Mo (CO)6‐assisted Pd‐supported magnetic graphene oxide‐catalyzed carbonylation‐cyclization as an efficient way for the synthesis of 4(3H)‐quinazolinones

In this paper, a novel catalyst is introduced based on the immobilization of palladium on modified magnetic graphene oxide nanoparticles. The catalyst is characterized by several methods, including transmission electron microscopy, scanning electron microscopy, X‐ray fluorescence, vibrating‐sample magnetometer, Fourier transform‐infrared and dynamic light scattering (DLS) analysis. The activity of the catalyst was investigated in the synthesis of 4(3H)‐quinazolinones via Pd‐catalyzed carbonylation‐cyclization of N‐(2‐bromoaryl) benzimidamides by Mo (CO)₆. The Mo (CO)₆ is used as a carbon monoxide source for performing the reaction under mild conditions. The catalyst showed good reusability, and no change in activity was observed after 10 cycles of recovery.     

CeO2‐Based Pd(Pt) Nanoparticles Grafted onto Fe3O4/Graphene: A General Self‐Assembly Approach To Fabricate Highly Efficient Catalysts with Magnetic Recyclable Capability

New Pd(Pt) catalysts have been fabricated by assembling multicomponents of Fe₃O₄ and CeO₂/Pd(Pt) on the surface of reduced graphene oxide (RGO) nanosheets in layers. The as‐obtained Pd(Pt) catalysts exhibit extremely high catalytic activity in the selective hydrogenation reaction of nitrobenzene. Owing to the presence of Fe₃O₄, the catalysts can be easily recycled from the catalytic system through magnetic separation. Their high activity, stability, and magnetic recyclability make the as‐obtained hybrids very promising as catalysts in catalytic applications. Compared to other traditional multishell magnetic catalysts that were prepared by means of layer‐by‐layer technology, our process is much more facile and more easily controlled.     

Fe3O4/MIL‐101(Fe) nanocomposite as an efficient and recyclable catalyst for Strecker reaction

A highly porous metal‐organic framework, MIL‐101(Fe), was prepared by a solvothermal method in the presence of amino‐modified Fe₃O₄@SiO₂ nanoparticles, in order to achieve Fe₃O₄/MIL‐101(Fe) nanocomposite, which was characterized by XRD, FT‐IR, SEM, TEM, BET, and VSM. This hybrid magnetic nanocomposite was employed as heterogeneous catalyst for α‐amino nitriles synthesis through three‐component condensation reaction of aldehydes (ketones), amines, and trimethylsilyl cyanide in EtOH, at room temperature. The recoverability and reusability was admitted for the heterogeneous magnetic catalyst; no significant reduction of catalytic activity was observed even after five consecutive reaction cycles.     

Green synthesis of reduced graphene oxide/Fe3O4/Ag ternary nanohybrid and its application as magnetically recoverable catalyst in the reduction of 4‐nitrophenol

Materials having both magnetic and catalytic properties have shown great potential for practical applications. Here, a reduced graphene oxide/iron oxide/silver nanohybrid (rGO/Fe₃O₄/Ag NH) ternary material was prepared by green synthesis of Ag on pre‐synthesized rGO/Fe₃O₄. The as‐prepared rGO/Fe₃O₄/Ag NH was characterized using Fourier transform infrared spectroscopy, X‐ray diffractometry, Raman spectroscopy, vibrating sample magnetometry, transmission electron microscopy and energy‐dispersive X‐ray spectroscopy. rGO sheets were covered with Fe₃O₄ (8–16 nm) and Ag (18–40 nm) nanoparticles at high densities. The mass percentages were 13.47% (rGO), 62.52% (Fe₃O₄) and 24.01% (Ag). rGO/Fe₃O₄/Ag NH exhibited superparamagnetic behavior with high saturated magnetization (29 emu g⁻¹ at 12 kOe), and efficiently catalyzed the reduction of 4‐nitrophenol (4‐NP) with a rate constant of 0.37 min⁻¹, comparable to those of Ag‐based nanocatalysts. The half‐life of 4‐NP in the presence of rGO/Fe₃O₄/Ag NH was ca 1.86 min. rGO/Fe₃O₄/Ag NH could be magnetically collected and reused, and retained a high conversion efficiency of 94.4% after the fourth cycle. rGO/Fe₃O₄/Ag NH could potentially be used as a magnetically recoverable catalyst in the reduction of 4‐NP and environmental remediation.     

