Well‐Defined N‐Heterocyclic Carbene‐Palladium Complexes as Efficient Catalysts for Domino Sonogashira Coupling/Cyclization Reaction and C‐H bond Arylation of Benzothiazole

Well‐defined and air‐stable PEPPSI (Pyridine Enhanced Precatalyst Preparation Stabilization and Initiation) themed palladium bis‐N‐heterocyclic carbene complexes have been developed for the domino Sonogashira coupling/cyclization reaction of 2‐iodophenol with a variety of terminal alkynes and C‐H bond arylation of benzothiazole with aryl iodides. The PEPPSI themed palladium complexes, 2a and 2b were synthesized in good yields from the reaction of corresponding imidazolium salts with PdCl₂ and K₂CO₃ in pyridine. The new air‐stable palladium‐NHC complexes were characterized by NMR spectroscopy, X‐ray crystallography, elemental analysis, and mass spectroscopy studies. The PEPPSI themed palladium(II) bis‐N‐heterocyclic carbene complexes 2a and 2b exhibited excellent catalytic activities for domino Sonogashira coupling/cyclization reaction of 2‐iodophenol with terminal alkynes yielding benzofuran derivatives. In addition, the palladium complexes, 2a and 2b successfully catalyzed the direct C‐H bond arylation of benzothiazole with aryl iodides as coupling partners in presence of CuI as co‐catalyst.     

Palladium(II)‐N‐Heterocyclic Carbene Complexes: Efficient Catalysts for the Direct C‐H Bond Arylation of Furans with Aryl Halides

This paper contains the synthesis and characterization of the seven new benzimidazolium salts and their corresponding new palladium(II)‐NHC complexes with the general formula [PdX₂(NHC)₂], (NHC = N‐heterocyclic carbene, X = Cl or Br), and also their catalytic activity in direct C‐H bond arylation of 2‐substituted furan derivatives with aryl bromides and aryl chlorides. Under the optimal conditions, these palladium(II)‐NHC complexes showed the good catalytic performance for the direct C‐H bond arylation of 2‐substituted furans with (hetero)aryl bromides, and with readily available and inexpensive aryl chlorides. The C‐H bond arylation regioselectively produced C5‐arylated furans by using 1 mol% of the palladium(II)‐NHC catalysts in moderate to high yields.     

Novel and efficient bridged bis(N-heterocyclic carbene)palladium(II) catalysts for selective carbonylative Suzuki–Miyaura coupling reactions to biaryl ketones and biaryl diketones

Bridged N,N′-substituted bisbenzimidazolium bromide salts (L1, L2, and L3) were synthesized and fully characterized. Reactions of palladium acetate with L1, L2, and L3 afforded corresponding new bridged bis(N-heterocyclic carbene)palladium(II) complexes (C1, C2, and C3) in high yields. The X-ray structure of complex C1 showed that the Pd(II) ion is bonded to the two carbon atoms of the bis(N-heterocyclic carbene) and two bromido ligands are in the cis position, resulting in a distorted square planar geometry. The three Pd(NHC)₂Br₂ complexes C1, C2, and C3 were evaluated in carbonylative Suzuki–Miyaura coupling reactions of aryl boronic acids with aryl halides and displayed high catalytic activity with low catalyst loading. The coupling reactions of aryl bromides were selective towards the carbonylation product at higher carbon monoxide pressure.     

Synthesis,structural characterization and catalytic activity of benzimidazole‐functionalized Pd(II) N‐heterocyclic carbene complexes

Two Pd(II)–NHC complexes bearing benzimidazole and pyridine groups have been successfully prepared and fully characterized by NMR and X‐ray diffraction analysis. The structure of palladium complexes are a typical square‐planar with palladium surrounded by two pairs of trans‐arranged benzimidazole and carbene ligands. The Pd–NHC complexes have been proved to be a highly efficient catalyst for the Mizoroki–Heck coupling reaction of aryl halides with various substituted acrylates under mild conditions in excellent yields. Copyright © 2013 John Wiley & Sons, Ltd.     

