Molecular orientation of EVA chains adsorbed on chemically controlled surfaces: influence of specific interactions

Molecular orientation of ethylene–vinyl acetate (EVA) copolymer nanofilms adsorbed on chemically controlled surfaces is studied. Four EVA copolymers with different contents of vinyl acetate (VA) were spin‐coated onto gold, COOH and NH₂ functionalized substrates in order to study chain behaviour when adsorbed in a quasi‐two‐dimensional system. Polarization‐modulation infrared reflection–absorption spectroscopy (PM‐IRRAS), a very suitable technique to study thin films, was the key to quantitative calculation of EVA chain orientational angles. Acid–base interactions between carbonyl groups of the chain ramification (vinyl acetate units) and the surface functionalities are evidenced on the basis of infrared spectra. Their incidence on the molecular orientation is also discussed. Our results show a quasi‐parallel orientation of EVA main chains with respect to the surface plane for all adsorption substrates. At the same time, orientation changes of the acetate groups are observed when the EVA copolymer is adsorbed onto functionalized substrates, suggesting that acid–base interactions could influence the orientation of these groups. However, these changes are limited and cannot reorient the main chain axis. Moreover, our results show that increasing VA content in the chain does not lead to more carbonyl functions involved in acid–base interactions with the adsorption surface. This fact also will be discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

PM-IRRAS spectroscopy for the characterization of polymer nanofilms: chains conformation,anisotropy and crystallinity

This paper is focused on the use of the Polarization-Modulation Infrared Reflection-Absorption Spectroscopy (PM-IRRAS) for studying thin polymer films at interfaces. When forming a polymer film on a metallic substrate, for instance by spin-coating, the characterization of the polymeric layer becomes very difficult given the small amount of matter deposited and also because of the contact with the metal. Among the techniques well adapted to surface and interface analyses, the PM-IRRAS spectroscopy represents an excellent tool to probe ultra-thin films. Different systems have been selected in this study such as polyamides (PA) and ethylene-co-vinyl acetate (EVA) nanofilms spin-coated onto chemically controlled surfaces (i.e. thiol self-assembled monloayers grafted onto gold coated glass slides). PM-IRRAS spectroscopy allowed us to characterize the polymer anisotropy (chains orientation and conformation), to suggest a model for chain organization at the polymer/substrate interface, and to calculate the orientation angles. Moreover, we were able to determine, by using PM-IRRAS, the degree of crystallinity of PA and EVA films of nanometric dimensions without any calibration procedure needed by other techniques.     

Structure evolution of α′‐phase poly(lactic acid)

Poly(lactic acid) films consisting of α′‐forms were prepared and uniaxially drawn. The effects of the draw rate at temperatures above the glass transition temperature on chain conformation, degree of crystallinity, and crystalline phase transformation were investigated by a combination of vibrational spectroscopy (infrared and Raman), differential scanning calorimetry, and wide‐angle X‐ray diffraction (WAXD). It was established that the α′‐crystal's phase of poly(lactic acid) films does not transform into either an α or β crystals on uniaxial drawing at a fixed draw ratio of 4. However, the degree of crystallinity was significantly increased on deformation. The structural change as a function of deformation also promotes an increase in the strain‐induced enthalpic relaxation endothermic peak appearing near the glass transition region. While the overall changes in physical properties can be attributed to the changes in the degree of crystallinity as a function of strain rate, polarized Raman spectra, and WAXD clearly illustrated changes and the differences in the amorphous and crystalline orientation as a function of processing conditions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1446–1454, 2011     

Infrared study of substrate effects in the surface region of polyethylene

The surface of thin polyethylene films (ca. 1 mil) nucleated on high- and low-energy surfaces was studied. It was found that the degree of crystallinity in the surface region, as determined by transmission and reflection infrared spectroscopy, was dependent on the nature of the substrate. Relatively small and randomly oriented spherulites were observed in the surface region of thin polyethylene films nucleated on gold, a high-energy surface. The surface region of a thin polythylene film nucleated on polytetrafluoroethylene, a low-energy substrate, was observed to have considerably fewer spherulites, but much larger in size, with orientation restricted, in general, to the plane of the film. The relative intensity of the 720 cm^?1 to the 730 cm^?1 band in the reflectance spectra (ATR) indicates that the surface region of a polyethylene film nucleated on a high surface energy substrate is more crystalline than the surface region of a film nucleated on a low surface energy substrate.     

