In Situ Facile Synthesis of Ru‐Based Core–Shell Nanoparticles Supported on Carbon Black and Their High Catalytic Activity in the Dehydrogenation of Amine‐Boranes

Well‐dispersed core–shell Ru@M (M=Co, Ni, Fe) nanoparticles (NPs) supported on carbon black have been synthesized via a facile in situ one‐step procedure under ambient condition. Core‐shell Ru@Co NPs were synthesized and characterized for the first time. The as‐synthesized Ru@Co and Ru@Ni NPs exhibit superior catalytic activity in the hydrolysis of ammonia borane compared with their monometallic and alloy counterparts. The Ru@Co/C NPs are the most reactive, with a turnover frequency (TOF) value of 320 (mol min^?1) mol_Ru^?1 and activation energy (E_a) of 21.16 kJ mol^?1. Ru@Ni/C NPs are the next most active, whereas Ru@Fe/C NPs are almost inactive. Additionally, the as‐synthesized NPs supported on carbon black exhibit higher catalytic activity than catalysts on other conventional supports, such as SiO₂ and γ‐Al₂O₃.     

Synthesis and characterization of antibacterial chromium iron oxide nanoparticle‐loaded activated carbon for ultrasound‐assisted wastewater treatment

The aim of this study was to evaluate the surface adsorption capacity of CrFeO₃ nanoparticle‐loaded activated carbon (CrFeO₃‐NPs–AC) for the removal of a cationic dye (methyl violet, MV). CrFeO₃‐NPs were hydrothermally synthesized and loaded on AC followed by characterization using X‐ray diffraction, field‐emission scanning electron microscopy and energy‐dispersive and Fourier transform infrared spectroscopies. The CrFeO₃‐NPs were tested for in vitro antibacterial activities against Gram‐positive (Staphylococcus aureus) and Gram‐negative (Pseudomonas aeruginosa) bacteria. Minimum inhibitory and minimum bactericidal concentrations of CrFeO₃‐NPs–AC were obtained to be 50 and 100 μg ml^?1, respectively, against S. aureus and 25 and 50 μg ml^?1 against P. aeruginosa. These results indicated the antibacterial properties of CrFeO₃‐NPs–AC. To investigate the adsorption process, several systematic experiments were designed by varying parameters such as adsorbent mass, pH, initial MV concentration and sonication time. The adsorption process was modelled and the optimal conditions were determined to be 0.013 g, 7.4, 15 mg l^?1 and 8 min for adsorbent mass, pH, MV concentration and sonication time, respectively. The real experimental data were found to be efficiently explained by response surface methodology and genetic algorithm model. Kinetic studies for MV adsorption showed rapid sorption dynamics described by a second‐order kinetic model, suggesting a chemisorption mechanism. Then, the experimental equilibrium data obtained at various concentrations of MV and adsorbent masses were fitted to conventional Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models. Dye adsorption equilibrium data were fitted well to the Langmuir isotherm. From the Langmuir model, the maximum monolayer capacity was calculated to be 65.67 mg g^?1 at optimum adsorbent mass.     

Preparation and characterization of novel PES‐(SiO2‐g‐PMAA) membranes with antifouling and hydrophilic properties for separation of oil‐in‐water emulsions

In the present study, modification of nanoparticles (NPs) was investigated to mitigate aggregation of SiO₂ nanoparticles and improve the polymeric membrane's performance. For this purpose, the surface of SiO₂ nanoparticles was activated with amine groups, and polymethacrylic acid (PMAA) was grafted on the surface of NPs by atom transfer radical polymerization. Modified NPs were characterized by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) tests. Polyethersulfone (PES) membranes were fabricated with both SiO₂ and SiO₂‐g‐PMAA NPs via nonsolvent‐induced phase separation method. The fabricated membranes were characterized regarding their permeability, hydrophilicity, and porosity properties, and their separation efficiency was tested using the synthetic oil‐in‐water emulsion. The surface and cross‐sectional morphologies of membranes were observed by field emission scanning electron microscopy (FESEM). The experimental trials showed that modified NPs dispersed more uniformly in the structure of membranes and hydroxyl groups on the surface of NPs acted more effectively. Modification of NPs enhance the membrane performance in terms of permeate flux, hydrophilicity, and porosity. NPs modification improved the permeate flux about 46%. Oil rejection for all tested membranes was more than 98%, and modification of NPs did not reduce the rejection of membranes. The optimum concentration was obtained as 1 wt.% and 1.5 wt.% for SiO₂ and SiO₂‐g‐PMAA, respectively. Aggregation effect dominated at concentrations beyond the optimum values that decreased the permeate flux, consequently.     

