Tautomerism and the maximum hardness principle

Through the application of the atom–bond electronegativity equalization method (ABEEM) to the calculation of the hardnesses of more than 300 tautomers, it can be seen that the maximum hardness principle is nearly useless to account for their relative stabilities. Moreover, by calculating the energies of these tautomers with the HF, B3LYP, B3PW91, and MP2 methods at the 6‐31G, 6‐31G*, 6‐31G**, 6‐31+G**, 6‐311G**, or 6‐311++G** level, it is found that all these methods may not be always reliable in predicting their relative stabilities. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

An Ab Initio Molecular Orbital Study of Valence Bond Isomers of Silabenzene and Phosphabenzene

Ab initio molecular orbital calculation at HF/6-31G*, HF/6-31G**, HF/6-311G**, HF/6-311++G**, RMP2-FC/6-31G*, and B3LYP/6-31G* levels of theory for geometry optimization and MP4(SDQ)/6-31G* for a single point total energy calculation are reported for silabenzene ( 7 ), phosphabenzene ( 8 ) and 16 valence bond isomers of silabenzene and phosphabenzene ( 9-24 ). The calculated energy difference (19.78 kcal mol m 1 ) between silabenzene and the most stable valence bond isomer of silabenzene (1-silabenzvalene, 9 ) is much smaller than the difference (73.60 kcal mol m 1 ) between benzene and benzvalene ( 2 ). The energy difference between phosphabenzene and the most stable valence bond isomer of phosphabenzene (1-phosphabenzvalene, 17 ) is calculated to be 43.29 kcal mol m 1 .     

A quantum mechanical approach to the kinetics of the hydrogen abstraction reaction H2O2 + •OH → HO2 + H2O

The kinetics of the hydrogen abstraction from H₂O₂ by ^?OH has been modeled with MP2/6‐31G*//MP2/6‐31G*, MP2‐SAC//MP2/6‐31G*, MP2/6‐31+G**//MP2/6‐31+G**, MP2‐SAC// MP2/6‐31+G**, MP4(SDTQ)/6‐311G**//MP2/6‐31G*, CCSD(T)/6‐31G*//CCSD(T)/6‐31G*, CCSD(T)/6‐31G**//CCSD(T)/6‐31G**, CCSD(T)/6‐311++G**//MP2/6‐31G* in the gas phase. MD simulations have been used to generate initial geometries for the stationary points along the potential energy surface for hydrogen abstraction from H₂O₂. The effective fragment potential (EFP) has been used to optimize the relevant structures in solution. Furthermore, the IEFPCM model has been used for the supermolecules generated via MD calculations. IEFPCM/MP2/6‐31G* and IEFPCM/CCSD(T)/6‐31G* calculations have also been performed for structures without explicit water molecules. Experimentally, the rate constant for hydrogen abstraction by ^?OH drops from 1.75 × 10^?12 cm³ molecule^?1 s^?1 in the gas phase to 4.48 × 10^?14 cm³ molecule^?1 s^?1 in solution. The same trend has been reproduced best with MP4 (SDTQ)/6‐311G**//MP2/6‐31G* in the gas phase (0.415 × 10^?12 cm³ molecule^?1 s^?1) and with EFP (UHF/6‐31G*) in solution (3.23 × 10^?14 cm³ molecule^?1 s^?1). © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 502–514, 2005     

Density functional efficiency in the calculations of vibrational frequencies and molecular structures of β-diketones

Density functional theory (DFT) levels are employed to calculate the vibrational frequencies and geometrical data of β-diketones. We evaluate the relative performance of the different levels by comparing theoretical results to experimental values. The applied DFT levels in this work are B3LYP, BLYP, B3P86, B3PW91, BPW91, G96LYP, BP86, and G96PW91 with the standard 6-31G, 6-31G*, 6-31G**, 6-31+G**, 6-31++G**, 6-311G**, 6-311++G** basis sets. The best results are obtained at the B3LYP, B3PW91, and B3P86 levels.     