Acyclic Palladium(II)‐N‐heterocyclic Carbene Metallacrown Ether Complexes: Synthesis,Structure and Catalytic Activity

Novel acyclic Pd(II)‐N‐heterocyclic carbene (NHC) metallacrown ethers 5a , 5b have been synthesized. Reaction of the imidazolium salts bearing a long polyether chain with Ag₂O afforded Ag‐NHC complexes, which then reacted as carbene transfer agent with PdCl₂(MeCN)₂ to give the desired acyclic Pd(II)‐NHC metallacrown ether complexes 5a and 5b . The ¹H NMR and ¹³C NMR spectra show 5a and 5b exist as mixtures of cis and trans isomers in solution. The trans isomer of 5a was characterized by X‐ray diffraction, which clearly demonstrated two pseudo‐crown ether cavities in trans‐ 5a . Pd(II)‐NHC complexes 5a and 5b have been shown to be highly effective in the Suzuki‐Miyaura reactions of a variety of aryl bromides in neat water without the need of inert gas protection.     

Direct C—H Bond Activation of Benzoxazole and Benzothiazole with Aryl Bromides Catalyzed by Palladium(II)‐N‐heterocyclic Carbene Complexes

Herein, we report that a series of novel palladium(II)‐NHC complexes (NHC=N‐heterocyclic carbene) were synthesized. The structures of all novel complexes were characterized by ¹H NMR, ¹³C NMR, FT‐IR spectroscopy and elemental analysis techniques. These palladium(II)‐NHC complexes were tested as efficient catalysts in the direct C—H bond activation of benzoxazole and benzothiazole with aryl bromides in the presence of 1 mol% catalyst loading at 150 °C for 4 h. Under the given conditions, various aryl bromides were successfully applied as the arylating reagents to achieve the 2‐arylbenzoxazoles and 2‐arylbenzothiazoles in acceptable to high yields.     

Synthesis,characterization and catalytic activity in Suzuki–Miyaura coupling of palladacycle complexes with n‐butyl‐substituted N‐heterocyclic carbene ligands

A series of monomeric palladacycle complexes bearing n‐butyl‐substituted N‐heterocyclic carbenes, namely [Pd(NHC)X(dmba)] (dmba: dimethylbenzylamine and [Pd(NHC)X(ppy)]; NHC: 1‐n‐butyl‐3‐substituted benzylimidazol‐2‐ylidene; ppy: 2‐phenylpyridine), were prepared either by transmetallation from the corresponding silver carbene complexes or by the reaction of the corresponding acetate‐bridged palladacycle dimer with N‐heterocyclic carbene ligands in high yields. The palladium(II) complexes were characterized using elemental analyses, APCI‐MS, ¹H NMR and ¹³C NMR spectroscopies. These complexes are efficient in the Suzuki–Miyaura coupling reaction between phenylboronic acid and aryl bromides.     

Synthesis of silver(I) and palladium(II) <Emphasis Type="Italic">N</Emphasis>-heterocyclic carbene complexes and their use as catalysts for the direct C5 arylation of heteroaromatic compounds

Silver(I) N-heterocyclic carbene complexes were synthesized in good yields by the reactions of 1,3-dialkylperhydrobenzimidazolium salts with silver(I) oxide in dichloromethane. The silver complexes were used as carbene-transfer agents to synthesize palladium(II) N-heterocyclic carbene complexes. All of the complexes were characterized by physicochemical and spectroscopic methods. The new palladium complexes were tested as catalysts in the direct C5 arylation of 2-n-butylfuran, 2-n-butylthiophene and 2-n-propylthiazole with aryl bromides at 130 °C in N,N-dimethylacetamide. The arylation reactions proceeded selectively at the C5 position of the heteroaromatic compounds, and the corresponding coupling products were obtained in moderate to good yields by using 0.5 mol% of the palladium complex.     

