practical strategy for the synthesis of a novel nano‐Fe₃O₄‐supported organocatalyst system based on 3,4‐dihydroxypyridine (Fe₃O₄/Py) has been developed. The prepared catalyst was characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopies, X‐ray diffraction, vibrating sample magnetometry and energy‐dispersive X‐ray analysis. Accordingly, the Fe₃O₄/Py nanoparticles show a superparamagnetic property with a saturation magnetization of 61 emu g^?1, indicating potential application in magnetic separation technology. Our experimental results reveal that the pyridine‐functionalized Fe₃O₄ nanoparticles are an efficient base catalyst for the domino condensation of various aromatic aldehydes, Meldrum's acid and 5‐methylpyrazol‐3‐amine under very mild reaction condition and in the presence of ethanol solvent. Moreover, the synthesized catalyst was used for one‐pot, three‐component condensation of aromatic aldehydes with barbituric acid and malononitrile to produce 7‐amino‐2,4‐dioxo‐5‐phenyl‐2,3,4,5‐tetrahydro‐1H‐pyrano[2,3‐d]pyrimidine‐6‐carbonitriles. All reactions are completed in short times and all products are obtained in good to excellent yields. Also, notably, the catalyst was reused five times without significant degradation in catalytic activity and performance. Copyright © 2016 John Wiley & Sons, Ltd.     

Dispersive liquid–liquid microextraction based on amine‐functionalized Fe3O4 nanoparticles for the determination of phenolic acids in vegetable oils by high‐performance liquid chromatography with UV detection

A novel dispersive liquid–liquid microextraction method based on amine‐functionalized Fe₃O₄ magnetic nanoparticles was developed for the determination of six phenolic acids in vegetable oils by high‐performance liquid chromatography. Amine‐functionalized Fe₃O₄ was synthesized by a one‐pot solvothermal reaction between Fe₃O₄ and 1,6‐hexanediamine and characterized by transmission electron microscopy and Fourier transform infrared spectrophotometry. A trace amount of phosphate buffer solution (extractant) was adsorbed on bare Fe₃O₄‐NH₂ nanoparticles by hydrophilic interaction to form the “magnetic extractant”. Rapid extraction could be achieved while the “magnetic extractant” on amine‐functionalized Fe₃O₄ nanoparticles was dispersed in the sample solution by vortexing. After extraction, the “magnetic extractant” was collected by application of an external magnet. Some important parameters, such as pH and volume of extraction and desorption solvents, the extraction and desorption time needed were carefully investigated and optimized to achieve the best extraction efficiency. Under the optimal conditions, satisfactory extraction recoveries were obtained for the six phenolic acids in the range of 84.2–106.3%. Relative standard deviations for intra‐ and inter‐day precisions were less than 6.3 and 10.0%, respectively. Finally, the established method was successfully applied for the determination of six phenolic acids in eight kinds of vegetable oils.     

Application of 1‐methyl imidazole‐based ionic liquid‐stabilized silica‐coated Fe3O4 as a novel modified magnetic nanocatalyst for the synthesis of pyrano[2,3‐d]pyrimidines

1‐Methyl imidazole‐based ionic liquid‐stabilized silica‐coated Fe₃O₄ magnetic nanoparticles [Fe₃O₄@SiO₂@(CH₂)₃‐1‐methyl imidazole]HSO₄ as a solid acid magnetic nanocatalyst was explored in the synthesis of pyrano[2,3‐d]pyrimidine derivatives. Pyrano[2,3‐d]pyrimidine derivatives were synthesized by a highly efficient three‐component reaction of various benzaldehydes, malononitrile, and barbituric acid. The catalyst was characterized by using various analysis techniques such as Fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), differential scanning calorimetry‐thermogravimetry analysis (DSC‐TGA), scanning electron microscopy (SEM), and vibrating sample magnetometry (VSM).     

Synthesis and application of novel 1,2,3‐triazolylferrocene‐containing ionic liquid supported on Fe3O4 nanocatalyst in the synthesis of new pyran‐substituted Betti bases

A novel magnetic ferrocene‐labelled ionic liquid based on triazolium, [Fe₃O₄@SiO₂@Triazol‐Fc][HCO₃], has been synthesized and has been successfully introduced as a recyclable heterogeneous nanocatalyst. The catalytic activity of the novel magnetic nanoparticles was evaluated in the one‐pot three‐component synthesis of a wide variety of Betti bases. A simple, facile and highly efficient green method has been developed for the synthesis of kojic acid‐containing Betti base derivatives at room temperature. Additionally, this new protocol has notable advantages such as short reaction times, green reaction conditions, high yields and simple workup and purification steps. Also, the novel nanocatalyst could be easily recovered using an external magnetic field and reused for six consecutive reaction cycles without significant loss of activity. The newly synthesized nanocatalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, field emission scanning electron microscopy, transmission electron microscopy and Brunauer–Emmett–Teller measurements.     

