Highly efficient orthopalladated complexes of second and third benzyl amine for catalyzing the Suzuki cross‐coupling reaction

In this work, ortho‐palladated complexes [Pd(µ‐Cl)(C₆H₄CH₂ NRR′‐κ²‐C,N)]₂ and [Pd(C₆H₄CH₂NH₂‐2‐C,N)Cl(Y)] were tested in the Suzuki–Miyaura cross‐coupling reaction. Cyclopalladated Pd(II) complexes as thermally stable catalysts can activate aryl bromides and chlorides. These complexes were active and efficient catalysts for the Suzuki–Miyaura reaction of aryl bromides and even less reactive aryl chlorides. The cross‐coupled products of a variety of aryl bromides and aryl chloride with phenylboronic acid in methanol as solvent at 60 °C were produced in excellent yields. Copyright © 2010 John Wiley & Sons, Ltd.     

N‐Heterocyclic carbene/phosphite synergistically assisted Pd/C‐catalyzed Suzuki coupling of aryl chlorides

An N‐heterocyclic carbene and phosphite synergistically enhanced Pd/C catalyst system has been developed for Suzuki coupling of aryl chlorides and aryl boronic acids from commercially available Pd/C with sterically demanding N,N′‐bis(2,6‐diisopropylphenyl)imidazolylidene and trimethylphosphite. A remarkable increase in catalytic activity of Pd/C was observed when used along with 1 equiv. N,N′‐bis(2,6‐diisopropylphenyl)imidazolium chloride and 2 equiv. phosphite with respect to palladium in appropriate solvents that were found to play a crucial role in Pd/C‐NHC‐P(OR)₃‐catalyzed Suzuki coupling. A dramatic ortho‐substitution effect of carbonyl and nitrile groups in aryl chlorides was observed and explained by a modified quasi‐heterogeneous catalysis mechanism. The Pd/C catalyst could be easily recovered from reaction mixtures by simple filtration and only low palladium contamination was detected in the biparyl products. A practical process for the synthesis of 4‐biphenylcarbonitrile has therefore been developed using the N‐heterocyclic carbene/phosphite‐assisted Pd/C‐catalyzed Suzuki coupling. Copyright © 2013 John Wiley & Sons, Ltd.     

Pd(0)‐Catalyzed Tandem One‐Pot Reaction of Biphenyl Ketones/Aldehydes to the Corresponding Di‐substituted Aryl Olefins

Synthesis of di‐substituted aryl olefins via a Pd(0)‐catalyzed cross‐coupling reaction of biphenyl ketones/aldehydes, tosylhydrazide, and aryl bromides (or benzyl halides) was developed. This methodology was achieved by one‐pot two‐step reactions involving the preparation of N ‐tosylhydrazones by reacting tosylhydrazide with biphenyl ketones/aldehydes, followed by coupling with aryl bromides (or benzyl halides) in the presence of Pd(PPh₃ )₄ and lithium t ‐butoxide to produce various di‐substituted aryl olefins in moderate to good yields.     

Short communication: An alternative and effective catalyst in the stereo‐specific reaction of Z‐1‐aryl‐1‐stannyl‐2‐silylethenes with allyl bromide

The Pd(dba)₂‐catalyzed reaction of Z‐1‐aryl‐1‐(tributylstannyl)‐2‐(trimethylsilyl)ethenes with allyl bromide in the presence of copper(I) iodide is reported for the first time. The reaction in the presence of 0.5 mol% Pd(dba)₂ and 8 mol% CuI in dimethylformamide takes place at room temperature to give E‐2‐aryl‐1‐(trimethylsilyl)penta‐1,4‐dienes exclusively in isolated yields of 62–99%. A putative reaction mechanism is proposed. Copyright © 2005 John Wiley & Sons, Ltd.     

In Situ Generation of ArCu from CuF2 Makes Coupling of Bulky Aryl Silanes Feasible and Highly Efficient

A bimetallic system of Pd/CuF₂, catalytic in Pd and stoichiometric in Cu, is very efficient and selective for the coupling of fairly hindered aryl silanes with aryl, anisyl, phenylaldehyde, p‐cyanophenyl, p‐nitrophenyl, or pyridyl iodides of conventional size. The reaction involves the activation of the silane by Cu^II, followed by disproportionation and transmetalation from the Cu^I(aryl) to Pd^II, upon which coupling takes place. Cu^III formed during disproportionation is reduced to Cu^I(aryl) by excess aryl silane, so that the CuF₂ system is fully converted into Cu^I(aryl) and used in the coupling. Moreover, no extra source of fluoride is needed. Interesting size selectivity towards coupling is found in competitive reactions of hindered aryl silanes. Easily accessible [PdCl₂(IDM)(AsPh₃)] (IDM = 1,3‐dimethylimidazol‐2‐ylidene) is by far the best catalyst, and the isolated products are essentially free from As or Pd (<1 ppm). The mechanistic aspects of the process have been experimentally examined and discussed.     

