Natural rubber–based composites filled with bioglasses from a CaO‐SiO2‐P2O5‐Ag2O system. Effect of Ag2O concentration in the filler on composite properties

Bioactive glass was first synthesized by L. Hench in 1971. There are many studies on the properties of several metals and metal ions dopants used in the SiO₂‐CaO‐P₂O₅ system of bioglasses, such as Ag, Cu, Zn, and Fe. A number of authors have carried out research related to the influence of silver oxide on the properties of bioglasses . However, publications on the properties of elastomer‐based composites containing bioactive glasses are relatively scarce. We have not found in the literature studies discussing how silver oxide concentration in bioglasses of the CaO‐SiO₂‐P₂O₅‐Ag₂O system affects the significant properties of a natural rubber biocomposite. In this regard, the purpose of the present work is to investigate the aforementioned influence on the properties of this type of composites, namely, vulcanization, physicomechanical, thermal, dynamic, dielectric, electric, and thermoconductive characteristics. We have established those parameters of the composites to be impacted considerably by both degree of filling with bioglass and the silver oxide content in the latter. The improvement in the composites thermostability and some of their physicomechanical performance is the most significant. The volume resistance decreases, and the thermal conductivity coefficients increase. Results from scanning electron microscopy and energy‐dispersive X‐ray (EDX) analyses have confirmed the influence of silver oxide initially on the phase composition of the bioglass, hence on the properties of the biocomposites through changes in the bioglass used as filler. The dielectric characteristics of some of the biocomposites suggest that they can be used as substrates and insulating layers in flexible antennas for short‐range wireless communications.     

Mixed metal MgO–ZrO2 nanoparticle‐catalyzed O‐tert‐Boc protection of alcohols and phenols under solvent‐free conditions

An environmentally benign method for O‐tert‐Boc protection of alcohols and phenols catalyzed by MgO–ZrO₂ nanoparticles under solvent‐free conditions is described. A variety of phenols, alcohols (aliphatic and aromatic) were converted to corresponding O‐tert‐Boc products in good to excellent yield (50–95%). The present protocol is expedient, simple, and efficient under solvent‐free conditions. The MgO–ZrO₂ Nps are easily prepared from inexpensive precursors, and are reusable, recyclable and chemoselective. Copyright © 2012 John Wiley & Sons, Ltd.     

Green synthesis of Fe3O4@SiO2‐Ag magnetic nanocatalyst using safflower extract and its application as recoverable catalyst for reduction of dye pollutants in water

This paper reports the green and in situ preparation of Fe₃O₄@SiO₂‐Ag magnetic nanocatalyst synthesized using safflower (Carthamus tinctorius L.) flower extract without the addition of any stabilizers or surfactants. The catalytic performance of the resulting nanocatalyst was examined for the reduction of 4‐nitrophenol (4‐NP), methylene blue (MB) and methyl orange (MO) in an environment‐friendly medium at room temperature. The main factors such as pH, temperature and amount of catalyst influencing the nanocatalyst performance were studied. The apparent rate constants for 4‐NP, MO and MB reduction were calculated, being 0.756 min^?1, 0.064 s^?1 and 0.09 s^?1, respectively. The catalyst was recovered using an external magnet and reused several times with negligible loss of catalytic activity. The as‐synthesized nanoparticles were characterized using powder X‐ray diffraction, transmission electron microscopy, UV–visible, Fourier transform infrared and inductively coupled plasma atomic emission spectroscopies, dynamic light scattering and vibrating sample magnetometry.     

Antimicrobial,mechanical, barrier,and thermal properties of bio‐based poly (butylene adipate‐co‐terephthalate) (PBAT)/Ag2O nanocomposite films for packaging application

Bio‐based nanocomposites of poly (butylene adipate‐co‐terephthalate) (PBAT)/silver oxide (Ag₂O) were prepared by the composite film casting method using chloroform as the solvent. The prepared Ag₂O at different ratios (1, 3, 5, 7, and 10 wt%) is incorporated in the PBAT. The PBAT nanocomposite films were subjected to structural, thermal, mechanical, barrier, and antimicrobial properties. The electron micrographs indicated uniform distribution of Ag₂O in the PBAT matrix. However, the images indicated agglomeration of Ag₂O particles at 10 wt% loading. The thermal stability of the nanocomposite films increased with Ag₂O content. The tensile strength and elongation of the composite films were found to be higher than those of PBAT and increased with Ag₂O content up to 7 wt%. The PBAT‐based nanocomposite films showed the lower oxygen and water vapor permeability when compared to the PBAT film. Antimicrobial studies were performed against two food pathogenic bacteria, namely, Klebsiella pneumonia and Staphylococcus aureus.     