Chiral nickel(II) and palladium(II) catalysts bearing strong electron‐withdrawing fluorine groups: synthesis,characterization and their application in catalytic polymerization for ethylene and styrene

A series of new chiral and achiral nickel(II) and palladium(II) complexes, {bis[N,N′‐(2,6‐diethyl‐4‐naphthylphenyl)imino]‐1,2‐dimethylethane}dibromonickel 3a , {bis[N,N′‐(4‐fluoro‐2‐methyl‐6‐sec‐phenethylphenyl)imino]‐1,2‐dimethylethane}dibromonickel rac‐(RS)‐ 3b , {bis[N,N′‐(4‐fluoro‐6‐sec‐phenethylphenyl)imino]‐1,2‐dimethylethane}dibromonickel rac‐(RR/SS)‐ 3c and {bis[N,N′‐(4‐fluoro‐6‐sec‐phenethylphenyl)imino]‐1,2‐dimethylethane}dichloropalladium rac‐(RR/SS)‐ 3d were successfully synthesized and characterized. The molecular structures of representative ligand rac‐(RS)‐ 2b , nickel complex 3a , rac‐(RR/SS)‐ 3c and palladium complex rac‐(RR/SS)‐ 3d were determined by X‐ray crystallography. The structures of complexes 3a and rac‐(RR/SS)‐ 3c have pseudo‐tetrahedral geometry about the nickel center, showing C₂ molecular symmetry. However, the structure of palladium complex rac‐(RR/SS)‐ 3d has pseudo‐square planar geometry about the palladium center, showing C₂ molecular symmetry. Complex 3e {bis[N,N′‐(2,6‐dimethylphenyl)imino]‐1,2‐dimethylethane}dibromonickel was also synthesized for comparison. Nickel complex rac‐(RS)‐ 3b bearing strong electron‐withdrawing fluorine group in the para‐aryl position and a chiral sec‐phenethyl group in the ortho‐aryl position of the ligand (one methyl group in the ortho‐aryl position) displays the highest catalytic activity for ethylene and styrene polymerization, and produced highly branched polyethylene and syndiotactic‐rich polystyrene. However, palladium complex rac‐(RR/SS)‐ 3d shows low catalytic activity for ethylene and styrene polymerization due to the poor leaving group, Cl, attached to palladium and the unfavorable molecular structure. Copyright © 2014 John Wiley & Sons, Ltd.     

Expedient Mechanosynthesis of N,N‐Dialkyl Imidazoliums and Silver(I)–Carbene Complexes in a Ball‐Mill

The absence of solvent, associated with intensive mechanical agitation, allowed the first mechanosynthesis of high‐value silver(I)–carbene complexes and the corresponding N,N‐dialkylimidazolium precursors. This procedure gave outstanding results in terms of yield and reaction time, when compared to solution‐based conditions previously described in literature, and was generalized to unprecedented compounds. Silver(I)–carbene complexes could either be obtained from N,N‐dialkylimidazolium salts or directly from imidazole and alkyl halides in a one‐pot two‐step procedure without isolating the imidazolium intermediate. Additionally, an efficient one‐pot three‐step sequence, including imidazole alkylation, silver metalation, and transmetalation is reported.     

(N‐Heterocyclic carbene)Pd(triethylamine)Cl2 as precatalyst for the synthesis of Poly(triarylamine)s

The use of a highly active, air‐, and moisture‐stable N‐heterocyclic carbene‐palladium(II) complex for the polymerization of anilines and aryl dibromides or dichlorides by Buchwald‐Hartwig coupling is presented. In comparison to previous catalytic systems, higher molecular weight polymers with improved yields were obtained in shorter reaction times. The first examples of fabrication of OFETs with polytriarylamines synthesized with aryl dichlorides and anilines are also presented. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4904–4911     

Rigid pyridyl substituted NHC ligands,their Pd(0) complexes and their application in selective transfer semihydrogenation of alkynes

The synthesis of an air‐stable series of Pd⁰ complexes with unsymmetric bidentate N‐pyridine N‐heterocyclic carbene ligands has been described. The carbenes were generated by synthesis of the silver(I) complexes from the imidazolium salts, followed by transmetallation of the C‐N ligands to obtain the target electron‐rich zerovalent palladium compounds. The bidentate coordination behaviour of the ligands was confirmed by ¹H, ¹³C NMR and X‐ray spectroscopy. The complexes are active precatalysts for the selective transfer semihydrogenation of alkynes to Z‐alkenes, with selectivities up to 99%. Copyright © 2011 John Wiley & Sons, Ltd.     

