XPS and AES characterization of hydrolysed γ‐mercaptopropyltrimethoxysilane deposited on Al,Zn and Al–43.4Zn–1.6Si alloy‐coated steel

In this paper Al, Zn and Al–43.4Zn–1.6Si (AlZn) alloy‐coated steel have been treated with the organofunctional silane γ‐mercaptopropyltrimethoxysilane (γ‐MPS). The influence of different metal substrates on the structure and composition of the silane films was investigated with XPS and AES. The films were obtained by dipping the substrates in the silane solution followed by a blow‐dry procedure in nitrogen gas. The results show that the surface concentration of the deposited silane is independent of the metal substrate and that the thickness of the silane film is non‐uniform. The AES measurements indicate that the silane film covers the entire substrate surface and XPS analysis of the silane‐treated substrate surfaces at different take‐off angles indicates that the γ‐MPS molecule is randomly orientated. Also, the results show that the silane is well hydrolysed under the solution conditions used. Finally, in the zinc‐containing silane‐metal systems, i.e. the silane‐treated AlZn and Zn substrates, the results indicate that the γ‐MPS molecules can bond to the substrate surfaces via the thiol group of the molecule. Copyright © 2004 John Wiley & Sons, Ltd.     

ToF‐SIMS study of 1‐dodecanethiol adsorption on Au,Ag, Cu and Pt surfaces

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) has been used to perform a chemical analysis of long‐chain thiol (CH₃(CH₂)₁₁SH)‐treated gold, silver, copper and platinum surfaces. All the mass peaks from positive and negative ion spectra within the range m/z = 0–2000 u are studied. ToF‐SIMS data revealed that on gold, silver and copper substrates 1‐dodecanethiol form dense standing‐up phases, but on platinum being a catalytically active substrate, we were able to identify also surface‐aligned parallel lying molecules in addition to a standing thiolate layer. Our study shows that when ToF‐SIMS spectra are analyzed, not only the existence of oligomers but also metal + hydrocarbon fragments give information about the order of SAM. Copyright © 2008 John Wiley & Sons, Ltd.     

ATR‐FTIR Kretschmann spectroscopy for interfacial studies of a hidden aluminum surface coated with a silane film and epoxy I. Characterization by IRRAS and ATR‐FTIR

Interfacial analysis is essential in many areas of interest, for instance within the ongoing research on environmentally friendly pretreatments of metal surfaces. While studies of the hidden interface between a metal and polymer top‐coat are of great importance, properties of a surface confined between two media are difficult to analyze in detail. Within the two parts of this study, ATR‐FTIR spectroscopy in the Kretschmann geometry is employed as the main analytical tool to study the interface between a thermo‐cured epoxy and aluminum pretreated with a silane film. The technique requires model systems based on thin metal films, but in contrast to most analytical techniques it permits the analysis of a hidden interface. Initial characterization of the silane film formed from a pH‐regulated γ‐APS and BTSE solution was conducted by both ATR‐FTIR Kretschmann and IRRAS spectroscopy. Absorption bands were obtained at 1250–900 cm^?1, assigned to Si? O functionalities, and at ～1570 and ～1410 cm^?1 assigned to acetate existing as a counter‐ion to γ‐APS. After application of the epoxy film, interfacial alterations were detected upon thermal curing including the densification of the epoxy film, the dehydration of aluminum and the formation of molecular epoxy reaction products. Few alterations could be assigned to the silane film. Calculated spectra derived from optical data can verify experimental results and aid data interpretation, and effects of metal oxidation of aluminum were confirmed by introducing gold as an additional substrate. The results showed that ATR‐FTIR Kretschmann spectroscopy is clearly a valuable tool for the study of hidden interfaces of stratified media. Copyright © 2011 John Wiley & Sons, Ltd.     

