Reactions of Rhenium and Technetium Nitrido Complexes with ER3 Fragments (E = B,Ga, Al,C, P; R = H,Alkyl, Aryl)

Terminal ‘N^3—’ ligands in rhenium and technetium nitrido complexes are sufficiently nucleophilic to react with Lewis acids under formation of nitrido‐bridged compounds. The reactivity of the nucleophilic centre and the nature of the formed compounds are strongly dependent on the Lewis acid and the composition of the metal complex used. Air‐stable compounds with Re≡N‐ER₃ bridges are formed when ER₃ is BR₃ (R = H, Cl, Br, Ethyl, Phenyl, C₆F₅), BCl₂Ph, GaCl₃, CPh₃⁺, or PPh₃. The six‐co‐ordinate rhenium(V) complexes [ReNX₂(PMe₂Ph)₃] (X = Cl, Br), [ReN(X)(Et₂dtc)(PMe₂Ph)₂] (Et₂dtc^— = diethyldithiocarbamate) and [ReN(Et₂dtc)₂(PMe₂Ph)] have been proved to be excellent starting materials for this type of reactions, whereas the five‐co‐ordinate precursors [ReNCl₂(PPh₃)₂], [ReN(Et₂dtc)₂], [ReN{Ph₂P(S)NP(S)Ph₂}₂] or [ReNCl₄]^— only react with the most reactive Lewis bases of the examples mentioned above such as BCl₂Ph or B(C₆F₅)₃. The rhenium‐nitrido bond lengths remain almost unchanged by the adduct formation, whereas a significant decrease of the trans‐influence of the nitrido complexes has been observed as can be seen by a shortening of the corresponding bond lengths or dimerization of five‐co‐ordinate precursors. Electrophilic attack of the Lewis acid to a donor atom of the equatorial co‐ordination sphere of the rhenium complex results in the formation of ‘underco‐ordinate’ metal centres which resemble to di‐, tri or tetrameric units with asymmetric nitrido bridges between each two rhenium atoms. EPR spectroscopy is an excellent tool to reflect the formation of nitrido bridges at the paramagnetic (d¹) [ReNX₄]^— core (X = F, Cl, Br, NCS). The spectral parameters derived for the products of reactions of [ReNCl₄]^— with various boron compounds indicate an increase of the covalency of the equatorial Re‐L bonds as a consequence of the formation of a nitrido bridge. The tendency for the formation of nitrido bridges with Lewis acids is significantly lower for technetium compounds compared to their rhenium analogues. Only a few examples with BH₃ and BPhCl₂ have been established.     

Nitridorhenium(V)‐Komplexe mit Dimercaptobernsteinsäuredimethylester. Präparation,Charakterisierung und Kristallstruktur von [Re{NC(CH3)2PPhMe2}(DMSMe2)2]

Nitridorhenium(V) Complexes with Dimercapto Succinic Acid Dimethylester. Preparation, Characterization, and Crystal Structure of [Re{NC(CH₃)₂PPhMe₂}(DMSMe₂)₂] Reaction of [ReNCl₂(Me₂PhP)₃] 1 with two equivalents of dimercaptosuccinic acid dimethylester (DMSMe₂) results in the formation of a neutral, diamagnetic rhenium(V)‐DMSMe₂ complex with a phenyldimethylphosphinoisopropyl group at the nitrido ligand as a consequence of a nucleophilic attack of the coordinated nitrido ligand on the solvent molecule. The formed complex 2 of the composition [Re{NC(CH₃)₂(Me₂PhP)}(DMSMe₂)₂] crystallizes in the triclinic space group P 1, a = 12.334(7), b = 12.412(7), c = 12.414(8) Å; α = 60.14(3)°, β = 67.98(3)°, γ = 80.63(6)°; Z = 2. Rhenium is located in a square‐pyramidal configuration of the donor atoms. The two meso‐DMSMe₂ ligands are in a syn‐endo conformation. The rhenium‐nitrogen bond (1.697(12) Å) is only slightly longer than typical Re–N bonding distances in nitrido complexes and comparable with other Re–N–C bonding distances. The addition of a solvent molecule is observed in acetone ( 2 ) as well as in methylethylketone ( 3 ). Moreover, a reaction of the nitrido group with the condensation product of ketone is found by mass spectrometry ([ReN{C(CH₃)(C₂H₅)CH₂C(O)C₂H₅(Me₂PhP)}(DMSMe₂)₂] 4 ).     

