Zinc(II) complexes of Triaza and Amidinate ligands: Efficient initiators for the ring‐opening polymerization of ε‐Caprolactone and rac‐Lactide

Zinc complexes supported by tertiary 1,3,5‐triazapenta‐1,3‐dienate ligand (L¹) and N ‐benzoyl‐N′ ‐arylbenzamidinate [aryl =2,6‐diisopropylphenyl (L²), phenyl (L³)] ligands have been synthesized and characterized. The reaction of L¹H with ZnEt₂ affords a mononuclear zinc complex [L¹ZnEt] ( 1 ) in good yield. Tetra nuclear zinc complex [(L¹)₂Zn₄O(OAc)₄] ( 2 ) is prepared by treating L¹H with one equivalent of Zn(OAc)₂ in toluene. Further, dinuclear zinc complexes [L²ZnEt]₂ ( 3 ) and [L³ZnEt]₂ ( 4 ) are obtained in good yields from L²H and L³H with ZnEt₂ in toluene respectively_. The complexes 1–4 have been characterized by ¹H/¹³C NMR spectroscopy and single crystal X‐ray diffraction studies. All of the complexes have been explored for their catalytic activity toward the ring‐opening polymerization (ROP) of ε ‐caprolactone. It has been found that complex 1 is an active catalyst for the polymerization of ε ‐caprolactone in presence of a cocatalyst benzyl alcohol (BnOH). While complex 2 is as active as 1 there is no need for a cocatalyst for the polymerization to proceed. Dinuclear zinc complexes 3 and 4 show very high activity for the ROP of ε ‐caprolactone (CL) and rac ‐lactide (LA) without requiring a cocatalyst. The resultant polymers are found to have very high molecular weight (M _n = 296 X 10³ g mol⁻¹) and relatively narrow polydispersity index compared to 1 and 2 .     

Efficient zinc initiators supported by NNO‐tridentate ketiminate ligands for cyclic esters polymerization

A series of zinc benzylalkoxide complexes, [LⁿZn(μ‐OBn)]₂ (L = L ¹ H – L ⁵ H ), supported by NNO‐tridentate ketiminate ligands with various electron withdrawing‐donating subsituents have been synthesized and characterized. X‐ray crystal structural studies revealed that complexes 2b and 4b are dinuclear bridging through the benzylalkoxy oxygen atoms with penta‐coordinated metal centers. All the metal complexes have acted as efficient initiators for the ring‐opening polymerization of L ‐lactide (within 12 min, 0 °C). Remarkably, a molecular weight of PLLA up to 580,000 can be achieved using [(L⁵Zn(μ‐OBn)]₂ ( 5b ) as an initiator. The kinetic studies for the polymerization of L ‐lactide with complex 3b at ?10 °C corresponded to first‐order reactions in the monomer. The ring‐opening polymerization (ROP) of ε‐caprolactone, ε‐decalactone, β‐butyrolactone and their copolymer with complex 3b was investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Aluminum salen and salan complexes in the ring‐opening polymerization of cyclic esters: Controlled immortal and copolymerization of rac‐β‐butyrolactone and rac‐lactide

Aluminum‐based salen and salan complexes mediate the ring‐opening polymerization (ROP) of rac‐β‐butyrolactone (β‐BL), rac‐lactide, and ε‐caprolactone. Al‐salen and Al‐salan complexes exhibit excellent control over the ROP of rac‐β‐butyrolactone, yielding atactic poly(3‐hydroxybutyrate) (PHB) with narrow PDIs of <1.15 for Al‐salen and <1.05 for Al‐salan. Kinetic studies reveal pseudo‐first‐order polymerization kinetics and a linear relationship between molecular weight and percent conversion. These complexes also mediate the immortal ROP of rac‐β‐BL and rac‐lactide, through the addition of excess benzyl alcohol of up to 50 mol eq., with excellent control observed. A novel methyl/adamantyl‐substituted Al‐salen system further improves control over the ROP of rac‐lactide and rac‐β‐BL, yielding atactic PHB and highly isotactic poly(lactic acid) (P_m = 0.88). Control over the copolymerization of rac‐lactide and rac‐β‐BL was also achieved, yielding poly(lactic acid)‐co‐poly(3‐hydroxybutyrate) with narrow PDIs of <1.10. ¹H NMR spectra of the copolymers indicate a strong bias for the insertion of rac‐lactide over rac‐β‐BL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Titanium complexes of dialkanolamine ligands as initiators for living ring‐opening polymerization of ε‐caprolactone

