Raman spectroscopic investigation of the phase behavior and phase transitions in a poly(methyl methacrylate)‐carbon dioxide system

Laser Raman spectroscopy, in conjunction with an optical high‐pressure cell, was used to investigate the poly(methyl methacrylate)‐carbon dioxide system. The Raman shifts associated with carbon dioxide molecules in the gas phase and those dissolved in the polymer were used to derive sorption kinetics of carbon dioxide and the carbon dioxide‐induced phase changes in the polymer. Measurements were made in the temperature and pressure ranges in which this system is known to exhibit retrograde vitrification behavior. The Raman results on the sorption kinetics and on the onset of plasticization were in agreement with those obtained by gravimetric and calorimetric techniques, respectively. This technique provides a versatile and rapid way of characterizing polymer‐gas systems and information that so far has been obtainable only through painstaking and time‐consuming techniques. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2214–2217, 2003     

New materials for optical rectification and electrooptic sampling of ultrashort pulses in the terahertz regime

The synthesis and nonlinear optical characterization of new electrooptic (EO) materials useful for terahertz (THz) applications is presented. Semiempirical calculations were used to guide the development of a series of chromophores on the basis of 2‐dicyanomethylen‐3‐cyano‐4,5,5‐trimethyl‐2,5‐dihydrofuran acceptors acting as guests in polymer films used in the generation of THz radiation via optical rectification. Amorphous films, 65–250 μm thick, with EO coefficients as high as 52 pm/V at 785 nm were used to generate sub‐picosecond pulses with bandwidths up to 3 THz. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2492–2500, 2003     

13Carbon nuclear magnetic resonance of ethylene–propylene–1‐decene terpolymers

Many studies have been reported on the ¹³C NMR characterization of ethylene–α‐olefin copolymers, but only a few have been reported on terpolymers. The incorporation of an α‐olefin into the polyethylene chain changes the structure and, consequently, the properties of the polymer obtained. Looking for new products, we obtained a series of ethylene–propylene–1‐decene terpolymers with the metallocenic system rac‐ethylene bisindenyl zirconium dichloride/methylaluminoxane. We performed a complete ¹³C NMR characterization of these terpolymers qualitatively and quantitatively. Here we present a detailed study of the ¹³C NMR chemical shifts, triad sequence distributions, monomer average sequence lengths, and reactivity ratios for these terpolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2531–2541, 2003     

Polymer proton‐conduction systems based on commercial polymers. I. Synthesis and characterization of hydrogenated styrene–butadiene block copolymer and isobutylene isoprene rubber systems

This work describes the synthesis and characterization of two nonfluorinated proton‐conducting polymer systems, one consisting of a hydrogenated styrene–butadiene rubber (HSBR) block copolymer and the other consisting of an HSBR blend with isobutylene isoprene rubber for the improved mechanical stability of the final product. The films obtained were crosslinked, sulfonated, and microstructurally and electrically characterized. In addition, water and methanol crossover was determined, the results being compared with those of Nafion 117. The properties measured in the different samples confirmed that these systems may constitute a valid alternative to commercial membranes, being low‐cost and less polluting and having a lower methanol crossover. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2809–2815, 2003     

Selective retention of some polyaromatic hydrocarbons by highly crosslinked polymer networks

Highly crosslinked polymer networks were characterized in terms of structural differences based on the crosslinked network structures with their chromatographic molecular retentivity for some polyaromatic hydrocarbons (PAHs). Because PAHs and some sterically bulky solutes were used in the chromatographic characterization, tiny differences in the crosslinked polymer networks were observed in terms of the chromatographic molecular retentivity. Ethylene dimethacrylate afforded molecular retentivity for anthracene, and this recognition ability changed with the polymerization time. In addition, 1,4‐butanediol dimethacrylate afforded molecular retentivity for pyrene, and this retentivity was larger than that for anthracene. The polymerization methods also affected the resulting polymer networks drastically. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2556–2566, 2005     

Molecular weight control of polyacrylamide with sodium formate as a chain‐transfer agent: Characterization via size exclusion chromatography/multi‐angle laser light scattering and determination of chain‐transfer constant