Cationization of dendritic macromolecule adsorbates on metals studied by time‐of‐flight secondary ion mass spectrometry

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) was utilized to study dendritic macromolecules with various architectures, such as dendrons, dendrimers and hyperbranched polyesters prepared from bis‐(hydroxymethyl)propionic acid (Bis‐MPA) and a series of hyperbranched polyethers based on 3‐ethyl‐3(hydroxymethyl)oxetane. The measurements were performed on spin‐coated thin films of the branched molecules (D) onto silicon, chemically etched copper foil and silver‐coated wafers. They showed weak signatures of molecular ions by proton capture (D + H)⁺ in the high mass range of the spectra (m/z > 400). On the contrary, cationization of the intact molecules with alkali or transition metal ions such as Na⁺, Cu⁺ or Ag⁺ was observed. High‐intensity quasi‐molecular ions (D + M)⁺ (with M = Na⁺, Cu⁺ or Ag⁺) allowed the studied polymers to be identified. The whole molecular species were observed for Bis‐MPA dendrons and dendrimers up to 3000 Da for hydroxyl or acetonide‐terminated derivatives. The success of the so‐called cationization experiments with metal substrates compared with analysis of molecular adsorbates on silicon is highlighted. The ToF‐SIMS sensitivity appeared useful to provide information about the molecular end‐groups or to highlight incomplete reaction occurring during some deprotection step of the synthesis. Only uncationized fragments of low masses were detected for the hyperbranched polyesters. This result suggested the effect of molecular asymmetry and/or flattening of the molecules on the substrates, which hampered the molecule lift‐off efficiency. Nevertheless, the hyperbranched polyethers were characterized based on the peak distribution of intensities, which allowed estimation of their molecular weight average. This work was intended to illustrate the capabilities of ToF‐SIMS to analyse dendritic polymers on surfaces. Copyright © 2003 John Wiley & Sons, Ltd.     

Investigation of block depth distribution in PS‐b‐PMMA block copolymer using ultra‐low‐energy cesium sputtering in ToF‐SIMS

Directed self‐assembly of block copolymers (BCPs) is a promising candidate for next generation nanolithography. In order to validate a given pattern, the lateral and in‐depth distributions of the blocks should be well characterized; for the latter, time‐of‐flight (ToF) SIMS is a particularly well‐adapted technique. Here, we use an ION‐TOF ToF‐SIMS V in negative mode to provide qualitative information on the in‐depth organization of polystyrene‐b‐polymethylmethacrylate (PS‐b‐PMMA) BCP thin films. Using low‐energy Cs⁺ sputtering and Bi₃⁺ as the analysis ions, PS and PMMA homopolymer films are first analyzed in order to identify the characteristic secondary ions for each block. PS‐b‐PMMA BCPs are then characterized showing that self‐assembled nanodomains are clearly observed after annealing. We also demonstrate that the ToF‐SIMS technique is able to distinguish between the different morphologies of BCP investigated in this work (lamellae, spheres or cylinders). ToF‐SIMS characterization on BCP is in good agreement with XPS analysis performed on the same samples. Copyright © 2013 John Wiley & Sons, Ltd.     

Diagonally Related s‐ and p‐Block Metals Join Forces: Synthesis and Characterization of Complexes with Covalent Beryllium–Aluminum Bonds

Additions of beryllium–halide bonds in the simple beryllium dihalide adducts, [BeX₂(tmeda)] (X=Br or I, tmeda=N,N,N′,N′‐tetramethylethylenediamine), across the metal center of a neutral aluminum(I) heterocycle, [:Al(^DipNacnac)] (^DipNacnac=[(DipNCMe)₂CH]^?, Dip=2,6‐diisopropylphenyl), have yielded the first examples of compounds with beryllium–aluminum bonds, [(^DipNacnac)(X)Al‐Be(X)(tmeda)]. For sake of comparison, isostructural Mg–Al and Zn–Al analogues of these complexes, viz. [(^DipNacnac)(X)Al‐M(X)(tmeda)] (M=Mg or Zn, X=I or Br) have been prepared and structurally characterized. DFT calculations reveal all compounds to have high s‐character metal–metal bonds, the polarity of which is consistent with the electronegativities of the metals involved. Preliminary reactivity studies of [(^DipNacnac)(Br)Al‐Be(Br)(tmeda)] are reported.     