The titanium complexes with one ( 1a , 1b , 1c ) and two ( 2a , 2b ) dialkanolamine ligands were used as initiators in the ring‐opening polymerization (ROP) of ε‐caprolactone. Titanocanes 1a and 1b initiated living ROP of ε‐caprolactone affording polymers whose number‐average molecular weights (M_n) increased in direct proportion to monomer conversion (M_n ≤ 30,000 g mol^?1) in agreement with calculated values, and were inversely proportional to initiator concentration, while the molecular weight distribution stayed narrow throughout the polymerization (M_w/M_n ≤ 1.2 up to 80% monomer conversion). ¹H‐NMR and MALDI‐TOF‐MS studies of the obtained poly(ε‐caprolactone)s revealed the presence of an isopropoxy group originated from the initiator at the polymer termini, indicating that the polymerization takes place exclusively at the Ti–OⁱPr bond of the catalyst. The higher molecular weight polymers (M_n ≤ 70,000 g mol^?1) with reasonable MWD (M_w/M_n ≤ 1.6) were synthesized by living ROP of ε‐caprolactone using spirobititanocanes ( 2a , 2b ) and titanocane 1c as initiators. The latter catalysts, according MALDI‐TOF‐MS data, afford poly(ε‐caprolactone)s with almost equal content of α,ω‐dihydroxyl‐ and α‐hydroxyl‐ω(carboxylic acid)‐terminated chains arising due to monomer insertion into “Ti–O” bond of dialkanolamine ligand and from initiation via traces of water, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1230–1240, 2010     

Tridentate anilido‐aldimine magnesium and zinc complexes as efficient catalysts for ring‐opening polymerization of ε‐caprolactone and L‐lactide

A novel tridentate anilido‐aldimine ligand, [o‐C₆H₄(NHAr)? HC?NCH₂CH₂NMe₂] (Ar = 2,6‐ⁱPr₂C₆H₃, L ‐H, 1 ), has been prepared by the condensation of N, N‐dimethylethylenediamine with one molar equivalent of 2‐fluoro‐benzaldehyde in hexane, followed by the addition of the lithium salt of diisopropylaniline in THF. Magnesium (Mg) and zinc (Zn) complexes supported by the tridentate anilido‐aldimine ligand have been synthesized and structurally characterized. Reaction of L ‐H ( 1 ) with an equivalent amount of MgⁿBu₂ or ZnEt₂ produces the monomeric complex [ L MgⁿBu] ( 2 ) or [ L ZnEt] ( 3 ), respectively. Experimental results show that complexes 2 and 3 are efficient catalysts for ring‐opening polymerization of ε‐caprolactone (CL) and L ‐lactide (LA) in the presence of benzyl alcohol and catalyze the polymerization of ε‐CL and L ‐LA in a controlled fashion yielding polymers with a narrow polydispersity index. In both polymerizations, the activity of Mg complex 2 is higher than that of Zn complex 3 , which is probably due to the higher Lewis acidity and better oxophilic nature of Mg²⁺ metal. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4927–4936, 2009     

Monoaryloxo ytterbium(III) chlorides supported by β‐diketiminato ligands as novel initiators for the living ring‐opening polymerization of ε‐caprolactone

Ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out using β‐diketiminato‐supported monoaryloxo ytterbium chlorides L¹Yb(OAr)Cl(THF) (1) [L¹ = N,N′‐bis(2,6‐dimethylphenyl)‐2,4‐pentanediiminato, OAr = 2,6‐di‐tert‐butylphenoxo‐], and L²Yb(OAr′)Cl(THF) (2) [L² = N,N′‐bis(2,6‐diisopropylphenyl)‐2,4‐pentanediiminato, OAr′ = 2,6‐di‐tert‐butyl‐4‐methylphenoxo‐], respectively, as single‐component initiator. The influence of reaction conditions, such as polymerization temperature, polymerization time, initiator, and initiator concentration, on the monomer conversion, molecular weight, and molecular weight distribution of the resulting polymers was investigated. Complex 1 was well characterized and its crystal structure was determined. Some features and kinetic behaviors of the CL polymerization initiated by these two complexes were studied. The polymerization rate is first order with respect to monomer. The M_n of the polymer increases linearly with the increase of the polymer yield, while polydispersity remained narrow and unchanged throughout the polymerization in a broad range of temperatures from 0 to 50 °C. The results indicated that the present system has a “living character”. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1147–1152, 2006     

Structurally rigid bis(pyrazolyl)pyridine Zn(II) and Cu(II) complexes: Structures and kinetic studies in ring‐opening polymerization of ε‐caprolactone

Four bis(pyrazolyl)pyridine Zn(II) and Cu(II) carboxylate complexes have been structurally elucidated and used as initiators in the ring‐opening polymerization (ROP) of ε‐carprolactone (ε‐CL). Reactions of bis(3,5‐dimethyl‐pyrazol‐1‐yl)pyridine ( L1 ) with the appropriate Zn(II) and Cu(II) carboxylates afforded the corresponding complexes; [Zn(L1)(C₆H₅COO)₂] ( 1 ), [Zn(L1)(2‐Cl‐C₆H₄COO)₂] ( 2 ), [Zn(L1)(OAc)₂] ( 3 ) and [Cu(L1)(OAc)₂] ( 4 ) in moderate to good yields. Molecular structures of compounds 1 , 2 , 3 confirmed the presence of one tridentate bound ligand L1 in the metal coordination sphere and two carboxylate anions to give five coordination number around Zn(II) and Cu(II) atoms. Complexes 1 , 2 , 3 , 4 initiated the ROP of ε‐CL at 110 °C to give polymers of moderate molecular weights. Kinetic analyses of the ROP reactions indicate pseudo ‐first‐order dependency on ε‐CL monomer and initiator. ¹H NMR and mass spectral data established a coordination insertion mechanistic pathway and behaviour of 1 , 2 , 3 , 4 as initiators in the ROP of ε‐CL. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and characterization of aluminum complexes based on amino‐benzotriazole phenoxide ligand: luminescent properties and catalysis for ring‐opening polymerization

Aluminum complexes coordinated by a ^C1DEABTP ligand (^C1DEABTP‐H = 2‐(2H‐benzotriazol‐2‐yl)‐6‐((diethylamino)methyl)‐4‐methylphenol) were synthesized and structurally characterized. The formation of Al complexes is dependent on the stoichiometry of AlMe₃ to ^C1DEABTP ligand ratio. The reaction of ^C1DEABTP‐H with AlMe₃ (1.0 molar equiv.) in hexane produced mono‐adduct aluminum complex [(^C1DEABTP)AlMe₂] (1), but treatment of ^C1DEABTP‐H with 2.0 molar equiv. of AlMe₃ afforded mixtures of [(^C1DEABTP)Al₂Me₅] (2) and [(^C1DEABTP)Al₃Me₈] (3). The penta‐coordinated bis‐adduct aluminum complex [(^C1DEABTP)₂AlMe] (4) was synthesized through the reaction of AlMe₃ with ^C1DEABTP‐H (2.0 molar equiv.) in hexane. Tri‐adduct Al complex [(^C1DEABTP)₃Al] (5) resulted from treatment of AlMe₃ with ^C1DEABTP‐H (3.0 equiv.); the Al center is hexa‐coordinated with three N,O‐bidentate ^C1DEABTP ligands. X‐ray diffraction of single crystals indicates that the bonding modes of the ^C1DEABTP ligands in complexes 2–3 are greatly affected when excess AlMe₃ is coordinated. The optical properties and catalysis for lactone polymerizations of ^C1DEABTP coordinated to Al complexes were tested. Tri‐adduct Al complex 5 produced an intense green fluorescence in both solution and the solid state. Complex 4 is an active catalyst for the ring‐opening polymerization of ε‐caprolactone (ε‐CL) and L‐lactide (L‐LA) in the presence of 9‐anthracenemethanol (9‐AnOH). In ε‐CL polymerization, Al complex 4 catalyzes efficiently in both a 'controlled' and 'immortal' manner, giving polymers with the expected molecular weights and narrow polydispersity indexes. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and characterization of aluminum(III) and tin(II) complexes supported by diiminophosphinate ligands and their application in ring‐opening polymerization catalysis of ε‐caprolactone

