Synthesis of noble‐metal‐free ternary K7HNb6O19/Cd0.5Zn0.5S/g‐C3N4 tandem heterojunctions for efficient photocatalytic performance under visible light

Exploring noble‐metal‐free, highly active and durable catalysts is vital to get to grips with the energy and environmental issues. Herein, we first dexterously design and synthesize a class of ternary Nb₆/CZS/g‐CN photocatalysts for the removal of hexavalent chromium Cr (VI) and organic dye pollutant (MO) from wastewater under visible‐light irradiation. A heterojunction Nb₆–1/CZS/g‐CN loaded with 0.01 g K₇HNb₆O₁₉ showed excellent photocatalytic performance, with the MO photodegradation efficiency of 94% in 1 h and the Cr (VI) (150 mg/l) photoreduction efficiency as high as 91% in 2 hr. The main active species were deemed to be O₂^.‐. Additionally, the as‐prepared ternary heterojunction exhibits superior hydrogen evolution reaction (HER) rate. A heterojunction Nb₆–4/CZS/g‐CN loaded with 0.5 g K₇HNb₆O₁₉ exhibited the highest H₂ evolution rate as high as 1777.86 μmol h^?1 g^?1 under visible‐light illumination, which is increased to 5.7 and 2.7 times that of bare CZS and biphase heterojunction CZS/g‐CN_. These findings afford a new class of promising low‐cost photocatalyst bodying for its huge potential value in sustainable energy development and wastewater treatment.     

A New p‐Metal‐n Structure AgBr‐Ag‐BiOBr with Superior Visible‐Light‐Responsive Catalytic Performance

A novel visible‐light‐driven AgBr‐Ag‐BiOBr photocatalyst was synthesized by a facile hydrothermal method. Taking advantage of both p‐n heterojunctions and localized surface plasmon resonance, the p‐metal‐n structure exhibited a superior performance concerning degradation of methyl orange under visible‐light irradiation (λ>420 nm). A possible photodegradation mechanism in the presence of AgBr‐Ag‐BiOBr composites was proposed, and the radical species involved in the degradation reaction were investigated. HO₂^?/^?O₂^? played the same important role as ^?OH in the AgBr‐Ag‐BiOBr photocatalytic system, and both the electron and hole were fully used for degradation of organic pollutants. A dual role of metallic Ag in the photocatalysis was proposed, one being surface plasmon resonance and the other being an electron‐hole bridge. Due to the distinctive p‐metal‐n structure, the visible‐light absorption, the separation of photogenerated carriers and the photocatalysis efficiency were greatly enhanced.     

Photocatalytic degradation of norfloxacin and its intermediate degradation products using nitrogen‐doped activated carbon–CuS nanocomposite assisted by visible irradiation

We have synthesized a nitrogen‐doped activated carbon (NAC) derived from oak using KOH and N₂ thermal treatment at 400 °C as well as CuS nanoparticles. The NAC was decorated with the synthesized CuS to apply as a photocatalyst for degradation of norfloxacin (NOR). Before its application for photodegradation, the adsorbent/photocatalyst structural properties were investigated using X‐ray diffraction, X‐ray photoelectron spectroscopy, Raman spectroscopy and scanning electron microscopy. The photocatalytic degradation of NOR was successfully done under visible light using NAC–CuS. The results revealed that the investigated fluoroquinolone degraded very efficiently and pseudo‐first‐order kinetics was adopted for the photodegradation process. In addition, isothermal studies showed that the adsorption process in darkness followed the Langmuir model. The degradation characteristics of the NAC–CuS photocatalyst were studied for 120 min and 15 h under visible light for degradation of NOR, exhibiting a good efficiency for NOR removal. During 120 min of degradation, some intermediate degradation products that can be considered as secondary pollutants were produced. Then, to degrade these pollutants the radiation time was increased up to 15 h. The results displayed a perfect degradation of NOR and its secondary pollutants. The effective variables including pH, degradation time and photocatalyst dosage were optimized and studied in a multivariate method using Design Expert 7. Determination of photodegradation products was carried out using liquid chromatography–mass spectrometry. The results are of significance for estimating the environmental fate of NOR in aqueous media.     

