Analysis of DNA polymorphisms on the human Y-chromosome by microchip electrophoresis

Validation of microchip electrophoresis in DNA analysis has been carried out using an Agilent 2100 Bioanalyzer. With a DNA 500 Assay Kit, the reproducibility and accuracy of fragment sizing of a 10 bp DNA ladder have been shown to be satisfactory with the relative standard deviation and the relative error mostly below 1.0 and 5.0% (n = 12), respectively. Both intraday and interday validations of fragment sizing and quantitation have also been performed with a 7500 Assay Kit (n = 48). Although the results of quantitation are not as good as that of sizing, due to the manual introduction of samples and markers into the chip wells, they are still sufficient to carry out further analyses of practical samples. Based on such reliable results, fast analysis of DNA polymorphisms on the human Y-chromosome has been realized with microchip electrophoresis. The total analysis times of three genomic polymorphisms on the Y-chromosome, Y Alu polymorphism, 47z/StuI, and 12f2, are all within 100 s, and the relative standard deviation and relative error of fragment sizes are below 3.5 and 3.7%, respectively. In addition, a mixture of nine DNA markers on the human Y-chromosome related to examine the cause of spermatogenic failure have been separated successfully with the smallest fragment size difference of 7 bp. Our results demonstrate the potential of microchip electrophoresis in polymorphism analysis with the advantages of high speed, good reproducibility, high precision, and high resolution.     

样品稀释对毛细管电泳分离检测DNA片段的影响

通过理论推导和实验验证表明;适当稀释DNA样品溶液,采用流体力学进样或电动进样都不会较大地减低峰高,而DNA片段毛细管电泳的分离效率和分离度还能有所提高。采用稀释样品的方法可提高DNA样品的使用效率。采用羟乙基纤维素无胶筛分介质分离了DNA片段。用激光诱导荧光（氩离子激光器,488nm）电荷耦合器件检测。用低浓度的筛分介质（0．4％）分离了分子质量较大的ADNA－HindⅢ全部8个片段（12bp～23130bP）。用高浓度的筛分介质（1．6％）分离分子质量较小的pBR322－HaeⅢ22个片段（18bp～587bp）。     

On-line nanoliter cycle sequencing reaction with capillary zone electrophoresis purification for DNA sequencing

An integrated system for DNA sequencing based on a nanoreactor for cycle-sequencing reaction coupled with on-line capillary zone electrophoresis (CZE) for purification and capillary gel electrophoresis (CGE) for separation is presented. Less than 100 nl of premixed reagent solution, which includes dye-labeled terminator pre-mix, bovine serum albumin and template, was hydrodynamically injected into a fused-silica capillary (75 microm I.D.) inside a laboratory-made microthermocycler for cycle sequencing reaction. In the same capillary, the reaction products were purified by CZE followed by on-line injection of the DNA fragments into another capillary for CGE. Over 540 base pairs (bp) of DNA can be separated and the bases called for single-standed DNA with 0.9% error rate. The total time was about 3.5 h, or a cycle time of 2 h with staggered operation. For double-stranded DNA, a longer reaction time was required and base calling up to 490 bp with 1.2% error rate was achieved. The whole system is readily adaptable to automated multiplex operation for DNA sequencing or polymerase chain reaction analysis.     

Rapid single nucleotide polymorphism analysis by primer extension and capillary electrophoresis using polyvinyl pyrrolidone matrix

Rapid molecular diagnosis of 21-hydroxylase deficiency by detecting the most common mutation in the 21-hydroxylase gene is presented using primer extension and capillary electrophoresis with a polyvinyl pyrrolidone matrix. DNA samples were subjected to polymerase chain reaction (PCR) in order to amplify a 422 bp fragment of the CYP21 gene containing the single nucleotide polymorphism (SNP) site. This product served as a template in the primer extension reaction using a fluorescently labeled primer in close proximity to the SNP. ddGTP was used to block the extension if the mutation was present and the other three dNTPs to enable elongation of the primer. Fast analysis of the resulting fragments was performed by capillary electrophoresis using 10% polyvinylpyrrolidone as sieving and wall coating matrix. The Cy5-labeled primer and the two possible primer extension products (mutant and wild type) were completely separated in 90 s.     

