Synthesis and characterization of MgO nanoparticles supported on ionic liquid‐based periodic mesoporous organosilica (MgO@PMO‐IL) as a highly efficient and reusable nanocatalyst for the synthesis of novel spirooxindole‐furan derivatives

The synthesis and catalytic application of a novel MgO containing periodic mesoporous organosilica with ionic liquid framework (MgO@PMO‐IL) is described. The prepared MgO@PMO‐IL was characterized by Fourier transform‐infrared spectroscopy, N₂ adsorption/desorption, transmission electron microscopy, field emission‐scanning electron microscopy, thermogravimetric and inductively coupled plasma analyses. This nanocatalyst was successfully applied as a highly efficient and recoverable catalyst for the synthesis of novel spirooxindole‐furan derivatives via the three‐component reaction of 1,3‐dicarbonyl compounds, N‐phenacyl pyridinium salts and isatin derivatives. The products were achieved in high to excellent yields with a simple work‐up procedure and short reaction times, and the catalyst could be recovered through a simple filtration process and successfully reused seven times without any significant decrease in its efficiency.     

Silica‐supported Cu(II)–quinoline complex: Efficient and recyclable nanocatalyst for one‐pot synthesis of benzimidazolquinoline derivatives and 2H‐indazoles

The synthesis, characterization and catalytic activity of a Cu(II) complex derived from 2‐oxoquinoline‐3‐carbaldehyde Schiff base supported on amino‐functionalized silica are reported. 3‐(1H‐Benzo[d]imidazol‐2‐yl)quinolines containing piperidine, morpholine and phenylpiperazine skeletons at the C‐2 position were formed in good to excellent yields via the one‐pot reaction of 2‐chloroquinoline‐3‐carbaldehyde, benzene‐1,2‐diamines and secondary amines in the presence of the nanocatalyst under mild conditions. Moreover, the nanocatalyst was found to be recyclable for up to seven runs without significant loss of activity. Also, a series of 2H‐indazoles were synthesized by the catalytic condensation of 2‐bromobenzaldehyde, sodium azide and primary amines.     

Palladium nanoparticles immobilized on Schiff base‐functionalized mesoporous silica as a highly efficient and magnetically recoverable nanocatalyst for Heck coupling reaction

A new magnetically recoverable nanocatalyst was prepared by functionalization of mesoporous silica (SBA‐15) with a Schiff base ligand, and then immobilization of palladium nanoparticles on it using a simple procedure. This heterogeneous catalyst was fully characterized using appropriate analyses and its catalytic efficiency was investigated in Heck reaction using iodo‐, bromo‐ and chlorobenzene derivatives and styrene, with the aim of synthesizing stilbene derivatives, a class of compounds with a variety of pharmacological properties. Some of the characteristics of this nanocatalyst include good dispersion of palladium nanoparticles on the SBA‐15 support, easy separation, catalyses the production of stilbene derivatives in a short time with excellent yields even for bromo‐ and chlorobenzene, and preservation of its catalytic activity after eight reaction cycles.     

Periodic mesoporous silica‐supported Ni(II) organometallic complex as an active and reusable nanocatalyst for water‐medium Sonogashira coupling reaction

Phenyl‐bridged periodic mesoporous organosilicas (PMOs) functionalized with diphenylphosphino (PPh₂‐) ligands were synthesized via a surfactant‐directed self‐assembly approach, and were used as a support to immobilize Ni(II) organometallic complex by coordination interaction. In comparison with Ni‐PPh₂‐SBA‐15 and Ni‐PPh₂‐PMOs(Et) catalysts, the as‐prepared Ni‐PPh₂‐PMOs(Ph) exhibited superior catalytic reactivity and selectivity in water‐medium Sonogashira reaction. A control experiment demonstrated that its high activity could be attributed to the high dispersion of Ni(II) active sites and ordered mesopore channels, which effectively diminished diffusion limitation. Meanwhile, the phenyl organic groups in the support wall enhanced surface hydrophobicity, which promoted the adsorption for organic reactant molecules. Moreover, it displayed almost the same catalytic efficiency with the corresponding homogeneous Ni(PPh₃)₂Cl₂ catalyst and could be used repetitively, which was considered as a more environmentally friendly catalytic process since it simultaneously avoided the use of noble metal active species and toxic organic solvents. Copyright © 2013 John Wiley & Sons, Ltd.     