Covalent photochemical functionalization of amorphous carbon thin films for integrated real-time biosensing

Recent studies have demonstrated that carbon, in the form of diamond, can be functionalized with molecular and/or biomolecular species to yield interfaces exhibiting extremely high stability and selectivity in binding to target biomolecules in solution. However, diamond and most other crystalline forms of carbon involve high-temperature deposition or processing steps that restrict their ability to be integrated with other materials. Here, we demonstrate that photochemical functionalization of amorphous carbon films followed by covalent immobilization of DNA yields highly stable surfaces with excellent biomolecular recognition properties that can be used for real-time biological detection. Carbon films deposited onto substrates at 300 K were functionalized with organic alkenes bearing protected amine groups and characterized using X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The functionalized carbon surfaces were covalently linked to DNA oligonucleotides. Measurements show very high selectivity for binding to the complementary sequence, and a high density of hybridizing DNA molecules. Samples repeatedly hybridized and denatured 25 times showed no significant degradation. The ability to use amorphous carbon films as a basis for real-time biosensing is demonstrated by coating quartz crystal microbalance (QCM) crystals with a thin carbon film and using this for covalent modification with DNA. Measurements of the resonance frequency show the ability to detect DNA hybridization in real time with a detection limit of <3% of a monolayer, with a high degree of reversibility. These results demonstrate that functionalized films of amorphous carbon can be used as a chemically stable platform for integrated biosensing using only room-temperature processing steps.     

Silica aerogel–poly(ethylene‐co‐vinyl acetate) composite for transparent heat retention films

Poly(ethylene‐co‐vinyl acetate) (EVA) plastic films are widely used for solar coverings including photovoltaic modules and commercial greenhouse films, but are poor at controlling heat flow. In this work, silica aerogel (SA) nanogels were examined for preparing transparent heat retention EVA films that block far infrared spectra radiation to maintain heat, without compromising the optical performance of the films. SA nanogels were melt‐mixed using a mini twin‐screw extruder with EVA pellets to form SA/EVA composite, which were pressed into thin films with controlled thickness. The composite films were characterized in terms of optical properties using a variety of analytical methods including FTIR, UV–Vis spectroscopy, electron, confocal, and atomic force microscopy. Both thermicity and thermal conductivity of commercial and experimental SA/EVA films were measured. The results demonstrated that the SA/EVA films gave improved infrared retention compared to commercial thermal plastic films without compromising visible light transmission, showing the potential for this approach in next generation heat retention films. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 927–935     

A novel layer-by-layer approach to immobilization of polymers and nanoclusters

This paper reports a simple method for the multilayer immobilization of conjugated polymers, gold nanoparticles on solid supports. Poly(phenyenevinylene) functionalized with aldehyde and aminooxy groups was chemoselectively immobilized onto both glass and gold substrates via layer-by-layer deposition. The physical properties of the thin films were characterized by grazing angle IR, TM-AFM, fluorescence, and UV-visible spectroscopy. This methodology was also successfully applied to prepare polymer/gold nanocluster alternating multilayers. The results show that this methodology provides a general route for preparing robust and functionalizable multilayer films on solid substrates with molecular-level thickness control.     

Thioether‐Functionalized Quinone‐Based Resorcin[4]arene Cavitands: Electroswitchable Molecular Actuators

The utility of molecular actuators in nanoelectronics requires activation of mechanical motion by electric charge at the interface with conductive surfaces. We functionalized redox‐active resorcin[4]arene‐quinone cavitands with thioethers as surface‐anchoring groups at the lower rim and investigated their propensity to act as electroswitchable actuators that can adopt two different conformations in response to changes in applied potential. Molecular design was assessed by DFT calculations and X‐ray analysis. Electronic properties were experimentally studied in solution and thin films electrochemically, as well as by X‐ray photoelectron spectroscopy on gold substrates. The redox interconversion between the oxidized (quinone, Q ) and the reduced (semiquinone, SQ ) state was monitored by UV‐Vis‐NIR spectroelectrochemistry and EPR spectroscopy. Reduction to the SQ state induces a conformational change, providing the basis for potential voltage‐controlled molecular actuating devices.     

