Zn3(BTC)2 as a Highly Efficient Reusable Catalyst for the Synthesis of 2‐Aryl‐1H‐Benzimidazole

Zn₃(BTC)₂ metal‐organic frameworks as recyclable and heterogeneous catalysts were effectively used to catalyze the synthesis of benzimidazole derivatives from o‐phenylendiamine and aldehydes in ethanol. This method provides 2‐aryl‐1H‐benzimidazoles in good to excellent yields with little catalyst loading. The catalyst was characterized using different techniques such as X‐ray diffraction (XRD), energy dispersive X‐ray (EDX) analysis, scanning electron microscopy (SEM), and Fourier transform infrared (FT‐IR) spectroscopy.     

Application of the Fe3O4@1,10‐phenanthroline‐5,6‐diol@Mn nano‐catalyst for the green synthesis of tetrazoles and its biological performance

The Fe₃O₄ magnetic particles were modified with 1,10‐phenanthroline‐5,6‐diol (Phen) and the related Mn complex (Fe₃O₄@Phen@Mn) synthesized as a heterogeneous catalyst to be used for the one‐pot three‐component synthesis of various tetrazoles. The catalysts were characterized by several methods, such as the elemental analysis, FT‐IR, X‐ray powder diffraction, dispersive X‐ray spectroscopy, scanning electron microscopy, transmission electron microscopy, dynamic light scattering, thermogravimetric‐differential thermal analysis, vibrating sample magnetometer and X‐ray photoelectron spectroscopy. In addition, the antioxidant and antibacterial activities of the catalyst and its Phen ligand were in vitro screened with 2,2‐diphenyl‐1‐picrylhydrazyl by free radical scavenging methods. Results showed that the synthesized compounds possess strong antioxidant activity (IC50; 0.172  ±  0.005 mg ml^?1) as well as a good antibacterial potential in comparison to standards.     

Copper(I) complex of 1,3‐DimethylBarbituric acid modified SBA‐15 and its catalytic role for the synthesis of 2,3‐Dihydroquinazolin‐4(1H)‐ones and Imidazoles

An efficient one‐pot method for synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and tri/tetra substituted‐1H‐imidazoles has been accomplished in the presence of catalytic amounts of Cu(I)‐1,3‐dimethylbarbituric acid modified SBA‐15 as heterogeneous catalyst with good to excellent yields. The catalyst is reusable and can be applied several times without any decrease in product yield. The synthesized catalyst was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy (EDS), thermal gravimetric analysis (TGA), N₂ adsorption/desorption isotherms (BET), Fourier transform infrared spectroscopy (FT‐IR) and atomic absorption spectroscopy (AAS).     

A three‐component process for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐one derivatives using nanosized nickel aluminate spinel crystals as highly efficient catalysts

NiAl₂O₄ spinel nanocrystals were synthesized as mesoporous catalysts and were fully characterized using Fourier‐transform infrared spectroscopy (FT‐IR), X‐ray diffraction patterns (XRD), scanning electron microscopy (SEM), and Energy‐dispersive X‐ray spectroscopy (EDS). These nanocrystals catalyzed the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐one derivatives via a one‐pot, three‐component condensation reaction of aromatic aldehydes, isatoic anhydride, and ammonium acetate or primary aromatic amine under microwave irradiation. By far, the most obvious advantages of the offered process are efficiency and recyclability of the catalyst as well as a significantly shorter reaction time.     

Engineering a Cu‐MOF Nano‐Catalyst by using Post‐Synthetic Modification for the Preparation of 5‐Substituted 1H‐Tetrazoles

A new nano scale Cu‐MOF has been obtained via post‐synthetic metalation by immersing a Zn‐MOF as a template in DMF solutions of copper(II) salts. The Cu‐MOF serves as recyclable nano‐catalyst for the preparation of 5‐substituted 1H‐tetrazoles via [3 + 2] cycloaddition reaction of various nitriles and sodium azide in a green medium (PEG). The post‐synthetic metalated MOF were characterized by FT‐IR spectroscopy, powder X‐ray diffraction (PXRD), atomic absorption spectroscopy (AAS), and energy dispersive X‐ray spectroscopy (EDX) techniques. The morphology and size of the nano‐catalyst were determined by field emission scanning electron microscopy (FE‐SEM).     