Application and developing of iron‐doped multi‐walled carbon nanotubes (Fe/MWCNTs) as an efficient and reusable heterogeneous nanocatalyst in the synthesis of heterocyclic compounds

Iron‐doped multi‐walled carbon nanotubes (Fe/MWCNTs) is an efficient, ecofriendly and reusable heterogeneous nanocatalyst for the one‐pot synthesis of heterocyclic compounds including bis‐spiro piperidines, piperidines, dihydro‐2‐oxopyrroles, pyrazoles and diazepines at room temperature with good to excellent yields. The heterogeneous nanocatalyst was fully characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) and FT‐IR analysis. Also, the structures of all prepared compounds were characterized by ¹H NMR, ¹³C NMR, FT‐IR, mass spectrometry (MS) and elemental analysis. The major advantages of these protocols are mild and green reaction conditions, short reaction times, clean reaction, operational simplicity, easy purification and good to excellent yields with the reusable heterogeneous nanocatalyst. The catalyst was ten recycled without significant loss of activity.     

A green approach for the synthesis of 2‐oxazolidinones using gold(I) complex immobilized on KCC‐1 as nanocatalyst at room temperature

A novel gold(I)‐containing ionic liquid‐based KCC‐1 catalyst was applied for the cyclization of propargylic amines with CO₂ to provide 2‐oxazolidinones. High catalytic activity and ease of recovery from the reaction mixture using an external magnet, and several recycle runs without significant loss in performance are additional eco‐friendly attributes of this catalytic system. Copyright © 2016 John Wiley & Sons, Ltd.     

An efficient one‐pot synthesis of 2‐aminopyrimidinomethylnaphtols under solvent‐free conditions

A novel one‐pot three‐component condensation reaction of an aldehyde, 2‐aminopyrimidine and 2‐naphthol to afford the corresponding 2‐aminopyrimidinomethylnaphtols in good yields. The remarkable features of this new procedure are high conversions, short reaction time, clean reaction profiles, and environmentally benign and simple work‐up procedures.     

Introduction of Ag/CuO/MCM‐48 as an efficient catalyst for the one‐pot synthesis of novel pyran‐pyrrole hybrids

Bimetallic silver and copper incorporated mesoporous MCM‐48 (Ag/CuO/MCM‐48) was synthesized by simple wet‐impregnation method. The knowledge about its structural properties was gathered by means of Fourier transform‐infrared, energy‐dispersive X‐ray, X‐ray diffraction, field emission‐scanning electron microscopy, transmission electron microscopy and Brunauer–Emmett–Teller analyses. The catalytic activity of Ag/CuO/MCM‐48 was examined in the one‐pot three‐component reaction of 3‐(1‐methyl‐1H‐pyrrol‐2‐yl)‐3‐oxopropanenitrile, malononitrile and various aromatic aldehydes leading to novel pyran‐pyrrole hybrid derivatives in reduced reaction times (5–10 min) and excellent yields (88–97%). Application of Ag/CuO/MCM‐48 as a potent heterogeneous catalyst with good reusability up to five times, use of ethanol as an eco‐compatible medium and chromatography‐free work‐up are some crucial green aspects of this procedure.     

Surfactant‐directed one‐pot preparation of novel Ti‐containing mesomaterial with improved catalytic activity and reusability

Titanium was incorporated in ionic liquid based periodic mesoporous organosilica to prepare a nanostructured catalyst (Ti@PMO‐IL) with high activity. Procedure for the synthesis of Ti@PMO‐IL was followed according the simultaneous hydrolysis and condensation of alkylimidazolium ionic liquid, tetramethoxysilane (TMOS) and tetrabutylorthotitanate (TBOT) where a surfactant template was used together with a simple acid‐based catalytic aproach. N₂ adsorption isotherm of the Ti@PMO‐IL was studied to measure its mean pore volume, pore size distribution and specific surface area. Diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy was applied to identify the chemical bonds present in Ti@PMO‐IL. The morphology of this nanomaterial was investigated by scanning electron microscopy (SEM). Transmission electron microscopy (TEM) image was used to study mesoporosity and structure order of the catalyst. The catalytic activity of Ti@PMO‐IL was then studied and found to be efficient and reusable to catalyze Hantzsch reaction.     

NbCl5: an efficient catalyst for one‐pot synthesis of α‐aminophosphonates under solvent‐free conditions

NbCl₅ has been found to be a very effective catalyst for the synthesis of a variety of α‐aminophosphonates through the Kabachnik–Fields reaction of carbonyl compound, amine and diethyl phosphite under solvent‐free conditions. Copyright © 2010 John Wiley & Sons, Ltd.     

Ca(NO3)2•4H2O-catalysed Biginelli Reaction: One-pot Synthesis of 1,2,3,4-Tetrahydropyrimidin-2-ones/pyrimidine-2-thiones under Solvent-free Conditions

The synthesis of 1,2,3,4-dihydropyrimidinone/thione derivatives was achieved in good to excellent yields using calcium(II) nitrate as catalyst to promote the Biginelli three-component condensation reaction from a diversity of aromatic aldehydes, β-keto compounds and urea or thiourea. The reaction was carried out under solvent-free conditions.     