Mesoporous Silica‐coated Magnetic Nanoparticles for Mixed Hemimicelles Solid‐phase Extraction of Phthalate Esters in Environmental Water Samples with Liquid Chromatographic Analysis

To extract, preconcentrate and determine the trace level of environmental contaminants, a novel mixed hemimicelles solid‐phase extraction (MHSPE) method based on mesoporous silica‐coated magnetic nanoparticles (Fe₃O₄/meso‐SiO₂ NPs) as adsorbent was developed for extraction of phthalate esters from water samples. The Fe₃O₄/meso‐SiO₂ NPs were synthesized by using a combination of hydrothermal method and sol‐gel method. The obtained Fe₃O₄/meso‐SiO₂ NPs possessed a large surface area (570 m²/g), superparamagnetism, and uniform mesopores (2.8 nm). MHSPE parameters, such as the amount of surfactant, pH of sample, shaking and separation time, eluent and breakthrough volume that may influence the extraction of analytes greatly, were further investigated. Under the optimized conditions, the extraction was completed in 20 min and a concentration factor of 500 was achieved by extracting 250 mL water sample. Detection limits obtained of butyl‐benzyl phthalate (BBP), di‐n‐butyl phthalate (DnBP), di‐(2‐ethylhexyl) phthalate (DEHP) and di‐n‐cotyl phthalate (DnOP) were 12, 21, 12, and 32 ng/L, respectively. The proposed method exhibited high extraction efficiency and relatively short time for extracting the target compounds.     

Triazole‐based ligands functionalized silica: Effects of ligand denticity and donors on catalytic oxidation activity of Pd nanoparticles

Triazole‐based ligands, tris (triazolyl)methanol (Htbtm), bis (triazolyl)‐phenylmethanol (Hbtm), and phenyl (pyridin‐2‐yl)(triazolyl)methanol (Hpytm), with differences in ligand denticity (i.e., bidentate and tridentate) and type of N donors (i.e., triazole and pyridine) were functionalized onto a silica support to produce the corresponding SiO₂‐ L ( L  = tbtm, btm, pytm). Subsequent reactions with Pd (CH₃COO)₂ in CH₂Cl₂ yielded Pd/SiO₂‐ L . ICP‐MS reveals that Pd loadings are higher with increased N loadings, resulting in the following trend: Pd/SiO₂‐tbtm (0.83 mmol Pd g^?1) > Pd/SiO₂‐btm (0.65 mmol Pd g^?1) ~ Pd/SiO₂‐pytm (0.63 mmol Pd g^?1). Meanwhile, TEM images of the used Pd/SiO₂‐ L catalysts after the first catalytic cycle show that the mean size of Pd NPs is highest with Pd/SiO₂‐pytm (8.5 ± 1.5 nm), followed by Pd/SiO₂‐tbtm (6.4 ± 1.6 nm) and Pd/SiO₂‐btm (4.8 ± 1.3 nm). Based on TONs, catalytic studies toward aerobic oxidation of benzyl alcohol to benzaldehyde at 60 °C in EtOH showed that Pd/SiO₂‐pytm possessed the most active surface Pd(0) atoms, most likely as a result of more labile properties of the pyridine–triazole ligand compared to tris‐ and bis (triazolyl) analogs. ICP‐MS and TEM analysis of Pd/SiO₂‐btm indicate minimal Pd leaching and similar average Pd NPs sizes after 1^st and 5^th catalytic runs, respectively, confirming that SiO₂‐btm is an efficient Pd NPs stabilizer. The Pd/SiO₂‐btm catalyst was also active toward aerobic oxidation of various benzyl alcohol derivatives in EtOH and could be reused for at least 7 reaction cycles without a significant activity loss.     