Solvent‐Free,Palladium‐Catalyzed Suzuki–Miyaura Cross‐Couplings of Aryl Chlorides with Arylboronic Acids

Pd(MeCN)₂Cl₂/PCy₃ was found to be an efficient catalytic system for the Suzuki–Miyaura cross‐couplings of aryl chlorides with arylboronic acids under solvent‐free conditions. Furthermore, the presence of the conventional solvents had deleterious effect on the reaction. In the presence of Pd(MeCN)₂Cl₂, PCy₃, and TBAF (tetra‐n‐butylammonium fluoride), a number of aryl chlorides including heteroaryl chlorides were coupled with arylboronic acids or heteroarylboronic acids smoothly to afford the corresponding products in moderate to excellent yields.     

氯化钯在氟化四丁基铵中当场生成纳米钯：一种高效、可回收的催化体系，在无配体和无溶剂条件下催化Suzuki-Miyaura反应

氯化钯在氟化四丁基铵中当场生成纳米钯,该钯催化剂在Suzuki-Miyaura交叉偶联反应中显示很高的催化效率。在氯化钯和氟化四丁基铵存在下,许多芳基卤代烃可以顺利与芳基硼酸发生偶联反应,得到中等到高的产率。此外,在Suzuki-Miyaura偶联反应中该氯化钯/氟化四丁基铵催化体系可以回收重复使用多次,并且芳基溴代烃可以在15-60分钟内反应完全。值得指出的是,该反应是在无溶剂、无配体和催化体系可回收重复使用的条件下进行的。这和无配体条件下TBAB中钯催化卤代芳烃与芳基硼酸的Suzuki-Miyaura交叉偶联反应方法。该氯化钯/氟化四丁基铵催化反应的反应机理也进行了讨论。     

Water as a Hydride Source in Palladium‐Catalyzed Enantioselective Reductive Heck Reactions

Pd‐catalyzed intramolecular asymmetric carbopalladation of N ‐aryl acrylamides followed by reduction of C(sp³)‐Pd intermediate using diboron–water as a hydride source afforded enantioenriched 3,3‐disubstituted oxindoles in high yields and enantioselectivities. When heavy water was used as a deuterium donor in combination with bis(catecholato)diboron (Cat₂B₂), deuterium was incorporated into the products with high synthetic efficiency. The ligand determined both the enantioselectivity of the reaction and the reaction pathways, thereby affording either hydroarylation (reductive Heck) or carboborylation products.     

N‐heterocyclic carbene–palladium(II) complex supported on magnetic mesoporous silica for Heck cross‐coupling reaction

Magnetic mesoporous silica was prepared via embedding magnetite nanoparticles between channels of mesoporous silica (SBA‐15). The prepared composite (Fe₃O₄@SiO₂‐SBA) was then reacted with 3‐chloropropyltriethoxysilane, sodium imidazolide and 2‐bromopyridine to give 3‐(pyridin‐2‐yl)‐1H‐imidazol‐3‐iumpropyl‐functionalized Fe₃O₄@SiO₂‐SBA as a supported pincer ligand for Pd(II). The functionalized magnetic mesoporous silica was further reacted with [PdCl₂(SMe₂)₂] to produce a supported N‐heterocyclic carbene–Pd(II) complex. The obtained catalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, vibrating sample magnetometry, Brunauer–Emmett–Teller surface area measurement and X‐ray diffraction. The amount of the loaded complex was 80.3 mg g^?1, as calculated through thermogravimetric analysis. The formation of the ordered mesoporous structure of SBA‐15 was confirmed using low‐angle X‐ray diffraction and transmission electron microscopy. Also, X‐ray photoelectron spectroscopy confirmed the presence of the Pd(II) complex on the magnetic support. The prepared magnetic catalyst was then effectively used in the coupling reaction of olefins with aryl halides, i.e. the Heck reaction, in the presence of a base. The reaction parameters, such as solvent, base, temperature, amount of catalyst and reactant ratio, were optimized by choosing the coupling reaction of 1‐bromonaphthalene and styrene as a model Heck reaction. N‐Methylpyrrolidone as solvent, 0.25 mol% catalyst, K₂CO₃ as base, reaction temperature of 120°C and ultrasonication of the catalyst for 10 min before use provided the best conditions for the Heck cross‐coupling reaction. The best results were observed for aryl bromides and iodides while aryl chlorides were found to be less reactive. The catalyst exhibited noticeable stability and reusability.     