Synthesis of CuS nanoparticles loaded on activated carbon composite for ultrasound‐assisted adsorption removal of dye pollutants: Process optimization using CCD‐RSM,equilibrium and kinetic studies

In this study, the CuS nanoparticles loaded on activated carbon (CuS‐NPs‐AC) composite was synthesized and then, characterized by XRD and FE‐SEM analyses. The prepared composite was used as a potential adsorbent for the simultaneous ultrasound‐assisted removal of Indigo Carmine (IC) and Safranin‐O (SO). The CuS‐NPs‐AC dose (0.01‐0.03 g), sonication time (1‐5 min), initial SO concentration (5‐15 mg L^‐1) and initial IC concentration (5‐15 mg L^‐1) as expectable effective parameters were studied by central composite design (CCD) under response surface methodology (RSM) to obtain an useful knowledge about the effect of simultaneous interaction between IC and SO on their removal percentage. The optimum SO and IC removal percentages were determined to be 98.24 and 97.15% at pH = 6, 0.03 g of the CuS‐NPs‐AC, 3 min sonication time, 12 and 10 mg L^‐1 of IC and SO. The values of coefficient of determination (R²) for SO and IC were 0.9608 and 0.9796, respectively, indicating the favorable fitness of the experimental data to the second order polynomial regression model. The isotherm data were well correlated with Freundlich model. The maximum monolayer adsorption capacities of 87.5 and 69.90 mg g^‐1 at room temperature for IC and SO in the investigated binary system expressed the high efficiency of the novel adsorbent for water cleanup within a short time. The investigation of correlation between time and rate of adsorption revealed that IC and SO adsorption onto the CuS‐NPs‐AC followed pseudo‐second‐order and intra‐particle diffusion simultaneously.     

Evaluation of UiO‐66 metal organic framework as an effective sorbent for Curcumin's overdose

Metal organic frameworks (MOFs) UiO‐66 (UiO stands for University of Oslo) and NH₂‐UiO‐66 were prepared and characterized as sorbent (antidotal agents) for curcumin (CUR) adsorption. The structure of products were characterized by X‐ray powder diffraction (XRD), Field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), Attenuated Total Reflectance‐Fourier transform infrared spectroscopy (ATR‐FTIR), and N₂ adsorption–desorption measurements. FESEM showed NH₂‐UiO‐66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size distribution. Adsorption capacities of CUR/MOFs with different mass ratios in the feed were investigated in the present study, and this investigation revealed that when the CUR/MOFs with mass ratio was around 0.4, the absorption capacity of NH₂‐UiO‐66 had tended to maximum. Although, functionalization reduced the specific surface area and free volume, introducing polar amine groups could improve the affinity of NH₂‐UiO‐66 respect to CUR. Kinetic studies showed that the kinetic data are well fitted with the pseudo‐ second‐order model. MTT assay revealed that MOFs at the concentration range of 0–560 μg/ml had no cytotoxic effect on the Human Foreskin Fibroblast normal cell line (HFF‐2). These results suggest that these MOFs could be safe as sorbent for adsorb CUR from the body.     

Polyoxometalate immobilized on MOF‐5 as an environment‐friendly catalyst for the synthesis of poly‐functionalized 3‐pyrrolin‐2‐ones

A polyoxometalate immobilized on MOF‐5 (POM/MOF‐5) material has been synthesized and evaluated for the diversity‐oriented synthesis of poly‐functionalized 3‐pyrrolin‐2‐ones via pseudo‐four‐component reaction between dialkyl acetylenedicarboxylate, amines, and aldehyde. The catalyst can be separated from the reaction mixture and reused at least five times with superior activity.     

Novel CuFe2O4@SiO2‐OP2O5H magnetic nanoparticles: Preparation,characterization and first catalytic application to the synthesis of 1,8‐dioxo‐octahydroxanthenes

New functionalized magnetic core–shell nanoparticles, CuFe₂O₄@SiO₂‐OP₂O₅H, were prepared by grafting of phosphorus pentoxide on CuFe₂O₄@SiO₂ nanoparticles and characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, inductively coupled plasma optical emission spectrometry and vibrating sample magnetometry. The catalytic activity of CuFe₂O₄@SiO₂‐OP₂O₅H as a novel catalyst was evaluated in the synthesis of 1,8‐dioxo‐octahydroxanthenes under solvent‐free conditions. The results showed that the catalyst has high activity and the desired products are obtained in high yields within short reaction times. The catalyst is readily recovered using magnetic decantation and can be used at least four times without noticeable deterioration in catalytic activity.     