Synthesis,characterization and photocatalytic application of TiO2/magnetic graphene for efficient photodegradation of crystal violet

A magnetized nano‐photocatalyst based on TiO₂/magnetic graphene was developed for efficient photodegradation of crystal violet (CV). Scanning electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy and elemental mapping were used to characterize the prepared magnetic nano‐photocatalyst. The photocatalytic activity of the synthesized magnetic nano‐photocatalyst was evaluated using the decomposition of CV as a model organic pollutant under UV light irradiation. The obtained results showed that TiO₂/magnetic graphene exhibited much higher photocatalytic performance than bare TiO₂. Incorporation of graphene enhanced the activity of the prepared magnetic nano‐photocatalyst. TiO₂/magnetic graphene can be easily separated from an aqueous solution by applying an external magnetic field. Effects of pH, magnetized nano‐photocatalyst dosage, UV light irradiation time, H₂O₂ amount and initial concentration of dye on the photodegradation efficiency were evaluated and optimized. Efficient photodegradation (>98%) of the selected dye under optimized conditions using the synthesized nano‐photocatalyst under UV light irradiation was achieved in 25 min. The prepared magnetic nano‐photocatalyst can be used in a wide pH range (4–10) for degradation of CV. The effects of scavengers, namely methanol (OH^? scavenger), p‐benzoquinone (O₂^?? scavenger) and disodium ethylenediaminetetraacetate (hole scavenger), on CV photodegradation were investigated.     

Yolk–shell microspheres assembled from Preyssler‐type NaP5W30O11014− polyoxometalate and MIL‐101(Cr) metal–organic framework: A new inorganic–organic nanohybrid for fast and selective removal of cationic organic dyes from aqueous media

Novel inorganic–organic yolk–shell microspheres based on Preyssler‐type NaP₅W₃₀O₁₁₀^14? polyoxometalate and MIL‐101(Cr) metal–organic framework (P₅W₃₀/MIL‐101(Cr)) were synthesized by reaction of K_12.5Na_1.5[NaP₅W₃₀O₁₁₀], Cr(NO₃)₃·9H₂O and terephthalic acid under hydrothermal conditions at 200°C for 24 h. The as‐prepared yolk–shell microspheres were fully characterized using various techniques. All analyses confirmed the incorporation of the Preyssler‐type NaP₅W₃₀O₁₁₀^14? polyoxometalate into the three‐dimensional porous MIL‐101(Cr) metal–organic framework. The results revealed that P₅W₃₀/MIL‐101(Cr) demonstrated rapid adsorption of cationic methylene blue (MB) and rhodamine B (RhB) with ultrahigh efficiency and capacity, as well as achieving rapid and highly selective adsorption of MB from MB/MO (MO = methyl orange), MB/RhB and MB/RhB/MO mixtures. The P₅W₃₀/MIL‐101(Cr) adsorbent not only exhibited a high adsorption capacity of 212 mg g^?1, but also could quickly remove 100% of MB from a dye solution of 50 mg l^?1 within 8 min. The effects of some key parameters such as adsorbent dosage, initial dye concentration and initial pH on dye adsorption were investigated in detail. The equilibrium adsorption data were better fitted by the Langmuir isotherm. The adsorption kinetics was well modelled using a pseudo‐second‐order model. Also, the inorganic–organic hybrid yolk–shell microspheres could be easily separated from the reaction system and reused up to four times without any change in structure or adsorption ability. The stability and robustness of the adsorbent were confirmed using various techniques.     

Anthraquinone Redox Relay for Dye‐Sensitized Photo‐electrochemical H2O2 Production

Anthraquinone (AQ) redox mediators are introduced to metal‐free organic dye sensitized photo‐electrochemical cells (DSPECs) for the generation of H₂O₂. Instead of directly reducing O₂ to produce H₂O₂, visible‐light‐driven AQ reduction occurs in the DSPEC and the following autooxidation with O₂ allows H₂O₂ accumulation and AQ regeneration. In an aqueous electrolyte, under 1 sun conditions, a water‐soluble AQ salt is employed with the highest photocurrent of up to 0.4 mA cm^?2 and near‐quantitative faradaic efficiency for producing H₂O₂. In a non‐aqueous electrolyte, under 1 sun illumination, an organic‐soluble AQ is applied and the photocurrent reaches 1.8 mA cm^?2 with faradaic efficiency up to 95 % for H₂O₂ production. This AQ‐relay DSPEC exhibits the highest photocurrent so far in non‐aqueous electrolytes for H₂O₂ production and excellent acid stability in aqueous electrolytes, thus providing a practical and efficient strategy for visible‐light‐driven H₂O₂ production.     