Decarboxylative Palladium(II)‐Catalyzed Synthesis of Aryl Amidines from Aryl Carboxylic Acids: Development and Mechanistic Investigation

A fast and convenient synthesis of aryl amidines starting from carboxylic acids and cyanamides is reported. The reaction was achieved by palladium(II)‐catalysis in a one‐step microwave protocol using [Pd(O₂CCF₃)₂], 6‐methyl‐2,2′‐bipyridyl and trifluoroacetic acid (TFA) in N‐methylpyrrolidinone (NMP), providing the corresponding aryl amidines in moderate to excellent yields. The protocol is very robust with regards to the cyanamide coupling partner but requires electron‐rich ortho‐substituted aryl carboxylic acids. Mechanistic insight was provided by a DFT investigation and direct ESI‐MS studies of the reaction. The results of the DFT study correlated well with the experimental findings and, together with the ESI‐MS study, support the suggested mechanism. Furthermore, a scale‐out (scale‐up) was performed with a non‐resonant microwave continuous‐flow system, achieving a maximum throughput of 11 mmol h^?1 by using a glass reactor with an inner diameter of 3 mm at a flow rate of 1 mL min^?1.     

在催化体系可回收和无配体条件下溴化四丁基铵中钯催化卤代芳烃与芳基硼酸的Suzuki-Miyaura交叉偶联反应

我们发展一种在催化体系可回收和无配体条件下溴化四丁基铵（TBAB）中钯催化卤代芳烃与芳基硼酸的Suzuki-Miyaura交叉偶联反应方法。我们发现水的量对反应有很大的影响。当水的用量为1 %（质量比）时,反应的结果最好。在3 mol%的醋酸钯和1.5 g的TBAB（含1%的水）,一系列卤代芳烃与芳基硼酸的顺利地发生Suzuki-Miyaura交叉偶联反应,得到中等及良好的产率。而且在溴代芳烃和活泼的氯代芳烃的交叉反应中,Pd(OAc)2/TBAB催化体系可以回收重复使用多次,并且催化活性基本不变。     

Preparations of Saturated N‐P‐N Type Secondary Phosphine Oxides and their Applications in Cross‐Coupling Reactions

A series of cyclohexane‐1,2‐diamine ( 3a – 3d ) and benzene‐1,2‐diamine derivatives ( 3e – 3h ) were pre‐ pared. Followed by hydrolysis, the reaction of 3a – 3c with PCl₃ successfully led to the formation of cor‐ responding metastable saturated heteroatom‐substituted secondary phosphine oxides (HASPO 4a – 4c ), a tautomer of the saturated heteroatom‐substituted phosphinous acid (HAPA). Whereas ambient‐stable diamine‐coordinated palladium complexes were obtained, HAPA‐coordinated palladium complexes were not successfully synthesized. The molecular structures of HASPO 4c , Pd(OAc)₂(3a) , PdBr₂(3b) and Pd(OAc)₂(3c) and [Cu(NO₃)(3d)⁺][NO₃ ^? ] were determined by single‐crystal X‐ray diffraction method. Catalysis of in‐situ Suzuki‐Miyaura cross‐coupling reactions for aryl bromides and phenylboronic acid using diamine 3a as ancillary ligand showed that the optimized reaction condition at 60 °C is the combination of 2 mmol % 3a /3.0 mmol KOH/1.0 mL 1,4‐dioxane/1 mmol % Pd(OAc)₂. Moreover, moderate reactivity was observed when using aryl chlorides as substrates (supporting infor‐ mation). When diamine 3d was employed in Heck reaction, good tolerance of functional groups of aryl bromides were observed while using 4‐bromoanisole and styrene as substrates. The optimized condi‐ tion for Heck reaction at 100 °C is 3 mmol % 3d /3.0 mmol CsF/1.0 mL toluene/3 mmol % Pd(OAc)₂. In general, cyclohexane‐1,2‐diamine derivatives exhibited better catalytic properties than those of benzene‐1,2‐diamines.     