Infrared spectroscopic characterization of oriented polyamide 66: Band assignment and crystallinity measurement

Having found much ambiguity in the infrared band assignments for polyamide 66 (PA66), we revisited some of these assignments before using infrared spectroscopy to assess microstructure changes resulting from multiple thermal treatments. We discovered that earlier assignments of the 1144 and 1180 cm⁻¹ bands to the amorphous (noncrystalline) phase were incorrect, whereas the bands at 924 and 1136 cm⁻¹ can be attributed unambiguously to the noncrystalline phase. We also confirmed that PA66 bands at 936 and 1200 cm⁻¹ are crystalline bands. The normalized absorbance of the 1224‐cm⁻¹ fold band increases in proportion to crystallinity, indicating that chain folding is the predominant mechanism of thermal crystallization in PA66. We demonstrated that infrared spectroscopy can be used to estimate the degree of crystallinity of PA66, and two methods were explored. One is a calibration method in which the band ratio of 1200 and 1630 cm⁻¹ is plotted against crystallinity measured by density. The other is an independent infrared method based on the assumption that PA66 satisfies a two‐phase structure model. The crystallinity determined by the independent infrared method showed good agreement with the crystallinity obtained from density measurements. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 516–524, 2000     

Adsorption of polyamides on SAMs: effect of SAM grafting density on polyamide morphology

In this paper we focus on the understanding of the morphological behaviour of Polyamide 66 (PA66) in a constrained geometry generated by adsorption onto chemically controlled interfaces such as thiol self‐assembled monolayers (SAMs) grafted on gold substrates. The latter are prepared under different experimental conditions to illustrate the mechanism of PA–SAM interaction. The crystalline morphology of polyamide nanofilms, analysed by atomic force microscopy, was found to be dependent directly on the surface chemistry that is controlled by the thiol functionality (e.g. NH₂‐ and COOH‐ terminated thiols) and by the density and the structural organization of the grafts. These two parameters depend on the immersion times of the gold substrate in the thiol solutions. Furthermore, a direct correlation is evidenced between the polyamide morphology in thin films and its crystalline amount, as calculated by polarization–modulation infrared reflection–absorption spectroscopy. Quantitative results propose an interfacial interaction mechanism between the polyamide chains and the surface grafts, and give information about the SAM formation kinetics and its organization during the grafting process. Copyright © 2003 John Wiley & Sons, Ltd.     

Influence of thermal annealing on the structural and optical properties of maghemite (γ‐Fe2O3) nanoparticle thin films

In this study, maghemite (γ‐Fe₂O₃) nanoparticles were initially synthesized via chemical co‐precipitation and then deposited by spray pyrolysis as thin films on white glass substrates. The thin films were annealed for 8 h at 400, 450, 500, 550, and 600 °C in an oven. The structural studies of maghemite nanoparticles were carried out using X‐ray diffractometer. Structural properties that we investigated by X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, SEM, and Energy dispersive X‐ray analysis (EDS). Optical properties of the samples were also investigated by ultraviolet‐visible (UV–vis) spectroscopy. The results showed that maghemite nanoparticles have crystalline structure with domain that increases in size with increasing annealing temperature. The optical band gap values were found to reduce from 2.9 to 2.4 eV with increase in annealing temperature. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoresponsive poly(methyl methacrylate)‐b‐azodendron block copolymers prepared by ATRP and click chemistry

A range of block copolymers (BCs) consisting of a linear poly(methyl methacrylate) (PMMA) block linked to an aliphatic polyester dendron functionalized with azobenzene moieties have been synthesized by sequential atom transfer radical polymerization (ATRP) and Click Chemistry. Two alkyne‐functionalized PMMA homopolymers with different molecular weights were obtained by ATRP and coupled to generations 2 to 4 of azodendrons bearing an azide group at the focal points. In the case of the azodendron with the highest generation number, the length of the flexible spacer attaching the cyanoazobenzene units to the dendron has also been modified. The coupling of both blocks and purity of BCs were checked by gel permeation chromatography, nuclear magnetic resonance, and infrared spectroscopy. The thermal transitions and liquid crystalline behavior of the BCs were investigated by differential scanning calorimetry and polarized‐light optical microscopy. A morphological study was carried out by transmission electron microscopy, using samples annealed at 115 °C. Photo‐induced anisotropy was induced in thin films of these materials after annealed at 115 °C. The highest stable birefringence values were obtained for the BCs bearing 8 and 16 azobenzene units in the dendritic block. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1538–1550, 2010     