A series of Al(III) and Sn(II) diiminophosphinate complexes have been synthesized. Reaction of Ph(ArCH₂)P(?NBu^t)NHBu^t (Ar = Ph, 3 ; Ar = 8‐quinolyl, 4 ) with AlR₃ (R = Me, Et) gave aluminum complexes [R₂Al{(NBu^t)₂P(Ph)(CH₂Ar)}] (R = Me, Ar = Ph, 5 ; R = Me, Ar = 8‐quinolyl, 6 ; R = Et, Ar = Ph, 7 ; R = Et, Ar = quinolyl, 8 ). Lithiated 3 and 4 were treated with SnCl₂ to afford tin(II) complexes [ClSn{(NBu^t)₂P(Ph)(CH₂Ar)}] (Ar = Ph, 9 ; Ar = 8‐quinolyl, 10 ). Complex 9 was converted to [(Me₃Si)₂NSn{(NBu^t)₂P(Ph)(CH₂Ph)}] ( 11 ) by treatment with LiN(SiMe₃)₂. Complex 11 was also obtained by reaction of 3 with [Sn{N(SiMe₃)₂}₂]. Complex 9 reacted with [LiOC₆H₄Bu^t‐4] to yield [4‐Bu^tC₆H₄OSn{(NBu^t)₂P(Ph)(CH₂Ph)}] ( 12 ). Compounds 3–12 were characterized by NMR spectroscopy and elemental analysis. The structures of complexes 6 , 10 , and 11 were further characterized by single crystal X‐ray diffraction techniques. The catalytic activity of complexes 5–8 , 11 , and 12 toward the ring‐opening polymerization of ε‐caprolactone (CL) was studied. In the presence of BzOH, the complexes catalyzed the ring‐opening polymerization of ε‐CL in the activity order of 5 > 7 ≈ 8 > 6 ? 11 > 12 , giving polymers with narrow molecular weight distributions. The kinetic studies showed a first‐order dependency on the monomer concentration in each case. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4621–4631, 2006     

Cyclic poly(ε‐caprolactone) synthesized by combination of ring‐opening polymerization with ring‐closing metathesis,ring closing enyne metathesis,or “click” reaction

This article described the synthesis of cyclic poly(ε‐caprolactone) (PCL) via ring‐closing metathesis (RCM), ring closing enyne metathesis (RCEM), and “click” reaction of different difunctional linear PCL. Linear PCL precursors were prepared by ring‐opening polymerization (ROP) of ε‐caprolactone in bulk using 10‐undecen‐1‐ol or propargyl alcohol as the initiator, followed by reacting with corresponding acyl chloride containing vinyl or azido end group. The subsequent end‐to‐end intramolecular coupling reactions were performed under high dilution conditions. The successful transformation of linear PCL precursor to cyclic PCL was confirmed by Gel permeation chromatography, ¹H NMR, and Fourier transform infrared measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3022–3033, 2009     