Investigations of the local distortions and EPR parameters for Cu2+ in xNa2O‐(30–x)K2O‐70B2O3 (5 ≤ x ≤ 25 mol%) glasses

The local distortions and electron paramagnetic resonance parameters for Cu²⁺ in the mixed alkali borate glasses xNa₂O‐(30–x)K₂O‐70B₂O₃ (5 ≤ x ≤ 25 mol%) are theoretically studied with distinct modifier Na₂O compositions x. Owing to the Jahn–Teller effect, the octahedral [CuO₆]¹⁰⁻ clusters show significant tetragonal elongation ratios p ~19% along the C₄ axis. With the increase of composition x, the cubic field parameter Dq and the orbital reduction factor k exhibit linearly and quasi‐linearly decreasing tendencies, respectively, whereas the relative tetragonal elongation ratio p has quasi‐linearly increasing rule with some fluctuations, leading to the minima of g factors at x = 10 mol%. The composition dependences of the optical spectra and the electron paramagnetic resonance parameters are suitably reproduced by the linear or quasi‐linear relationships of the relevant quantities (i.e., Dq, k, and p) with x. The above composition dependences are analyzed from mixed alkali effect, which brings forward the modifications of the local crystal‐fields and the electronic cloud distribution around Cu²⁺ with the variation of the composition of Na₂O.     

Preparation of porous g‐C3N4/Ag/Cu2O: a new composite with enhanced visible‐light photocatalytic activity

From previous reports, graphitic carbon nitride (g‐C₃N₄) can be used as a photocatalyst, although the low efficiency of solar energy utilization, small specific surface area and high recombination rate of photogenerated electron–hole pairs limit its practical application. For the purpose of increasing photocatalytic activity, especially under irradiation of visible light, we successfully synthesized a new composite, namely porous g‐C₃N₄/Ag/Cu₂O, through chemical adsorption of Ag‐doped Cu₂O on porous g‐C₃N₄, which has not been investigated carefully worldwide. The composition, morphology and optical properties of the composite were investigated through methods including X‐ray diffraction, energy‐dispersive X‐ray, Fourier transform infrared, UV–visible and photoluminescence spectroscopies and transmission electron microscopy. Using rhodamine B as organic pollutant to be degraded under the irradiation of visible light, different mass ratios of Ag/Cu₂O doped on porous g‐C₃N₄ led to enhanced photocatalytic performance of the composite compared to pure porous g‐C₃N₄. When the mass ratio of Ag/Cu₂O is 15%, porous g‐C₃N₄/Ag/Cu₂O exhibits a degradation rate 2.015 times higher than that of pure porous g‐C₃N₄. The reasons for this phenomenon may be attributed to the increased utilization efficiency of visible light, high‐speed separation of photogenerated electron–hole pairs, accelerated interfacial transfer process of electrons and increased surface area of the composite. Copyright © 2016 John Wiley & Sons, Ltd.     

Novel Fe3O4/hydroxyapatite/β‐cyclodextrin nanocomposite adsorbent: Synthesis and application in heavy metal removal from aqueous solution

The increased global concern on environmental protection has made researchers focus their attention on new and more efficient methods of pollutant removal. In this research, novel nanocomposite adsorbents,i.e., magnetic hydroxyapatite (Fe₃O₄@HA) and magnetic hydroxyapatite β‐cyclodextrin (Fe₃O₄@HA‐CD) were synthesized and used for heavy metal removal. The adsorbents were characterized by FTIR, XRD, TGA, VSM, and SEM. In order to investigate the effect of β‐cyclodextrin (β‐CD) removal efficiency, adsorption results of nine metal ions were compared for both adsorbents. β‐CD showed the most increasing effect for Cd²⁺ and Cu²⁺ removal, so these two ions were selected for further studies. The effect of diverse parameters including pH, contact time, initial metal ion concentration and adsorbent dosage on the adsorption process was discussed. The optimum pH was 6 and adsorption equilibrium was achieved after 1 hr. Adsorption kinetic data were well fitted by pseudo‐second‐order model proposing that metal ions were adsorbed via chemical reaction. Adsorption isotherm was best described by the Langmuir model, and maximum adsorption capacity for Cd²⁺ and Cu²⁺ was 100.00 and 66.66 (mg/g), respectively. Desorption experiment was also done, and the most efficient eluent used for desorption of metal ions was EDTA (0.001 M) with 91% and 88% of Cd²⁺ and Cu²⁺ release, respectively. Recyclability studies also showed a 19% decrease in the adsorption capacity of the adsorbent after five cycles of regeneration. Therefore, the synthesized adsorbents were recognized as potential candidates for heavy metal adsorption applications.     