A novel hydrophobic copper complex supported on γ‐Fe2O3 as a magnetically heterogeneous catalyst for one‐pot three‐component synthesis of α‐aminophosphonates

A novel hydrophobic copper complex supported on γ‐Fe₂O₃ is synthesized and characterized by different methods such as FT‐IR, XRD, TEM, SEM, TGA, VSM, ICP and CHN analysis. It was used as a magnetically recyclable heterogeneous catalyst for the efficient synthesis of α‐aminophosphonates via a one‐pot three‐component reaction under solvent‐free conditions. The present catalytic system worked extremely well for the synthesis of α‐aminophosphonates even up to five subsequent trails without significant loss of its catalytic activity or copper leaching. The TEM image and FT‐IR spectrum of the catalyst after five times recovery showed that the structure of the catalyst was stable under the reaction conditions with no change being observed. The strong magnetic properties of the reused catalyst were revealed by complete and easy attraction using an external magnet and also by VSM curve. This work represents the first and unique example of a hydrophobic copper complex for catalysis in water generating reactions.     

A novel ternary GO@SiO2‐HPW nanocomposite as an efficient heterogeneous catalyst for the synthesis of benzazoles in aqueous media

A new solid acid catalyst, consisting of 12‐phosphotungstic heteropoly acid (HPW) supported on graphene oxide/silica nanocomposite (GO@SiO₂), has been developed via immobilizing HPW onto an amine‐functionalized GO/SiO₂ surface through coordination interaction (GO@SiO₂‐HPW). The GO@SiO₂‐HPW nanocomposite was characterized by Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and powder X‐ray diffraction (XRD). The prepared nanocomposite could be dispersed homogeneously in water and further used as a heterogeneous, reusable, and efficient catalyst for the synthesis of benzimidazoles and benzothiazoles by the reaction of 1,2‐phenelynediamine or 2‐aminothiophenol with different aldehydes.     

Design and characterization of Fe3O4/GO/Au-Ag nanocomposite as an efficient catalyst for the green synthesis of spirooxindole-dihydropyridines

A novel magnetic nanocomposite of Au-Ag nanoparticles anchored on Fe₃O₄/graphene oxide spheres (Fe₃O₄/GO/Au-Ag) was successfully fabricated by the layer-by-layer assembly technique. The prepared Fe₃O₄/GO/Au-Ag was fully characterized by Fourier-transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) analysis, thermogravimetric analysis (TGA), field-emission scanning electron microscopy (FE-SEM), energy-dispersive x-ray spectroscopy (EDS), transmission electron microscopy (TEM), and Raman spectroscopy. This nanocomposite showed unique catalytic performance for the synthesis of Spiro[indoline-3,5′-pyrido[2,3-d:6,5-d’]dipyrimidine]-pentaone derivatives by the three-component condensation reaction of isatins, barbituric acids and 6-amino uracil at room temperature and in aqueous media. The significant advantages of this protocol include highly stable, easily separable and reusable catalyst, simple operation, environmental friendliness and excellent yields.     

Silica‐coated nano‐Fe3O4‐supported iminopyridine palladium complex as an active,phosphine‐free and magnetically separable catalyst for Heck reactions

A novel magnetic nanoparticle‐supported iminopyridine palladium complex was successfully prepared by attaching palladium acetate to iminopyridine ligand‐functionalized silica‐coated nano‐Fe₃O₄. The as‐prepared catalyst was well characterized and was evaluated in Heck reactions in terms of activity and recyclability. It was found to be highly efficient for the reactions of various aryl iodides and aryl bromides having electron‐withdrawing groups with olefins under phosphine‐free and inert atmosphere‐free conditions. Moreover, the catalyst could be conveniently recovered using an external magnet, and the recyclability was influenced by the base in the Heck reaction. The catalyst could be reused at least six times with no significant loss in activity when triethylamine acted as the base.     

