Separation of Iron(III) with Ammonium Thiocyanate‐H2O‐n‐Propyl Alcohol Extraction System in the Presence of Sodium Chloride

The behavior and conditions of liquid‐liquid extraction‐separation of Fe(III) by ammonium thiocyanate‐H₂O‐n‐propyl alcohol system in the presence of NaCl were studied, and the possible reactive mechanism of extraction of Fe(III) was deduced. The study showed that, in the presence of a given amount of NaCl, phases were separated thoroughly between n‐propyl alcohol and water. In the process of phase separation, the complex [Fe(SCN)_n]^(3‐n) formed by NH₄SCN and Fe(III) was quantitatively extracted into the n‐propyl alcohol phase. The extracted Fe(III) exists in the n‐propyl alcohol phase mainly as the forms of Fe(SCN)₂⁺ and Fe(SCN)₃. Also, the relationship between extraction yield of Fe(III) and the amount of NH₄SCN agreed well with the quadratic equation E = 0.54 + 58.14x ? 8.39x² (E and x represent the recovery rate of Fe(III) and the volume (mL) of 0.1 M NH₄SCN respectively). The quadratic R‐Square is 0.9990. With this method, Fe(III) can be completely separated from Co(II), Ni(II), Mn(II), Al(III), Bi(III) and Cd(II) at pH 1.0?2.0. The present method was applied in determining Fe(III) in samples with satisfactory results such as relative standard deviation from 2.06% to 2.89% and recovery rate in the range of 98.4?101.4%.     

Three-Component Coupling Synthesis of Diversely Substituted N-Aryl Pyrroles Catalyzed by Iron(III) Chloride

An efficient and operationally simple three-component coupling synthesis of varieties of N-aryl substituted pyrroles is described in the presence of sustainable and environmentally benign metal catalyst, FeCl₃. This method provides a straightforward approach for the synthesis of N-aryl substituted pyrroles in good yields from easily accessible starting materials such as nitroalkenes, 1,3-dicarbonyl compounds, and primary aromatic amines. The reaction proceeds through a catalytic sequence of Fe(III)-catalyzed amination/Michael/cycloisomerization reactions.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Investigations of Reactivity and Magnetic Properties of Nanostructured Iron Oxide within Mesoporous Silica Materials

The change in reactivity for nanostructured iron oxide within mesoporous silica materials is demonstrated. Iron oxides were incorporated into the pore system of MCM‐41 and MCM‐48 silica materials and characterized by powder X‐ray diffraction and nitrogen physisorption. Iron oxide shows significant changes in the reducibility by hydrogen compared to comparable bulk iron oxide phases. Partially reduced iron oxides within the mesoporous host were characterized by X‐ray absorption spectroscopy and SQUID measurements.     

Reactivity of Binary and Ternary Sulfur Halides towards Transition-Metal Compounds

Binary sulfur fluorides exhibit an interesting reactivity towards transition metal complexes. They open up routes for the generation of sulfur-containing building blocks. Often ligands with particular properties can be constructed. This includes their ability to transfer sulfur atoms or polysulfide units as well as fluorination reactions. This Minireview provides an insight into the reactivity of the binary and ternary sulfur halides S₂Cl₂, SCl₂, SF₄, SF₆ and SF₅Cl towards transition-metal compounds.     

Iron(II) and Iron(III) Perchlorate Complexes of Ciprofloxacin and Norfloxacin

The reactions of ciprofloxacin (CIP) and norfloxacin (NOR) with iron(II) and iron(III) perchlorate have been investigated. The optical spectra support the formation of four complexes for each oxidation state with 1 : 1, 1 : 2, 1 : 3 and 1 : 4 metal to ligand molar ratios. The electrical conductivity and magnetic susceptibility measurements show that the isolated complexes are high spin and the Fe(ClO 4 ) 2 and Fe(ClO 4 ) 3 complexes behave as 1 : 2 and 1 : 3 electrolytes, respectively. The IR spectra indicate that CIP and NOR bind to the iron ion as bidentate ligands through the carbonyl oxygen atom and one of the oxygen atoms of the carboxylate group.     