Recyclable Porous Polymer‐Supported Copper Catalysts for Glaser and Huisgen 1,3‐Diolar Cycloaddition Reactions

A family of polymer‐attached phenanthrolines was prepared from solvothermal copolymerization of divinylbenzene with N‐(1,10‐phenanthroline‐5‐yl)acrylamide in different ratios. The polymer‐supported copper catalysts were obtained through typical impregnation with copper(II) salts. The polymers and supported copper catalysts have been characterized by N₂ adsortion, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TG); they exhibit a high surface area, hierarchical porosity, large pore volume, and high thermal and chemical stabilities. The copper catalyst has proved to be highly active for Glaser homocoupling of alkynes and Huisgen 1,3‐diolar cycloaddition of alkynes with benzyl azide under mild conditions at low catalyst loading. The heterogeneous copper catalyst is more active than commonly used homogeneous and nonporous polystyrene‐supported copper catalysts. In particular, the catalyst is easily recovered and can be recycled at least ten times without any obvious loss in catalytic activity. Metal leaching was prevented due to the strong binding ability of phenanthroline and products were not contaminated with copper, as determined by ICP analysis.     

Preparation of Fe@Cu‐BDC and its catalytic performance for benzene hydroxylation

Novel Fe@Cu‐BDC catalysts were synthesized by adsorbing various contents of Fe ions on the surface and into the channels of Cu‐BDC support through an in situ method under ultrasonication. The structure of the catalysts was characterized using X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, energy‐dispersive X‐ray spectrometry, X‐ray photoelectron spectroscopy and thermogravimetric analysis. The catalytic activity of catalysts for benzene hydroxylation was evaluated. The results showed that the Fe@Cu‐BDC catalysts had favorable catalytic activity for benzene hydroxylation. The yield of products can reach ca 37% and the selectivity of phenol can reach ca 62% over the 6% Fe@Cu‐BDC catalyst at 60°C in a reaction time of 75 min. Furthermore, the contents of Fe and solvent played a key role in benzene hydroxylation. After the reaction, the catalyst could be easily separated from the reaction mixture by centrifugation and reused for five times without significant decrease in activity.     

Fe3O4@NCs/BF0.2: A magnetic bio‐based nanocatalyst for the synthesis of 2,3‐dihydro‐1H‐perimidines

Nanocellulose (NC) materials have some unique properties, which make them attractive as organic or inorganic supports for catalytic applications. Nanocatalysts with diameters of less than 100 nm are difficult to separate from the reaction mixture, therefore, magnetic nanoparticles (MNPs) were used as catalysts to overcome this problem. Fe₃O₄@NCs/BF_0.2 as a green, bio‐based, eco‐friendly, and recyclable catalyst was synthesized and characterized using fourier‐transform infrared spectroscopy (FT‐IR), vibrating sample magnetometer (VSM), X‐ray diffraction (XRD), X‐ray fluorescence (XRF), Brunauer–Emmett–Teller (BET), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and thermal gravimetric analysis (TGA) techniques. Fe₃O₄@NCs/BF_0.2 was employed for the synthesis of 2,3‐dihydro‐1H‐perimidine derivatives via a reaction of 1,8‐diaminonaphthalene with various aldehydes at room temperature under solvent‐free conditions. The present procedure offers several advantages including a short reaction time, excellent yields, easy separation of catalyst, and environmental friendliness.     