Preparation and characterization of palladium immobilized on silica‐coated Fe3O4 and its catalytic performance for Suzuki reaction under microwave irradiation

Supported palladium catalyst (Pd/Fe₃O₄@SiO₂) was easily prepared by supporting PdCl₂ on silica‐coated magnetic nanoparticles Fe₃O₄ in ethylene glycol. The as‐prepared sample was characterized by infrared spectroscopy (IR), X‐ray diffraction (XRD) and X‐ray photoelectron spectrometer (XPS). The formation of active specie Pd(0) was confirmed by XRD and XPS, and the Pd loading for the fresh and recovered catalyst was determined by atomic absorption spectroscopy (AAS). Pd/Fe₃O₄@SiO₂ was employed for the synthesis of biphenyl derivatives via Suzuki reaction. In terms of the yield of biphenyl, the supported catalyst displayed nearly equal catalytic performance to that of homologous PdCl₂ under microwave irradiation for 30 min but higher than that obtained by traditional heating method for 12 h. The catalytic performance of Pd/Fe₃O₄@SiO₂ for Suzuki reactions involving various aryl halides and arylboronic acids were also examined. Impressive yield of biphenyl at 68.2% was obtained even in the presence of unreactive aryl chlorides. Pd/Fe₃O₄@SiO₂ was recovered by a permanent magnet and directly reused in the next run, and no obvious deactivation was observed for up to 6 times. Copyright © 2016 John Wiley & Sons, Ltd.     

Suzuki Coupling of Cyclopropylboronic Acid With Aryl Halides Catalyzed by a Palladium–Tetraphosphine Complex

The tetraphosphine all‐cis‐1,2,3,4‐tetrakis(diphenylphosphinomethyl)cyclopentane (Tedicyp) in combination with [Pd(C₃H₅)Cl]₂ affords a very efficient catalyst for the coupling of cyclopropylboronic acid with aryl bromides and aryl chlorides. Higher reactions rates were observed with aryl bromides than with aryl chlorides; however, even in the presence of 1–0.4% of catalyst, a few aryl chlorides gave the coupling products in good yields. A wide variety of substituents such as alkyl, methoxy, trifluoromethyl, acetyl, benzoyl, formyl, carboxylate, nitro, and nitrile on the aryl halides are tolerated. The coupling reaction of sterically very congested aryl bromides such as bromomesitylene or 2,4,6‐triisopropylbromobenzene also proceeds in good yields.     

Palladium‐Catalyzed Enantioselective Cacchi Reaction: Asymmetric Synthesis of Axially Chiral 2,3‐Disubstituted Indoles

We report herein the first examples of a palladium‐catalyzed enantioselective Cacchi reaction for the synthesis of indoles bearing a chiral C2‐aryl axis. In the presence of a catalytic amount of Pd(OAc)₂ and (R,R)‐QuinoxP* ligand, reaction of N‐aryl(alkyl)sulfonyl‐2‐alkynylanilides with arylboronic acids under oxygen atmosphere afforded enantioenriched 2,3‐disubstituted indoles in high yields and enantioselectivity. The indole ring is constructed de novo in this process and a complexation‐induced chirality transfer is proposed to account for the observed enantioselectivity.     

Room‐Temperature,Ligand‐ and Base‐Free Heck Reactions of Aryl Diazonium Salts at Low Palladium Loading: Sustainable Preparation of Substituted Stilbene Derivatives

The Pd(OAc)₂‐catalyzed Heck reaction of aryl diazonium salts with 2‐arylacrylates led to cis‐stilbenes with good to excellent stereoselectivity. The environmentally friendly protocol developed in this work features low palladium loading in technical‐grade methanol at room temperature under base‐, additive‐, and ligand‐free conditions. The same protocol applied to simple Heck coupling of aryl diazonium salts with methyl acrylate allows astonishingly low palladium loading, down to 0.005 mol %. The stereoselectivity experimentally observed for the synthesis of cis‐stilbenes has been rationalized by DFT calculations. Moreover, the role of methanol in promoting the reaction has been clarified by a computational study.     