Detecting changes in arabidopsis cell wall composition using time‐of‐flight secondary ion mass spectrometry

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) was previously used to characterize lignocellulosic materials, including woody biomass. ToF‐SIMS can acquire both rapid spectral and spatial information about a sample's surface composition. In the present study, ToF‐SIMS was used to characterize the cell walls of stem tissue from the plant model organism, Arabidopsis thaliana. Using principal component analyses, ToF‐SIMS spectra from A. thaliana wild‐type (Col‐0), cellulose mutant (irx3), and lignin mutant (fah1) stem tissues were distinguished using ToF‐SIMS peaks annotated for wood‐derived lignocellulose, where spectra from the irx3 and fah1 were characterized by comparatively low polysaccharide and syringyl lignin content, respectively. Spatial analyses using ToF‐SIMS imaging furthermore differentiated interfascicular fiber and xylem vessels based on differences in the lignin content of corresponding cell walls. These new data support the applicability of ToF‐SIMS peak annotations based on woody biomass for herbaceous plants, including model plant systems like arabidopsis. Copyright © 2015 John Wiley & Sons, Ltd.     

Layer‐by‐layer deposition of nitrilotris(methylene)triphosphonic acid and Zr(IV): an XPS,ToF‐SIMS,ellipsometry, and AFM study

Layer‐by‐layer assemblies consisting of alternating layers of nitrilotris(methylene)triphosphonic acid (NTMP), a polyfunctional corrosion inhibitor, and zirconium(IV) were prepared on alumina. In particular, a nine‐layer (NTMP/Zr(IV))₄NTMP stack could be constructed at room temperature, which showed a steady increase in film thickness throughout its growth by spectroscopic ellipsometry up to a final thickness of 1.79 ± 0.04 nm. At higher temperature (70 °C), even a two‐layer NTMP/Zr(IV) assembly could not be prepared because of etching of the alumina substrate by the heated Zr(IV) solution. XPS characterization of the layer‐by‐layer assembly showed a saw tooth pattern in the nitrogen, phosphorus, and zirconium signals, where the modest increases and decreases in these signals corresponded to the expected deposition and perhaps removal of NTMP and Zr(IV). Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) confirmed the attachment of the NTMP molecule to the surface through PO^?, PO₂^?, PO₃^?, and CN^? signals. Increasing attenuation of the Al signal from the substrate after deposition of each layer was observed by both XPS and ToF‐SIMS. Essentially complete etching of the alumina by the heated Zr(IV) solution was confirmed by spectroscopic ellipsometry, XPS, and ToF‐SIMS. Atomic force microscopy revealed that all the films were smooth with R_q roughness values less than 0.5 nm. Copyright © 2015 John Wiley & Sons, Ltd.     

Multi‐instrument characterization of the surfaces and materials in microfabricated,carbon nanotube‐templated thin layer chromatography plates. An analogy to ‘The Blind Men and the Elephant’

We apply a suite of analytical tools to characterize materials created in the production of microfabricated thin layer chromatography plates. Techniques used include X‐ray photoelectron spectroscopy (XPS), valence band spectroscopy, time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) in both positive and negative ion modes, Rutherford backscattering spectroscopy (RBS), and helium ion microscopy. Materials characterized include: the Si(100) substrate with native oxide: Si/SiO₂, alumina (35 nm) deposited as a diffusion barrier on the Si/SiO₂: Si/SiO₂/Al₂O₃, iron (6 nm) thermally evaporated on the Al₂O₃: Si/SiO₂/Al₂O₃/Fe, the iron film annealed in H₂ to make Fe catalyst nanoparticles: Si/SiO₂/Al₂O₃/Fe(NP), and carbon nanotubes (CNTs) grown from the Fe nanoparticles: Si/SiO₂/Al₂O₃/Fe(NP)/CNT. The Fe films and nanoparticles appear in an oxidized state. Some of the analyses of the CNTs/CNT forests appear to be unique: (i) the CNT forest appears to exhibit an interesting ‘channeling’ phenomenon by RBS, (ii) we observe an odd–even effect in the SIMS spectra of C_n^‐ species for n = 1 – 6, with the n ≥ 6 ions showing a steady decrease in intensity, and (iii) valence band characterization of CNTs using X‐radiation is reported. Initial analysis of the CNT forest by XPS shows that it is 100 at.% carbon. After one year, only ca. 0.25 at.% oxygen is observed. The information obtained from the combination of the different analytical tools provides a more complete understanding of our materials than a single technique, which is analogous to the story of ‘The Blind Men and the Elephant’. The raw XPS and ToF‐SIMS spectra from this study will be submitted to Surface Science Spectra for archiving. Copyright © 2013 John Wiley & Sons, Ltd.     