Formation of PdNiZn thin film at oil‐water interface: XPS study and application as Suzuki‐Miyaura catalyst

Nanosheet of PdNiZn and nanosphere of PdNiZn/reduced‐graphene oxide (RGO) with sub‐3 nm spheres have been successfully synthesized through a facile oil‐water interfacial strategy. The morphology and composition of the films were determined by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive analysis of X‐ray (EDAX) and elemental mapping. In the present study, we have developed a method to minimize the usage of precious Pd element. Due to the special structure and intermetallic synergies, the PdNiZn and PdNiZn/RGO nanoalloys exhibited enhanced catalytic activity and durability relative to Pd nanoparticles in Suzuki‐Miyaura C‐C cross‐coupling reaction. Compared to classical cross‐coupling reactions, this method has the advantages of a green solvent, short reaction times, low catalyst loading, high yields and reusability of the catalysts.     

Novel Flower‐Like Ag‐SiO2‐MgO‐Al2O3 Material: Preparation,Characterization and Catalytic Application in Methanol Dehydrogenation

Catalytic direct dehydrogenation of methanol to formaldehyde was carried out over Ag‐SiO₂‐MgO‐Al₂O₃ catalysts prepared by sol‐gel method. The optimal preparation mass fractions were determined as 8.3% MgO, 16.5% Al₂O₃ and 20% silver loading. Using this optimum catalyst, excellent activity and selectivity were obtained. The conversion of methanol and the selectivity to formaldehyde both reached 100%, which were much higher than other previously reported silver supported catalysts. Based on combined characterizations, such as X‐ray diffraction (XRD), scanning electronic microscopy (SEM), diffuse reflectance ultraviolet‐visible spectroscopy (UV‐Vis, DRS), nitrogen adsorption at low temperature, temperature programmed desorption of ammonia (NH₃‐TPD), desorption of CO₂ (CO₂‐TPD), etc., the correlation of the catalytic performance to the structural properties of the Ag‐SiO₂‐ MgO‐Al₂O₃ catalyst was discussed in detail. This perfect catalytic performance in the direct dehydrogenation of methanol to formaldehyde without any side‐products is attributed to its unique flower‐like structure with a surface area less than 1 m²/g, and the strong interactions between neutralized support and the nano‐sized Ag particles as active centers.     

Dehydrogenation of Isobutane to Isobutene with Carbon Dioxide over SBA‐15‐Supported Chromia‐Ceria Catalysts

A series of SBA‐15‐supported chromia‐ceria catalysts with 3% Cr and 1%–5% Ce (3Cr‐Ce/SBA) were prepared using an incipient wetness impregnation method. The catalysts were characterized by XRD, N₂ adsorption, SEM, TEM‐EDX, Raman spectroscopy, UV–vis spectroscopy, XPS and H₂‐TPR, and their catalytic performance for isobutane dehydrogenation with CO₂ was tested. The addition of ceria to SBA‐15‐supported chromia improves the dispersion of chromium species. 3Cr‐Ce/SBA catalysts are more active than SBA‐15‐supported chromia (3Cr/SBA), which is due to a higher concentration of Cr⁶⁺ species present on the former catalysts. The 3Cr‐3Ce/SBA catalyst shows the highest activity, which gives 35.4% isobutane conversion and 89.6% isobutene selectivity at 570 °C after 10 min of the reaction.     

Magnetic nanoparticle‐tethered Schiff base–palladium(II): Highly active and reusable heterogeneous catalyst for Suzuki–Miyaura cross‐coupling and reduction of nitroarenes in aqueous medium at room temperature

As a continuation of our efforts to develop new heterogeneous nanomagnetic catalysts for greener reactions, we identified a Schiff base–palladium(II) complex anchored on magnetic nanoparticles (SB‐Pd@MNPs) as a highly active nanomagnetic catalyst for Suzuki–Miyaura cross‐coupling reactions between phenylboronic acid and aryl halides and for the reduction of nitroarenes using sodium borohydride in an aqueous medium at room temperature. The SB‐Pd@MNPs nanomagnetic catalyst shows notable advantages such as simplicity of operation, excellent yields, short reaction times, heterogeneous nature, easy magnetic work up and recyclability. Characterization of the synthesized SB‐Pd@MNPs nanomagnetic catalyst was performed with various physicochemical methods such as attenuated total reflectance infrared spectroscopy, UV–visible spectroscopy, inductively coupled plasma atomic emission spectroscopy, energy‐dispersive X‐ray spectroscopy, field‐emission scanning electron microscopy, transmission electron microscopy, powder X‐ray powder diffraction, thermogravimetric analysis and Brunauer–Emmett–Teller surface area analysis.     