Ethylene diamine grafted nanoporous UiO‐66 as an efficient basic catalyst in the multi‐component synthesis of 2‐aminithiophenes

This study demonstrates ED‐UiO‐66 as a novel and effective solid nanoporous basic catalyst prepared through the amine grafting onto the pores of UiO‐66. The manufactured nanoparticles were identified by FT‐IR, XRD, TGA, FESEM, TEM, CHN and BET and the characterization results certified formation of a single phase nanoporous substance with the medium grain size less than 90 nm. The synthesized material was employed as an efficient catalyst for the preparation of 2‐aminotiophenes through the Gewald method. This thermochemically stable nanocatalyst was environmentally safe, reusable and economic. Therefore, this methodology can be simply extended for industrial goals.     

Application of ZnO‐Al2O3 Nanocomposite as Nanocatalyst for Photodegradation of Acid Violet 5B

ZnO‐Al₂O₃ nanocomposite (ZANC) is used as nanocatalyst for photodegradation of acid violet 5B (AV5B) as an industrial dye. The experimental data shows that the degradation of AV5B is accelerated by ZANC and UV light. The effects of various parameters such as pH, hydrogen peroxide and ethanol are investigated on the photodegradation efficiency. Photocatalytic degradation rate of AV5B is increased by ethanol and hydrogen peroxide. Based on the kinetic studies, the rate constant of the photodegradation reaction is estimated 2.829 × 10^‐1 min^‐1.     

A Facile Synthesis of Benzo[h]quinolines via Silica‐TsOH‐P2O5 Promoted Condensation of 1‐Naphthylamines with 1,3‐Diketones under Solvent Free Conditions

A facile synthesis of benzo[h ]quinolines has been developed via improved Combes reaction. A combination of silica gel, p ‐toluenesulfonic acid and phosphorus pentoxide was utilized to promote the condensation of 1‐naphthylamines with 1,3‐diketones under solvent free conditions. In this case, silica gel was used as reaction media, p ‐toluenesulfonic acid and phosphorus pentoxide were acted as catalyst and dehydrating agent, respectively.     

A robust synthesis and characterization of superparamagnetic CoFe2O4 nanoparticles as an efficient and reusable catalyst for green synthesis of some heterocyclic rings

A robust synthesis for magnetic CoFe₂O₄ nanoparticles via a hydrothermal technique was investigated. The prepared magnetic nanoparticles were characterized using powder X‐ray diffraction, scanning, transmission and high‐resolution transmission electron microscopies, energy‐dispersive X‐ray and infrared spectroscopies, thermogravimetric analysis and vibrating sample magnetometry. Based on the obtained data, the prepared powder was composed of ultrafine particles in nanometer size range with highly homogeneous spherical shape and elemental composition. Moreover, the prepared magnetic CoFe₂O₄ nanoparticles were used as an efficient catalyst for green synthesis of tetrahydropyridines and pyrrole derivatives in excellent yields, with easy work‐up and purification of products by non‐chromatographic methods. The catalyst can be recovered for subsequent reactions and reused without any appreciable loss of activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Low Temperature Synthesis and Characterization of Li1.2-y NayV3O8(0≤y≤1.2) from V2O5 Gel

Without overnight heating and stirring,Li1.2V3O8 and its analogs Li1.2-y NayV3O8(0≤y≤1.2) were successfully synthesized by adding mixed solution of LiOH and NaVO3 to V2O5 gel and dehydrating the prepared gel in 150-350℃.The simplicity awards this synthesis process superiority over other low temperature synthesis routes when mass production is concerned.TG-DTA,XRD and TEM experiments were carried out for physical characterization.By galvanostatic charge-discharge and cyclic voltammetry tests,these products showed better electrochemical performance than high temperature products as cathode active materials in secondary lithium batteries.After treatment of Li1.2V3O8 at 250℃,it exhibited a capacity of 350mAh/g when cycled at current rate of about 60 mA/g over the voltage range of 3.8-1.7V vs,Li^ /Li.The influence of partial substitution of Li by Na was also extensively studied.     

Synthesis of Bis‐Thiazolidinones Using Chitosan‐attached Nano‐CuFe2O4 as an Efficient and Retrievable Heterogeneous Catalyst

The preparation of bis‐thiazolidinones has been achieved by a one‐pot condensation reaction of araldehydes, ethylenediamine, and 2‐mercaptoacetic acid in the presence of nano‐CuFe₂O₄@chitosan under reflux conditions in toluene. The catalyst was characterized by powder X‐ray diffraction (XRD), scanning electronic microscopy (SEM), vibrating sample magnetometer (VSM) measurements, thermal gravimetric analysis (TGA), and FT‐IR spectroscopy. This method provides several advantages including excellent yields, wide range of products, reusability of the catalyst, and a low amount of the catalyst.     