Synthesis,DNA binding,nuclease activity and cytotoxic studies of a wheel‐shaped octanuclear copper(II) complex based on 1,2,4‐triazole

The antitumor activity shown by many platinum complexes has produced a strong interest in research of new organometallic compounds. Among the metal compounds synthesized and tested, copper compounds have received considerable attention because of their cytotoxic activity against solid tumors. A novel wheel‐shaped octanuclear copper(II) complex with a 1,2,4‐triazole derivative ligand formulated as [Cu₈L₄](ClO₄)₈?11H₂O ( 1 ) (L = 3,5‐bis((bis(2‐hydroxylethyl)amino)methyl)‐4 H‐1,2,4,‐triazole‐4‐amine) has been synthesized and structurally characterized. In 1 , eight Cu atoms are linked through 1,2,4‐triazole units and alkoxide bridges to form a centrosymmetric octanuclear Cu(II) metallomacrocycle. The interaction of complex 1 with calf thymus DNA has been studied using UV absorption, fluorescence and circular dichroism spectroscopies, viscosity measurements and cyclic voltammetry. The apparent binding constant (k_app) value for 1 is 1.59 × 10⁵ M^?1. Furthermore, complex 1 displays efficient oxidative cleavage of supercoiled DNA in the presence of external agents, the rate constant for the conversion of supercoiled to nicked DNA being 2.67 × 10^?5 s^?1. Interestingly, cytotoxicity studies on the MCF‐7 human breast cancer cell line show that the IC₅₀ value of 1 is less than that of cisplatin for the same cell line, revealing that it has the potential to act as an effective metal‐based anticancer drug. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and characterization of Ni (II) complexes supported by phenoxy/naphthoxy‐imine ligands with pendant N‐ and O‐donor groups and their use in ethylene oligomerization

A series of new Ni(II) complexes of general formula Ni{ZNO} Br ( 2a‐i ) (ZNO = phenoxy/naphthoxy‐imine with pendant N‐ and O‐donor groups) were prepared and characterized by elemental analysis, IR spectroscopy, ESI‐HRMS, and by X‐ray crystallography for 2e . In the solid state, 2e features a monomeric structure with κ³ coordination of the monoanionic naphthoxy‐imine‐quinoline ligand onto the nickel center. Upon activation with MAO, both classes of nickel catalysts were able to produce selectively 1‐butene (81.5–92.1 wt%) with turnover frequencies (TOFs) varying from 3,100 to 24,300 mol(C₂H₄) mol (Ni)^?1 h^?1. Nickel precatalysts bearing phenoxy‐imine ligands were much more active than its naphthoxy analogous under the same conditions. The use of a mixture of cocatalysts (MAO/TMA or MAO/TiBA) resulted in poor activities; however the presence of TiBA in the milieu led to a significant improvement on selectivity for 1‐hexene (25.5 wt%). Under optimized conditions ([Ni] = 10 μmol, 30 °C, oligomerization time = 5 min, 20 bar ethylene, [Al]/[Ni] = 600), precatalyst 2c led to TOF = 59,900 mol(C₂H₄) mol(Ni)^?1 h^?1 and selectivity for 1‐butene of 89.5 wt%.     

Synthesis of polyethylene‐octene elastomer/SiO2‐TiO2 nanocomposites via in situ polymerization: Properties and characterization of the hybrid