γ‐Fe2O3@Cu3Al‐LDH‐TUD as a new Amphoteric,Highly Efficient and Recyclable Heterogeneous Catalyst for the Solvent‐free Synthesis of Dihydropyrano[3,2‐c]pyrazoles and dihydropyrano[3,2‐c]chromens

Thiourea dioxide was immobilized on γ‐Fe₂O₃@Cu₃Al‐LDH magnetic nanoparticles to prepare the γ‐Fe₂O₃@Cu₃Al‐LDH‐TUD MNPs. The structure and properties of these magnetic nanoparticles were established by FT‐IR, EDX, SEM, XRD, and hystogram of particle size analytical methods. The results obtained from these analytical methods confirmed the successful immobilization of the thiourea dioxide onto the magnetic support. The synthesized magnetic nanoparticles (MNPs) exhibited high catalytic activity in one‐pot three‐component reactions under mild and solvent‐free conditions for the synthesis of diverse ranges of dihydropyrano[3,2‐c]pyrazoles and dihydropyrano[3,2‐c]chromens. All the reactions proceeded smoothly to furnish the respective products in excellent yields. Simple isolation of the products, avoidance of harmful organic solvents, versatility of the catalyst and its easy magnetic separation and reusability with no significant loss of activity are the main advantages of the present method.     

Novel ionic liquid supported on Fe3O4 nanoparticles as an efficient catalyst for the synthesis of new chromenes

An efficient procedure for the synthesis of new chromenes by the multicomponent reaction of aldehydes, 4‐hydroxycoumarin and 2‐hydroxynaphthalene‐1,4‐dione in the presence of an ionic liquid supported on Fe₃O₄ nanoparticles is described. The ionic liquid supported on Fe₃O₄ nanoparticles as a magnetic catalyst gives products in high yields. Significant features of this method are: short reaction times, excellent yields, green method and use of an effective catalyst that can be recovered and reused many times without loss of its catalytic activity.     

CuI/Fe3O4 NPs@Biimidazole IL‐KCC‐1 as a leach proof nanocatalyst for the synthesis of imidazo[1,2‐a]pyridines in aqueous medium

In the present work, an innovative leach proof nanocatalyst based on dendritic fibrous nanosilica (DFNS) modified with ionic liquid loaded Fe₃O₄ NPs and CuI salts was designed and applied for the rapid synthesis of imidazo[1,2‐a]pyridines from the reaction of phenyl acetylene, 2‐aminopyridine, and aldehydes in aqueous medium. The structure of the synthesized nanocatalyst was studied by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Fourier transform infrared (FT‐IR), flame atomic absorption spectroscopy (FAAS), energy‐dispersive X‐ray (EDX), and X‐ray diffraction (XRD), vapor–liquid–solid (VLS), and adsorption/desorption analysis (Brunauer–Emmett–Teller [BET] equation) instrumental techniques. CuI/Fe₃O₄NPs@IL‐KCC‐1 with high surface area (225 m² g^?1) and porous structure not only exhibited excellent catalytic activity in aqueous media but also, with its good stability, simply recovered by an external magnet and recycled for eight cycles without significant loss in its intrinsic activity. Higher catalytic activity of CuI/Fe₃O₄NPs@IL‐KCC‐1 is due to exceptional dendritic fibrous structure of KCC‐1 and the ionic liquid groups that perform as strong anchors to the loaded magnetic nanoparticles (MNPs) and avoid leaching them from the pore of the nanocatalyst. Green reaction media, shorter reaction times, higher yields (71–97%), easy workup, and no need to use the chromatographic column are the advantages of the reported synthetic method.     

Fe3O4@SiO2@Im‐bisethylFc [HC2O4] as a novel recyclable heterogeneous nanocatalyst for synthesis of bis‐coumarin derivatives

Nanomagnetic bisethylferrocene‐containing ionic liquid supported on silica‐coated iron oxide (Fe₃O₄@SiO₂@Im‐bisethylFc [HC₂O₄]) as a novel catalyst was designed and synthesized. The described catalyst was recycled and used without change in the time and efficiency of the condensation reaction. The Fourier transform‐infrared spectroscopy (FT‐IR), scanning electron microscopy images, X‐ray diffraction patterns, energy‐dispersive X‐ray spectroscopy, transmission electron microscope and vibrating‐sample magnetometer results confirmed the formation of Fe₃O₄@SiO₂@Im‐bisethylFc [HC₂O₄] magnetic nanoparticle. The novel bis‐coumarin derivatives were identified by ¹H‐NMR, ¹³C‐NMR, FT‐IR and CHNS analysis.