N‐heterocyclic carbene–palladium complexes for Suzuki–Miyaura coupling reaction with benzyl chloride and aromatic boronic acid leading to diarylmethanes

A family of N‐heterocyclic carbene–palladium(II)–N,N‐dimethylbenzylamine complexes ((NHC)LPdCl₂; L = N,N‐dimethylbenzylamine) were synthesized as well as characterized using single‐crystal X‐ray diffraction and spectroscopic data. These complexes exhibited higher catalytic activities for the Suzuki reaction of benzyl chlorides to afford diarylmethanes under milder conditions than other efficient (NHC)LPdCl₂ complexes. Using the optimum conditions, the expected coupling products were obtained in moderate to high yields. All reactions were carried out in air and all starting materials were used as supplied without purification.     

Palladium(II)-N-heterocyclic carbene-catalyzed direct C2- or C5-arylation of thiazoles with aryl bromides

Herein we report, a series of new benzimidazolium chlorides as N-heterocyclic carbene (NHC) ligand and their corresponding palladium(II)-NHC complexes with the general formula [PdCl₂(NHC)₂] were synthesized. All new compounds were characterized by ¹H NMR, ¹³C NMR, IR spectroscopy and elemental analysis techniques. The catalytic activity of palladium(II)-NHC complexes was investigated in the direct C2- or C5-arylation of thiazoles with aryl bromides in presence of palladium(II)-NHC at 150?°C for 1?h. These complexes exhibited the good catalytic performance for the direct arylation of thiazoles. The arylation of thiazoles regioselectively produced C2- or C5-arylated thiazoles in moderate to high yields.     

Synthesis of bis‐N‐alkyl imidazolium salts and their palladium(0)(NHC)(η2‐MA)2 complexes

New N‐Alkyl‐substituted imidazolium salts as well as a series of their corresponding [Pd(NHC)(MA)₂] complexes have been obtained by three routes in good yield. The previously reported synthesis for the analogous N‐aryl substituted [Pd(NHC)(MA)₂] complexes has been improved. The N‐alkyl‐substituted [Pd(NHC)(MA)₂] complexes are thermally more labile than their N‐aryl counterparts. Catalytic transfer semi‐hydrogenation of phenylpropyne resulted in good to excellent chemo‐ and stereo‐ selectivity conversion into (Z)‐phenylpropene. The size of the alkyl substituents correlates with the rate of hydrogenation in the sense that more bulky substituents give rise to faster transfer hydrogenation rates. Copyright © 2012 John Wiley & Sons, Ltd.     

Flexible,dicationic imidazolium salts for in situ application in palladium‐catalysed Mizoroki–Heck coupling of acrylates under aerobic conditions

The synthesis, characterization and in situ catalytic performance of new unsymmetric N,N′‐disubstituted imidazolium‐based dicationic salts in Mizoroki–Heck coupling of acrylates with aryl bromides under aerobic conditions are described. A series of flexible dicationic salts with varying steric and electronic properties were synthesized in good to excellent yields. All the salts were well characterized using spectroscopic techniques. X‐ray diffraction analysis of two salts with the same dicationic backbone and different counter anions shows that the ligand adopts two different conformations which are influenced by the nature of the anion. Thus, the ligand is capable of changing its conformation according to the change in environment due to its flexible nature. All the synthesized imidazolium salts were found to be active in in situ palladium‐catalysed Mizoroki–Heck coupling under aerobic conditions. Amongst the salts, the hydroxyl‐functionalized imidazolium salt, incorporating the features of both bidentate chelating O,O ligand and carbene, shows the maximum catalytic activity. A variety of aryl and heteroaryl methyl and ethyl cinnamates were synthesized using these imidazolium salts as preligands. In addition, NMR studies confirm in situ generation of normal N‐heterocyclic carbenes from the C‐2 position of imidazol‐2‐ylidene ring. The mercury poisoning test was also performed to ascertain the nature of catalytically active palladium species. Aerobic conditions, low catalytic loading (0.5 mol%), shorter reaction times, broad functional group tolerance and good to excellent isolated yields are some of the significant features of the novel catalytic systems described here. Copyright © 2016 John Wiley & Sons, Ltd.     