Copper oxide supported on magnetic nanoparticles (CuO@γ‐Fe2O3): An efficient and magnetically separable nanocatalyst for addition of amines to carbodiimides towards synthesis of substituted guanidines

Copper oxide supported on magnetic nanoparticles was used as a green magnetic nanocatalyst for hydroamination of carbodiimides towards the synthesis of guanidines. Easy preparation and separation, low cost, non‐sensitivity to moisture and reusability of the catalyst along with diversity and high yield of products are significant features of this method.     

Hydrophilic Fe3O4 nanoparticles prepared by ferrocene as high‐efficiency heterogeneous Fenton catalyst for the degradation of methyl orange

Hydrophilic Fe₃O₄ nanoparticles were prepared with ferrocene as an iron source via the thermal decomposition method and their catalytic response towards methyl orange was investigated. The effects of the pH, temperature, H₂O₂ dosage, catalyst dosage and initial dye concentration on the degradation of methyl orange were researched in detail. Furthermore, the stability of the catalyst was evaluated by measuring the degradation rate in eight successive cycles. The study demonstrates that methyl orange can be completely degraded i.e., a 99% degratation rate was obtained within 3 min. This excellent catalytic activity is attributed to the small size and good dispersibility of the nanoparticles, which stimulate the rapid and massive generation of reactive oxygen species in the heterogeneous Fenton reaction. In addition, the magnetic separation of the catalyst offers great prospects for fast and economical decontamination of dye polluted water.     

One Step Preparation of Reduced Graphene Oxide/Pd–Fe3O4@Polypyrrole Composites and Their Application in Catalysis

The simple preparation of catalysts with superior catalytic activity and good reusability is highly desirable. Herein, we report a novel strategy to construct reduced graphene oxide (rGO)/Pd–Fe₃O₄@polypyrrole (PPy) catalysts with Pd and Fe₃O₄ nanoparticles anchored on a rGO nanosheet surface and wrapped in a PPy shell. The synthesis and assembly of both the Pd and Fe₃O₄ nanoparticles, the preparation of the PPy layer, and the reduction of graphene oxide nanosheets were finished in one step. In the system, the PPy layer not only prevented aggregation of Pd and Fe₃O₄ nanoparticles, but also generated a synergistic effect with precursor Pd²⁺ ions, which led to a high dispersity of as‐prepared Pd nanoparticles. Although the procedure was simplified to one step, the catalytic activity and reusability were not sacrificed. In the reduction of 4‐nitrophenol, their catalytic performance was better than that in recent reports. Moreover, the catalysts showed good reusability owing to their magnetic properties.     

Graphene‐Based Composite with γ‐Fe2O3 Nanoparticle for the High‐Performance Removal of Endocrine‐Disrupting Compounds from Water

Graphene is a 2D sp²‐hybridized carbon sheet and an ideal material for the adsorption‐based separation of organic pollutants. However, such potential applications of graphene are largely limited, owing to their poor solubility and extensive aggregation properties through graphene? graphene interactions. Herein, we report the synthesis of graphene‐based composites with γ‐Fe₂O₃ nanoparticle for the high‐performance removal of endocrine‐disrupting compounds (EDC) from water. The γ‐Fe₂O₃ nanoparticles partially inhibit these graphene? graphene interactions and offer water dispersibility of the composite without compromising much of the high surface area of graphene. In their dispersed form, the graphene component offers the efficient adsorption of EDC, whilst the magnetic iron‐oxide component offers easier magnetic separation of adsorbed EDC.     