Synthesis of Bis‐Thiazolidinones Using Chitosan‐attached Nano‐CuFe2O4 as an Efficient and Retrievable Heterogeneous Catalyst

The preparation of bis‐thiazolidinones has been achieved by a one‐pot condensation reaction of araldehydes, ethylenediamine, and 2‐mercaptoacetic acid in the presence of nano‐CuFe₂O₄@chitosan under reflux conditions in toluene. The catalyst was characterized by powder X‐ray diffraction (XRD), scanning electronic microscopy (SEM), vibrating sample magnetometer (VSM) measurements, thermal gravimetric analysis (TGA), and FT‐IR spectroscopy. This method provides several advantages including excellent yields, wide range of products, reusability of the catalyst, and a low amount of the catalyst.     

Visualizing the Stoichiometry of Industrial‐Style Co‐Mo‐S Catalysts with Single‐Atom Sensitivity

The functional properties of transition metal dichalcogenides (TMDs) may be promoted by the inclusion of other elements. Here, we studied the local stoichiometry of single cobalt promoter atoms in an industrial‐style MoS₂‐based hydrotreating catalyst. Aberration‐corrected scanning transmission electron microscopy and electron energy loss spectroscopy show that the Co atoms occupy sites at the (?100) S edge terminations of the graphite‐supported MoS₂ nanocrystals in the catalyst. Specifically, each Co atom has four neighboring S atoms that are arranged in a reconstructed geometry, which reflects an equilibrium state. The structure agrees with complementary studies of catalysts that were prepared under vastly different conditions and on other supports. In contrast, a small amount of residual Fe in the graphite is found to compete for the S edge sites, so that promotion by Co is strongly sensitive to the purity of the raw materials. The present single‐atom‐sensitive analytical method therefore offers a guide for advancing preparative methods for promoted TMD nanomaterials.     

Magnetic‐based picolinaldehyde–melamine copper complex for the one‐pot synthesis of hexahydroquinolines via Hantzsch four‐component reactions

A picolinaldehyde–melamine copper complex was loaded on a magnetic Fe₃O₄ core, so that it contained 0.33 mmol of Cu per gram, and was used as an efficient catalyst. The as‐synthesized catalyst was characterized using various techniques, including Fourier transform infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry and thermogravimetric analysis. The catalyst was used to activate the raw materials in the synthesis of hexahydroquinoline derivatives in one‐pot four‐component reactions. Low reaction time (minutes versus half an hour), solvent‐free condition and magnetically separable catalyst are some salient features of the developed catalyst. Also, the optimum amount of catalyst and temperature were determined as 0.07 g and 87.6 °C, respectively, which were obtained using response surface methodology and optimization techniques.     

One‐pot synthesis of 1‐ and 5‐substituted 1H‐tetrazoles using 1,4‐dihydroxyanthraquinone–copper(II) supported on superparamagnetic Fe3O4@SiO2 magnetic porous nanospheres as a recyclable catalyst

An effective one‐pot, convenient process for the synthesis of 1‐ and 5‐substituted 1H‐tetrazoles from nitriles and amines is described using1,4‐dihydroxyanthraquinone–copper(II) supported on Fe₃O₄@SiO₂ magnetic porous nanospheres as a novel recyclable catalyst. The application of this catalyst allows the synthesis of a variety of tetrazoles in good to excellent yields. The preparation of the magnetic nanocatalyst with core–shell structure is presented by using nano‐Fe₃O₄ as the core, tetraethoxysilane as the silica source and poly(vinyl alcohol) as the surfactant, and then Fe₃O₄@SiO₂ was coated with 1,4‐dihydroxyanthraquinone–copper(II) nanoparticles. The new catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometry, X‐ray photoelectron spectroscopy, nitrogen adsorption–desorption isotherm analysis and inductively coupled plasma analysis. This new procedure offers several advantages such as short reaction times, excellent yields, operational simplicity, practicability and applicability to various substrates and absence of any tedious workup or purification. In addition, the excellent catalytic performance, thermal stability and separation of the catalyst make it a good heterogeneous system and a useful alternative to other heterogeneous catalysts. Also, the catalyst could be magnetically separated and reused six times without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