We discuss the synthesis and characterization of polyacrylamide (PAM) homopolymers with carefully controlled molecular weights (MWs). PAM was synthesized via free‐radical solution polymerization under conditions that yield highly linear polymer with minimal levels of hydrolysis. The MW of the PAM homopolymers was controlled by the addition of sodium formate (NaOOCH) to the polymerization medium as a conventional chain‐transfer agent. MWs and polydispersity indices (PDIs) were determined via size exclusion chromatography/multi‐angle laser light scattering analysis; for polymerizations carried out to high conversion, PAM MWs ranged from 0.23 to 6.19 × 10⁶ g/mol, with most samples having PDI ≈2.0. Zero‐shear intrinsic viscosities of the polymers were determined via low‐shear viscometry in 0.514 M NaCl at 25 °C. Data derived from the polymer characterization were used to determine the chain‐transfer constant to NaOOCH under the given polymerization conditions and to calculate Mark–Houwink–Sakurada K and a values for PAM in 0.514 M NaCl at 25 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 560–568, 2003     

Theoretical simulation of thermally induced phase separation in a main‐chain liquid‐crystalline polymer solution

Phase diagrams of main‐chain liquid‐crystalline polymer (MCLCP) solutions have been calculated self‐consistently on the basis of a simple addition of the Flory–Huggins free energy for isotropic mixing, the Maier–Saupe free energy for nematic ordering, and the Flory free energy for chain rigidity of the MCLCP backbone. The calculated phase diagram is an upper critical solution type overlapping with the nematic–isotropic transition. The phase diagram consists of liquid–liquid, liquid–nematic, and pure nematic regions. Subsequently, the dynamics of thermally induced phase separation and morphology development have been investigated by the incorporation of the combined free energy density into the coupled time‐dependent Ginzburg–Landau (model C) equations, which involve conserved compositional and nonconserved orientational order parameters. The numerical calculations reveal a variety of the morphological patterns arising from the competition between liquid–liquid phase separation and nematic ordering of the liquid‐crystalline polymer. Of particular interest is the observation of an inflection in the growth dynamic curve, which may be attributed to the nematic ordering of the MCLCP component, which leads to the breakdown of the interconnected domains. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 913–926, 2003     

Synthesis of functional graft copolymers by solution copolymerization and their evaluation as dispersants in nonaqueous phase dispersion polymerization

The poly(HEMA‐co‐MMA‐g‐PMMA) graft copolymer was prepared with a poly(methyl methacrylate) (PMMA) macromonomer, 2‐hydroxyethyl methacrylate (HEMA), and methyl methacrylate (MMA), and its application as a dispersant for the nonaqueous phase dispersion polymerization of polystyrene (PST) was investigated. Monodisperse PST particles were obtained with two‐dimensionally tailored graft copolymers, with the number of grafted chains controlled and the polar component (HEMA) in the backbone chains balanced. As for the reactor, a stirred vessel with moderate agitation yielded uniform polymer particles, whereas sealed glass ampules with an overturning motion yielded broader size distributions. Increasing the polarity of the solvent in the continuous phase yielded smaller polymer particles with a gradual deterioration of monodispersity. Uniform polymer particles with a coefficient of variation of less than 6% were obtained up to 30 wt % solid contents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1788–1798, 2003     

Modification of the microstructure of emulsion polymers

The effect of treating several commercially important emulsion polymers with different initiator systems was investigated. The initiator system producing highly reactive tert‐butoxyl radicals was able to cause polymer modification. This represented an opportunity to extend the range of properties achievable with a given emulsion polymer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3744–3749, 2003     

Coagulation method for preparing single-walled carbon nanotube/poly(methyl methacrylate) composites and their modulus,electrical conductivity,and thermal stability