Poly(ε‐caprolactone) by combined ring‐opening polymerization and azeotropic polycondensation—the role of cyclization and equilibration

Using three different catalysts, water‐initiated polymerizations of ε‐caprolactone were conducted in bulk with variation of the monomer/water ratio. The resulting CH₂OH and CO₂H‐ terminated polylactones were subjected in situ to azeotropic polycondensations. With Bi‐triflate and temperatures, the polycondensations were not much successful and involved side reactions. With ZnCl₂, and especially SnCl₂, considerably higher molar masses were achieved. The substitution of toluene for chlorobenzene for refluxing gave better results. The polycondensations broadened the molar mass distribution of the ROP‐based prepolymers, and polydispersities between 1.4–1.8 were obtained. The MALDI–TOF mass spectra revealed that the polycondensations significantly enhanced the fraction of rings due to efficient “end‐biting” reactions. By comparison with copolymerization experiments and Sn methoxide‐initiated polymerizations, it was demonstrated that equilibration reactions, such as the formation of rings by “back‐biting,” did not occur. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Simultaneous reversible addition fragmentation chain transfer and ring‐opening polymerization

The simultaneous ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL) and 2‐hydroxyethyl methacrylate (HEMA) polymerization via reversible addition fragmentation chain transfer (RAFT) chemistry and the possible access to graft copolymers with degradable and nondegradable segments is investigated. HEMA and ε‐CL are reacted in the presence of cyanoisopropyl dithiobenzoate (CPDB) and tin(II) 2‐ethylhexanoate (Sn(Oct)₂) under typical ROP conditions (T > 100 °C) using toluene as the solvent in order to lead to the graft copolymer PHEMA‐g‐PCL. Graft copolymer formation is evidenced by a combination of size‐exclusion chromatography (SEC) and NMR analyses as well as confirmed by the hydrolysis of the PCL segments of the copolymer. With targeted copolymers containing at least 10% weight of PHEMA and relatively small PHEMA backbones (ca. 5,000–10,000 g mol^?1) the copolymer grafting density is higher than 90%. The ratio of free HEMA‐PCL homopolymer produced during the “one‐step” process was found to depend on the HEMA concentration, as well as the half‐life time of the radical initiator used. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3058–3067, 2008     

Semiempirical INDO/S calculations on the absorption spectrum of mono‐ and trinuclear vanadium(II) complexes

This work is concerned with prospective starting materials for the synthesis of larger molecules used as functional models of the substrate binding and reducing site of the vanadium nitrogenase. It is well known that the mononuclear adduct of vanadium(II) chloride with N,N,N′,N′‐tetramethylethylenediamine, henceforth referred to as [VCl₂(tmeda)₂], is a good starting material for the synthesis of trinuclear vanadium complexes. We now report the results of semiempirical calculations on the spectroscopy of [VCl₂(tmeda)₂] using the intermediate neglect of differential overlap (INDO) method. For the mononuclear complex, the ground state was calculated to be a quartet, about 45 kcal/mol below the doublet. For the positively charged trinuclear vanadium complex, [V₃(μ‐Cl)₃(μ₃‐Cl)₂(tmeda)₃]⁺, the ground state was calculated to be a decatet, about 47 kcal/mol below the octet. For both complexes the frontier orbitals are dominated by the vanadium 3d manifold, and accordingly the electronic spectra are dominated by d‐d* excitations within this manifold. The INDO/S‐calculated spectra are in good agreement with the observed UV‐visible spectra in both cases. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem 88: 245–251, 2002     

Anionic lanthanide phenoxide complexes as novel single‐component initiators for the polymerization of ε‐caprolactone and trimethylene carbonate