In this study, a silicic acid and tetra isopropyl ortho titanate ceramic precursor and a metallocene polyethylene‐octene elastomer (POE) or acrylic acid grafted metallocene polyethylene‐octene elastomer (POE‐g‐AA) were used in the preparation of hybrids (POE/SiO₂? TiO₂ and POE‐g‐AA/SiO₂? TiO₂) using an in situ sol‐gel process, with a view to identifying a hybrid with improved thermal and mechanical properties. Hybrids were characterized using Fourier transform infrared spectroscopy, ²⁹Si solid‐state nuclear magnetic resonance (NMR), X‐ray diffraction, differential scanning calorimetry, thermogravimetry analysis, dynamic mechanical thermal analysis, and Instron mechanical testing. Properties of the POE‐g‐AA/SiO₂? TiO₂ hybrid were superior to those of the POE/SiO₂? TiO₂ hybrid. This was because the carboxylic acid groups of acrylic acid acted as coordination sites for the silica‐titania phase to allow the formation of stronger chemical bonds. ²⁹Si solid‐state NMR showed that Si atoms coordinated around SiO₄ units were predominantly Q₃ and Q₄. The 10 wt % SiO₂? TiO₂ hybrids gave the maximum values of tensile strength and glass transition temperature in both POE/SiO₂? TiO₂ and POE‐g‐AA/SiO₂? TiO₂. It is proposed that above this wt %, excess SiO₂? TiO₂ particles caused separation between the organic and inorganic phases. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1690–1701, 2005     

Simultaneous removal of Cu2+ and Cr3+ ions from aqueous solution based on Complexation with Eriochrome cyanine‐R and derivative spectrophotometric method

TiO₂ nanoparticles deposited on activated carbon (TiO₂–NP–AC) was prepared and characterized by XRD and SEM analysis. Subsequently, simultaneous ultrasound‐assisted adsorption of Cu²⁺ and Cr³⁺ ions onto TiO₂‐NPs‐AC after complexation via eriochrome cyanine R (ECR) has been investigated with UV–Vis and FAA spectrophotometer. Spectra overlapping of the ECR‐Cu and ECR‐Cr complex was resolve by derivative spectrophotometric technique. The effects of various parameters such as initial Cu²⁺ (A) and Cr³⁺ (B) ions concentrations, TiO₂‐NPs‐AC mass (C), sonication time (D) and pH (E) on the removal percentage were investigated and optimized by central composite design (CCD). The optimize conditions were set as: 4.21 min, 0.019 mg, 20.02 and 13.22 mg L^?1 and 6.63 for sonication time, TiO₂–NP–AC mass, initial Cr³⁺ and Cu²⁺ ions concentration and pH, respectively. The experimental equilibrium data fitting to Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models show that the Langmuir model is a good and suitable model for evaluation and the actual behavior of adsorption process and maximum adsorption capacity of 105.26 and 93.46 mg g^?1 were obtained for Cu²⁺ and Cr³⁺ ions, respectively. Kinetic evaluation of experimental data showed that the adsorption processes followed well pseudo second order and intraparticle diffusion models.     

Novel 13,14‐dimethyl‐5,8‐dioxa‐2,11,13,14‐tetraaza‐1,12‐diphosphabicyclo [10.1.1] tetradecane 1,12‐dioxide ligand and its Ni(II), Co(II), and Cu(II) complexes: Synthesis,characterization, antimicrobial,DNA cleavage,and computational studies

A novel diazadiphosphetidine ligand derived from the reaction of 2,4‐dichloro‐1,3‐dimethyl‐1,3,2,4‐diazadiphosphetidine‐2,4‐dioxide and 2,2′‐(ethane‐1,2‐diylbis[oxy])bis(ethan‐1‐amine) and its Ni(II), Cu(II), and Co(II) complexes have been synthesized, characterized by spectroscopic, elemental analyses, magnetic susceptibility, and conductivity methods, and screened for antimicrobial, DNA binding, and cleavage properties. Spectroscopic analysis and elemental analyses indicate the formula [M(H₂L)Cl₂] for the Cu(II), Co(II), Ni(II), and Zn(II) complexes and octahedral geometry for all the complexes. The non‐electrolytic nature of the complexes in dimethyl sulfoxide (DMSO) was confirmed by their molar conductance values, which are in the range 12.32–6.73 Ω^?1 cm² mol^?1. Computational studies have been carried out at the density functional theory (DFT)‐B3LYP/6‐31G(d) level of theory on the structural and spectroscopic properties of diazadiphosphetidine H₂L and its binuclear Cu(II), Co(II), Ni(II), and Zn(II) complexes. Six tautomers and geometrical isomers of the diazadiphosphetidine ligand were confirmed using semiempirical AM1 and DFT method from DMOL³ calculations. The copper complex had the best antibacterial activity against Staphylococcus aureus (ATCC 29213). DNA cleavage activities of the compounds, evaluated on pBR322 DNA by agarose gel electrophoresis in the presence and absence of an oxidant (H₂O₂) and a free‐radical scavenger (DMSO), indicated no activity for the ligand and moderate activity for the complexes, with the copper complex cleaving pBR322 DNA more efficiently in the presence of H₂O₂.     