Rate coefficients of the CF3CHFCF3 + H → CF3CFCF3 + H2 reaction at different temperatures calculated by transition state theory with ab initio and DFT reaction paths

The minimum energy path (MEP) of the reaction, CF₃CHFCF₃ + H → transition state (TS) → CF₃CFCF₃ + H₂, has been computed at different ab initio levels and with density functional theory (DFT) using different functionals. The computed B3LYP/6‐31++G**, BH&HLYP/cc‐pVDZ, BMK/6‐31++G**, M05/6‐31+G**, M05‐2X/6‐31+G**, UMP2/6‐31++G**, PUMP2/6‐31++G**//UMP2/6‐31++G**, RCCSD(T)/aug‐cc‐pVDZ//UMP2/6‐31++G**, RCCSD(T)/aug‐cc‐pVTZ(spd,sp)//UMP2//6‐31++G**, RCCSD(T)/CBS//M05/6‐31+G**, and RCCSD(T)/CBS//UMP2/6‐31++G** MEPs, and associated gradients and Hessians, were used in reaction rate coefficient calculations based on the transition state theory (TST). Reaction rate coefficients were computed between 300 and 1500 K at various levels of TST, which include conventional TST, canonical variational TST (CVT) and improved CVT (ICVT), and with different tunneling corrections, namely, Wigner, zero‐curvature, and small‐curvature (SCT). The computed rate coefficients obtained at different ab initio, DFT and TST levels are compared with experimental values available in the 1000–1200 K temperature range. Based on the rate coefficients computed at the ICVT/SCT level, the highest TST level used in this study, the BH&HLYP functional performs best among all the functionals used, while the RCCSD(T)/CBS//MP2/6‐31++G** level is the best among all the ab initio levels used. Comparing computed reaction rate coefficients obtained at different levels of theory shows that, the computed barrier height has the strongest effect on the computed reaction rate coefficients as expected. Variational effects on the computed rate coefficients are found to be negligibly small. Although tunneling effects are relatively small at high temperatures (～1500 K), SCT corrections are significant at low temperatures (～300 K), and both barrier heights and the magnitudes of the imaginary frequencies affect SCT corrections. © 2012 Wiley Periodicals, Inc.     

Scaling factors for vibrational frequencies and zero-point vibrational energies of some recently developed exchange-correlation functionals

The scaling factors for the vibrational frequencies and zero-point vibrational energies evaluated at various combinations of recently developed exchange-correlation functionals and various basis sets are reported. The exchange-correlation functionals considered are B972, B98, HCTH, OLYP, O3LYP, G96LYP, PBE0 and VSXC functionals; the basis sets employed are 3-21G, 6-31G*, 6-31G**, 6-31+G, 6-311G*, 6-311G**, 6-311G(df,p), 6-311+G(df,p), cc-pVDZ and aug-cc-pVDZ. The experimental harmonic frequencies of 122 small molecules and the zero-point vibrational energies of 39 small molecules are used to determine the scaling factors through the least-square fitting procedure. It was found that the scaling factors do not depend significantly on the basis sets considered. The vibrational frequency scaling factors evaluated by using the B98 and PBE0 functionals are recommended on the basis of smallest root mean square error. The zero-point vibrational energy scaling factors evaluated from the B972 functional with Pople's double-zeta basis set and the HCTH functional with Pople's triple-zeta basis set are recommended on the basis of smallest root mean square error.     

Eclipsed and staggered conformations of (SIH3)2F+: An ab initio study

Ab initio calculations at 6–31G**, 6–31++G**, and MP2/6–31G** levels were performed on disilyl–fluoronium, (SiH₃)₂F⁺, with the SiH₃ group eclipsed or staggered. Optimized geometries, total energies, dipole moments, atomic charges, electronic density, and vibrational frequencies were computed. The results were compared with calculated structural parameters and vibrational frequencies of H₃SiF, H₂SiF⁺, H₂SiF^?, and H₄SiF⁺ ions. The basis-set effects were studied. Several thermochemistry parameters—ZPE, thermal energy, rotational constants, and entropies—were also calculated. © 1994 John Wiley & Sons, Inc.     

Quantum chemical investigation of the structures of ionic liquids based on 1-ethyl-3-methylimidazolium halides: IR spectra and hydrogen bonds

Hydrogen bonds, structures, and vibrational spectra of 1-ethyl-3-methylimidazolium halides ([emim][Hal]) were analyzed in the framework of the Hartree—Fock method (HF/6-31G*, 6-31+G*) and the density functional theory (B3LYP/6-31G*, 6-31+G*, 6-31G**, 6-31+G**). It is shown that the use of the approximation of an isolated ion pair cation—anion is incorrect for the ionic liquids studied. It is more reasonable to consider “clusters” including at least two-three cations and being more appropriate models for the study of hydrogen bonds and vibrational spectra of ionic liquids of this type.     