Integrated Adsorption–Photodegradation of Organic Pollutants by Carbon Xerogel/Titania Composites

Recent studies on the removal of pollutants via adsorption include the use of carbon-based adsorbents, due to their high porosity and large surface area; however, such materials lack photoactive properties. This study evaluates the synergistic effect of integrated mesoporous carbon xerogel (derived from resorcinol formaldehyde) and titanium dioxide (TiO₂) for combined adsorption and photodegradation application. The complex formed between carbon xerogel and TiO₂ phase was investigated through FTIR, proving the presence of a Ti-O–C chemical linkage. The physicochemical properties of the synthesised adsorbent–photocatalyst were probed using FESEM, BET analysis and UV–Vis analysis. The kinetics, equilibrium adsorption, effect of pH, and effect of adsorbent dosage were investigated. The expansion of the absorbance range to the visible range was verified, and the corresponding band gap evaluated. These properties enabled a visible light response when the system was exposed to visible light post adsorption. Hence, an assistive adsorption–photodegradation phenomenon was successfully executed. The adsorption performance exhibited 85% dye degradation which improved to 99% following photodegradation. Further experiments showed the reduction of microorganisms under visible light, where no microbial colonies were observed after treatment, indicating the potential application of these composite materials.     

Visible‐Light‐Mediated Generation of Nitrogen‐Centered Radicals: Metal‐Free Hydroimination and Iminohydroxylation Cyclization Reactions

The formation and use of iminyl radicals in novel and divergent hydroimination and iminohydroxylation cyclization reactions has been accomplished through the design of a new class of reactive O‐aryl oximes. Owing to their low reduction potentials, the inexpensive organic dye eosin Y could be used as the photocatalyst of the organocatalytic hydroimination reaction. Furthermore, reaction conditions for a unique iminohydroxylation were identified; visible‐light‐mediated electron transfer from novel electron donor–acceptor complexes of the oximes and Et₃N was proposed as a key step of this process.     

Visible‐Light‐Induced Photoredox Catalysis of Dye‐Sensitized Titanium Dioxide: Selective Aerobic Oxidation of Organic Sulfides

TiO₂ photoredox catalysis has recently attracted much interest for use in performing challenging organic transformations under mild reaction conditions. However, the reaction scheme is hampered by the fact that TiO₂ can only be excited by UV light of wavelengths λ shorter than 385 nm. One promising strategy to overcome this issue is to anchor an organic, preferably metal‐free dye onto the surface of TiO₂. Importantly, we observed that the introduction of a catalytic amount of the redox mediator TEMPO [(2,2,6,6‐tetramethylpiperidin‐1‐yl)oxyl] ensured the stability of the anchored dye, alizarin red S, thereby resulting in the selective oxidation of organic sulfides with O₂. This result affirms the essential role of the redox mediator in enabling the organic transformations by visible‐light photoredox catalysis.     

Sunlight-Active BiOI Photocatalyst as an Efficient Adsorbent for the Removal of Organic Dyes and Antibiotics from Aqueous Solutions