Tuning the Metal–Support Interaction by Structural Recognition of Cobalt‐Based Catalyst Precursors

Controlling the nature and size of cobalt(II) polynuclear precursors on γ‐alumina and silica‐alumina supports represents a challenge for the synthesis of optimal cobalt‐based heterogeneous catalysts. By density functional theory (DFT) calculations, we show how after drying the interaction of cobalt(II) precursor on γ‐alumina is driven by a structural recognition phenomenon, leading to the formation of an epitaxial Co(OH)₂ precipitate involving a Co–Al hydrotalcite‐like interface. On a silica‐alumina surface, this phenomenon is prevented due to the passivation effect of silica domains. This finding opens new routes to tune the metal–support interaction at the synthesis step of heterogeneous catalysts.     

Chemically stable hybrid polymer electrolyte membranes prepared by radiation grafting,sulfonation, and silane‐crosslinking techniques

To prepare a crosslinked hybrid polymer electrolyte membrane (PEM) with high chemical stability, a silane monomer, namely p‐styryltrimethoxysilane (StSi), was first grafted to poly(ethylene‐co‐tetrafluoroethylene) (ETFE) film by γ‐ray preirradiation. Hydrolysis‐condensation and sulfonation were then performed on the StSi‐grafted ETFE (StSi‐g‐ETFE) films to give them crosslinks and proton conductibility, respectively. Thus, a crosslinked proton‐conducting hybrid PEM was obtained. The crosslinks introduced by the silane‐condensation have an inorganic ? Si? O? Si? structure, which enhance the chemical and thermal stabilities of the PEM. The effect of the timing of the hydrolysis‐condensation (before or after sulfonation) and the sulfonation method (by chlorosulfonic acid or H₂SO₄) on the properties of the resulting hybrid PEMs such as ion‐exchange capacity, proton conductivity, water uptake, chemical stability, and methanol permeability were investigated to confirm their applicability in fuel cells. We conclude that the properties of the new crosslinked hybrid StSi‐grafted PEMs are superior to divinylbenzene (DVB)‐crosslinked styrene‐grafted membranes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5559–5567, 2008     

Stereospecific 1,3‐Aminobromination of Donor–Acceptor Cyclopropanes

Sn(OTf)₂‐catalyzed 1,3‐aminobromination of donor–acceptor cyclopropanes with various sulfonyl amides or electron‐poor anilines and N ‐bromosuccinimide is reported. These experimentally straightforward reactions occurred with complete regio‐ and stereospecificity (for anilines) to give γ‐aminated α‐brominated malonic diesters in good to excellent yields (up to 98 %). These compounds served as valuable substrates for subsequent reactions to provide substituted azetidines and γ‐lactams in high yields.     

Static SIMS studies of fatty alcohols,amines and esters on gold and aluminium–magnesium alloy surfaces

Static secondary ion mass spectrometry was used to study the chemical reactions and lateral distributions of fatty amines, alcohols and esters spin coated onto gold surfaces and commercial aluminium–magnesium (Al–Mg) alloy surfaces, cleaned using UV–ozone. The aim of this study is to develop an understanding of the interactions of model lubricants with metal surfaces, such as gold and aluminium. This static SIMS study of organic thin films has been able to identify specific reaction products on the aluminium surface for each functional group. This work demonstrates that organic molecules with alcohol, ester and amine functional groups undergo specific chemical reactions with oxidized Al–Mg alloy surfaces. For example, films composed of the fatty alcohol dodecanol were observed to emit monomers, dimers and trimers with discrete distributions. In addition, negative secondary ion mass spectra indicate that a surface carboxylate is formed from the alcohol. The formation of carboxylate reaction products was confirmed by Fourier transform infrared spectroscopy. On Al–Mg alloy surfaces, a direct interaction with the amine and aluminium oxide surface is observed by the detection of a molecular ion that corresponds to the mass of dodecylamine and AlO^?, characteristic of aluminium oxide. Ethyl laurate was shown to eliminate the ethyl group, leaving the laurate anion. This study demonstrates the ability of time‐of‐flight (ToF) SIMS to discriminate and detect chemical reaction products formed between model lubricant molecules and metal surfaces. As a result of this study, the use of ToF‐SIMS to identify reaction products of model lubricants can be extended to provide a better understanding of the interactions of lubricants and metal surfaces at high temperatures and pressures that more closely resemble the conditions encountered in industrial rolling processes. Copyright © 2005 John Wiley & Sons, Ltd.     