Cation‐Mediated Conversion of the State of Charge in Uranium Arene Inverted‐Sandwich Complexes

Two new arene inverted‐sandwich complexes of uranium supported by siloxide ancillary ligands [K{U(OSi(OtBu)₃)₃}₂(μ‐η⁶:η⁶‐C₇H₈)] ( 3 ) and [K₂{U(OSi(OtBu)₃)₃}₂(μ‐η⁶:η⁶‐C₇H₈)] ( 4 ) were synthesized by the reduction of the parent arene‐bridged complex [{U(OSi(OtBu)₃)₃}₂(μ‐η⁶:η⁶‐C₇H₈)] ( 2 ) with stoichiometric amounts of KC₈ yielding a rare family of inverted‐sandwich complexes in three states of charge. The structural data and computational studies of the electronic structure are in agreement with the presence of high‐valent uranium centers bridged by a reduced tetra‐anionic toluene with the best formulation being U^V–(arene^4?)–U^V, KU^IV–(arene^4?)–U^V, and K₂U^IV–(arene^4?)–U^IV for complexes 2 , 3 , and 4 respectively. The potassium cations in complexes 3 and 4 are coordinated to the siloxide ligands both in the solid state and in solution. The addition of KOTf (OTf=triflate) to the neutral compound 2 promotes its disproportionation to yield complexes 3 and 4 (depending on the stoichiometry) and the U^IV mononuclear complex [U(OSi(OtBu)₃)₃(OTf)(thf)₂] ( 5 ). This unprecedented reactivity demonstrates the key role of potassium for the stability of these complexes.     

Synthesis,structures and magnetic properties of a series of polynuclear copper(II)‐lanthanide( III) complexes assembled with carboxylate and hydroxide ligands

Heterometallic copper(II)‐lanthanide(III) complexes have been made with a variety of exclusively O‐donor ligands including betaines (zwitterionic carboxylates) and chloroacetate, which are dinuclear CuLn, tetranuclear Cu₂Ln₂, pentanuclear C_u3Ln₂, and octadecanuclear C_u12 complexes. The results show that subtle changes in both the carboxylates and acidity of the reaction solution can cause drastic changes in the structures of the products. Magnetic studies exhibit that shielding of the Ln³⁺ 4f electrons by the outer shell electrons is very effective to preclude significant coupling interaction between the Ln³⁺ 4f electrons and Cu²⁺ 3d electrons in either a mono‐atomic hydroxide‐bridged, or a carboxylate‐bridged system.     

Experimental and computational studies on a new mixed ligand oxido–rhenium(V) compound

A mixed ligand oxido–rhenium(V) complex, [ReOS₃(HL)]Cl.H₂O ( 1p Cl.H₂O), with 3‐thiopentane‐1,5‐dithiolato (S₃) as a tridentate ligand and imidazolidinethione (HL) as an ancillary monodentate sulfur donor co‐ligand, has been synthesized. 1p Cl.H₂O has been characterized by spectral analyses. The X‐ray crystal structure of 1p Cl.H₂O shows that the complex contains a distorted square‐pyramidal “ReOS₄” core. The structural parameters agree with our optimized structure of 1p ⁺. Subsequently, the optimized structure was used to calculate systematically the relative stabilities of a sequence of oxido–Re(V) and the analogous oxido–Tc(V) complexes just by varying the donor sites (N, S, and O) on the tridentate ligand moiety in 1p ⁺. Electrochemical studies on 1p Cl.H₂O show an oxidative rhenium(VI)/ rhenium(V) couple at 1.561 V versus Ag/AgCl under controlled linear diffusion situation. Vibrational frequencies, electronic structures, and redox potential of 1p ⁺ have been calculated theoretically employing density functional theory (DFT) or time‐dependent‐DFT methods. The experimental findings are in excellent agreement with the computed results. The calculated redox potentials of the investigated oxido–Re(V) complexes and their oxido–Tc(V) counterparts are shown to correlate linearly with their respective chemical potential values.     