Surface modified SPIONs‐Cr(VI) ions‐immobilized organic‐inorganic hybrid as a magnetically recyclable nanocatalyst for rapid synthesis of polyhydroquinolines under solvent‐free conditions at room temperature

In this work, a magnetic hybrid dichromate nanocomposite with triphenylphosphine surface modified superparamagnetic iron oxide nanoparticles (SPIONs) as a recyclable nanocatalyst was designed, prepared and characterized by Fourier transform infrared spectroscopy (FT‐IR) spectra, X‐ray diffraction (XRD) pattern analysis, vibrating sample magnetometer (VSM) curves, X‐ray fluorescence (XRF) analysis, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images and dynamic light scattering (DLS) analysis. Then, it was used in a green and efficient procedure for one‐pot multicomponent synthesis of polyhydroquinoline derivatives by the condensation of aldehydes, dimedone or 1,3‐cyclohexadione, ethyl acetoacetate and ammonium acetate. This protocol includes some new and exceptional advantages such as short reaction times, low catalyst loading, high yields, solvent‐free and room temperature conditions, easy separation and reusability of the catalyst.     

Supported benzimidazole‐salen Cu(II) complex: An efficient,versatile and highly reusable nanocatalyst for one‐pot synthesis of hybrid molecules

A novel and efficient nanocatalyst consisting of benzimidazole‐salen Cu(II) complex on surface‐modified silica (BS‐Cu(II)@SiO₂) was prepared. The heterogeneous nanocatalyst was characterized by FESEM, TEM, EDX, FT‐IR, XRD, ICP, and TGA. The nanocatalyst was used for the one‐pot synthesis of some target hybrid molecules. An efficient four component C–H bond activation/[3 + 2] cycloaddition and condensation/cyclization/aromatization sequence toward triazole‐benzimidazole derivatives is disclosed. This methodology provides a general and rapid synthetic route to some new triazole‐benzimidazole hybrids under mild reaction conditions. In addition, the heterogeneous nanocatalyst can be easily separated from the reaction mixture and used several times without noticeable leaching or loss of its catalytic activity. We believe this interesting one‐pot reaction as well as benzimidazole‐salen Cu(II) complex pave the way to the design and synthesis of other new hybrid molecules and metal catalysts, respectively.     

Copper nanoparticles supported on 2‐methoxy‐1‐phenylethanone‐functionalized MCM‐41: An efficient and recyclable catalyst for one‐pot three‐component C–S coupling reaction of aryl halides with benzyl bromide and thiourea

An environmentally friendly copper‐based catalyst supported on 2‐methoxy‐1‐phenylethanone‐functionalized MCM‐41 was prepared and characterized by Fourier transform‐infrared, transmission electron microscopy, field emission‐scanning electron microscopy, X‐ray diffraction and inductively coupled plasma techniques. The catalyst was applied for the one‐pot three‐component C–S coupling reactions of aryl halides with benzyl bromide and thiourea under aerobic conditions to afford the corresponding coupled products in good yields in water. The catalyst could be recovered and recycled five times. These results prove 2‐methoxy‐1‐phenylethanone‐functionalized MCM‐41 supported Cu (II) complex was not leached during the reaction. Also it shows the correct heterogeneous nature of the catalyst.     

Precisely controlled copper(0)‐catalyzed one‐pot reaction: Concurrent living radical polymerization and click chemistry

Copper(0)‐catalyzed one‐pot reaction combining living radical polymerization and “click chemistry” was investigated. By precisely tuning reaction time, three novel well‐defined polymers with different degree of carboxyl substitution, poly(propargyl methacrylate) (PPgMA), poly(1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate) (PCTMMA), and poly(1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate‐co‐propargyl methacrylate) (PCTMMA‐co‐PPgMA) were selectively obtained via Cu(0) powder/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) cocatalyzed LRP and click chemistry. In addition, gel permeation chromatography and ¹H NMR analysis in conjunction with FTIR spectroscopy elucidate that one‐pot process undergoes three steps due to a pronounced rate enhancement of click reaction: (1) generating new monomer, 1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate (CTMMA); (2) copolymerization of two monomers (CTMMA and PgMA); (3) building homopolymer PCTMMA. Surprisingly, in contrast to typical Cu(I)‐catalyzed atom transfer radical polymerization (ATRP), copper(0)‐catalyzed one‐pot reaction showed high carboxylic acid group tolerance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Functionalized graphene oxide supported copper (I) complex as effective and recyclable nanocatalyst for one‐pot three component synthesis of 1,2,3‐triazoles

Efficient, one pot three‐component reaction of alkyl halides, sodium azide with terminal alkynes can be catalyzed by functionalized graphene oxide with copper(I) under thermal conditions. A series of 1,4‐disubstituted 1,2,3‐triazoles were obtained by this one‐pot strategy. The catalyst was prepared and characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), emission scanning electron microscopy (FE‐SEM) and energy dispersive X‐ray (EDX). The catalyst can be reused at least five times without significant deactivation.     