Electromagnetic properties of Fe3O4‐functionalized graphene and its composites with a conducting polymer

Hybrid materials of Fe₃O₄‐decorated reduced graphene oxide (Fe₃O₄‐RGO) and poly(3,4‐ethylenedioxythiophene) (PEDOT) were prepared by poly(ionic liquid)‐mediated hybridization. In this hybrid material, poly(ionic liquid) was found to perform multiple roles for: (1) stabilizing Fe₃O₄‐RGO against aggregation in the reaction medium, (2) transferring Fe₃O₄‐RGO nanomaterials from aqueous into organic phase, and (3) associating Fe₃O₄‐RGO nanomaterials with PEDOT. The hybrid materials of Fe₃O₄‐RGO with PEDOT showed the lowest surface resistivity of 80 Ω sq^?1 at an RGO‐Fe₃O₄ loading of 1 wt %, and exhibited superparamagnetic behavior with an electromagnetic interference shielding effectiveness of 22 dB. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Protease Immobilization on γ‐Fe2O3/Fe3O4 Magnetic Nanoparticles for the Synthesis of Oligopeptides in Organic Solvents

The use of nanobiocatalysts, with the combination of nanotechnology and biotechnology, is considered as an exciting and rapidly emerging area. The use of iron oxide magnetic nanoparticles, as enzyme immobilization carriers, has drawn great attention because of their unique properties, such as controllable particle size, large surface area, modifiable surface, and easy recovery. In this study, various γ‐Fe₂O₃/Fe₃O₄ magnetic nanoparticles with immobilized proteases were successfully prepared by three different immobilization strategies including A) direct binding, B) with thiophene as a linker, and C) with triazole as a linker. The oligopeptides syntheses catalyzed by these magnetic nanoparticles (MNPs) with immobilized proteases were systematically studied. Our results show that i) for magnetic nanoparticles immobilized α‐chymotrypsin, both immobilization strategies A and B furnished good reusability for the Z‐Tyr‐Gly‐Gly‐OEt synthesis, the MNPs enzymes can be readily used at least five times without significant loss of its catalytic performance: ii) In the case of Z‐Asp‐Phe‐OMe synthesis catalyzed by magnetic nanoparticles immobilized thermolysin, immobilization Strategy B provided the best recyclability: iii) For the immobilized papain, although Strategy A or B afforded an immobilized enzyme for the first cycle of Z‐Ala‐Leu‐NHNHPh synthesis in good yield, their subsequent catalytic activity decreased rapidly. In general, the γ‐Fe₂O₃ MNPs were better for use as an immobilization matrix, rather than the Fe₃O₄ MNPs, owing to their smaller particle size and higher surface area.     

Determination of trace amounts of aromatic amines after magnetic solid‐phase extraction using silver‐modified Fe3O4/graphene nanocomposite

In this work, a fast and simple magnetic dispersive solid phase extraction methodology was developed utilizing Ag@magnetite nanoparticles@graphene nanocomposite as an efficient magnetic nanosorbent for preconcentration and determine of five aromatic amines in water samples. The sorbent was characterized by diverse characterization techniques. After the extraction, high‐performance liquid chromatography with UV detection was utilized to analysis the aromatic amines. The effects of different factors on the extraction process were studied thoroughly via design of experiment and desirability function. Detection limits and linear dynamic ranges were obtained in the range of 0.10–0.20 and 0.3–300 μg/L, respectively. The relative standard deviations (n = 5) were in the range of 4.3–6.5%. Eventually, the method was employed for determination of target aromatic amines in various water samples.     

Synthesis of pyrano[2,3‐c]pyrazole derivatives using Fe3O4@SiO2@piperidinium benzene‐1,3‐disulfonate (Fe3O4@SiO2 nanoparticle‐supported IL) as a novel,green and heterogeneous catalyst

A simple, green and efficient protocol for the one‐pot four‐component synthesis of pyrano[2,3‐c ]pyrazole derivatives produced from reaction between aryl aldehydes, ethyl acetoacetate, malononitrile and hydrazine hydrate in the presence of nano magnetic piperidinium benzene‐1,3‐disulfonate was synthesized in water at 60 °C. The Fe₃O₄@SiO₂ nanoparticle‐supported IL was designed and synthesized. The present process offers advantages such as clean reaction, short reaction time, good to excellent yield, easy purification and easy recoverable catalyst.     