Quantum-mechanical calculations of the structure and vibrational spectra of CH<Subscript>3−<Emphasis Type="Italic">n</Emphasis></Subscript>Cl<Subscript>n</Subscript>SiF<Subscript>3</Subscript> (<Emphasis Type="Italic">n</Emphasis> = 0–3) substituted methylsilanes

Quantum-mechanical calculations of the optimized structures, barriers to internal rotation about the Si-C bond, harmonic force fields, and vibrational frequencies of CCH₃SiF₃, CH₂ClSiF₃, CHCl₂SiF₃, and CCl₃SiF₃ were performed using the Hartree-Fock approximation and density functional theory at the MP2/6-31G*, B3LYP/6-31G*, B3LYP/6-311++G**, B3LYP/aug-cc-pVDZ, and B3LYP/aug-cc-pVTZ levels. A new interpretation of the infrared absorption and Raman spectra of the compounds was suggested on the basis of the theoretical results     

An Ab Initio Molecular Orbital Study of Isophosphinines

Ab initio molecular orbital calculation at HF/6-31G*, HF/6-31G**, HF/6-311G**, HF/6-311++G**, RMP2-FC/6-31G*, and B3LYP/6-31G* levels of theory for geometry optimization and MP4(SDQ)/6-31G* for a single-point total energy calculation are reported for phosphinine and 13 isophosphinines 7-19 . Isomers 7-11 with an allenic system are calculated to be 8-18 kcal mol m 1 more stable than structures 12-17 with an acetylenic moiety. The calculated energy difference (66.19 kcal mol m 1 ) between phosphinine and the most stable isophosphinine (1-phospha-1,2,4-cyclohexatriene, 10 ) is smaller than the difference (78.96 kcal mol m 1 ) between benzene and the most stable isobenzene (cyclohexa-1,2,4-triene, 2 ). The isophosphinines 18 and 19 , with a butatriene moiety, are calculated to be the least stable isomers.     

A comparative study on the nature and strength of O–O, S–S, and Se–Se bond

A computational study on dichalcogenide molecules (R₂X₂; X = O, S, Se; R = H, CH₃, NH₂) has been carried out employing B3LYP and MP2 levels using 6-31+G*, 6-311+G*, 6-311++G**, and PVDZ basis sets. The relative energies have been evaluated at G2MP2 also. The rotational barriers and bond dissociation energies indicate that S–S bond is stronger than Se–Se and O–O bond. NBO analysis at MP2/6-31+G* suggest the presence of partial π character between X–X bond that decreases in the order S–S > Se–Se > O–O. Fuki functions for nucleophilic and electrophilic attack fail to distinguish the reactivity of S and Se. The proton affinities of the O₂H₂, S₂H₂, Se₂H₂ decrease in the order Se > S > O.     

A computational study of intramolecular proton transfer in gaseous protonated glycine

The minimum energy paths for intramolecular proton transfer between the amino nitrogen and carbonyl oxygen atoms in gaseous protonated glycine were estimated at the Hartree-Fock (HF) and second-order M?ller-Plesset Perturbation (MP2) levels of theory. Potential energy profiles and their associated reactant, transition state, and product species calculated at the MP2/6-31G* level were shown to differ significantly from those obtained at the HF/6-31G* level. Effects of electron correlation and basis functions on the calculated geometries and energies of relevant species were examined at the HF, MP2, MP4, CCSD, and B3LYP levels using the 6-31G*, 6-31G**, 6-31+G**, 6-311+G**, 6-31+G(2d,2p), 6-311+G(3df,2p), cc-pVDZ, aug-cc-pVDZ, and cc-pVTZ basis sets. The HF and MP2 optimized levels with the 6-31G*, 6-31G**, 6-31+G**, and 6-311+G** bases were used to calculate the thermodynamic and kinetic properties of the proton transfer reaction at 298.15 K and 1 atm, which include enthalpy, entropy, Gibbs free energy, equilibrium constant, potential energy barriers, tunneling transmission coefficients, and rate constants. Results indicate that the proton in a carbonyl O-protonated glycine undergoes a rapid migration to the amino nitrogen atom, while the reverse process is extremely unfavorable. The objective of this work is to develop practical theoretical procedures for studying proton transfer reactions in amino acids and peptides and to assemble physical data from these model calculations for future references.     