Single-molecule analysis enables free solution hydrodynamic separation using yoctomole levels of DNA

Single-molecule free solution hydrodynamic separation (SML-FSHS) cohesively integrates cylindrical illumination confocal spectroscopy with free solution hydrodynamic separation. This technique enables single-molecule analysis of size separated DNA with 100% mass detection efficiency, high sizing resolution and wide dynamic range, surpassing the performance of single molecule capillary electrophoresis. Furthermore, SML-FSHS required only a bare fused silica microcapillary and simple pressure control rather than complex high voltage power supplies, sieving matrices, and wall coatings. The wide dynamic range and high sizing resolution of SML-FSHS was demonstrated by separating both large DNA (23 vs 27 kbp) and small DNA (100 vs 200 bp) under identical conditions. Separations were successfully performed with near zero sample consumption using as little as 5 pL of sample and 240 yoctomoles (～150 molecules) of DNA. Quantitative accuracy was predominantly limited by molecular shot noise. Furthermore, the ability of this method to analyze of single molecule nanosensors was investigated. SML-FSHS was used to examine the thermodynamic equilibrium between stochastically open molecular beacon and target-bound molecular beacon in the detection of E. coli 16s rRNA targets.     

Ultrafast, efficient separations of large-sized dsDNA in a blended polymer matrix by microfluidic chip electrophoresis: a design of experiments approach

Double-stranded (ds) DNA fragments over a wide size range were successfully separated in blended polymer matrices by microfluidic chip electrophoresis. Novel blended polymer matrices composed of two types of polymers with three different molar masses were developed to provide improved separations of large dsDNA without negatively impacting the separation of small dsDNA. Hydroxyethyl celluloses with average molar masses of ～27 kDa and ～1 MDa were blended with a second class of polymer, high-molar mass (～7 MDa) linear polyacrylamide. Fast and highly efficient separations of commercially available DNA ladders were achieved on a borosilicate glass microchip. A distinct separation of a 1-kb DNA extension ladder (200-40,000 bp) was completed in 2 min. An orthogonal design of experiments was used to optimize experimental parameters for DNA separations over a wide size range. We find that the two dominant factors are the applied electric field strength and the inclusion of a high concentration of low-molar mass polymer in the matrix solution. These two factors exerted different effects on the separations of small dsDNA fragments below 1 kbp, medium dsDNA fragments between 1 and 10 kbp, and large dsDNA fragments above 10 kbp.     

Single strand conformation polymorphism analysis of ras oncogene by capillary electrophoresis with laser-induced fluorescence detector

Single strand conformation polymorphism (SSCP) analysis of the N-ras oncogene was achieved by capillary electrophoresis with a laser-induced fluorescence detector (CE-LIF) using methylcellulose as a molecular sieving agent. The PCR-amplified N-ras oncogene, which is known to have a point mutation at codon 61 in the neuroblastoma, was investigated by CE-LIF combined with SSCP (SSCP-CE-LIF). A mixture of wild- and mutant-type single strand DNA fragments (103 bp) of the N-ras oncogene was separated by buffer solution containing 1.0% methylcellulose and 0.2 microM fluorescent dye (YO-PRO-1) at 25 degrees C. The SSCP-CE-LIF technique gave good resolution for wild- and mutant-type single strand DNA fragments with separation completed within 7 min. SSCP analysis using a CE system with a LIF detector was successfully applied to the detection of the one point mutation on the N-ras oncogene.     