A coagulation method providing a better dispersion of single-walled carbon nanotubes (SWNTs) in a polymer matrix was used to produce SWNT/poly(methyl methacrylate) (PMMA) composites. Optical microscopy and scanning electron microscopy showed an improved dispersion of SWNTs in the PMMA matrix, a key factor in composite performance. Aligned and unaligned composites were made with purified SWNTs with different SWNT loadings (0.1–7 wt %). Comprehensive testing showed improved elastic modulus, electrical conductivity, and thermal stability with the addition of SWNTs. The electrical conductivity of a 2 wt % SWNT composite decreased significantly (>10⁵) when the SWNTs were aligned, and this result was examined in terms of percolation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3333–3338, 2003     

Macromolecules at surfaces: Research challenges and opportunities from tribology to biology

A comprehensive review of ongoing and recommended research directions concerning the structure, dynamics, and interfacial activity of synthetic and naturally occurring macromolecules at the solid–liquid interface is presented. Many new developments stem from the ability to target new size regimes of 1–100 nm. These rapid developments are reviewed critically with respect to chemical synthesis, processing, structural characterization, dynamic processes, and theoretical and computational analysis. The common problems shared by flat and particulate surfaces are emphasized. A broad spectrum of material properties are discussed, from the control of interfacial friction between surfaces in moving contact, to the mechanical strength and durability of the interfaces in hybrid materials, to optical and electronic properties. Future research opportunities are identified that involve (1) the emergence of nanoscale material properties, (2) polymer‐assisted nanostructures, and (3) the crossroads between interfacial science and biological and bioinspired applications. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2755–2793, 2003     

Study of the phase transition of poly(N,N‐diethylacrylamide) in water by rheology and dynamic light scattering

Poly(N,N‐diethylacrylamide) (PDEA) possesses a lower critical solution temperature (LCST) in aqueous media. The solution properties of PDEA at various temperatures have been characterized with techniques such as rheology and dynamic light scattering. There is a decrease in the coil size before the phase transition due to a coil‐to‐globule transition. At the LCST, rheological and dynamic light scattering studies have also confirmed an aggregation phenomenon. This aggregation modifies the rheological properties of the polymer solutions. High frequencies hinder the phase‐transition process and reduce the LCST of the polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1627–1637, 2003     

Thermal transitions of benzene in copolymers and interpenetrating polymer networks based on hydrophilic and hydrophobic components: Experimental evidence of hydrophobic interaction

Thermal transitions of benzene in a hydrophobic polymer network have been explained by us in terms of the phase diagram of the polymer‐solvent system. In this work, we executed a similar study on copolymers and interpenetrating polymer networks (IPNs) with controllable hydrophilic/hydrophobic ratios. Copolymers and IPNs were swollen with different amounts of benzene and subjected to cooling and heating scans with differential scanning calorimetry (DSC). Synthesis of the IPNs was carried out in such a way that phase separation appeared, and three qualitatively different types of DSC thermograms were identified depending on the benzene content of IPN. Thermal transitions of benzene in the hydrophilic/hydrophobic copolymers can also be explained as a consequence of the phase diagram of the system, but an increase in the glass‐transition temperature of the system can be correlated with the interactions among the hydrophilic groups of the copolymer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1713–1721, 2003     

Molecular characterization of a hyperbranched polyester. II. Small‐angle neutron scattering

A series of fractions of a hyperbranched polyester in deutero tetrahydrofuran solution were investigated by small‐angle neutron scattering. Concentrations of polymer from 2 to 5% w/v were used, and the molecular parameters were obtained from Zimm plots of the data. Second virial coefficients were positive, and these values were confirmed by dilute‐solution light scattering on a small number of fractions with deutero tetrahydrofuran as a solvent. The small‐angle neutron scattering data exhibited the general features predicted for the particle scattering functions of nonrandomly branched polymers, but an exact fit of the theoretical equation to the data could not be obtained for all fractions of the hyperbranched polymer, particularly those of high molecular weight. Excluded volume effects were cited as a possible cause for this disagreement. A fractal dimension of ～2.5 was obtained from the scattering vector dependence of the differential scattering cross section of the polymer in deutero tetrahydrofuran solution, which agreed with the scaling exponent for the dependence of the radius of gyration on weight‐average molecular weight. Hydrogenous tetrahydrofuran solutions of the hyperbranched polymer exhibited negative second virial coefficients that were attributed to isotopic influences on the thermodynamic properties of the polymer–solvent combination. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1352–1361, 2003     