The anionic lanthanide‐sodium‐2,6‐di‐tert‐butyl‐phenoxide complexes [Ln(OAr)₄][Na(DME)₃]·DME (Ln = Nd 1 (neodymium), Sm 2 (samarium), or Gd 3 (gadolium); DME = dimethoxyethane) were synthesized by the reaction of anhydrous LnCl₃ with 4 equiv of sodium‐2,6‐di‐tert‐butyl‐phenoxide NaOAr in high yields and structurally characterized. These complexes showed high catalytic activity in the ring‐opening polymerizations of ?‐caprolactone (?‐CL) and trimethylene carbonate (TMC). The catalytic activity profoundly depended on the lanthanide metals. The active order of Gd < Sm < Nd for the polymerization of ?‐CL and TMC was observed. The polymers obtained with these initiators all showed a unimodal molecular weight distribution, indicating that the [Ln(OAr)₄][Na(DME)₃]·DME anionic complexes could be used as single‐component initiators. The anionic complex was more efficient than the corresponding neutral complex, Ln(OAr)₃(THF)₂. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1210–1218, 2007     

Anionic iron(II) alkoxides as initiators for the controlled ring‐opening polymerization of lactide

Hetero‐bimetallic Fe(II) alkoxide/aryloxides were evaluated as initiators for the ring‐opening polymerization of rac‐lactide. [(THF)NaFe(O^tBu)₃]₂ ( 1 ) and [(THF)₄Na₂Fe(2,6‐diisopropylphenolate)₄] ( 2 ) (THF = tetrahydrofuran) both polymerized lactide efficiently at room temperature, with complex 1 affording better control over the molecular weight parameters of the resultant polymer. At conversions below 70%, a linear increase in molecular weight with conversion was observed, indicative of a well‐controlled polymerization process. Complex 2 is the first example of a dianionic Fe(II) alkoxide and has been structurally characterized to reveal a distorted square planar FeO₄ array in which both Na counterions bridge two aryloxide ligands and are further complexed by two THF ligands. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3798–3803, 2003     

Ring‐opening polymerization of ε‐caprolactone and L‐lactide from silica nanoparticles surface

Coating of silica nanoparticles by biocompatible and biodegradable polymers of ε‐caprolactone and L ‐lactide was performed in situ by ring‐opening polymerization of the cyclic monomers with aluminum, yttrium, and tin alkoxides as catalysts. Hydroxyl groups were introduced on the silica surface by grafting of a prehydrolyzed 3‐glycidoxypropyl trimethoxysilane to initiate a catalytic polymerization in the presence of metal alkoxides. In this manner, free polymer chains were formed to grafted ones, and the graft density was controlled by the nature of the metal and the alcohol‐to‐metal ratio. The grafting reaction was extensively characterized by spectroscopic techniques and quantified. Nanocomposites containing up to 96% of polymer were obtained by this technique. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1976–1984, 2004     

Ring‐opening polymerization of lactide, ε‐caprolactone and their copolymerization catalyzed by β‐diketiminate zinc complexes

A series of zinc silylamido complexes bearing non‐symmetric β ‐diketiminate ligands were synthesized and structurally characterized. Ring‐opening polymerization (ROP) of rac ‐lactide catalyzed by these zinc complexes afforded heterotactic polylactides at room temperature (P _r = 0.79 ~ 0.83 in THF). The steric and electronic characteristics of the ancillary ligands showed significant influence on the polymerization performance of the corresponding zinc complexes. All these zinc complexes also showed moderate activities toward the polymerization of ε ‐caprolactone at ambient temperature in toluene, producing polycaprolactones (PCLs) with high molecular weights and moderate polydispersities. PCL‐b ‐PLLA copolymers could be obtained via three different copolymerization strategies (one‐pot polymerization, and sequential addition of the two monomers in either order) by adopting complex 6 as the initiator through the adjustment of reaction temperatures. The diblock nature of the copolymers was confirmed by ¹³C NMR spectroscopy and DSC analysis.     