Calculation of the electrostatic charges and energies for intercalation of aromatic drug molecules with DNA

In this work, we analyzed the influence of the charge model on the magnitudes of atomic charges and electrostatic energies for the binding of aromatic drug molecules with DNA. The dependence of the charge and energy on the level of theory (HF, DFT (B3LYP), MP2, semi‐empirical methods), basis set (STO‐3G, 3‐21G, 6‐31G, 6‐31G*, 6‐31G**), method of charge computation (Mulliken, Natural Population Analysis, CHelpG, Merz–Kollman), and force field charge (CHARMM27, AMBER99) has been tracked for typical aromatic drugs of different structure and charge state. Recommendations and restrictions have been formulated for the use of particular approaches in charge/electrostatic energy calculations. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Comparative theoretical study of transition structures,barrier heights,and reaction energies for the intramolecular tautomerization in acetaldehyde/vinyl alcohol and acetaldimine/vinylamine systems

The transition structures associated with the possible intramolecular tautomerization for acetaldehyde/vinyl alcohol and acetaldimine/vinylamine systems as models of keto/enol and imine/enamine interconversion processes, respectively, were characterized. The relative stabilities of the tautomers and the associated barrier heights were calculated. Ab initio analytical gradients and second derivatives at the HF level of theory and 3-21G, 6-31G, 6-31G**, 6-31++G**, and 6-311++G** basis-set, DFT (BP86/6-311++G** and BLYP/6-311++G**), and semiempirical (AM1 and PM3) procedures were used to identify the stationary points. Correlation effects were estimated using the perturbational approach at MP2/6-31G**, MP2/6-311++G**, and MP2/6-311++G (3df,2p) levels. The geometry, electronic structure, harmonic vibrational frequencies, and transition vector associated with the transition structures as well as the relative stabilities of different isomers and barrier heights were analyzed. The dependence of these properties upon theoretical methods is analyzed and discussed. The transition structures are four-membered rings and the corresponding transition vectors are associated to collective fluctuations. The 1,3 intramolecular hydrogen migration is much more advanced than are the hybridization changes on donor and acceptor centers at the transition structure. The corresponding barrier heights can be related to the change of bond orders and acid/base properties of these centers. A comparison of the results obtained with different methods renders that the nature of the transition structure seems to be a rather robust entity. © 1998 John Wiley & Sons, Inc. Int J Quant Chem 66 : 9–24, 1998     

Monomolecular decay of anion-radicals of isomeric chlorobenzonitriles. Quantum chemical analysis

Regularities for the reaction courses of the monomolecular decay of anion-radicals (AR) of isomeric chlorobenzonitriles have been considered basing on the ab initio investigation by ROHF/6-31+G*, MP2/6-31+G*//ROHF/6-31+G*, and B3LYP/6-31+G* methods. Stable structures corresponding to initial AR, final products of the decay, and combining them transition states (TS) of the reaction were localized. The TS found have a substantially non-planar structure. The main factor determining a relative ability of isomeric AR to remove chloride anion is the difference in the density of the unpaired electron on the breaking bond in the initial AR. In the case of para-isomer, whose SOMO is maximally localized on the C atom bonded to Cl, it is likely to expect “ early” TS and low barriers of the reaction both in the gas phase and polar solvents. The fragmentation of ortho-and meta-isomers is forestalled by remarkable structural modifications resulting in the redistribution of electron density with its localization on the breaking bond C—Cl.     

硝酸甲与硝酸乙酯的结构、振动频率和热力学性质的密度函数 理论(DFT)研究

用密度函数理论(DFT)的BLYP和B3LYP方法,取6-31G,6-31G^*,6-31G^*^*,6-311G,6-311G^*和6-311G^*^*六种基组,对硝酸甲酯和硝酸乙酯的几何构型和红外振动频率进行了计算研究.结果表明,B3LYP方法在采用极化基组(6-31G^*,6-31G^*^*,6-311G^*和6-311G^*^*)时计算得到的结果均较好,适用于硝酸酯类化合物的研究.而BLYP方法无论采用何种基组均不适用;运用校正后的B3LYP/6-31G^*频率(校正因子0.975)计算得到的热力学性质(C^o~p,H^o和S^o)与实验结果较吻合。     

