An Amperometric Immunosensor for IgG Based on Conducting Polymer and Carbon Nanotube‐Linked Hydrazine Label

An amperometric immunosensor for IgG was developed by covalently immobilizing anti‐IgG on multiwall carbon nanotube‐embedded conducting polymer, poly‐5,2′ : 5′′,2′′‐terthiophene‐3′‐carboxylic acid (MWCNT/pTTCA). The MWCNT/pTTCA modified electrode was characterized by SEM, EIS, and XPS. A hydrazine‐labeled secondary antibody‐MWCNT conjugate (Hyd‐MWCNT‐Ab₂) was applied for detection. Hydrazine was used as a catalyst for the reduction of hydrogen peroxide, which was monitored at ?0.3 V vs. Ag/AgCl. The calibration plots showed a linear range of 0.1–10 ng/mL with a detection limit of 0.084±0.004 ng/mL. The proposed immunosensor was evaluated for clinical applications in a rabbit serum sample.     

碳纳米管载Pd-Au催化剂的合成及其对甲酸氧化的电催化性能

将萘-1-亚甲基膦酸通过π-π堆积作用修饰在多壁碳纳米管(MWCNT)上,然后制备了MWCNT载Pd(Pd/MWCNT)催化剂。 利用Pd和HAuCl4间的置换反应制得MWCNT载Pd-Au(Pd-Au/MWCNT)催化剂。 透射电子显微镜(TEM)、X射线光电子能谱(XPS)和X射线衍射光谱(XRD)测试结果显示,非合金化的Pd-Au纳米粒子均匀分布在MWCNT表面。 循环伏安和计时电流测试显示,非合金化Pd-Au/MWCNT催化剂对甲酸氧化的电催化活性以及稳定性优于Pd/MWCNT催化剂。     

An Efficient Nanoparticle‐Supported and Magnetically Recoverable Copper(I) Catalyst for Synthesis of Furans from Ene‐yne‐ketone

A magnetic nano‐supported Cu(I) catalyst was prepared and showed high activity for cyclization of ene‐yne‐ketone to synthesize furans. The catalyst was easily recovered from the reaction by using external magnets and reused 8 times without significant loss of its catalytic activity.     

Fe3O4 nanoparticle‐supported copper(I): magnetically recoverable and reusable catalyst for the synthesis of quinazolinones and bicyclic pyrimidinones

A highly efficient, easily recoverable and reusable Fe₃O₄ magnetic nanoparticle‐supported Cu(I) catalyst has been developed for the synthesis of quinazolinones and bicyclic pyrimidinones. In the presence of supported Cu(I) catalyst (10 mol%), amidines reacted with substituted 2‐halobenzoic acids and 2‐bromocycloalk‐1‐enecarboxylic acids to generate the corresponding N‐heterocycle products in good to excellent yields at room temperature in DMF. In addition, the supported Cu(I) catalyst could be recovered at least 10 times without significant loss of its catalytic activity. Copyright © 2012 John Wiley & Sons, Ltd.     

Copper(I) and palladium nanoparticles supported on ethylenediamine‐functionalized cellulose as an efficient catalyst for the 1,3‐dipolar cycloaddition/direct arylation sequence

Cu(I) and nanoparticles of Pd supported on ethylenediamine‐functionalized cellulose as a novel bio‐supported catalyst was synthesized and characterized. The synthesized catalyst was found to be a highly efficient heterogeneous catalyst for the synthesis of 1,4,5‐trisubstituted 1,2,3‐triazoles through a sustainable 1,3‐dipolar cycloaddition/direct arylation sequence. The catalyst could be easily recovered by simple filtration and reused for at least five cycles without losing its activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Selective Hydrogenation of Citral over a Carbon‐titania Composite Supported Palladium Catalyst

A novel carbon‐titania composite material, C/TiO₂, has been prepared by growing carbon nanofibers (CNFs) on TiO₂ surface via methane decomposition using Ni‐Cu as a catalyst. The C/TiO₂ was used for preparing supported palladium catalyst, Pd/C/TiO₂. The support and Pd/C/TiO₂ catalyst were characterized by BET, SEM, XRD and TG‐DTG. Its catalytic performance was evaluated in selective hydrogenation of citral to citronellal, and compared with that of activated carbon supported Pd catalyst. It was found that the Pd/C/TiO₂ catalyst contains 97% of mesopores. And it exhibited 88% of selectivity to citronellal at citral conversion of 90% in citral hydrogenation, which was much higher than that of activated carbon supported Pd catalyst. This result may be attributed to elimination of internal diffusion limitations, which were significant in activated carbon supported Pd catalyst, due to its microporous structure.     