CoFe2O4/TMU‐17‐NH2 as a hybrid magnetic nanocomposite catalyst for multicomponent synthesis of dihydropyrimidines

A new magnetic metal–organic framework nanocomposite (CoFe₂O₄/TMU‐17‐NH₂) was prepared via an embedding approach by synthesis of the metal–organic framework crystals in the presence of magnetic cobalt ferrite nanoparticles. We demonstrated that the resulting magnetic nanocomposite can serve as a recyclable nanocatalyst for one‐pot synthesis of bis‐3,4‐dihydropyrimidin‐2(1H)‐one and 3,4‐dihydropyrimidin‐2(1H)‐one derivatives via three‐component reaction of 1,3‐diketone, urea or thiourea and aromatic aldehyde under solvent‐free conditions. CoFe₂O₄/TMU‐17‐NH₂ was characterized using various techniques. The recovery of the nanocomposite was achieved by a simple magnetic decantation and it was reused at least seven times without significant degradation in catalytic activity.     

Magnetic chitosan functionalized with β‐cyclodextrin as ultrasound‐assisted extraction adsorbents for the removal of methyl orange in wastewater coupled with high‐performance liquid chromatography

Three types of choline chloride based deep eutectic solvents were prepared and used to modify magnetic chitosan. The adsorption capacity of the three deep‐eutectic‐solvent‐modified magnetic chitosan/carboxymethyl‐β‐cyclodextrin for removing methyl orange from wastewater was examined. The different deep eutectic solvents were used to strengthen the adsorption capacity of magnetic chitosan. Deep‐eutectic‐solvent‐modified magnetic chitosan/carboxymethyl‐β‐cyclodextrin materials were characterized by Fourier transform infrared spectroscopy and Brunauer–Emmett–Teller surface area measurements. Among the three deep eutectic solvents, choline chloride/glycerol (1:2) modified magnetic chitosan/carboxymethyl‐β‐cyclodextrin showed the highest adsorption capacity to methyl orange. Therefore, choline chloride/glycerol (1:3, 1:4, 1:5, 1:6) deep eutectic solvents were prepared for the assay, and choline chloride/glycerol‐modified magnetic chitosan/carboxymethyl‐β‐cyclodextrin prepared with choline chloride/glycerol (1:3) (volume: 40 μg, contact time: 30 min, and pH: 6) had the best adsorption capacity over the concentration range of 10–200 μg/mL.     

Cobalt‐based metal coordination polymers with 4,4′‐bipyridinyl groups: highly efficient catalysis for one‐pot synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones under solvent‐free conditions

Three new metal coordination complexes, namely [Co(BPY)₂(H₂O)₂](BPY)(BS)₂(H₂O)₄ ( 1 ), [Co(BPY)₂(H₂O)₄](ABS)₂(H₂O)₂ ( 2 ) and [Co(BPY)(H₂O)₄](MBS)₂ ( 3 ) (BPY = 4,4′‐bipyridine, BS = phenylsulfonic acid, ABS = p‐aminobenzenesulfonic acid, MBS = p‐methylbenzenesulfonic acid), were obtained under hydrothermal conditions. Complexes 1 , 2 , 3 were structurally characterized using single‐crystal X‐ray diffraction and infrared spectroscopy. All of them display low‐dimensional motifs: complex 1 displays a two‐dimensional structure; and complexes 2 and 3 exhibit a one‐dimensional tape structure. Through strong intermolecular hydrogen bonding interactions and weak packing interactions, all of them further stack to generate a three‐dimensional supramolecular architecture. Catalysts 1 , 2 , 3 were involved in the green synthesis of a variety of 3,4‐dihydropyrimidin‐2(1H)‐ones under solvent‐free conditions through Biginelli reactions. The corresponding catalytic product was obtained in quantitative yields (99%) under eco‐friendly synthesis conditions for the variety of reactions. Catalysts 1 , 2 , 3 exhibit excellent efficiency for the desired product, and their catalytic performance shows the following order: 2  >  1  ≈  3 , which can be ascribed to the hydrophobic interactions of different phenylsulfonate groups. The catalytic performance for the Biginelli reaction is not only dependent on the selected solvents, but also inversely proportional to the polarities of the solvents. Copyright © 2016 John Wiley & Sons, Ltd.