O-Tolyldithiocarbonate Complexes of Iron(II) and Iron(III)

Abstract

Reactions of O-tolyldithiocarbonate ligands, (o-, m-, and p-CH₃C₆H₄O)CS₂Na, with anhydrous FeCl₂ (1:2 molar ratio) and with FeCl₃ (1:1 and 1:3 molar ratio) yielded the complexes [{(CreO)CS₂}₂Fe] and [{(CreO)CS₂}_nFeCl_3–n] (Cre = o-, m-, and p-CH₃C₆H₄; n = 1 and 3), respectively. These complexes were reacted with nitrogen and phosphorus donor ligands in dichloromethane, which afforded the adducts corresponded to [{(CreO)CS₂}₂Fe.xL] and [(CreO)CS₂FeCl₂.xL] {x = 1, L = N₂C₁₂H₈; x = 2, L = NC₅H₅, P(C₆H₅)₃}. Elemental analyses and IR, UV-visible, and mass spectroscopic and magnetic studies indicated bidentate mode of bonding by dithiocarbonate ligands leading to sixcoordination around the iron atom as a consequence of Fe…Fe interaction in the complexes [{(CreO)CS₂}₂Fe] and [(CreO)CS₂FeCl₂]. The complexes exhibited antifungal activity. The fungicidal activity of the complexes has been tested by poisoned food technique using fungi Fusarium sp.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental resource: Antifungal Activity.     

Facile Syntheses of pure Uranium(III) Halides: UF3, UCl3, UBr3, and UI3

Herein we describe a convenient lab scale synthesis for pure and solvent‐free binary uranium(III) halides UCl₃, UBr₃, and UI₃. This is achieved by the reduction of the respective uranium(IV) halides with elemental silicon in borosilicate ampoules at moderate temperature. The silicon tetrahalides SiX₄ formed as a side product are utilized for the removal of excess starting material via a chemical vapor transport reaction. The syntheses introduced herein avoid the need for pure metallic uranium and are based on uranium(IV) halides synthesized from UO₂ and the respective aluminum halides and purified by chemical vapor transport. These uranium(III) halides are obtained in single crystalline form. A similar reaction yields UF₃ as a microcrystalline powder. However, no beneficial transport reaction occurs with this halide. Also, a higher temperature has to be applied and steel ampoules have to be used. The identities and purity of the products were checked by powder X‐ray diffraction as well as IR spectroscopy. The synthesis of UI₃ enabled its crystal structure determination on single crystals for the first time. UI₃ crystallizes in the PuBr₃ structure type with space group type Cmcm and a = 4.3208(9), b = 13.923(3), c = 9.923(2) Å, V = 596.9(2) ų, and Z = 4 at T = 100 K.     

Structure and Reactivity of Iron(0)-Phenyltellurolate [PPN][PhTeFe(CO)4]

Anionic iron(0) tetracarbonyl with terminal phenyltellurolate ligand PhTe^?, [PhTeFe(CO)₄]^?, has been synthesized and characterized. The title compound was obtained by addition of (PhTe)₂ to [PPN][HFe(CO)₄] THF solution dropwise. [PPN][PhTeFe(CO)₄] crystallizes in the monoclinic space group C c, with a = 16.119(4) Å, b = 13.141(3) Å, c = 19.880(8) Å, β = 93.04(3)°, V = 4205(2) ų, and Z = 4. The [PhTeFe(CO)₄]^? anion is a trigonal-bipyramidal complex in which the phenyltellurolate ligand occupies an axial position with Fe-Te bond length 2.630(5) Å and the Fe-Te-C(Ph) angle is 103.4(5)°. The neutral iron(0)-telluroether compound, (PhTeMe)Fe(CO)₄, was prepared by alkylation of the [PhTeFe(CO)₄]^?. Protonation of [PhTeFe(CO)₄]^?and reaction of H₂Fe(CO)₄ and PhTe)₂ ultimately lead to formation of the known dimer Fe₂(μ-TePh)₂(CO)₆ and H₂.     

Iron(III)-selective dendritic chelators

Two novel iron(III)-selective hexadentate chelator-terminated dendrimers have been synthesized in high yields. MALDI-TOF mass spectra demonstrate that both dendritic chelators bind iron(III) efficiently. Preliminary studies show that these molecules possess a high affinity for iron(III).     

Diethylenetriammonium Aquapentachloroferrate(III) Chloride: Structure and Magnetic Properties

Diethylenetriamine (dien) and iron(III) chloride in aqueous HCl yield (dienH₃) [FeCl₅(H₂O)]Cl, in which the chloroferrate(III) anion is significantly distorted from octahedral symmetry due to the extensively hydrogen‐bonded lattice. On cooling, the high spin Fe^III material shows weak antiferromagnetic coupling that results in a Néel temperature of 2.70 K.     