Programmed Synthesis by Stimuli‐Responsive DNAzyme‐Modified Mesoporous SiO2 Nanoparticles

DNAzyme‐capped mesoporous SiO₂ nanoparticles (MP SiO₂ NPs) are applied as stimuli‐responsive containers for programmed synthesis. Three types of MP SiO₂ NPs are prepared by loading the NPs with Cy3‐DBCO (DBCO=dibenzocyclooctyl), Cy5‐N₃, and Cy7‐N₃, and capping the NP containers with the Mg²⁺, Zn²⁺, and histidine‐dependent DNAzyme sequences, respectively. In the presence of Mg²⁺ and Zn²⁺ ions as triggers, the respective DNAzyme‐capped NPs are unlocked, leading to the “click” reaction product Cy3‐Cy5. In turn, in the presence of Mg²⁺ ions and histidine as triggers the second set of DNAzyme‐capped NPs is unlocked leading to the Cy3‐Cy7 conjugated product. The unloading of the respective NPs and the time‐dependent formation of the products are followed by fluorescence spectroscopy (FRET). A detailed kinetic model for the formation of the different products is formulated and it correlates nicely with the experimental results.     

Synthesis,crystal structures and DNA/human serum albumin binding of ternary Cu(II) complexes containing amino acids and 6‐(pyrazin‐2‐yl)‐1,3,5‐triazine‐2,4‐diamino

Two water‐soluble 6‐(pyrazin‐2‐yl)‐1,3,5‐triazine‐2,4‐diamino (pzta)‐based Cu(II) complexes, namely [Cu(l ‐Val)(pzta)(H₂O)]ClO₄ ( 1 ) and [Cu(l ‐Thr)(pzta)(H₂O)]ClO₄ ( 2 ) (l ‐Val: l ‐valinate; l ‐Thr: l ‐threoninate), were synthesized and characterized using elemental analyses, molar conductance measurements, spectroscopic methods and single‐crystal X‐ray diffraction. The results indicated that the molecular structures of the complexes are five‐coordinated and show a distorted square‐pyramidal geometry, in which the central copper ions are coordinated to N,N atoms of pzta and N,O atoms of amino acids. The interactions of the complexes with DNA were investigated using electronic absorption, competitive fluorescence titration, circular dichroism and viscosity measurements. These studies confirmed that the complexes bind to DNA through a groove binding mode with certain affinities (K_b = 4.71 × 10³ and 1.98 × 10³ M^?1 for 1 and 2 , respectively). The human serum albumin (HSA) binding properties of the complexes were also evaluated using fluorescence and synchronous fluorescence spectroscopies, indicating that the complexes could quench the intrinsic fluorescence of HSA in a static quenching process. The relevant thermodynamic parameters revealed the involvement of van der Waals forces and hydrogen bonds in the formation of complex–HSA systems. Finally, molecular docking technology was also used to further verify the interactions of the complexes with DNA/HSA.     

Antioxidative vs cytotoxic activities of organotin complexes bearing 2,6‐di‐tert‐butylphenol moieties