Investigation of ionic liquids under Bi‐ion and Bi‐cluster ions bombardment by ToF‐SIMS

A systematic study of five different imidazolium‐based room temperature ionic liquids, 1‐butyl‐3‐methylimidazolium acetate, 1‐butyl‐3‐methylimidazolium nitrate, 1‐butyl‐3‐methylimidazolium iodide, 1‐butyl‐3‐methylimidazolium hexafluorophosphate and 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide were carried out by means of time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) in positive and negative ion mode. The compounds were measured under Bi‐ion and Bi‐cluster ions (Bi_2–7⁺, Bi_{3, 5}²⁺) bombardment, and spectral information and general rules for the fragmentation pattern are presented. Evidence for hydrogen bonding, due to high molecular secondary cluster ions, could be found. Hydrogen bonding strength could be estimated by ToF‐SIMS via correlation of the anionic yield enhancement with solvent parameters. Copyright © 2010 John Wiley & Sons, Ltd.     

Hydroxylation of the silica in microfabricated thin layer chromatography plates as probed by time‐of‐flight secondary ion mass spectrometry and diffuse reflectance infrared Fourier transform spectroscopy

Microfabricated silica thin layer chromatography (TLC) plates have previously been prepared on patterned carbon nanotube forests. The high temperatures used in their fabrication reduce the number of hydroxyl groups on their surfaces. Fortunately, silica can be rehydroxylated. In diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), a silanol peak below 3740 cm^?1 indicates a well‐hydroxylated silica surface that is fit for chromatography. Hydroxylations of our materials with HF are so effective that it is not possible to discern the position of this peak. In contrast, this signal is discernable when the plates are treated with NH₄OH. To find a more convenient method for studying the surfaces of TLC plates, time‐of‐flight secondary ion mass spectroscopy (ToF‐SIMS) was considered. ToF‐SIMS is advantageous because multiple microfabricated TLC plates must be scraped to obtain enough silica for one DRIFT analysis, while static SIMS can be performed on very small regions (500 × 500 µm² or less) of individual plates. Ratios of the SiOH⁺ and Si⁺ ToF‐SIMS signals for microfabricated TLC plates correlated well with ~3740 cm^?1 silanol peaks from DRIFT. Thus, SIMS allows direct analysis of all of our treated and untreated plates, including those hydroxylated with HF. The best hydroxylation condition for HF, which was better than any studied for NH₄OH, was around 150 ppm at room temperature. The best hydroxylation condition for NH₄OH was 50 °C for 72 h. ToF‐SIMS versus DRIFT results of commercial TLC plates were also obtained and evaluated. Copyright © 2014 John Wiley & Sons, Ltd.     

Elusive Silane–Alane Complex [SiH⋅⋅⋅Al]: Isolation,Characterization, and Multifaceted Frustrated Lewis Pair Type Catalysis

The super acidity of the unsolvated Al(C₆F₅)₃ enabled isolation of the elusive silane–alane complex [Si? H???Al], which was structurally characterized by spectroscopic and X‐ray diffraction methods. The Janus‐like nature of this adduct, coupled with strong silane activation, effects multifaceted frustrated‐Lewis‐pair‐type catalysis. When compared with the silane–borane system, the silane–alane system offers unique features or clear advantages in the four types of catalytic transformations examined in this study, including: ligand redistribution of tertiary silanes into secondary and quaternary silanes, polymerization of conjugated polar alkenes, hydrosilylation of unactivated alkenes, and hydrodefluorination of fluoroalkanes.     

Elusive Silane–Alane Complex [Si?H⋅⋅⋅Al]: Isolation,Characterization, and Multifaceted Frustrated Lewis Pair Type Catalysis

The super acidity of the unsolvated Al(C₆F₅)₃ enabled isolation of the elusive silane–alane complex [Si H⋅⋅⋅Al], which was structurally characterized by spectroscopic and X‐ray diffraction methods. The Janus‐like nature of this adduct, coupled with strong silane activation, effects multifaceted frustrated‐Lewis‐pair‐type catalysis. When compared with the silane–borane system, the silane–alane system offers unique features or clear advantages in the four types of catalytic transformations examined in this study, including: ligand redistribution of tertiary silanes into secondary and quaternary silanes, polymerization of conjugated polar alkenes, hydrosilylation of unactivated alkenes, and hydrodefluorination of fluoroalkanes.     