Further Study on Separation of DNA Fragments by Capillary Electrophoresis by Quasi-interpenetrating Network of Polyacryamide and Polyvinylpyrrolidone with UV Detection

Quasi-interpenetrating network of polyacrylamide （PAA） and polyvinylpyrrolidone （PVP） had been successfully used for single-base resolution of double-stranded DNA （0.76 for 123 bp/124 bp） and single-stranded DNA fragments （0.97 for 123 b/124 b） with UV detection. This quasi-IPN （interpenetrating network） sieving matrix showed low viscosity （23.5 mPa·s at 25 ℃） and decreased with increasing temperature. This polymer also exhibited dynamically coating capacity and could be used in the uncoated capillary. The effects of temperature and electric field strength on the DNA separation of quasi-IPN matrix were also investigated and found that the temperature and electric field strength could markedly affected the mobility behavior of DNA fragments. This polymer matrix has also applied to separate the bigger DNA fragments by capillary electrophoresis with UV detection. Under the denaturing conditions, this matrix separated the samples with last fragment of 1353 base in 40 rain, in which the doublet of 309/310 base was partial separated and the resolution was 0.88.     

Use of a heterogeneous buffer combination in microchip electrophoresis for high-resolution separation by on-line concentration of DNA samples

We have developed a novel high-resolution separation technique of DNA fragments in a heterogeneous combination of a sample buffer and a separation buffer. The use of a heterogeneous buffer combination is a simple method for on-line concentration of DNA fragments, in which a sample buffer is simply exchanged with one including taurine anions. The mobility of taurine anions, co-ions for DNA, is lower than the that of acetate anions in a separation buffer. The difference in the mobility invokes transient isotachophoresis. The current technique allows DNA fragments to be effectively concentrated and the separation length of microchips to be shorter than that of conventional ones by a factor of three without deterioration in separation resolution and any modification of a chip design. Fragments of 100-bp DNA ladders (100-1000 bp) were separated with high resolution (0.72-10.7) within 60 s with a 10 mm separation length on a polymethyl methacrylate chip. Furthermore, fragments of 10-bp DNA ladders (10-330 bp) were separated with high resolution (0.69-2.00) with a 10 mm separation length within 50 s without band broadening. The current achievements will make it possible to fabricate compact devices for microchip electrophoresis.     

Low-cost, high-sensitivity laser-induced fluorescence detection for DNA sequencing by capillary gel electrophoresis.

A low cost, 0.75-mW helium neon laser, operating in the green region at 534.5 nm, is used to excite fluorescence from tetramethylrhodamine isothiocyanate-labelled DNA fragments that have been separated by capillary gel electrophoresis. The detection limit (3 sigma) for the dye is 500 ymol [1 yoctomole (1 ymol) = 10(-24) mol] or 300 analyte molecules in capillary zone electrophoresis; the detection limit for labeled primer separated by capillary gel electrophoresis is 2 zmol [1 zeptomole (1 zmol) = 10(-21) mol]. The Richardson-Tabor peak-height encoded sequencing technique is used to prepare DNA sequencing samples. In 6% T, 5% C acrylamide, 7 M urea gels, sequencing rates of 300 bases/hour are produced at an electric field strength of 200 V/cm; unfortunately, the data are plagued by compressions. These compressions are eliminated with addition of 20% formamide to the sequencing gel; the gel runs slowly and sequencing data are generated at a rate of about 70 bases/hour.     

Separation of double-stranded DNA fragments by capillary electrophoresis: Impacts of poly(ethylene oxide), gold nanoparticles, ethidium bromide, and pH