Two series of organotin(IV) complexes with Sn–S bonds on the base of 2,6‐di‐tert‐butyl‐4‐mercaptophenol ( L ¹ SH ) of formulae Me₂Sn(L¹S)₂ ( 1 ); Et₂Sn(L¹S)₂ ( 2 ); Bu₂Sn(L¹S)₂ ( 3 ); Ph ₂ Sn(L¹S)₂ ( 4 ); (L¹)₂Sn(L¹S)₂ ( 5 ); Me₃Sn(L¹S) ( 6 ); Ph₃Sn(L¹S) ( 7 ) (L¹ = 3,5‐di‐tert‐butyl‐4‐hydroxyphenyl), together with the new ones [Me₃SnCl(L²)] ( 8 ), [Me₂SnCl₂(L²)₂] ( 9 ) ( L ²  = 2‐(N‐3′,5′‐di‐tert‐butyl‐4′‐hydroxyphenyl)‐iminomethylphenol) were used to study their antioxidant and cytotoxic activity. Novel complexes 8 , 9 of Me_nSnCl_4 ? n (n = 3, 2) with Schiff base were synthesized and characterized by ¹H, ¹³C NMR, IR and elemental analysis. The crystal structures of compounds 8 and 9 were determined by X‐ray diffraction analysis. The distorted tetrahedral geometry around the Sn center in the monocrystals of 8 was revealed, the Schiff base is coordinated to the tin(IV) atom by electrostatic interaction and formation of short contact Sn–O 2.805 Å. In the case of complex 9 the distorted octahedron coordination of Sn atom is formed. The antioxidant activity of compounds as radical scavengers and reducing agents was proved spectrophotometrically in tests with stable radical DPPH, reduction of Cu²⁺ (CUPRAC method) and interaction with superoxide radical‐anion. Moreover, compounds have been screened for in vitro cytotoxicity on eight human cancer cell lines. A high activity against all cell lines with IC₅₀ values 60–160 nM was determined for the triphenyltin complex 7 , while the introduction of Schiff base decreased the cytotoxicity of the complexes. The influence on mitochondrial potential and mitochondrial permeability for the compounds 8 and 9 has been studied. It is shown that studied complexes depolarize the mitochondria but don't influence the calcium‐induced mitochondrial permeability transition.     

New insights into water‐soluble and water‐coordinated copper 15‐metallacrown‐5 gadolinium complexes designed for high‐field magnetic resonance imaging applications

The development of contrast agents specifically designed for high‐field magnetic resonance imaging (MRI) is required because the relaxation efficiency of classic Gd(III) contrast agents significantly decreases with increasing magnetic field strengths. With an idea of exploring the unique structure of lanthanide (Ln) 15‐MC‐5 metallacrowns, we developed a series of water‐soluble Gd(III) aqua‐complexes, bearing aminohydroxamate (glycine, α‐alanine, α‐phenylalanine and α‐tyrosine) ligands, with increasing number of water molecules directly coordinated to the Gd(III) ion: Gd(H₂O)₄[15‐MC_Cu(II)Glyha‐5](Cl)₃ ( 1 (Gd)), Gd(H₂O)₄[15‐MC_Cu(II)Alaha‐5](Cl)₃ ( 2 (Gd)), Gd(H₂O)₃[15‐MC_{Cu(II)Phalaha}‐5](Cl)₃ ( 3 (Gd)) and Gd(H₂O)₃[15‐MC_Cu(II)Tyrha‐5](Cl)₃ ( 4 (Gd)). In these systems, the Ln(III) central ion is coordinated by five oxygen donor atoms of the ligands and three or four inner‐sphere water molecules. The X‐ray crystal structure of metallacrown Ln(H₂O)_3,4[15‐MC_Cu(II)Rha‐5]³⁺ agrees with density functional theory predictions. The calculations demonstrate that the exchange of coordinated water molecules can proceed easily, resulting in increased relaxivity parameters. The longitudinal relaxivities (r₁) of 1 (Gd)– 4 (Gd) in water at ultrahigh magnetic field of 9.4 T were determined to be 11.5, 14.8, 13.9 and 12.2 mM^?1 s^?1, respectively. The ability to increase the number of Ln(III) inner‐sphere water molecules up to four, the planar metallacrown structure and the rich hydration shell due to strong hydrogen bonds between the [15‐MC‐5] moiety and bulk water molecules provide new opportunities for potential MRI applications.     