Preparation,characterization and application of silica‐supported palladium complex as a new and heterogeneous catalyst for Suzuki and Sonogashira reactions

An efficient heterogeneous Pd catalytic system has been developed, based on immobilization of Pd nanoparticles (PNPs) on a silica‐bonded propylamine–cyanuric–cysteine (SiO₂–pA–Cyan–Cys) substrate. The synthesized catalyst was characterized by transmission electron microscopy, scanning electron microscopy, FT‐IR, N₂ adsorption analysis (BET), TGA and inductively coupled plasma/atomic emission spectroscopy, and catalytic activity of this catalyst was investigated in the Suzuki and Sonogashira cross‐coupling reactions. The catalysts showed excellent performance in these two reactions, including various aryl halide derivatives (except aryl chloride derivatives) with phenylboronic acid and phenylacetylene under green conditions. Moreover, the catalyst was recycled for several runs without any significant loss of catalytic activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Iron promotion of V‐HMS mesoporous catalysts for ultra‐deep oxidative desulfurization

Bimetallic Fe‐V‐HMS (HMS, hexagonal mesoporous silica) catalysts with various molar ratios of iron to vanadium were synthesized using a co‐synthesis method, and investigated for oxidative desulfurization of dibenzothiophene (DBT) using tert‐butyl hydroperoxide as an oxidant. The catalysts were characterized using X‐ray diffraction, temperature‐programmed desorption of ammonia, Fourier transform infrared spectroscopy and N₂ physical adsorption–desorption techniques. The Fe‐V‐HMS catalyst with a 2:1 molar ratio of iron to vanadium exhibited the highest total acidity and the highest catalytic activity. DBT was almost completely oxidized to dibenzothiophenesulfone, a species with a higher polarity that could be subsequently adsorbed on the Fe‐V‐HMS, and therefore the Fe‐V‐HMS acts as both a catalyst and an adsorbent simultaneously. The desulfurization rate was 98.1%. A pseudo‐first‐order model was fitted to the experimental data, and the activation energy was found to be 38.79 kJ mol^?1. The encouraging performance of Fe‐V‐HMS offers the prospect of the design of a one‐pot oxidative desulfurization process without needing extraction of sulfones from fuel oil with a chemical solvent.     

Dehydration of Castor Oil over NaHSO4/MCM‐41 Catalyst Modified by n‐Dodecyltriethoxysilane

n‐Dodecyltriethoxysilane (DTEOS) modified NaHSO₄/MCM‐41 catalysts (silanized catalysts) were synthesized by different impregnation sequences and evaluated in the liquid‐phase dehydration of castor oil. The samples were evaluated by X‐ray diffraction, nitrogen adsorption‐desorption, SEM, TEM, FT‐IR spectroscopy, XPS, ²⁹Si MAS NMR spectroscopy, contact angle measurements, NH₃‐TPD, and pyridine‐FT‐IR spectroscopy. The analyses demonstrated that silanization enhanced the hydrophobicity of the catalysts, and the impregnation sequence of silanized catalysts had a significant effect on the NaHSO₄ dispersion, surface area, acid distribution, and hydrophobicity of the silanized catalysts. The catalytic activity of the silanized catalysts was much higher than that of NaHSO₄/MCM‐41. Among the silanized catalysts, the catalyst prepared by simultaneous impregnation with DTEOS and NaHSO₄ showed the highest iodine value of 141.8 [g(I₂) per 100 g] and lowest hydroxyl value of 11.3 [mg(KOH) · g^–1].