Melt modification of poly(styrene‐co‐maleic anhydride) with alcohols in the presence of 1,3‐oxazolines

Various copolyesteramides were prepared by melt compounding at 220 °C involving reaction of poly(styrene‐co‐maleic anhydride), SMA, with 6, 17, and 28 wt % maleic anhydride content, and 1‐dodecanol, C12OH, in the presence of 2‐undecyl‐1,3‐oxazoline, C11OXA. Copolymer architectures were examined by means of ¹H NMR, FTIR, DSC, and TGA using model compounds prepared via solution reactions. While conversion of anhydride with alcohol was poor due to the thermodynamically favored anhydride ring formation, very high conversions were achieved when stoichiometric amounts of C11OXA were added. According to spectroscopic studies esteramide groups resulted from reaction of oxazoline with carboxylic acid intermediate. In the absence of alcohol, C11OXA reacted with anhydride to produce esterimides. Effective attachment of flexible n‐alkyl side chains via simultaneous reaction of C12OH and C11OXA resulted in lower glass‐transition temperatures of copolyesteramides. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1222–1231, 2000     

Synthesis and characterization of poly(styrene‐maleic anhydride)‐montmorillonite nanocomposite

Poly(styrene‐maleic anhydride)‐montmorillonite nanocomposites were prepared by intercalation of layered montmorillonite with the polymer ions. Synthetic approaches including polymerization and phosphonium salt formation have been used for polymer intercalation and dispersion of the host layers in the polymer matrix. The ratio of the mineral in the composites ranged 30–50%. Wide‐angle X‐ray diffraction (WAXD) disclosed that the d₍₀₀₁₎ spacing between the internal lamellar surface were only expanding to about 13 and 15 Å according to the type of phosphonium salt suggesting packing of polymer molecules between the layers. Examination of these materials by scanning and transmission electron microscopy showed spherical nano size particles of average diameter, 350 nm. Copyright © 2002 John Wiley & Sons, Ltd.     

Preparation of an efficient catalyst through injection of CuI on modified poly (styrene-co-maleic anhydride) and theoretical investigation of the structural and electronic properties of catalyst

A novel polymer supported [poly (styrene-co-maleic imide) (SMI)]Cu(I) nano-particles was prepared via in situ reaction of 4-amino-5-methyl-4H-1,2,4-triazole-3-thione with [poly (styrene-co-maleic anhydride)] (SMA) along with immobilization of CuI. These nano-particles were fully characterized by using scanning electron microscopy (SEM), energy dispersive spectroscopy analysis, Xray (EDAX), inductively coupled plasma (ICP) analysis, ¹H NMR and FT-IR techniques. Moreover, the structural and electronic features of metal–ligand interactions in the complex model of polymer-supported copper nanocatalyst were assessed using density functional theory calculations. The catalytic activity of these supported Cu(I) nonoparticles was examined in one of the classiest name reaction so–called “click reaction” which is coined K. B Sharpless for the regioselective synthesis of 1,2,3-triazole derivatives using a multicomponent reaction (MCR) involving benzyl halides, sodium azide and terminal alkynes in water as a green solvent. This heterogeneous catalyst showed excellent catalytic activity and was separated by simple filtration and was used at least in five consecutive runs without a significant decrease in its activity.     

Synthesis and application of modified poly (styrene‐alt‐maleic anhydride) networks as a nano chelating resin for uptake of heavy metal ions

A chelating resin based on modified poly (styrene‐alt‐maleic anhydride) with 3‐aminobenzoic acid was synthesized. This modified resin was further reacted by 1,2‐diaminoethane or 1,3‐diaminopropane in the presence of ultrasonic irradiation to prepare tridimensional chelating resin for the removal of heavy metal ions from aqueous solutions. The adsorption behavior of Fe(II), Cu(II), Zn(II) and Pb(II) ions was investigated by synthesized chelating resins in various pH. Among the synthesized resins, CSMA‐AB1 and CSMA‐AB2 demonstrated a high affinity for the selected metal ions compared to SMA‐AB, and the order of removal percentage changes as follow: Fe(II) > Cu(II) > Zn(II) > Pb(II). The adsorption of all metal ions in acidic medium was moderate, and it was favored at the pH value of 6 and 7. Also, the prepared resins were examined for removal of metal ions from industrial wastewater and were shown to have a very efficient adsorption in the case of Cu(II), Fe(II) and Pb(II); however, the adsorption of Zn(II) was lower than others. The resin was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction analysis and thermogravimetric analysis/derivative thermogravimetry. Copyright © 2012 John Wiley & Sons, Ltd.     