Three Arene‐Ru(II) compounds of 2‐halogen‐5‐aminopyridine: Synthesis,characterization, and cytotoxicity

Three novel compounds, (η⁶‐p‐cymene)RuCl₂(2‐fluoro‐5‐aminopyridine) (compound 1), (η⁶‐p‐cymene)RuCl₂(5‐amino‐2‐chlorpyridine) (compound 2) and (η⁶‐p‐cymene)RuCl₂(2‐bromo‐ 5‐aminopyridine) (compound 3), were synthesized and characterized. The compound 1 and 3 were determined by X‐ray diffraction, showing a distorted piano‐stool type of geometry with similar bond lengths and angles around the ruthenium. Compound 2 exhibited moderate in vitro activity against A549 and MCF‐7 human cancer cells, the other two lower activities. The UV–vis and fluorescent absorption titrations showed that three compounds binded with CT‐DNA in a minor groove. The intrinsic binding constants (Kb) were calculated to be 2.13(±0.03) × 10⁵ M^?1, 2.89(±0.03) × 10⁵ M^?1 and 2.45(±0.03) × 10⁵ M^?1 for compound 1, 2 and 3, respectively, by using UV–vis absorption titrations data. Among the three compound, the highest value of intrinsic binding constant of compound 2 was consistent with its highest cytoxicity against A549 and MCF‐7 human cancer cells in vitro.     

A Yolk–Shell Structured Silicon Anode with Superior Conductivity and High Tap Density for Full Lithium‐Ion Batteries

The poor cycling stability resulting from the large volume expansion caused by lithiation is a critical issue for Si‐based anodes. Herein, we report for the first time of a new yolk–shell structured high tap density composite made of a carbon‐coated rigid SiO₂ outer shell to confine multiple Si NPs (yolks) and carbon nanotubes (CNTs) with embedded Fe₂O₃ nanoparticles (NPs). The high tap density achieved and superior conductivity can be attributed to the efficiently utilised inner void containing multiple Si yolks, Fe₂O₃ NPs, and CNTs Li⁺ storage materials, and the bridged spaces between the inner Si yolks and outer shell through a conductive CNTs “highway”. Half cells can achieve a high area capacity of 3.6 mAh cm^?2 and 95 % reversible capacity retention after 450 cycles. The full cell constructed using a Li‐rich Li₂V₂O₅ cathode can achieve a high reversible capacity of 260 mAh g^?1 after 300 cycles.     

Optimization and validation of an ion‐pair RP‐HPLC‐UV method for the determination of total free iodine in rabbit plasma: application to a pharmacokinetic study

An ion‐pair reverse‐phase high performance liquid chromatographic method with UV–vis detection has been developed for the determination of total free iodine in rabbit plasma after vaginal administration of povidone–iodine (PVP‐I). Sample preparation was done by protein precipitation with acetonitrile in 96‐well format and aspirin was used as the internal standard. The 100 µL sodium thiosulfate solution (5 g L^?1) was added to 100 µL plasma sample before protein precipitation, to convert the total free iodine in plasma to iodide (I^?). Separation was performed on a C₁₈ column (200 × 4.6 mm i.d., 5 µm). The mobile phase consisting of a mixture of water phase (containing 10 mmol L^?1 18‐crown‐6 ether, 5 mmol L^?1 octylamine and 5 mmol L^?1 sodium dihydrogen phosphate, pH adjusted to 6.0 with phosphoric acid) and acetonitrile in the ratio 70:30 (v/v) was delivered isocraticly at a flow rate of 1.0 mL min^?1. The method was sensitive with a lower limit of quantification of 0.005 µg mL^?1, with good linearity (r² > 0.9990) over the linear range of 0.005–2 µg mL^?1. All the validation data, such as linearity, accuracy and precision, were within the required limits. The method was successfully applied to study the pharmacokinetic of PVP–I in rabbits after vaginal administration. Copyright © 2009 John Wiley & Sons, Ltd.     

Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe2O3@TiO2 (γ‐Fe2O3@TiO2‐EG‐Cu(II)): A highly efficient magnetically separable heterogeneous nanocatalyst for one‐pot synthesis of highly substituted imidazoles