Interactions of carbon nanotubes with pyrene‐functionalized linear‐dendritic hybrid polymers

A series of linear‐dendritic hybrid polymers, containing pyrene units at the periphery of aliphatic polyester dendrons, were prepared for the purpose of dispersing shortened single‐walled carbon nanotubes (SWNTs) in tetrahydrofuran (THF). The prepared hybrids contained 1, 2, 4, 8, or 16 (G0 through G4) pyrene units and a linear segment composed of polystyrene. It was found that a minimum of four pyrene units was necessary to form a strong enough interaction with SWNTs to enable steric stabilization in solution, when using a linear polymer segment of 11.5 kDa. Increasing either the number of pyrene units per polymer chain or the length of the polymer segment to 18.0 kDa did not improve nanotube solubility, whereas decreasing the polymer length resulted in significantly less effective nanotube dissolution. The G4 dendron alone, without the linear polystyrene segment, was also found to impart solubility to the nanotubes in THF. Interactions between the series of linear‐dendritic hybrids and full‐length multiwalled carbon nanotubes were also investigated, and it was found that the polymers exhibited strong interactions with the multiwalled carbon nanotube surface, resulting in the formation of stable solutions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1016–1028, 2010     

Carbon Nanotubes: An Example of Multiscale Development—A Mechanistic View from the Subnanometer to the Meter Scale

We summarize the catalytic synthesis of multiwall carbon nanotubes (MWCNTs). The current understanding of the reaction mechanism is presented, in particular the catalyst design for the CCVD process is analyzed. To complement that, kinetics and reaction engineering aspects are discussed along with the impact of the reaction and reactor operation on the product properties. All these issues are analyzed from the perspective of the industrial synthesis and implications for the application of carbon nanotubes. Carbon‐nanotube technology is a perfect example of multi‐scale development and covers challenges from the nanometer to the meter scale. Problems, methods, and solutions characteristic for different scales will be highlighted. The Co/Mn catalyst is used as reference as one of the first commercially used technologies for the scalable production of multiwall carbon nanotubes.     

Cobalt nanoparticles supported on ionic liquid‐functionalized multiwall carbon nanotubes as an efficient and recyclable catalyst for Heck reaction

A novel and environmentally friendly cobalt nanoparticle catalyst supported on ionic liquid‐functionalized multiwall carbon nanotubes was successfully prepared and evaluated as a heterogeneous catalyst for the Mizoroki–Heck reaction. Several reaction parameters, including type and amount of solvent and base, were evaluated. This nanocatalyst could also be recovered and reused at least six times without any discernible decrease in its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Light‐driven atom transfer radical polymerization on supramolecular complexes of conjugated polymers and single‐walled carbon nanotubes

Previous approaches used to decorate latently reactive conjugated polymer‐coated carbon nanotube complexes have utilized “grafting‐to” strategies. Here, we coat the carbon nanotube surface with a conjugated polymer whose side chains contain the radical initiator, α‐bromoisobutyrate, which enables atom transfer radical polymerization (ATRP) from the polymer–nanotube surface. Using light to generate Cu(I) in situ, ATRP is used to grow narrow dispersity polymer chains from the polymer–nanotube surface. We confirm the successful polymerization of (meth)acrylates from the polymer–nanotube surface using a combination of gel permeation chromatography and infrared spectroscopy. Strikingly, we demonstrate that nanotube optoelectronic properties are preserved after radical‐mediated polymer grafting using Raman spectroscopy and photoluminescence mapping. Overall, this work elucidates a method to grow narrow dispersity polymer chains from the polymer–nanotube surface using light‐driven radical chemistry, with concurrent preservation of nanotube optoelectronic properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2015–2020     

A Poly(cobaloxime)/Carbon Nanotube Electrode: Freestanding Buckypaper with Polymer‐Enhanced H2‐Evolution Performance

A freestanding H₂‐evolution electrode consisting of a copolymer‐embedded cobaloxime integrated into a multiwall carbon nanotube matrix by π–π interactions is reported. This electrode is straightforward to assemble and displays high activity towards hydrogen evolution in near‐neutral pH solution under inert and aerobic conditions, with a cobalt‐based turnover number (TON_Co) of up to 420. An analogous electrode with a monomeric cobaloxime showed less activity with a TON_Co of only 80. These results suggest that, in addition to the high surface area of the porous network of the buckypaper, the polymeric scaffold provides a stabilizing environment to the catalyst, leading to further enhancement in catalytic performance. We have therefore established that the use of a multifunctional copolymeric architecture is a viable strategy to enhance the performance of molecular electrocatalysts.     