The separation of DNA by capillary electrophoresis using poly(ethylene oxide) (PEO) containing gold nanoparticles (GNPs) is presented. The impacts of PEO, GNPs, ethidium bromide (EtBr), and pH on the separation of double-stranded DNA have been carefully explored. Using a capillary dynamically coated with 5.0% poly(vinylpyrrolidone) and filled with 0.2% PEO containing 0.3 x GNPs (the viscosity less than 15 cP), we have demonstrated the separation of DNA markers V and VI within 5 min at pH 8.0 and 9.0. In terms of resolution and reproducibility, GNPs have a greater impact on the separation of DNA at pH 9.0. Resolution improvements for large DNA fragments (> 300 base pairs, bp) are greater than those for small ones in the presence of GNPs. It is important to point out that reproducibility is excellent (relative standard deviations for the migration times less than 0.5%) and thus no further dynamic coating is required in at least 20 consecutive runs in the presence of GNPs. Using 0.2% PEO (pH 9.0) containing 0.3 x GNPs, the separation of DNA fragments ranging in size from 21 to 23,130 bp was accomplished in 7 min. The results presented in this study show the advantage of PEO containing GNPs for DNA separation, including rapidity, high resolving power, excellent reproducibility, and ease of filling capillaries.     

Analysis of a biopolymer by capillary electrophoresis with a chemiluminescence detector using a polymer solution as the separation medium.

We developed capillary electrophoresis with a chemiluminescence detector using a polymer solution as the separation medium for the analysis of biopolymers, such as DNA and protein. A peroxyoxalate chemiluminescence reagent of bis(2,4,6-trichlorophenyl)oxalate was used together with fluorescein-labeling reagent. When a migration buffer solution containing carboxylmethylcellulose was used, the flow-type chemiluminescence detection cell was found to give a better resolution than the batch-type one. Fluorescein-labeled adenosine triphosphate of 1.0 x 10(-4) M was examined by means of capillary electrophoresis with absorption (260 nm), fluorescence (ex. 496 nm and em. 517 nm), and chemiluminescence detectors. The chemiluminescence detection showed the highest sensitivity among them; the S/N ratios obtained by absorption, fluorescence, and chemiluminescence detections were 4, 38, and 130, respectively. Fluorescein-labeled DNA was prepared through a polymerase chain reaction using fluorescein-labeled deoxyadenosine triphosphate. A mixture of the labeled DNA fragments (500, 600, 700, 800, 900, and 993 bp) was successfully separated and detected by the present system. A mixture of proteins (lysozyme, cytochrome C, and ribonuclease A) which were labeled with fluorescein isothiocyanate was also separated and detected.     

Disposable polyester-toner electrophoresis microchips for DNA analysis

Microchip electrophoresis has become a powerful tool for DNA separation, offering all of the advantages typically associated with miniaturized techniques: high speed, high resolution, ease of automation, and great versatility for both routine and research applications. Various substrate materials have been used to produce microchips for DNA separations, including conventional (glass, silicon, and quartz) and alternative (polymers) platforms. In this study, we perform DNA separation in a simple and low-cost polyester-toner (PeT)-based electrophoresis microchip. PeT devices were fabricated by a direct-printing process using a 600 dpi-resolution laser printer. DNA separations were performed on PeT chip with channels filled with polymer solutions (0.5% m/v hydroxyethylcellulose or hydroxypropylcellulose) at electric fields ranging from 100 to 300 V cm(-1). Separation of DNA fragments between 100 and 1000 bp, with good correlation of the size of DNA fragments and mobility, was achieved in this system. Although the mobility increased with increasing electric field, separations showed the same profile regardless of the electric field. The system provided good separation efficiency (215,000 plates per m for the 500 bp fragment) and the separation was completed in 4 min for 1000 bp fragment ladder. The cost of a given chip is approximately $0.15 and it takes less than 10 minutes to prepare a single device.     

21世纪毛细管电泳技术及应用发展趋势

在21世纪，毛细管电泳技术面临着新的挑战和机遇，在其检测手段，仪器的小型化和集成化，以及分离模式上都存在着极大的发展空间，文中针对这三方面的发展趋势和毛细管电泳的应用进行了讨论。     

Voltage‐programming‐based capillary gel electrophoresis for the fast detection of angiotensin‐converting enzyme insertion/deletion polymorphism with high sensitivity