Zwitterionic Iron Oxide (γ‐Fe2O3) Nanoparticles Based on P(2VP‐grad‐AA) Copolymers

This study presents the synthesis and characterization of zwitterionic core–shell hybrid nanoparticles consisting of a core of iron oxide multicore nanoparticles (MCNPs, γ‐Fe₂O₃) and a shell of sultonated poly(2‐vinylpyridine‐grad‐acrylic acid) copolymers. The gradient copolymers are prepared by reversible addition fragmentation chain transfer polymerization of 2‐vinylpyridine (2VP), followed by the addition of tert‐butyl acrylate and subsequent hydrolysis. Grafting of P(2VP‐grad‐AA) onto MCNP results in P(2VP‐grad‐AA)@MCNP, followed by quaternization using 1,3‐propanesultone—leading to P(2VP_S‐grad‐AA)@MCNP with a zwitterionic shell. The resulting particles are characterized by transmission electron microscopy, dynamic light scattering, and thermogravimetric analysis measurements, showing particle diameters of ≈70–90 nm and an overall content of the copolymer shell of ≈10%. Turbidity measurements indicate increased stability toward secondary aggregation after coating if compared to the pristine MCNP and additional cytotoxicity tests do not reveal any significant influence on cell viability.

     

Constructing magnetic Fe3O4‐Au@CeO2 hybrid nanofibers for selective catalytic degradation of organic dyes

Au nanoparticles (Au NPs) play a vital role in heterogeneous catalytic reactions. However, pristine Au NPs usually suffer from poor selectivity and difficult recyclability. In this work, Fe₃O₄‐Au@CeO₂ hybrid nanofibers were prepared via a simple one‐pot redox reaction between HAuCl₄ and Ce (NO₃)₃ in the presence of Fe₃O₄ nanofibers. CeO₂ shell was uniformly coated on the surface of Fe₃O₄ nanofibers to form a unique core‐shell structure, while Au NPs were encapsulated inside the CeO₂ shell. The as‐prepared Fe₃O₄‐Au@CeO₂ hybrid nanofibers have been proved to be positively surface charged due to the formation of CeO₂ shell, enabling them to be good candidates for predominant selective catalytic activity towards the degradation of negatively charged organic dyes. In addition, the Fe₃O₄‐Au@CeO₂ hybrid nanofibers showed magnetic properties, offering them excellent recyclable usability. This work presents a facile and effective solution to prepare magnetic noble metal/metal oxide hybrid nanomaterials with unique chemical structure and surface characteristic for promising applications in heterogeneous catalysis.     

Exchange‐Coupled fct‐FePd/α‐Fe Nanocomposite Magnets Converted from Pd/Fe3O4 Core/Shell Nanoparticles

We report the controlled synthesis of exchange‐coupled face‐centered tetragonal (fct) FePd/α‐Fe nanocomposite magnets with variable Fe concentration. The composite was converted from Pd/Fe₃O₄ core/shell nanoparticles through a high‐temperature annealing process in a reducing atmosphere. The shell thickness of core/shell Pd/Fe₃O₄ nanoparticles could be readily tuned, and subsequently the concentration of Fe in nanocomposite magnets was controlled. Upon annealing reduction, the hard magnetic fct‐FePd phase was formed by the interdiffusion between reduced α‐Fe and face‐centered cubic (fcc) Pd, whereas the excessive α‐Fe remained around the fct‐FePd grains, realizing exchange coupling between the soft magnetic α‐Fe and hard magnetic fct‐FePd phases. Magnetic measurements showed variation in the magnetic properties of the nanocomposite magnets with different compositions, indicating distinct exchange coupling at the interfaces. The coercivity of the exchange‐coupled nanocomposites could be tuned from 0.7 to 2.8 kOe and the saturation magnetization could be controlled from 93 to 160 emu g^?1. This work provides a bottom‐up approach using exchange‐coupled nanocomposites for engineering advanced permanent magnets with controllable magnetic properties.