Polypyrrole/Fe3O4/CNT as a recyclable and highly efficient catalyst for one‐pot three‐component synthesis of pyran derivatives

Polypyrrole (PPY)/Fe₃O₄/CNT has been synthesized and characterized by FT‐IR, TEM and SEM techniques and its catalytic activity has been evaluated in the synthesis of several series of pyran derivatives. Tetrahydrobenzo[b]pyranes, 4H‐pyran‐3‐carboxylates, 4H,5H‐pyrano[3,2‐c]chromenes and dihydropyrano[2,3‐c]pyrazoles have been successfully prepared from one‐pot three‐component condensation of aldehyde, malononitrile and active methylene‐containing compounds (dimedone /ethyl acetoacetate/4‐hydroxycoumarin/3‐methyl‐2‐pyrazoline‐5‐one) using PPY/Fe₃O₄/CNT as a new and reusable heterogeneous catalyst. The present method offer several advantages such as; high yields of products, short reaction times, easy work‐up procedure and easy separation of the catalyst from the reaction mixture due to its magnetic character. Furthermore, chemoselective synthesis of bis‐benzo[b]pyran from terephthalaldehyde can be achieved by this method.     

溴化镁催化的1,2,3,4-四氢吡啶酮无溶剂合成研究

An efficient and environmentally friendly procedure for the one-pot synthesis of tetrahydropyrimidinones from aldehydes, β-diketones and urea/thiourea by using magnesium bromide as an inexpensive and easily available catalyst under solvent-free conditions was described. Compared with the classical Biginelli reaction conditions, this new method has the advantage of good to excellent yields (74%-94%) and short reaction time (45-90 min). The structure of the Biginelli reaction product from β-diketone, salicylaldehyde and urea has been proposed to possess an oxygen-bridge by cyclization (intramolecular Michael-addition).     

Phosphotungstic acid grafted zeolite imidazolate framework as an effective heterogeneous nanocatalyst for the one‐pot solvent‐free synthesis of 3,4‐dihydropyrimidinones

Phosphotungstic acid (H₃PW₁₂O₄₀, PTA) supported on ZIF‐9(NH₂) was synthesized for the first time and performed as an effective and environmental friendly catalyst in the one‐pot three component Biginelli condensation of different substituted benzaldehydes with ethyl acetoacetate and urea to afford the corresponding 3,4‐dihydropyrimidin‐2‐(1H)‐ones under solvent‐free conditions. ZIF‐9(NH₂) and the prepared nanocatalyst PTA@ZIF‐9(NH₂) were characterized by XRD, FESEM, TEM, EDX, BET, AAS, TGA, UV–Vis, and FT‐IR. After reaction, the nanocatalyst can be easily separated from the reaction mixture by centrifuge and the recovered catalyst can be reused for at least five times with a 14% reduction in yield after the fifth run. This study showed that ZIF‐9(NH₂) can be utilized as a promising support for PTA and developed a highly active, stable and reusable heterogeneous catalyst under easy reaction condition in the multi‐component organic synthesis.     

An efficient and new protocol for the Heck reaction using palladium nanoparticle‐engineered dibenzo‐18‐crown‐6‐ether/MCM‐41 nanocomposite in water

Palladium nanoparticle‐incorporated mesoporous organosilica (MCM‐41‐Crown.Pd) was synthesized via the grafting of dibenzo‐18‐crown‐6‐ether moieties on the MCM‐41 surface, followed by reaction of the nanocomposite with palladium acetate and then its reduction in ethanol. The cavity of the immobilized dibenzo‐18‐crown‐6 as host material can stabilize the palladium nanoparticles effectively and prevent their aggregation and separation from the surface. The structure of the nanocomposite was characterized using various techniques. The catalytic properties of the nanocomposite in the Heck coupling reaction, one of the most useful transformations in organic synthesis, between aryl halides and olefins in water were also explored. The main advantages of the method are low cost, high yields, easy work‐up and short reaction time. The nanocatalyst can be easily separated from a reaction mixture and was successfully examined for seven runs, with a slight loss of catalytic activity.