A bismuth oxyiodide (BiOI) photocatalyst with excellent sunlight-driven performance was synthesized by a solvothermal route without the addition of surfactants or capping agents. The prepared photocatalyst exhibited a tetragonal phase with an energy band gap of 2.15 eV. The efficiency of the photocatalyst was elucidated by monitoring the photodegradation of organic dyes and antibiotics. The BiOI photocatalyst provided a 95% removal of norfloxacin (NOR) antibiotics under visible light illumination. Interestingly, the complete removal of Rhodamine B (RhB) dye was achieved after 80 min of natural sunlight irradiation. The photodegradation reaction followed the first-order reaction. Both photo-generated holes and electrons play vital roles in the photodegradation of the pollutant. The BiOI photocatalyst remains stable and still shows a high efficiency even after the fifth run. This confirms the great cycling ability and high structural stability of the photocatalyst. The prepared BiOI catalyst, with a high surface area of 118 m² g⁻¹, can act as an excellent adsorbent as well. The synergistic effect based on both adsorption and photocatalysis is a key factor in achieving a very high removal efficiency. The photoactivity under sunlight is higher than that observed under visible light, supporting the practical use of the BiOI photocatalyst for the removal of organic pollutants in wastewater through the utilization of abundant solar energy.     

Ionic‐Liquid‐Assisted Synthesis of Uniform Fluorinated B/C‐Codoped TiO2 Nanocrystals and Their Enhanced Visible‐Light Photocatalytic Activity

Exploiting advanced photocatalysts under visible light is of primary significance for the development of environmentally relevant photocatalytic decontamination processes. In this study, the ionic liquid (IL), 1‐butyl‐3‐methylimidazolium tetrafluoroborate, was employed for the first time as both a structure‐directing agent and a dopant for the synthesis of novel fluorinated B/C‐codoped anatase TiO₂ nanocrystals (T_IL) through hydrothermal hydrolysis of tetrabutyl titanate. These T_IL nanocrystals feature uniform crystallite and pore sizes and are stable with respect to phase transitions, crystal ripening, and pore collapse upon calcination treatment. More significantly, these nanocrystals possess abundant localized states and strong visible‐light absorption in a wide range of wavelengths. Because of synergic interactions between titania and codopants, the calcined T_IL samples exhibited high visible‐light photocatalytic activity in the presence of oxidizing Rhodamine B (RhB). In particular, 300 °C‐calcined T_IL was most photocatalytically active; its activity was much higher than that of TiO_1.98N_0.02 and reference samples (T_W) obtained under identical conditions in the absence of ionic liquid. Furthermore, the possible photocatalytic oxidation mechanism and the active species involved in the RhB degradation photocatalyzed by the T_IL samples were primarily investigated experimentally by using different scavengers. It was found that both holes and electrons, as well as their derived active species, such as ^.OH, contributed to the RhB degradation occurring on the fluorinated B/C‐codoped TiO₂ photocatalyst, in terms of both the photocatalytic reaction dynamics and the reaction pathway. The synthesis of the aforementioned novel photocatalyst and the identification of specific active species involved in the photodegradation of dyes could shed new light on the design and synthesis of semiconductor materials with enhanced photocatalytic activity towards organic pollutants.     

Nanoflower‐Like Bi2WO6 Encapsulated in ORMOSIL as a Novel Photocatalytic Antifouling and Foul‐Release Coating

Herein, the first multi‐purpose antifouling and foul‐release photocatalytic coating based on ORMOSIL thin films doped with nanoflower‐like Bi₂WO₆ is described. Irradiation with visible light of the new films immersed in water produces significant amounts of H₂O₂ by photocatalytic oxidation of water, and allows the degradation of (bio)organic pollutants at the outer surface of the xerogel film.     

Hydrothermal synthesis of magnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>–nitrogen-doped graphene hybrid composite and its application as photocatalyst in degradation of methyl orange and methylene blue dyes in presence of copper (II) ions

Nanocomposite of Fe₃O₄–nitrogen-doped graphene (Fe₃O₄–NG) was synthesized by single step hydrothermal method. The as-synthesized composite was characterised by various techniques such as powder X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry and thermal analysis (TGA). The catalytic role of synthesized nanocomposite in visible light induced photodegradation of methyl orange (MO; acidic dye) and methylene blue (MB; basic dye) was explored. The role of Cu(II) ions on the photodegradation of the organic dyes was also monitored. Cu(II) ions enhance the photocatalytic activity of nanocomposite by capturing photoelectron, thereby quenching the recombination process of electron–hole pair in photocatalyst.     