Structural and mechanical behavior of polypropylene/ maleated styrene‐(ethylene‐co‐butylene)‐styrene/sisal fiber composites prepared by injection molding

Hybrid composites consisting of isotactic poly(propylene) (PP), sisal fiber (SF), and maleic anhydride grafted styrene‐(ethylene‐co‐butylene)‐styrene copolymer (MA‐SEBS) were prepared by melt compounding, followed by injection molding. The melt‐compounding torque behavior, thermal properties, morphology, crystal structure, and mechanical behavior of the PP/MA‐SEBS/SF composites were systematically investigated. The torque test, thermogravimetric analysis, differential scanning calorimetric, and scanning electron microscopic results all indicated that MA‐SEBS was an effective compatibilizer for the PP/SF composites, and there was a synergism between MA‐SEBS and PP/SF in the thermal stability of the PP/MA‐SEBS/SF composites. Wide‐angle X‐ray diffraction analysis indicated that the α form and β form of the PP crystals coexisted in the PP/MA‐SEBS/SF composites. With the incorporation of MA‐SEBS, the relative amount of β‐form PP crystals decreased significantly. Mechanical tests showed that the tensile strength and impact toughness of the PP/SF composites were generally improved by the incorporation of MA‐SEBS. The instrumented drop‐weight dart‐impact test was also used to examine the impact‐fracture behavior of these composites. The results revealed that the maximum impact force (F_max), impact‐fracture energy (E_T), total impact duration (t_r), crack‐initiation time (t_init), and crack‐propagation time (t_prop) of the composites all tended to increase with an increasing MA‐SEBS content. From these results, the incorporation of MA‐SEBS into PP/SF composites can retard both the crack initiation and propagation phases of the impact‐fracture process. These prolonged the crack initiation and propagation time and increased the energy consumption during impact fracture, thereby leading to toughening of PP/MA‐SEBS/SF composites. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1214–1222, 2002     

Copper(I) oxide nanoparticles supported on magnetic casein as a bio‐supported and magnetically recoverable catalyst for aqueous click chemistry synthesis of 1,4‐disubstituted 1,2,3‐triazoles

Copper(I) oxide nanoparticles supported on magnetic casein (Cu₂O/Casein@Fe₃O₄NPs) has been synthesized as a bio‐supported catalyst and was characterized using powder X‐ray diffraction, transmission electron microscopy, energy dispersive X‐ray and Fourier transform infrared spectroscopies, thermogravimetric analysis and inductively coupled plasma optical emission spectrometry. The catalytic activity of the synthesized catalyst was investigated in one‐pot three‐component reactions of alkyl halides, sodium azide and alkynes to prepare 1,4‐disubstituted 1,2,3‐triazoles with high yields in water. The reaction work‐up is simple and the catalyst can be magnetically separated from the reaction medium and reused in subsequent reactions.     

Effects of poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] on the charge distributions of low‐density polyethylene/polystyrene blends

The effect of the triblock copolymer poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS) on the formation of the space charge of immiscible low‐density polyethylene (LDPE)/polystyrene (PS) blends was investigated. Blends of 70/30 (wt %) LDPE/PS were prepared through melt blending in an internal mixer at a blend temperature of 220 °C. The amount of charge that accumulated in the 70% LDPE/30% PS blends decreased when the SEBS content increased up to 10 wt %. For compatibilized and uncompatibilized blends, no significant change in the degree of crystallinity of LDPE in the blends was observed, and so the effect of crystallization on the space charge distribution could be excluded. Morphological observations showed that the addition of SEBS resulted in a domain size reduction of the dispersed PS phase and better interfacial adhesion between the LDPE and PS phases. The location of SEBS at a domain interface enabled charges to migrate from one phase to the other via the domain interface and, therefore, resulted in a significant decrease in the amount of space charge for the LDPE/PS blends with SEBS. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2813–2820, 2004