Factors Inhibiting the Alkyl-Branch Plasticization of Polyoxymethylene

The ability of an alkyl branch to depress the melting temperature in a polyoxymethylene chain is measurably less than that in a polyethylene chain. The factors that inhibit the alkyl-branch plasticization of polyoxymethylene are considered by computational assessment of a series of model compounds at various levels of theory: DFT B3LYP 6-31+G*, DFT B3LYP 6-311++G**, MP2 cc-pVTZ, T1, and G3(MP2). Intramolecular interactions—characterized as acetal CH···O hydrogen bonds—are surprisingly strong and likely encourage conformational regularity in the vicinity of the alkyl branches, allowing maintenance of the intermolecular chain-chain interactions. The acetal CH···O hydrogen bonds in dimethylene glycol average to 2.65 kcal/mol while the non-acetal CH···O interactions in 1,3-propanediol are much weaker with an average of 0.34 kcal/mol (G3(MP2)). The related, classical OH···O hydrogen bond in ethylene glycol is found to be worth 2.12 kcal/mol. To describe this energetic ordering, an additional stabilizing anomeric effect is invoked for dimethylene glycol, a model for polyoxymethylene.     

Importance of CH/π hydrogen bonds in recognition of the core motif in proline-recognition domains: an ab initio fragment molecular orbital study

We examined CH/π hydrogen bonds in protein/ligand complexes involving at least one proline residue using the ab initio fragment molecular orbital (FMO) method and the program CHPI. FMO calculations were carried out at the Hartree–Fock (HF)/6‐31G*, HF/6‐31G**, second‐order Møller–Plesset perturbation (MP2)/6‐31G*, and MP2/6‐31G** levels for three Src homology 3 (SH3) domains and five proline‐recognition domains (PRDs) complexed with their corresponding ligand peptides. PRDs use a conserved set of aromatic residues to recognize proline‐rich sequences of specific ligands. Many CH/π hydrogen bonds were identified in these complexes. CH/π hydrogen bonds occurred, in particular, in the central part of the proline‐rich motifs. Our results suggest that CH/π hydrogen bonds are important in the recognition of SH3 and PRDs by their ligand peptides and play a vital role in the signal transduction system. Combined use of the FMO method and CHPI analysis is a valuable tool for the study of protein/protein and protein/ligand interactions and may be useful in rational drug design. © 2011 Wiley Periodicals, Inc. J Comput Chem 2011     

Selection of a quantum-chemical method and basis set for optimization of the complex ion Cu(H2O)+

Calculations of the open-shell van der Waals complex Cu(H₂O)⁺ were carried out at 15 theoretical levels basing on the DFT theory in its variants B3LYP and BLYP. Five types of basis function were used (3-21G*, 3-21G**, 6-31G(d,p), 6-311G(d,p) and CEP-4G) each combined with one (+) or two (++) diffuse functions. The aim of the research was to find out the most accurate combination of method and basis set which predicts structural, energetic and vibration parameters closest to the experimentally found ones. Several experimental parameters were used as reference values.     

Electronic, optical, and charge transfer properties of donor–bridge–acceptor hydrazone sensitizers

The ground state geometries have been computed by using density functional theory (DFT) at B3LYP/6-31G*, B3LYP/6-31G**, and PCM-B3LYP/6-31G* level of theories. The highest occupied molecular orbitals (HOMOs) are delocalized on whole of the molecule and the lowest unoccupied molecular orbitals (LUMOs) are localized on the tricarbonitrile. The lowest HOMO and LUMO energies have been observed for Dye1 while highest for Dye4. The LUMO energies of Dye1–Dye4 are above the conduction band of TiO₂ and HOMOs are below the redox couple. The absorption spectra have been computed in solvent (methanol) and without solvent by using time-dependant DFT at TD-B3LYP/6-31G*, TD-B3LYP/6-31G**, and PCM-TD-B3LYP/6-31G* level of theories. The calculated maximum absorption wavelengths of the spectra in methanol are in good agreement with experimental evidences. The maximum absorption wavelengths of new designed sensitizers are red shifted compared to parent molecule. The electronic coupling constant and electron injection have been computed by first principle investigations. The improved electronic coupling constant and electron injection revealed that new modeled systems would be efficient sensitizers.