Reactions of [ReN(Cl)(Me2PhP)2(HEt2tcb)] with Lewis Acids. Synthesis,Characterization and Structures of [Re(NBBr3)Br2(Me2PhP)3], [Re(NGaCl3)Cl(Me2PhP)2(H2Et2tcb)][GaCl4] and [Re{NB(C6F5)3}Cl(Me2PhP)2(HEt2tcb)] (H2Et2tcb=N,N-diethylthiocarbamoylbenzamidine)

Reactions of [ReN(Cl)(Me₂PhP)₂(HEt₂tcb)] (HEt₂tcb⁻=N,N-diethylthiocarbamoylbenzamidinate, Me₂PhP=dimethylphenylphosphine) with Lewis acidic compounds such as BBr₃, (C₆F₅)₃B or gallium(III) chloride yield nitrogen-bridged binuclear complexes with covalent bonds between the nitrido ligand and boron or gallium. The reactions go along with activation of the transition metal centre which can lead to ligand re-arrangements and reactions with solvent molecules.The reaction with BBr₃ results in cleavage of the bonds to the chelating ligand. [Re(NBBr₃)Br₂(Me₂PhP)₃] was isolated as the only product with a nitrido bridge. The bis-chelate [ReN(HEt₂tcb)₂] was formed as a side-product.Upon formation of a nitrido bridge to GaCl₃ the first co-ordination sphere of rhenium is retained. The co-ordinated thiocarbamoylbenzamidinate, however, undergoes protonation and is bonded as a neutral, bidentate ligand in the product [Re(NGaCl₃)Cl(Me₂PhP)₂(H₂Et₂tcb)][GaCl₄].In [Re{NB(C₆F₅)₃}Cl(Me₂PhP)₂(HEt₂tcb)], which can be obtained in good yield from the reaction of [ReN(Cl)(Me₂PhP)₂(HEt₂tcb)] with (C₆F₅)₃B, the co-ordination environment of the metal remains essentially unchanged.X-ray structural studies on the products suggest that the strong structural trans influence of the terminal nitrido ligand in the starting complex decreases significantly as a consequence of the formation of the N–B/Ga bonds. The rhenium–nitrogen multiple bond distances, however, remain almost unchanged.     

Synthesis,Crystal Structure,and Properties of a Binuclear Copper(II) Complex Containing an Oxalate Bridge

The complex [Cu₂(L)₂(μ₂‐C₂O₄)]·CH₃OH ( 1 ) has been synthesized and characterized by IR, UV, ESR and variable temperature magnetic susceptibility measurement, where L = 1‐(ethylamino)‐2‐(salicylideneamino)ethane. The crystal X‐ray diffraction reveals that complex 1 has a μ₂‐C₂O₄^2— bridge. The complex exhibits ferromagnetic couplings between the copper atoms bridged by oxalate dianion, which is rare in oxalato‐bridged copper complexes.     

Platinum(II) complexes containing hydrazide‐based aminophosphine ligands: Synthesis,molecular structures,computational investigation and evaluation as antitumour agents

Four new N,N‐bis(diphenylphosphino)amine ligands (where amine = 1‐amino‐4‐methylpiperazine (L₁), N‐aminophthalimide (L₂), 4‐aminomorpholine (L₃) and hydrazine dihydrochloride (L₄)) and their Pt(II) complexes C₁, C₂, C₃ and C₄ were synthesized and characterized using infrared and NMR spectroscopies. The crystal structures of C₁, C₂ and C₃ were determined using single‐crystal X‐ray diffraction techniques. The antitumour activities of the synthesized complexes determined using MTT assay on MDA‐MB‐231 cell line revealed that the studied complexes, especially C₂, significantly suppressed the proliferation of these cancer cells in a dose‐ and time‐dependent manner (e.g. at a complex concentration of 100 μg ml^?1, in 24 h, the reduction of the cell viability was 88.00, 38.89, 83.35 and 64.28% for C₁–C₄, respectively). Theoretical approaches were also used to investigate the energy and the nature of metal–ligand and metal–chlorine interactions in the complexes, which could explain their biological activities. Results demonstrated that the interaction between ligand and Pt is stronger in C₂, while the Pt–Cl interaction is weaker in this complex in comparison with the other complexes.     