A Double‐Passivation Water‐Based Galvanic Displacement Method for Reproducible Gram‐Scale Production of High‐Performance Platinum‐Alloy Electrocatalysts

Preparation of large quantities of high‐performance supported Pt‐alloy electrocatalysts is crucial for the faster development and implementation of low‐temperature proton exchange membrane fuel cells (PEMFCs). One of the prospective nanofabrication synthesis methods is based on the galvanic displacement (GD) reaction. A facile, highly reproducible, gram scale, water‐based double passivation GD method is now presented for the synthesis of carbon‐supported Pt‐M nanoparticles (M=Cu, Ni, Co). It offers great flexibility over the catalyst design, such as the choice of the sacrificial metal (M), variation of the chemical composition of alloy, variation of total metal loading (Pt+M) on carbon support, or even variation of the carbon support itself. The obtained Pt‐alloy catalysts are several times more active compared to a Pt reference and exhibits better stability during accelerated degradation tests performed at 60 °C.     

Sensing System Integrating Lanthanum Hydroxide Nanowires with Copper(II) Ion for Uracil and its Application

Abstract

A sensing system for uracil was constituted by using lanthanum hydroxide nanowires (LNW) as a modifier to obtain LNW modified carbon paste electrode (LNW/CPE) and by introducing copper(II) ion into supporting electrolyte to transform electroinactive uracil to electroactive uracil‐Cu(II) complex. The voltammetric behaviors of uracil in the presence of Cu(II) ion at LNW/CPE were investigated. A reduction peak of the uracil‐Cu(II) complex at ?0.18 V was the two‐electron reduction of Cu(II) ion in the uracil‐Cu(II) complex; while a new oxidation peak at 0.22 V was the one‐electron oxidation of the uracil‐Cu(I) complex. Additionally, the voltammetric responses of all the complexes at LNW/CPE were more sensitive than that at carbon and multiwall carbon nanotube paste electrodes, which resulted from both the large surface effect of LNW and the chemical coordination of uracil with La(III) ion in LNW. With the sensitive oxidation peak of the uracil‐Cu(I) complex at LNW/CPE, a linear range of 4.0×10^?9?3.0×10^?8 mol/l for uracil was obtained along with a detection limit of 2.0×10^?10 mol/l. The proposed system was evaluated by the determination of uracil derivatives, anticancer drug 5‐flurouracil, in pharmaceutical preparations.     

Copper nanoparticles supported on polyaniline‐functionalized multiwall carbon nanotubes: An efficient and recyclable catalyst for synthesis of unsymmetric sulfides using potassium ethyl xanthogenate in water

A new and powerful polyaniline‐functionalized carbon nanotube‐supported copper(II) nanoparticle catalyst was successfully prepared and evaluated as a heterogeneous catalyst for the one‐pot synthesis of unsymmetric thioethers by coupling of aryl, alkyl and benzyl halides using potassium ethyl xanthogenate as source of sulfur in water. All of these reactions gave the desired products in good to excellent yields. The catalyst is available, air‐stable and can be reused several times without significant loss in its catalytic activity.     

Synergistic effect of double percolated co‐supportive MWCNT‐CB conductive network for high‐performance EMI shielding application

The recent development in telecommunication technology has led electromagnetic interference (EMI) to a serious threat to both electronic devices and living beings. In this work, we designed a highly efficient EMI shielding material by taking advantage of both carbonaceous hybrid filler and double percolation phenomenon. Here, a flexible, lightweight microwave absorbing conductive polymer composite was fabricated by employing poly (ethylene‐co‐methyl acrylate) and ethylene octene copolymer (EMA/EOC) binary blend as the matrix and multiwall carbon nanotube carbon black (MWCNT/CB) hybrid filler as the conductive moiety. We investigated the effect of MWCNT content in the hybrid composite on mechanical, thermomechanical, electrical, and shielding efficiency. A total EMI shielding efficiency of ?37.4 dB in the X band region was attained with 20 wt% hybrid filler containing 50 wt% MWCNT along with promising mechanical properties.     