Multi‐Electron Oxygen Reduction by a Hybrid Visible‐Light‐Photocatalyst Consisting of Metal‐Oxide Semiconductor and Self‐Assembled Biomimetic Complex

Adsorption experiments and density functional theory (DFT) simulations indicated that Cu(acac)₂ is chemisorbed on the monoclinic sheelite (ms)‐BiVO₄ surface to form an O₂‐bridged binuclear complex (OBBC/BiVO₄) like hemocyanin. Multi‐electron reduction of O₂ is induced by the visible‐light irradiation of the OBBC/BiVO₄ in the same manner as a blue Cu enzyme. The drastic enhancement of the O₂ reduction renders ms‐BiVO₄ to work as a good visible‐light photocatalyst without any sacrificial reagents. As a model reaction, we show that this biomimetic hybrid photocatalyst exhibits a high level of activity for the aerobic oxidation of amines to aldehydes in aqueous solution and imines in THF solution at 25 °C giving selectivities above 99 % under visible‐light irradiation.     

Host (nanocavity of dealuminated Y zeolite)-guest (Ce(IV) salophen/TiO<Subscript>2</Subscript>) nanocomposite materials as an efficient photocatalyst for degradation of 4-nitrophenol

Ce(IV) salophen encapsulated into dealuminated Y zeolite was prepared by the flexible ligand method. Incorporation of TiO₂ into nanocages of dealuminated Y zeolite was performed by the impregnation method. The obtained photocatalyst was characterized by FT-IR, XRD, DRS, SEM, EDS and ICP techniques. The amount of Ce(salophen) in the zeolite supercages was 0.07 mg/g of encapsulated zeolite. This catalytic system was investigated in the photodegradation of 4-nitrophenol. In this work, the effect of dark conditions, and visible and UV illumination was investigated for the degradation of 4-nitrophenol. In addition, the effect of other parameters including catalyst loading, H₂O₂ and TiO₂ was studied in the degradation of 4-nitrophenol. The obtained results reveal that the photocatalyst performance depends on catalyst loading, the presence of H₂O_2, and UV illumination.     

Silver ferrite–graphene nanocomposite and its good photocatalytic performance in air and visible light for organic dye removal

Silver ferrite–graphene (AgFeO₂‐G) as a nanocomposite photocatalyst shows potent visible‐light photocatalytic activity for the degradation of organic contaminants, and generates the strong oxidants hydroxyl radical (^•OH) and superoxide anion radical (O₂^•−) via photoelectrochemical decomposition of H₂O and O₂ in the presence of air and visible light irradiation. The photogenerated electrons of AgFeO₂ can transfer easily from the conduction band to the reduced graphene oxide, efficiently preventing the direct recombination of electrons and holes. As a matter of fact, AgFeO₂ has a low bandgap. Furthermore, AgFeO₂ nanoparticles themselves have a magnetic property, which makes them magnetically separable. The experimental results show that the graphene nanosheets in the nanocomposite catalyst are exfoliated and decorated homogeneously with AgFeO₂ nanoparticles. The photodegradation occurs in a short time (ca 40 min). Also, the photocatalytic activity of the nanocomposite does not show any clear loss after ten recycles of the degradation process.     

A Methylthio‐Functionalized‐MOF Photocatalyst with High Performance for Visible‐Light‐Driven H2 Evolution

Recently, the emergence of photoactive metal–organic frameworks (MOFs) has given great prospects for their applications as photocatalytic materials in visible‐light‐driven hydrogen evolution. Herein, a highly photoactive visible‐light‐driven material for H₂ evolution was prepared by introducing methylthio terephthalate into a MOF lattice via solvent‐assisted ligand‐exchange method. Accordingly, a first methylthio‐functionalized porous MOF decorated with Pt co‐catalyst for efficient photocatalytic H₂ evolution was achieved, which exhibited a high quantum yield (8.90 %) at 420 nm by use sacrificial triethanolamine. This hybrid material exhibited perfect H₂ production rate as high as 3814.0 μmol g^?1 h^?1, which even is one order of magnitude higher than that of the state‐of‐the‐art Pt/MOF photocatalyst derived from aminoterephthalate.     