Ansa‐Complexes of [Mn(η5‐C5H5)(η6‐C6H6)]: Preparation,Characterization, and Reactivity of [n]Manganoarenophanes (n=1, 2, 3)

We report the synthesis of [n]manganoarenophanes (n=1, 2) featuring boron, silicon, germanium, and tin as ansa‐bridging elements. Their preparation was achieved by salt‐elimination reactions of the dilithiated precursor [Mn(η⁵‐C₅H₄Li)(η⁶‐C₆H₅Li)]?pmdta (pmdta=N,N,N′,N′,N′′‐pentamethyldiethylenetriamine) with corresponding element dichlorides. Besides characterization by multinuclear NMR spectroscopy and elemental analysis, the identity of two single‐atom‐bridged derivatives, [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] and [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SiPh₂], could also be determined by X‐ray structural analysis. We investigated for the first time the reactivity of these ansa‐cyclopentadienyl–benzene manganese compounds. The reaction of the distannyl‐bridged complex [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)Sn₂tBu₄] with elemental sulfur was shown to proceed through the expected oxidative addition of the Sn?Sn bond to give a triatomic ansa‐bridge. The investigation of the ring‐opening polymerization (ROP) capability of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] with [Pt(PEt₃)₃] showed that an unexpected, unselective insertion into the C_ipso?Sn bonds of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] had occurred.     

Reactions of the Complexes ReNCl2(PMe2Ph)3, [ReNCl4]—, [OsO3N]—, and Cl3VNCl with Metal Halides

The nitrido complexes ReNCl₂(PMe₂Ph)₃ and [OsO₃N]^— have strong basic terminal nitrido ligands which can react with Lewis acidic metal halides to form nitrido bridges. The synthesis and structure of complexes with ReNCl₂(PMe₂Ph)₃ and nitrido bridges Re≡N‐M (M = B, Ga, Sn, Ti, Zr, V, Nb, Ta, Mo, Re, Pd, Au, and Zn) as well as of complexes with [OsO₃N]^— and nitrido bridges Os≡N‐M (M = Pd and Pt) are reported. Strong Lewis acids can also remove phosphine or chloro ligands from ReNCl₂(PMe₂Ph)₃. The resulting complex fragments subsequently combine to yield oligomeric complexes with nitrido bridges Re≡N‐Re. If the reaction with strong Lewis acids is carried out in a chlorinated solvent the solvent can be decomposed to form HCl which then protonates the nitrido ligand affording an imido complex. [ReNCl₄]^— is able to form nitrido bridges to electrophilic halides if a donor ligand is coordinated in trans position to the nitrido ligand to enhance its basicity sufficiently. The synthesis and structure of examples with nitrido bridges Re≡N‐M (M = Pd, Pt, Ta) are reported. The chloro imido complex Cl₃V≡N‐Cl can act as a nitride ion transfer reagent. Its reaction with MoCl₅ yields Mo₂NCl₈ whereas with MoCl₃ the nitride chlorides Mo₃N₂Cl₁₁ and MoNCl₃ are obtained. Cl₃VNCl can also act as an reactive intermediate by the reaction of VN with a halide as was shown by the reaction of MoCl₅ with VN yielding Mo₂NCl₇. The structures of these molybdenum nitride chlorides are discussed.     

Phosphine (oxide)‐(thio) phenolate palladium complexes: Synthesis,characterization and (co)polymerization of norbornene

A series of palladium complexes ( 2a–2g ) ( 2a : [6‐^tBu‐2‐PPh₂‐C₆H₃O]PdMe(Py); 2b : [6‐C₆F₅–2‐PPh₂‐C₆H₃O]PdMe(Py); 2c : [6‐^tBu‐2‐PPh^tBu‐C₆H₃O]PdMe(Py); 2d : [2‐PPh^tBu‐C₆H₄O] PdMe(Py); 2e : [6‐SiMe₃–2‐PPh₂‐C₆H₃O]PdMe(Py); 2f : [2‐^tBu‐6‐(Ph₂P=O)‐C₆H₃O]PdMe(Py); 2g : [6‐SiMe₃–2‐(Ph₂P=O)‐C₆H₃S]PdMe(Py)) bearing phosphine (oxide)‐(thio) phenolate ligand have been efficiently synthesized and characterized. The solid‐state structures of complexes 2d , 2f and 2g have been further confirmed by single‐crystal X‐ray diffraction, which revealed a square‐planar geometry of palladium center. In the presence of B(C₆F₅)₃, these complexes can be used as catalysts to polymerize norbornene (NB) with relatively high yields, producing vinyl‐addition polymers. Interestingly, 2a /B(C₆F₅)₃ system catalyzed the polymerization of NB in living polymerization manner at high temperature (polydispersity index 1.07, M_n up to 1.5 × 10⁴). The co‐polymerization of NB and polar monomers was also studied using catalysts 2a and 2f . All the obtained co‐polymers could dissolve in common solvent.     