Transient Silenes as Versatile Synthons – The Reaction of Dichloromethyl‐tris(trimethylsilyl)silane with Organolithium Reagents

Treatment of dichloromethyl‐tris(trimethylsilyl)silane (Me₃Si)₃Si–CHCl₂ ( 1 ), prepared by the reaction of tris(trimethylsilyl)silane with chloroform in presence of potassium tertbutoxide, with organolithium reagents (molar ratio 1 : 3) affords the bis(trimethylsilyl)methyl‐disilanes Me₃SiSiR₂–CH(SiMe₃)₂ ( 12 a–d ) ( a : R = Me, b : R = n‐Bu, c : R = Ph, d : R = Mes). The formation of 12 a–d is discussed as proceeding through an exceptional series of isomerization and addition reactions involving intermediate silyl substituted carbenoids and transient silenes. The carbenoid (Me₃Si)₂PhSi–C(SiMe₃)LiCl ( 8 c ) is moderately stable at low temperature and was trapped with water to give (Me₃Si)₂PhSi–CH(SiMe₃)Cl ( 9 c ) and with chlorotrimethylsilane affording (Me₃Si)₂PhSi–CCl(SiMe₃)₂ ( 7 c ). For 12 d an X‐ray crystal structure analysis was performed, which characterizes the compound as a highly congested silane with bond parameters significantly deviating from standard values.     

Molecular identification of Asian lacquers from different trees using Py‐GC/MS and ToF‐SIMS

Traditional Asian lacquers are natural products with highly valued properties, including beauty, gloss, and durability. Pyrolysis‐gas chromatography/mass spectrometry is the technique of choice to study insoluble polymeric lacquer films. In the present study, pyrolysis‐gas chromatography/mass spectrometry results showed that the pyrolysis products of lacquer films were different for all of the studied trees, with urushiol derivatives detected in Toxicodendron vernicifluum from China, Japan, and Korea; laccol in Toxicodendron succedaneum from Vietnam; and thitsiol in Gluta usitata from Myanmar. Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) was also used to characterize the Asian lacquers, avoiding the time‐consuming and destructive processes of other techniques. The ToF‐SIMS spectra provided structural characterization of a series of urushiol, laccol, and thitsiol derivatives for T vernicifluum from China, Japan, and Korea; T succedaneum from Vietnam; and G usitata from Myanmar, respectively. To differentiate the ToF‐SIMS results for the different Asian lacquer films, principal component analysis was used because it can extract differences in the spectra and indicate what peaks are responsible for these differences. The results indicate that lacquer films from different lacquer trees can be very different. Therefore, ToF‐SIMS with principal component analysis is suitable for the characterization and differentiation of Asian lacquer films in cultural heritage applications.     

Quantitative analysis of styrene‐pentafluorostyrene random copolymers by ToF‐SIMS and XPS

Poly(styrene) (PS), poly(2,3,4,5,6‐pentafluorostyrene) (5FPS) and their random copolymers were prepared by bulk radical polymerization. The spin‐cast polymer films of these polymers were analyzed using X‐ray photoelectron spectroscopy (XPS) and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). The surface and bulk compositions of these copolymers were found to be same, implying that surface segregation did not occur. The detailed analysis of ToF‐SIMS spectra indicated that the ion fragmentation mechanism is similar for both PS and 5FPS. ToF‐SIMS quantitative analysis using absolute peak intensity showed that the SIMS intensities of positive styrene fragments, particularly C₇H₇⁺, in the copolymers are higher than the intensities expected from a linear combination of PS and 5FPS, while the SIMS intensities of positive pentafluorostyrene fragments are smaller than expected. These results indicated the presence of matrix effects in ion formation process. However, the quantitative approach using relative peak intensity showed that ion intensity ratios are linearly proportional to the copolymer mole ratio when the characteristic ions of PS and 5FPS are selected. This suggests that quantitative analysis is still possible in this copolymer system. Copyright © 2005 John Wiley & Sons, Ltd.