A voltage‐programming‐based capillary gel electrophoresis method with a laser‐induced fluorescence detector was developed for the fast and highly sensitive detection of DNA molecules related to angiotensin‐converting enzyme insertion/deletion polymorphism, which has been reported to influence predisposition to various diseases such as cardiovascular disease, high blood pressure, myocardial infarction, and Alzheimer's disease. Various voltage programs were investigated for fast detection of specific DNA molecules of angiotensin‐converting enzyme insertion/deletion polymorphism as a function of migration time and separation efficiency to establish the effect of voltage strength to resolution. Finally, the amplified products of the angiotensin‐converting enzyme insertion/deletion polymorphism (190 and 490 bp DNA) were analyzed in 3.2 min without losing resolution under optimum voltage programming conditions, which were at least 75 times faster than conventional slab gel electrophoresis. In addition, the capillary gel electrophoresis method also successfully applied to the analysis of real human blood samples, although no polymorphism genes were detected by slab gel electrophoresis. Consequently, the developed voltage‐programming capillary gel electrophoresis method with laser‐induced fluorescence detection is an effective, rapid analysis technique for highly sensitive detection of disease‐related specific DNA molecules.     

Simplex maximization of the correlation coefficient for DNA sizing analysis by capillary electrophoresis

The separation of DNA molecules in polymeric solution by capillary electrophoresis involves the optimization of several variables, such as polymer solution concentration, electric field separation, temperature, etc. The optimization of each variable individually usually is a time-consuming process and the results may reach a false optimum point. Chemometric methods are suitable to be applied in such cases in which a number of variables can be optimized simultaneously. The simplex is a chemometric method that can perform such a task easily and efficiently. In this study, a simplex method was carried out to maximize the correlation coefficient (r(2)) of a logarithmic plot of mobility (mu) vs. base pair (bp), which was obtained from the separation of DNA fragments of size between 75 and 4072 bp. The simplex showed three vertexes with r(2) > 0.98 and the vertex 21 showing the highest resolution. For the fragments between 201 and 2036 bp, the r(2) increased to 0.992 with and relative standard deviation (RSD) lower than 0.2% (inter- and intra-day variation). The precision of the method in determining the size of a PCR DNA fragment was carried out using a 1 kbp DNA ladder. With the addition of an internal standard to the sample, the precision could be further improved.     

Poly(N-isopropylacrylamide)-g-poly(ethyleneoxide) for high resolution and high speed separation of DNA by capillary electrophoresis.

A new separation medium, poly(N-isopropylacrylamide)-g-poly(ethyleneoxide) (PNI-PAM-g-PEO) solution, used for double-stranded (ds) DNA separation by capillary electrophoresis (CE) is presented. This type of grafted copolymer has a good self-coating ability for quartz capillary tubing and a slightly temperature-dependent viscosity-adjustable property, making it easier to use. One bp resolution was achieved within 12.5 min by using 8% w/v PNIPAM-gPEO in 1 x TBE (Tris-borate-ethylenediaminetetraaceticacid) buffer with an effective column length of 10 cm and an applied electric field strength of 200 V/cm. The PNIPAM-g-PEO solutions had a high sieving ability for relatively small sized DNAs with the relative standard derivation for the first 10 runs being less than 0.9% by using the same polymer solution. With 8% w/v PNIPAM-g-PEO solution in a 1.5 cm column and 2400 V as the running voltage, phiX174/HaeIII digest could be clearly separated within 24 s.     

Glycerol-salt Mediated Stacking of Nucleic Acids in CZE

Nucleic acid samples with high concentrations of salt could be stacked and well separated during capillary zone electrophoresis (CZE) by adding glycerol into the samples and using a Tris-Borate-EDTA (TBE) buffer (pH 8.3) as the separation medium. The so-called glycerol-salt mediated stacking was found applicable to different types of nucleic acids. Three nucleic acids: a 16s rRNA (1,542 nt), a double stranded DNA (1.6 k bp), and a single stranded DNA (30 nt), were tested as demos in the experiments. When the sample matrix contained 50 mM KCl and 50% (w/v) glycerol, the 16s rRNA sample could be stacked as high as 30 times compared with the sample without KCl. All the nucleic acids could be stacked effectively when high concentrations of glycerol (>50%) and salt (more than 50 mM) were present in the sample matrix, while the dsDNA could be stacked with high concentrations of glycerol (>50%) alone. Cen Qi and Hongping Wei contributed equally to this work.     