Strongly Phosphorescent Neutral Rhenium(I) Isocyanoborato Complexes: Synthesis,Characterization, and Photophysical,Electrochemical, and Computational Studies

A new series of neutral isocyanoborato rhenium(I) diimine complexes [Re(CO)₃(N^N)(CNBR₃)], where N^N=bpy, 4,4′‐Me₂bpy, phen, 4,7‐Me₂phen, 2,9‐Me₂phen, 3,4,7,8‐Me₄phen; R=C₆F₅, C₆H₅, Cl, 4‐ClC₆H₄, 3,5‐(CF₃)₂C₆H₃, with various isocyanoborate and diimine ligands of diverse electronic and steric nature have been synthesized and characterized. The X‐ray crystal structures of six complexes have also been determined. These complexes displayed intense bluish green to yellow phosphorescence at room temperature in dichloromethane solution. The photophysical and electrochemical properties of these complexes had been investigated. To elucidate the electronic structures and transitions of these complexes, DFT and TD‐DFT calculations have been performed, which revealed that the lowest‐energy electronic transition associated with these complexes originates from a mixture of MLCT [dπ(Re)→π*(N^N)] and LLCT [π(CNBR₃)→π*(N^N)] transitions.     

Mono‐ and dinuclear CuII complexes of the benzyldipicolylamine (BDPA) ligand: crystal structure,synthesis and characterization

The crystal structures of mono‐ and dinuclear Cu^II trifluoromethanesulfonate (triflate) complexes with benzyldipicolylamine (BDPA) are described. From equimolar amounts of Cu(triflate)₂ and BDPA, a water‐bound Cu^II mononuclear complex, aqua(benzyldipicolylamine‐κ³N ,N′ ,N ′′)bis(trifluoromethanesulfonato‐κO )copper(II) tetrahydrofuran monosolvate, [Cu(CF₃SO₃)₂(C₁₉H₁₉N₃)(H₂O)]·C₄H₈O, (I), and a triflate‐bridged Cu^II dinuclear complex, bis(μ‐trifluoromethanesulfonato‐κ²O :O ′)bis[(benzyldipicolylamine‐κ³N ,N′ ,N ′′)(trifluoromethanesulfonato‐κO )copper(II)], [Cu₂(CF₃SO₃)₄(C₁₉H₁₉N₃)₂], were synthesized. The presence of residual moisture in the reaction medium afforded water‐bound complex (I), whereas dinuclear complex (II) was synthesized from an anhydrous reaction medium. Single‐crystal X‐ray structure analysis reveals that the Cu^II centres adopt slightly distorted octahedral geometries in both complexes. The metal‐bound water molecule in (I) is involved in intermolecular O—H…O hydrogen bonds with triflate ligands and tetrahydrofuran solvent molecules. In (II), weak intermolecular C—H…F(triflate) and C—H…O(triflate) hydrogen bonds stabilize the crystal lattice. Complexes (I) and (II) were also characterized fully using FT–IR and UV–Vis spectroscopy, cyclic voltammetry and elemental analysis.     

[1,3‐Bis(di­phenyl­phosphino)prop­ane]­tri­chloro­oxorhenium(V)

Tri­chloro­oxo­[1,3‐prop­ane­diyl­bis­(di­phenyl­phosphine)‐P,P′]rhen­ium(V), [Re­Cl₃­O­(C₂₇­H₂₆P₂)], crystallizes with four formula units per unit cell. The crystal structure consists of neutral complexes of [ReOCl₃(dppp)] [dppp is 1,3‐bis(diphenylphosphino)propane] packed by H?π‐ring interactions. The Re atom is octahedrally coordinated to the oxo anion, three Cl atoms and two P atoms from the dppp ligand. The six‐membered ring formed by the bidentate dppp ligand and the rhenium metal centre is in a chair conformation. The title compound is an intermediate in the synthesis of bis(dppp) complexes of rhenium.     