Iron(II) and iron(III) complexes containing ethynyl thiophene fragments

The synthesis of the new complexes Cp*(dppe)FeCC2,5-C₄H₂SR (Cp* = 1,2,3,4,5-pentamethylcyclopentadienyl; dppe = 1,2-bis(diphenylphosphino)ethane; 2a, R = CCH; 2b, R = CCSi(CH₃)₃; 2c, R = CCSi(CH(CH₃)₂)₃; 3a, R = CC2,5-C₄H₂SCCH; 3c, R = CC2,5-C₄H₂SCCSi(CH(CH₃)₂)₃) is described. The ¹³C NMR and FTIR spectroscopic data indicate that the π-back donation from the metal to the carbon rich ligand increases with the size of the organic π-electron systems. The new complexes were also analyzed by CV and the chemical oxidation of 2a and 3c was carried out using 1 equiv of [Cp₂Fe][PF₆]. The corresponding complexes 2a[PF₆] and 3c[PF₆] are thermally stable, but 2a[PF₆] was too reactive to be isolated as a pure compound. The spectroscopic data revealed that the coordination of large organic π-electron systems to the iron nucleus produces only a weak increase of the carbon character of the SOMO for these new organoiron(III) derivatives.     

Iron(III) chloride and its coordination chemistry

Abstract

The coordination chemistry of FeCl₃ is distinctly different to that of the other 3d metal halides. It has a distinct preference for O-donor ligands. Although it primarily forms six-coordinate complexes, it has some distinctive features that set it apart from metals like Mn(II), Co(II), and Ni(II), such as the self-ionized complexes [FeL₄Cl₂]⁺ [FeCl₄]^?. There are a number of examples where very small changes in the coordination sphere tilt the balance between isomeric structures. Chloride has a significant steric effect in the coordination sphere as well as a greater trans-influence than water.     

Iron(III)-siderophore coordination chemistry: Reactivity of marine siderophores

Two remarkable features of many siderophores produced by oceanic bacteria are the prevalence of an α-hydroxy-carboxylic acid functionality either in the form of the amino acid β-hydroxy aspartic acid or in the form of citric acid, as well as the predominance of amphiphilic siderophores. This review will provide an overview of the photoreactivity that takes place when siderophores containing β-hydroxy aspartic acid and citric acid are coordinated to iron(III). This photoreactivity raises questions about the role of this photochemistry in microbial iron acquisition as well as upper-ocean iron cycling. The self-assembly of amphiphilic siderophores and the coordination-induced phase-change of the micelle-to-vesicle transformation will also be reviewed. The distinctive photosensitive and self-assembly properties of marine siderophores hint at possibly new microbial iron acquisition mechanisms.     

On the Reaction of Triphenyltrithiophosphites with Copper (I) and Copper(II) Halides

Abstract

Reactions of triphenyltrithiophosphite (PhS)₃P with copper (I) and copper (II) halides (CuHal, CuHal₂, where Hal=Cl, Br) have been investigated.     

铁-荧光镓极谱络合吸附波的研究

在 p H6.1 0的 0 .1 mol/L ( CH2 ) 6 N4-HCl底液中 ,用单扫示波极谱法可获得铁( ) -荧光镓体系灵敏的络合吸附波。在 1 .0× 1 0 - 7～ 7.0× 1 0 - 6 mol/L范围内 ,铁浓度与波高呈线性关系 ,检测限达 7.0× 1 0 - 8mol/L,已成功地应用于金属镁粉中的铁和铝的测定 ,并测得电活性络合物的组成为铁∶荧光镓 =1∶ 1 ,条件形成常数β=3 .2× 1 0 4,表面电极反应速率常数 ks为 2 .9s- 1 。     

氯乙烯/N-取代马来酰亚胺共聚竞聚率及共聚物组成

研究了氯乙烯(VC)与多种N-取代马来酰亚胺的溶液共聚合,求得各对单体的竞聚率.结果表明,各种马来酰亚胺的竞聚率都远高于VC的竞聚率,即N-取代马来酰亚胺单体的活性均比VC单体活性高.计算得到N-取代马来酰亚胺Q和e值.由于苯环的共轭效应,N-苯基及N-取代苯基马来酰亚胺具有较大的Q值.各对单体的e值差别较大,表明有形成交替共聚物的倾向.此外,还考察了聚合过程中共聚物组成的变化,用递推法预测了这类体系共聚物瞬时和累积组成随转化率的变化.     

Extraction of Iron(III) with Tributyl Phosphate from Bromide Solutions

Russian Journal of Applied Chemistry - The extraction of iron(III) with tributyl phosphate from bromide aqueous solutions in the electrochemical processing of natural waters and brines was studied....     

Preparation of Metallaiminophosphoranes and Their Reactivity

Treatment of [Cp*(CO) 2 M{P(NHPh)(OMe) 2 }]PF 6 (M = Fe and Ru) with NaNH 2 gives metallaiminophosphoranes, Cp*(CO) 2 M{P(NPh)(OMe) 2 }. The x-ray structures and reactivity of the complexes are reported.