Discontinuous buffer system for polyacrylamide and agarose gel electrophoresis of DNA fragments

DNA fragments up to 9 kb in size were stacked and separated by polyacrylamide gel electrophoresis, and those up to 50 kb in size by agarose gel electrophoresis, using a discontinuous buffer system. Polyacrylamide gels at pH 8.9, 2 degrees C, 0.01 M ionic strength, yielded sharp bands with DNA loads of 8 micrograms/cm2 of gel of a mixture of 19 DNA fragments in the size range of 72-23130 bp, while agarose gels at pH 8.5, 25 degrees C, provided well-resolved, unperturbed bands at 0.04 M ionic strength with DNA loads of 1 microgram/cm2 of the same mixture. Note that the ionic strength of the agarose gels is comparable to the conventionally used 0.5 x TBE (Tris-borate-EDTA) buffer, while that successfully applied to polyacrylamide is seven-fold less than the ionic strength of conventionally used 1 x TBE buffer, with a substantially shorter duration of electrophoresis as a result. The application of a discontinuous buffer system to the gel electrophoresis of DNA results in (i) Band identification by Rf, the migration distance relative to a sharply defined "buffer front" (moving boundary). This is sufficiently labor saving, compared to determining absolute mobilities, so as to render practical the expression of bands as numbers, with benefits for data storage, statistical manipulations and physico-chemical exploitation of mobility data. The use of Rf's also circumvents loss of precision in mobility measurement resulting from progressive band spreading of dye bands used as a front. (ii) A uniformly and highly concentrated starting zone, beneficial to resolution, is obtained, without the losses by which separate concentration steps are usually burdened.(ABSTRACT TRUNCATED AT 250 WORDS)     

DNA Extraction from Formalin-fixed and Paraffin-embedded Tissues by Triton X-100 for Effective Amplification of EGFR Gene by Polymerase Chain Reaction

For first-line non-small-cell lung cancer(NSCLC) therapy, detecting mutation status of the epidermal growth factor receptor(EGFR) geneconstitutes a prudent test to identify patients who are most likely to benefit from EGFR-tyrosine kinase inhibitor(TKI) therapy. Now, the material for detecting EGFR gene mutation status mainly comes from formalin-fixed and paraffin-embedded(FFPE) tissues. DNA extraction from FFPE and the amplification of EGFR gene by polymerase chain reaction(PCR) are two key steps for detecting EGFR gene mutation. We showed a simple method of DNA extraction from FFPE tissues for the effective amplification of EGFR gene. Extracting DNA from the FFPE tissues of NSCLC patients with 1% Triton X-100(pH=10.0) was performed by heating at 95℃ for 30 min. Meanwhile, a commercial kit was used to extract DNA from the same FFPE tissues of NSCLC patients for comparison. DNA extracted products were used as template for amplifying the exons 18, 19, 20 and 21 of EGFR by PCR for different amplified fragments. Results show that DNA fragment size extracted from FFPE tissues with 1% Triton X was about 250-500 base pairs(bp). However,DNA fragment size extracted from FFPE tissues via commercial kit was about from several hundreds to several thousands bp. The DNA yield extracted from FFPE tissues with 1% Triton X was larger than that via commercial kit. For about 500 bp fragment, four exons of EGFR could not be amplified more efficiently from extracted DNA with 1% Triton X than with commercial kit. However, for about 200 bp fragment. This simple and non-laborious protocol could successfully be used to extract DNA from FFPE tissue for the amplification of EGFR gene by PCR, further screening of EGFR gene mutation and facilitating the molecular analysis of a large number of FFPE tissues from NSCLC patients.