Synthesis,Structures, and Photophysics of Polynuclear Silver(I) Thiolate and Silver(I) Thiocarboxylate Complexes with Dppm Ligands

Trinuclear silver(I) thiolate and silver(I) thiocarboxylate complexes [Ag₃(μ‐dppm)₃(μ_n‐SR)₂](ClO₄) [n = 2, R = C₆H₄Cl‐4 ( 1 ) and C{O}Ph ( 2 ); n = 3, R = tBu ( 3 )], pentanuclear silver(I) thiolate complex [Ag₅(μ‐dppm)₄(μ₃‐SC₆H₄NO₂‐4)₄](PF₆) ( 4 ), and hexanuclear silver(I) thiolate complexes [Ag₆(μ‐dppm)₄(μ₃‐SR)₄]Y₂ [Y = ClO₄, R =C₆H₄CH₃‐4 ( 5 ) and C₁₀H₇ (2‐naphthyl) ( 7 ); Y = PF₆, R = C₆H₄OCH₃‐4( 6 )], were synthesized [dppm = bis(diphenylphosphanyl)methane] and their crystal structures as well as photophysical properties were studied. In the solid state at 77 K, trinuclear silver(I) thiolate and silver(I) thiocarboxylate complexes 1 and 2 exhibit luminescence at 470–523 nm, tentatively attributed to originate from the ³IL (intraligand) of thiolate or thiocarboxylate ligands, whereas hexanuclaer silver(I) thiolate complexes 5 and 7 produce dual emission, in which high‐energy emission is tentatively attributed to come from the ³IL of thiolate ligands and low‐energy emission is tentatively assigned to come from the admixture of metal ··· metal bond‐to‐ligand charge‐transfer (MMLCT) and metal‐centered (MC) excited states.     

Synthesis,structural characterization,and ethylene polymerization behavior of (arylimido)vanadium(V) complexes bearing tridentate Schiff base ligands

A series of novel (arylimido)vanadium(V) complexes bearing tridentate salicylaldiminato chelating ligands, V(N‐2,6‐Me₂C₆H₃)Cl₂[(O‐2‐^tBu‐4‐R‐C₆H₃)CH?ND] (R = H, D = 2‐CH₃O? C₆H₄ ( 2a ); 2‐CH₃S? C₆H₄ ( 2b ); 2‐Ph₂P? C₆H₄ ( 2c ); 8‐C₉H₆N (quinoline) ( 2d ); CH₂C₅H₄N ( 2e ); R = ^tBu, D = 2‐Ph₂P? C₆H₄ ( 2f )), were prepared from V(NAr)Cl₃ by reacting with 1.0 equiv of the ligands in the presence of triethylamine in tetrahydrofuran. These complexes were characterized by ¹H, ¹³C, ³¹P, and ⁵¹V NMR spectra and elemental analysis. The structures of 2c and 2f were further confirmed by X‐ray crystallographic analysis. These (arylimido)vanadium(V) complexes are effective catalyst precursors for ethylene polymerization in the presence of Et₂AlCl as a cocatalyst and ethyl trichloroacetate as a reactivating agent. Complex 2c with a ? PPh₂ group in the sidearm was found to exhibit an exceptional activity up to 133800 kg polyethylene/mol_V h for ethylene polymerization at 75 °C, which is one of the highest activities displayed by homogeneous vanadium(V) catalysts at high temperature. Moreover, high molecular weight polymers with unimodal molecular weight distribution can be obtained, indicating the single site behavior of these catalysts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2633‐2642     

Ansa‐Bridged Bis(benzene) Titanium Complexes

Taking advantage of an improved synthesis of [Ti(η⁶‐C₆H₆)₂], we report here the first examples of ansa‐bridged bis(benzene) titanium complexes. Deprotonation of [Ti(η⁶‐C₆H₆)₂] with nBuLi in the presence of N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (pmdta) leads to the corresponding 1,1′‐dilithio salt [Ti(η⁶‐C₆H₅Li)₂] ? pmdta that enables the preparation of the first one‐ and two‐atom‐bridged complexes by simple salt metathesis. The ansa complexes were fully characterized (NMR spectroscopy, UV/Vis spectroscopy, elemental analysis, and X‐ray crystallography) and further studied electrochemically and computationally. Moreover, [Ti(η⁶‐C₆H₆)₂] is found to react with the Lewis base 1,3‐dimethylimidazole‐2‐ylidene (IMe) to give the bent sandwich complex [Ti(η⁶‐C₆H₆)₂(IMe)].     