Two‐Dimensional Perovskite Oxynitride K2LaTa2O6N with an H+/K+ Exchangeability in Aqueous Solution Forming a Stable Photocatalyst for Visible‐Light H2 Evolution

Undoped layered oxynitrides have not been considered as promising H₂‐evolution photocatalysts because of the low chemical stability of oxynitrides in aqueous solution. Here, we demonstrate the synthesis of a new layered perovskite oxynitride, K₂LaTa₂O₆N, as an exceptional example of a water‐tolerant photocatalyst for H₂ evolution under visible light. The material underwent in‐situ H⁺/K⁺ exchange in aqueous solution while keeping its visible‐light‐absorption capability. Protonated K₂LaTa₂O₆N, modified with an Ir cocatalyst, exhibited excellent catalytic activity toward H₂ evolution in the presence of I^? as an electron donor and under visible light; the activity was six times higher than Pt/ZrO₂/TaON, one of the best‐performing oxynitride photocatalysts for H₂ evolution. Overall water splitting was also achieved using the Ir‐loaded, protonated K₂LaTa₂O₆N in combination with Cs‐modified Pt/WO₃ as an O₂ evolution photocatalyst in the presence of an I₃^?/I^? shuttle redox couple.     

Preparation,characterization and photocatalytic performance of polyoxometalate / polyaniline / titania ternary composite

A new CoW₁₁Mn/PANI/TiO₂ ternary composite was synthesized with K₈[Co(H₂O)MnW₁₁O₃₉] (CoW₁₁Mn) and PANI/TiO₂ by electrostatic self-assembly. These catalysts were characterized using infrared (IR) spectroscopy, X-ray diffraction, scanning electron microscopy, ultraviolet–visible spectroscopy, and N₂ adsorption–desorption. CoW₁₁Mn/PANI/TiO₂ was used to photodegradate the example contaminant, gentian violet (GV). Under the optimum photodegradation conditions, 92.63% degradation was achieved, indicating that the introduction of polyoxometalate and polyaniline greatly enhanced the photocatalytic performance of the catalyst. Moreover, CoW₁₁Mn/PANI/TiO₂ exhibits stable performance with little loss in activity after three successive runs. Thus, CoW₁₁Mn/PANI/TiO₂ ternary composite could be a promising photocatalyst in photodegradation of organic pollutants.     

Improvement of the Visible‐Light Photocatalytic Performance of TiO2 by Carbon Mesostructures

An improvement in the photodegradation performance for dyes due to interaction between carbon and titania in a self‐assembled mesoporous C? TiO₂ composite catalyst, even for the difficult degradation of azo dyes, is reported herein. The dye removal process involves adsorption of the dye from water by the mesoporous carbon–titania, followed by photodegradation on the separated dye‐loaded solid. Such adsorption–catalysis cycles can be carried out more than 80 times without discernible loss of photocatalytic activity or the anatase content of the composite. In each run, about 120 mg dye per g catalyst can be degraded. The mesoporous carbon–titania catalyst also exhibits a high capacity for converting methyl orange in aqueous solution under visible light. Characterization by XRD, TEM, and N₂ sorption techniques has revealed that the self‐assembled composite catalyst has an ordered mesostructure, uniform mesopores (4.3 nm), a large pore volume (0.30 cm³ g^?1), and a high surface area (348 m² g^?1). The pore walls are composed of amorphous carbon and anatase nanoparticles of size 4.2 nm, which are well dispersed and confined. X‐ray photoelectron spectroscopy (XPS), surface photovoltage spectroscopy (SPS), and UV/Vis absorption results indicate doping of carbon into the anatase lattice and a change in the bandgap of the semiconductor. The synergistic improvement in the composite catalyst can be attributed to the following features: (1) carbon doping of the anatase lattice modifies its bandgap and enhances its activity under visible light; (2) confinement within carbon pore walls prevents aggregation of tiny anatase nanoparticles, improving their activity and stability; (3) the mesopores provide a confined space for photocatalysis; and (4) the strong adsorption ability of porous carbon for organic substances ensures that large quantities can be processed and inhibits further diffusion of the adsorbed organic substances, thereby enhancing the mineralization on anatase.