Synthesis,characterization, and catalytic activity of titanium iminophenoxide complexes in relation to the ring‐opening polymerization of L‐lactide and ε‐caprolactone

This study synthesized a series of titanium iminophenoxide complexes and investigated their suitability as catalysts for the ring‐opening polymerization of L ‐lactide (L ‐LA) and ε‐caprolactone (CL). Complexes with bidentate ligands demonstrate higher catalytic activity than their tridentate counterparts since the third coordination atom needs to contend with L ‐LA and CL. Differences in the geometric framework of bidentate ligands also influence the catalytic activity. Type II ligands (N, N‐trans form of Ti complex) prevent the coordination of monomers to Ti thereby decreasing the initiation rate. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Magnesium complexes incorporated by sulfonate phenoxide ligands as efficient catalysts for ring‐opening polymerization of ε‐caprolactone and trimethylene carbonate

Two novel sulfonate phenol ligands—3,3′‐di‐tert‐butyl‐2′‐hydroxy‐5,5′,6,6′‐tetramethyl‐biphenyl‐2‐yl 4‐X‐benzenesulfonate (X?CF₃, L^CF3 ‐H, and X?OCH₃, L^OMe ‐H)—were prepared through the sulfonylation of 3,3′‐di‐tert‐butyl‐5,5′,6,6′‐tetramethylbiphenyl‐2,2′‐diol with the corresponding 4‐substituted benzenesulfonyl chloride (1 equiv.) in the presence of excess triethylamine. Magnesium (Mg) complexes supported by sulfonate phenoxide ligands were synthesized and characterized structurally. The reaction of MgⁿBu₂ with L‐H (2 equiv.) produces the four‐coordinated monomeric complexes ( L^CF3 )₂Mg ( 1 ) and ( L^OMe )₂Mg ( 2 ). Complexes 1 and 2 are efficient catalysts for the ring‐opening polymerization of ε‐caprolactone (ε‐CL) and trimethylene carbonate (TMC) in the presence of 9‐anthracenemethanol; complex 1 catalyzes the polymerization of ε‐CL and TMC in a controlled manner, yielding polymers with the expected molecular weights and narrow polydispersity indices (PDIs). In ε‐CL polymerization, the activity of complex 1 is greater than that of complex 2 , likely because of the greater Lewis acidity of Mg²⁺ metal caused by the electron‐withdrawing substitute trifluoromethyl (? CF₃) at the 4‐position of the benzenesulfonate group. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3564–3572, 2010     

Synthesis and characterization of amphiphilic poly(N‐vinyl pyrrolidone)‐b‐poly(ε‐caprolactone) copolymers by a combination of cobalt‐mediated radical polymerization and ring‐opening polymerization

An amphiphilic block copolymer of poly(N‐vinyl pyrrolidone)‐b‐poly(ε‐caprolactone) (PVP‐b‐PCL) was synthesized by a combination of cobalt‐mediated radical polymerization (CMRP) and ring‐opening polymerization (ROP). The micellar characteristics of this copolymer were subsequently investigated. PVP (M_n = 11,400, M_w/M_n = 1.32) was synthesized at 20 °C via CMRP using a molar ratio of [VP]₀/[V‐70]₀/[Co]₀ = 150/8/1. The PVP was then reacted with 2,2′‐azobis[2‐methyl‐N‐(2‐hydroxyethyl)propionamide] (VA‐086) to modify its cobalt complex chain end to a hydroxyl group. The cobalt (Co) content in the resulting PVP‐OH was 1.2 ppm, indicating that all of the covalent Co? C bonds were cleaved and reacted with VA‐086, and that the separated cobalt complexes were successfully removed. The ROP of CL was subsequently carried out using the produced PVP‐OH as a macroinitiator at 110 °C. The GPC trace of PVP‐b‐PCL was monomodal without any tailing caused by the residual PVP‐OH, indicating that the initiation efficiency was very high. The critical micelle concentration (CMC) of PVP‐b‐PCL (M_n = 18,000, M_w/M_n = 1.35) was 0.015 mg/mL. The PVP‐b‐PCL micelles were spherical in shape with an average diameter of 105 nm. The nanosized PVP‐b‐PCL micelles show promise as novel drug carriers in biomedical and pharmaceutical applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3078–3085, 2009