Synthesis and structures of photoactive rhenium carbonyl complexes derived from 2‐(pyridin‐2‐yl)‐1,3‐benzothiazole, 2‐(quinolin‐2‐yl)‐1,3‐benzothiazole and 1,10‐phenanthroline

Carbon monoxide (CO) has recently been identified as a gaseous signaling molecule that exerts various salutary effects in mammalian pathophysiology. Photoactive metal carbonyl complexes (photoCORMs) are ideal exogenous candidates for more controllable and site‐specific CO delivery compared to gaseous CO. Along this line, our group has been engaged for the past few years in developing group‐7‐based photoCORMs towards the efficient eradication of various malignant cells. Moreover, several such complexes can be tracked within cancerous cells by virtue of their luminescence. The inherent luminecscent nature of some photoCORMs and the change in emission wavelength upon CO release also provide a covenient means to track the entry of the prodrug and, in some cases, both the entry and CO release from the prodrug. In continuation of the research circumscribing the development of trackable photoCORMs and also to graft such molecules covalently to conventional delivery vehicles, we report herein the synthesis and structures of three rhenium carbonyl complexes, namely, fac‐tricarbonyl[2‐(pyridin‐2‐yl)‐1,3‐benzothiazole‐κ²N ,N ′](4‐vinylpyridine‐κN )rhenium(I) trifluoromethanesulfonate, [Re(C₇H₇N)(C₁₂H₈N₂S)(CO)₃](CF₃SO₃), ( 1 ), fac‐tricarbonyl[2‐(quinolin‐2‐yl)‐1,3‐benzothiazole‐κ²N ,N ′](4‐vinylpyridine‐κN )rhenium(I) trifluoromethanesulfonate, [Re(C₇H₇N)(C₁₆H₁₀N₂S)(CO)₃](CF₃SO₃), ( 2 ), and fac‐tricarbonyl[1,10‐phenanthroline‐κ²N ,N ′](4‐vinylpyridine‐κN )rhenium(I) trifluoromethanesulfonate, [Re(C₇H₇N)(C₁₂H₈N₂)(CO)₃](CF₃SO₃), ( 3 ). In all three complexes, the Re^I center resides in a distorted octahedral coordination environment. These complexes exhibit CO release upon exposure to low‐power UV light. The apparent CO release rates of the complexes have been measured to assess their comparative CO‐donating capacity. The three complexes are highly luminescent and this in turn provides a convenient way to track the entry of the prodrug molecules within biological targets.     

1,1‐Diethyl‐1‐germa‐2,3,4,5‐tetra‐tert‐butyl‐2,3,4,5‐tetraphospholan (C2H5)2Ge(tBuP)4, Molekül‐ und Kristallstruktur

1,1‐Diethyl‐1‐germa‐2,3,4,5‐tetra‐ tert ‐butyl‐2,3,4,5‐tetraphospholane (C₂H₅)₂Ge( t BuP)₄, Molecular and Crystal Structure The reaction of the diphosphide K₂[(tBuP)₄] · THF ( 1 ) with the germanium(IV) compound (C₂H₅)₂GeCl₂ leads via a [4 + 1]‐cyclo‐condensation reaction to 1,1‐diethyl‐1‐germa‐2,3,4,5‐tetra‐tert‐butyl‐2,3,4,5‐tetraphospholane (C₂H₅)₂Ge(tBuP)₄ ( 2 ) with the 5‐membered GeP₄ ring system. 2 could be characterized ³¹P NMR spectroscopically, mass spectrometrically and by a single crystal structure analysis.     

Synthesis and molecular structure of Cr(salen)(μ‐N)RhCl(COD): the first example of a heterobimetallic nitride‐bridged complex containing chromium

Five‐coordinate Cr(N)(salen) {salen is 2,2′‐[ethane‐1,2‐diylbis(nitrilomethylidyne)]diphenolate} reacts with [RhCl(COD)]₂ (COD is 1,5‐cyclooctadiene) to yield the heterobimetallic nitride‐bridged title compound, namely chlorido‐2κCl‐[2(η⁴)‐1,5‐cyclooctadiene]{2,2′‐[ethane‐1,2‐diylbis(nitrilomethylidyne)]diphenolato‐1κ⁴O,N,N′,O′}‐μ‐nitrido‐1:2κ²N:N‐chromium(V)rhodium(I), [CrRh(C₁₆H₁₄N₂O₂)ClN(C₈H₁₂)]. The Cr—N bond of 1.5936 (14) Å is elongated by only 0.035 Å compared to the terminal Cr—N bond in the precursor. The nitride bridge is close to being linear [173.03 (9)°] and the Rh—N bond of 1.9594 (14) Å is very short for a monodentate nitrogen‐donor ligand, indicating significant π‐acceptor character of the Cr[triple‐bond]N group.