A simple, efficient and eco‐friendly procedure has been developed using Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe₂O₃@TiO₂ (γ‐Fe₂O₃@TiO₂‐EG‐Cu(II)) for the synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles, via the condensation reactions of various aldehydes with benzil and ammonium acetate or ammonium acetate and amines, under solvent‐free conditions. High‐resolution transmission electron microscopy analysis of this catalyst clearly affirmed the formation of a γ‐Fe₂O₃ core and a TiO₂ shell, with mean sizes of about 10–20 and 5–10 nm, respectively. These data were in very good agreement with X‐ray crystallographic measurements (13 and 7 nm). Moreover, magnetization measurements revealed that both γ‐Fe₂O₃@TiO₂ and γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) had superparamagnetic behaviour with saturation magnetization of 23.79 and 22.12 emu g^?1, respectively. γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) was found to be a green and highly efficient nanocatalyst, which could be easily handled, recovered and reused several times without significant loss of its activity. The scope of the presented methodology is quite broad; a variety of aldehydes as well as amines have been shown to be viable substrates. A mechanism for the cyclocondensation reaction has also been proposed.     

Dissolvable layered double hydroxide nanoadsorbent‐based dispersive solid‐phase extraction for highly efficient and eco‐friendly simultaneous microextraction of two toxic metal cations and two anionic azo dyes in real samples

For the first time, a new mode of dispersive solid‐phase extraction is presented as a simple, rapid, adsorbent‐free and environmentally friendly method for the simultaneous microextraction and preconcentration of trace amounts of two metal ions (Pb²⁺ and Cr³⁺) and two anionic azo dyes (reactive yellow 15 (RY15) and reactive black 5 (RB5)). This method is based upon the in situ formation of a layered double hydroxide (LDH) nanosorbent through an electrostatic induction process. In this method, extraction of the analytes is performed simultaneously with the formation of the nanosorbent only by adding hydroxide ions. After extraction and separation of the sorbent from the sample solution through a syringe nanofilter, the analytes are eluted by dissolving the LDHs in an acidic solution. Finally, the extracted metal cations and anionic azo dyes are directly determined by micro‐sampling flame atomic absorption spectrometry and micro‐volume UV–visible spectrophotometry, respectively. Under the optimal experimental conditions including 20 μmol of hydroxide ions, 248.4:20.8 μg l^?1 of M²⁺:M³⁺ ions, 12 cycles of air agitation and 200 μl of CF₃COOH (2 M), good linearities were obtained for Pb²⁺, Cr³⁺, RY15 and RB5 in the concentration ranges 50–600, 5.0–280, 30–2500 and 30–2000 ng ml^?1, respectively, with correlation of determinations higher than 0.995. The preconcentration factor for the target analytes was 50 in a 10 ml sample solution. The limits of detection were found to be 15, 1.5, 10 and 10 μg l^?1 for Pb²⁺, Cr³⁺, RY15 and RB5, respectively. The intra‐day and inter‐day precisions were in the ranges 4.3–6.1 and 5.5–6.8%, respectively. Additionally, the presented method is applicable for the analysis of the target analytes in different water samples with reasonable recoveries (>87%).     

Coordination chemistry of organometallic polydentate ligand Reactive chemistry of the tridentate ligand trans‐Fe(Ph2PQu‐P)2‐(CO)3 [PhzPQu=2‐diphenyl‐phosphino‐4‐methylquinoline] and molecular structure of [Fe(CO)3(μ‐Ph2PQu)2HgI]+ [HgI3]

Reaction of a new type of bidentate ligand PhPQu [PhPQu = 2‐diphenylphosphino‐4‐methylquinoline] with Fe(CO)₅ in butanol gave trans‐Fe(FpPQu‐P)(CO)₃ (1). Compound 1, which can act as a neutral tridentate organometallic ligand, was reacted with I B, II B metal compounds and a rhodium complex to give six binuclear complexes with Fe? M bonds, Fe(CO)₃ (μ‐Ph₂PQu)MX_n (2–7) [M= Zn(II), Cd(II), Hg(II), Cu(I), Ag(I), Rh(I)], and an ion‐pair complex [Fe(CO)₃ (μ‐Ph₂PQu)₂HgI][HgI₃]^? (8). The structure of 8 was determined by X‐ray crystallography. Complex 8 crystallizes in the space group P‐1 with a = 1.0758(3), b = 1.6210(4), c=1.7155(4)nm; a=75.60(2), β=71.81(2), γ=81.78(2)° and Z = 2 and its structure was refined to give agreement factors of R=0.050 and R_w = 0.057. The Fe‐Hg bond distance is 0.2536nm.