Fluorous‐Silica‐Supported Perfluoro‐Tagged Palladium Complexes Catalyze Suzuki Couplings in Water

Different Pd‐complexes (see 2a – d and 3 ) with and without perfluoroalkyl tags were deposited on fluorous reversed‐phase silica 1 and unmodified silica gel. These supported complexes were successfully used as precatalysts for the Suzuki reaction in H₂O. H₂O‐Soluble aryl bromides were easily converted to the corresponding biphenyls. Although none of the complexes is H₂O‐soluble, the active catalyst is most likely homogeneously dissolved. Nevertheless, the Pd‐leaching into the product was low.     

Stereospecific synthesis of a family of novel (E)‐2‐aryl‐1‐silylalka‐1,4‐dienes or (E)‐4‐aryl‐5‐silylpenta‐1,2,4‐trienes via a cross‐coupling of (Z)‐silyl(stannyl)ethenes with allyl halides or propargyl bromide

Stereospecific synthesis of a family of novel (E)‐2‐aryl‐1‐silylalka‐1,4‐dienes or (E)‐4‐aryl‐5‐silylpenta‐1,2,4‐trienes via a cross‐coupling of (Z)‐silyl(stannyl)ethenes with allyl halides or propargyl bromide is described. In the reaction with allyl bromide, either a Pd(dba)₂? CuI combination (dba, dibenzylideneacetone) in DMF or copper(I) iodide in DMSO–THF readily catalyzes or mediates the coupling reaction of (Z)‐silyl(stannyl)ethenes at room temperature, producing novel vinylsilanes bearing an allyl group β to silicon with cis ‐disposition in good yields. Allyl chlorides as halides can be used in the CuI‐mediated reaction. CuI alone much more effectively mediates the cross‐coupling reaction with propargyl bromide in DMSO–THF at room temperature compared with a Pd(dba)₂? CuI combination catalysis in DMF, providing novel stereodefined vinylsilanes bearing an allenyl group β to silicon with cis ‐disposition in good yields. Copyright © 2008 John Wiley & Sons, Ltd.     

Application of ortho‐palladated homoveratrylamine complex containing mixed phosphorus–nitrogen donors in the Suzuki reaction

The catalytic activity of [Pd{C₆H₂(CH₂CH₂NH₂)‐(OMe)₂,3,4}Br(PPh₃)] monomeric ortho‐palladated complex of homoveratrylamine and triphenylphosphine was investigated in the Suzuki cross‐coupling reaction of various aryl halides with aryl boronic acids. The substituted biaryls were produced in excellent yields using a catalytic amount of this complex in ethanol at 60°C. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of regioregular poly(3‐octylthiophene)s via Suzuki polycondensation and end‐group analysis by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Regioregular poly(3‐octylthiophene)s were synthesized through a palladium‐catalyzed Suzuki polycondensation of 2‐(5‐iodo‐4‐octyl‐2‐thienyl)‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane. The effects of the palladium catalyst {tetrakis(triphenylphosphine)palladium(0) [Pd(PPh₃)₄], palladium(II) acetate [Pd(OAc)₂], [1, 1′‐bis(diphenylphosphino)ferrocene]dichloropalladium(II) [Pd(dppf)Cl₂], tris(dibenzylideneacetone)dipalladium(0), or bis(triphenylphosphine)palladium(II) dichloride [Pd(PPh₃)₂Cl₂]} and the reaction conditions (bases and solvents) were investigated. NMR spectroscopy revealed that poly(3‐octylthiophene)s prepared via this route were essentially regioregular. According to size exclusion chromatography, the highest molecular weights were obtained with in situ generated Pd(PPh₃)₄ and tetrakis(tri‐o‐tolylphosphine]palladium(0) {Pd[P(o‐Tol)₃]₄} catalysts or more reactive, phosphine‐free Pd(OAc)₂. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry was used to analyze end groups and allowed the determination of some mechanistic aspects of the Suzuki polycondensation. The polymers were commonly terminated with hydrogen or iodine as a result of deboronation and some deiodination. Pd(PPh₃)₄, Pd(PPh₃)₂Cl₂, and Pd[P(o‐Tol)₃]₄ induced aryl–aryl exchange reactions with the palladium center and resulted in some chains having phenyl‐ and o‐tolyl‐capped chain ends. Pd(dppf)Cl₂ yielded only one type of chain, and it had hydrogen end groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1454–1462, 2005