Copper immobilized on magnetite nanoparticles coated with ascorbic acid: An efficient and reusable catalyst for C─N and C─O cross‐coupling reactions

In a continuation of using magnetic nanoparticle (MNP)‐supported catalysts, ascorbic acid (readily available, very safe and with strong affinity to MNPs) was used instead of the commonly used silica layer coating. This hybrid was used for immobilizing copper nanoparticles to produce Cu/ascorbic acid@MNPs catalyst. The catalyst was characterized and used in carbon–oxygen and carbon–nitrogen (various substrates) cross‐coupling reactions in aqueous media and at room temperature with excellent product yields. Furthermore, the catalyst could be quickly and completely recovered using an external magnetic field and reused for six reaction cycles without significant change in catalytic activity.     

A reusable polymer‐supported copper(I) catalyst for triazole click reaction on water: An experimental and computational study

In the search for establishing a clickable copper‐catalysed (3 + 2) Huisgen azide–alkyne cycloaddition (CuAAC) reaction under strict conditions, in particular in terms of preventing the presence of copper particles/traces in reaction products and using an environmentally benign medium such as water, we describe here the synthesis of an aminomethyl polystyrene‐supported copper(I) catalyst (Cu(I)‐AMPS) and its characterization by means of Fourier transform infrared and energy‐dispersive X‐ray spectroscopies and scanning electron microscopy. Cu(I)‐AMPS was found to be highly active in the CuAAC reaction of various organic azides with alkynes affording the corresponding 1,4‐disubstituted 1,2,3‐triazoles in a regioselective manner in air at room temperature and using water as solvent. The insolubility and/or partial solubility of the organic azide and alkyne precursors as well as the heterogeneous Cu(I)‐AMPS catalytic system points to the occurrence of the cycloaddition at the organic–water interface ‘on water’ affording quantitative yields of water‐insoluble 1,2,3‐triazoles. A mechanistic study was performed using density functional theory aiming at explaining the observed reactivity and selectivity of the Cu (I)‐AMPS catalyst in CuAAC reactions.     

Copper nanoparticles supported on 2‐methoxy‐1‐phenylethanone‐functionalized MCM‐41: An efficient and recyclable catalyst for one‐pot three‐component C–S coupling reaction of aryl halides with benzyl bromide and thiourea

An environmentally friendly copper‐based catalyst supported on 2‐methoxy‐1‐phenylethanone‐functionalized MCM‐41 was prepared and characterized by Fourier transform‐infrared, transmission electron microscopy, field emission‐scanning electron microscopy, X‐ray diffraction and inductively coupled plasma techniques. The catalyst was applied for the one‐pot three‐component C–S coupling reactions of aryl halides with benzyl bromide and thiourea under aerobic conditions to afford the corresponding coupled products in good yields in water. The catalyst could be recovered and recycled five times. These results prove 2‐methoxy‐1‐phenylethanone‐functionalized MCM‐41 supported Cu (II) complex was not leached during the reaction. Also it shows the correct heterogeneous nature of the catalyst.     

Determination of Uric Acid and Norepinephrine by Chitosan‐Multiwall Carbon Nanotube Modified Electrode

A novel chemically modified electrode based on the chitosan‐multiwall carbon nanotube (MWNT) coated glassy carbon electrode (GCE) is described, which exhibited an attractive ability to determine uric acid (UA) and norepinephrine (NE) simultaneously. The responses of UA and NE merged into a large peak at a bare GCE, but yielded two well‐defined oxidation peaks at the chitosan‐MWNT modified GCE (MC/GCE). The experimental parameters were optimized, and a direct electrochemical method for the simultaneous determine for UA and NE is proposed. The MC/GCE showed good sensitivity, selectivity and stability.     

Preparation and characterization of Cu (II) supported on poly(8‐hydroxyquinoline‐p‐styrene sulphonate) and its application as catalyst for the synthesis of hexahydroquinolines

Cu ( II ) supported on poly(8‐hydroxyquinoline‐p‐styrenesulfonate) (Cu ( II )@PHQSS) was prepared and fully characterized by the different techniques including fourier transform infrared spectroscopy (FT‐IR), ¹H NMR, ¹³C NMR, thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), differential thermal analysis (DTA), scanning electron microscope (SEM) and energy dispersive X‐ray analysis (EDS). Afterward, the Cu ( II )@PHQSS as nanostructured catalyst was used as catalyst for the synthesis of hexahydroquinolines.