N‐Heterocyclic carbene/phosphite synergistically assisted Pd/C‐catalyzed Suzuki coupling of aryl chlorides

An N‐heterocyclic carbene and phosphite synergistically enhanced Pd/C catalyst system has been developed for Suzuki coupling of aryl chlorides and aryl boronic acids from commercially available Pd/C with sterically demanding N,N′‐bis(2,6‐diisopropylphenyl)imidazolylidene and trimethylphosphite. A remarkable increase in catalytic activity of Pd/C was observed when used along with 1 equiv. N,N′‐bis(2,6‐diisopropylphenyl)imidazolium chloride and 2 equiv. phosphite with respect to palladium in appropriate solvents that were found to play a crucial role in Pd/C‐NHC‐P(OR)₃‐catalyzed Suzuki coupling. A dramatic ortho‐substitution effect of carbonyl and nitrile groups in aryl chlorides was observed and explained by a modified quasi‐heterogeneous catalysis mechanism. The Pd/C catalyst could be easily recovered from reaction mixtures by simple filtration and only low palladium contamination was detected in the biparyl products. A practical process for the synthesis of 4‐biphenylcarbonitrile has therefore been developed using the N‐heterocyclic carbene/phosphite‐assisted Pd/C‐catalyzed Suzuki coupling. Copyright © 2013 John Wiley & Sons, Ltd.     

Palladium‐Catalyzed Direct C2 Arylation of N‐Substituted Indoles with 1‐Aryltriazenes

A novel and efficient palladium‐catalyzed C2 arylation of N‐substituted indoles with 1‐aryltriazenes for the synthesis of 2‐arylindoles was developed. In the presence of BF₃ ? OEt₂ and palladium(II) acetate (Pd(OAc)₂), N‐substituted indoles reacted with 1‐aryltriazenes in N,N‐dimethylacetamide (DMAC) to afford the corresponding aryl–indole‐type products in good to excellent yields.     

New palladium(II)–N‐heterocyclic carbene complexes containing benzimidazole‐2‐ylidene ligand derived from menthol: synthesis,characterization and catalytic activities

A new series of sterically hindered ligands containing (1R,2S,4R)‐(+)‐menthoxymethyl group attached to benzimidazole‐based N‐heterocyclic carbene (NHC), palladium–bis‐NHC complexes and (κ²‐C,N)‐palladacyclic NHC complexes have been synthesized and characterized using appropriate spectroscopic techniques. Catalytic performance of the palladium complexes has been investigated for allylic alkylation, Suzuki and Heck carbon–carbon coupling reactions. These complexes smoothly catalyse the carbon–carbon bond formation reactions. Copyright © 2016 John Wiley & Sons, Ltd.     

Palladium(II) N-heterocyclic carbene complexes: synthesis,structures and cytotoxicity potential studies against breast cancer cell line

Abstract

Mononuclear trans-Pd(II)–NHC complexes (where NHC?=?N-heterocyclic carbene) bearing asymmetrically substituted NHC-ligand have been synthesized via transmetalation reaction between Ag(I)–NHC complexes and [Pd(NCCH₃)₂Cl₂]. The NHC precursors are accessible in two steps by N-n-alkyl reactions of benzimidazole. The resultant benzimidazolium salts were deprotonated with Ag₂O by in situ deprotonation to facilitate the formation of mononuclear Ag(I)–NHC complexes. Single-crystal structural study for Pd(II)–NHC shows that the palladium(II) ion exhibits a square-planar geometry of two NHC ligands and two chloride ions. The cytotoxicity study was investigated against breast cancer cell line (MCF-7). The Ag(I)–NHC complexes exhibit better activities than their corresponding Pd(II)–NHC complexes, whereas all benzimidazolium salts are inactive toward MCF-7 cancer cell line.