Responsive and patterned polymer brushes

While polymer brush systems continue to grow in popularity, so does their complexity and sophistication. Advances in polymerization and specific functionalization methods have led to novel applications in diverse research fields. The marriage of top‐down lithography with bottom‐up brush processing is becoming increasingly important in the development and progress of nanotechnology. The aim of this review is to examine different approaches taken to generate tailored polymer brush systems through surface‐initiated polymerizations as well as patterning techniques. Detaching polymer brushes to create free‐standing membranes is also highlighted and discussed in terms of methods and characterization. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1457–1472     

Conductivity,morphology, interfacial chemistry,and stability of poly(3,4‐ethylene dioxythiophene)–poly(styrene sulfonate): A photoelectron spectroscopy study

X‐ray photoelectron spectroscopy (XPS) has been used to characterize poly(3,4‐ethylene dioxythiophene)–poly(styrene sulfonate) (PEDT/PSS), one of the most common electrically conducting organic polymers. A correlation has been established between the composition, morphology, and polymerization mechanism, on the one hand, and the electric conductivity of PEDT/PSS, on the other hand. XPS has been used to identify interfacial reactions occurring at the polymer‐on‐ITO and polymer‐on‐glass interfaces, as well as chemical changes within the polymer blend induced by electrical stress and exposure to ultraviolet light. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2561–2583, 2003     

Prediction and estimation of solvent diffusivities in polyacrylate and polymethacrylates

The relationship between polymer side‐chain length and the hole free volume that is effective for solvent diffusion was investigated for polyacrylates and polymethacrylates on the basis of free‐volume theory. Measurements of a polymer's viscoelasticity and solvent diffusivity provided experimental evidence for polymer segment mobility, and the results indicated that hole free volume in a linear polymer increases with hydrocarbon side‐chain length. Because the molecular mechanisms of polymer viscoelasticity and diffusivity are identical, the free‐volume parameters obtained for polyacrylates and polymethacrylates by measuring the polymer viscoelastic‐temperature dependence can reliably be used in predicting the solvent diffusion coefficient. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1393–1400, 2003     

First synthesis of the bismole‐containing conjugated polymer

We successfully synthesized the first conjugated polymer containing a bismuth atom in the conjugated main chain by incorporating a bismuth atom into the cyclopentadiene framework (bismole), which was constructed by a polymer reaction. A synthetic procedure and characterization of the obtained polymers were discussed. This bismole‐containing conjugated polymer exhibited moderate bluish green photoluminescence in solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4857–4863, 2006     

Synthesis and characterization of a main‐chain‐type conjugated copolymer containing rare earth with photocrosslinkable group

In this article, we report the design, synthesis, and characterization of a new main‐chain‐type rare earth‐containing conjugated polymer with photocrosslinkable group. The polymer is crosslinked photochemically by the addition of a photoinitiator to yield an absolute insoluble network. The optical properties of the resulting conjugated polymer were characterized in solution, film state, and after photocrosslinking. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 388–394, 2007.     

Complete miscibility of ternary aryl polyesters demonstrating a new criterion and horizon for miscibility characterization

A ternary miscible blend system comprising only crystallizable aryl polyesters [poly(ethylene terephthalate), poly(trimethylene terephthalate), and poly(butylene terephthalate)] was characterized with the criteria of thermal analyses, microscopy, and X‐ray characterizations. The reported ternary miscibility (in the quenched amorphous state of blends of the three aryl polyesters) was truly physical and under the condition of no chemical transesterifications; this justified that transesterification was not a necessary condition for miscibility in polyester blends in this case. This study further proposed and tested a novel concept of a new criterion for miscibility characterization for polymer blends of only crystallizable polymers. A single composition‐dependent cold‐crystallization‐temperature (T_cc) peak in blends of only semicrystalline polymers was taken as an indication of an intimate mixing state of miscibility. The theoretical background for establishing the single composition‐dependent T_cc peak as a valid miscibility criterion for crystallizable polymer blends was examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2394–2404, 2003