Structure,orientation, and conformation of adsorbed polyamides

The structural properties and interfacial organization of polyamides adsorbed as thin films were investigated. Polarization‐modulation infrared reflection–absorption spectroscopy was used first to identify the crystalline structure of adsorbed layers and to reveal the conformation and orientation of adsorbed chains. The influence on the structure and molecular orientation of the number of carbon atoms in the aliphatic chain of the diacid part was investigated (PA 66, 610, and 612). The effect of the substrate surface chemistry was also examined. Gold substrates are either inert or functionalized with OH groups. Grafting of the OH functions did not affect the orientation of chains that apparently lay rather parallel to the interface, whereas the crystalline morphology was dependent on the substrate chemical functionality. Knowledge of the structure and orientation of chains adsorbed at an interface was of fundamental importance for the prediction of adhesive strength, that is, the final performance of these latter depended strongly on the properties of the interface formed between the solids brought into contact. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1464–1476, 2002     

Layer-by-layer assembled gold nanoparticle films on amine-terminated substrates

This work reports the fabrication and characterization of multilayered gold nanoparticle (AuNP) thin films on aminosilane functionalized substrates. The films are fabricated via layer-by-layer (LbL) assembly using as-synthesized, un-modified AuNPs and poly(allylamine hydrochloride) as the building blocks. While most literature reports that AuNP based LbL assemblies are constructed with a single interlayer binding force, this work shows that both coordination and electrostatic interaction are involved in the process of assembly based on X-ray photoelectron spectroscopic results. The stepwise film growth behavior is demonstrated by atomic force spectroscopy and UV-vis spectroscopy. It is found that the particles agglomerate with each other and form large clusters when the number of assembled layers increases.     

Structural characteristics and moisture sorption behavior of nylon‐6/clay hybrid films

The structure of nylon‐6 hybrids with synthetic or natural clays was investigated for melt‐pressed films with Fourier transform infrared spectroscopy, wide‐angle X‐ray diffraction, and differential scanning calorimetry in comparison with the nylon‐6 homopolymer. In contrast to the development of familiar α‐form crystals in plain nylon‐6 film, the hybrid films produced γ‐form crystals when nylon‐6 was conjugated with synthetic mica, whereas the hybridization with natural montmorillonite gave rise to both α‐ and γ‐crystalline modifications. The degree of crystallinity of the nylon‐6 hybrid with synthetic mica was the highest of the three series. Moisture sorption isotherms obtained for these nylon‐6‐based films were all typically sigmoid‐shaped, although the prevalence of a higher crystallinity in the hybrid samples lowered the degree of moisture regain. The sorption behavior was analyzed well in terms of the parameters of a Brunauer–Emmett–Teller multiplayer adsorption model and a Flory–Huggins treatment. It was also observed that the cluster formation of the water adsorbed into the nylon‐6 matrix tended to be restricted by the hybridization with clay. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 479–487, 2002; DOI 10.1002/polb.10106     

New insights into the development of ordered structure in poly(ethylene terephthalate), II Results from transmission infrared spectroscopy of thin films

To complement our earlier work involving external reflection infrared spectroscopy of PET, a set of thin PET films with different crystalline structures (amorphous, strain-induced crystallinity, thermally induced crystallinity) was prepared and analyzed in detail in the transmission mode. In analogy with the reflection work, factor analysis was used to generate three basis spectra corresponding to three distinct structures: G = an arrangement involving gauche glycol conformers and disordered terephthalate groups; TX = an arrangement involving trans glycol conformers and disordered terephthalate groups (probably a mixture of cis and trans conformers); and TC = the all-trans arrangement found in the true crystalline phase. The TX structure is believed to play an important role in the widely reported “intermediate” phase of PET, which is particularly significant in cold-drawn samples. The transmission spectra confirm the validity of the reflection spectra and also provide more detailed information. In addition, analysis of two biaxially oriented industrial films has provided further information on the geometry of certain vibrational modes. Overall, the results lead to a better understanding of the complex crystalline structure of PET and its relationship to the infrared spectrum.     

π‐Plasmon absorbance films of carboxylic functionalized CNTs coupled with renewable PGP platforms

π‐Plasmon absorbance films of carboxylic functionalized multiwall carbon nanotubes (CNTs) coupled with renewable and recycled polycaprolactone grafted pectin (PGP) platforms as successful alternative for ordinary nondegradable platforms were investigated. Characterization of the synthesized carboxylic functionalized CNTs was performed using ¹H NMR and attenuated total reflectance Fourier transform infrared for structural identification, thermogravimetric analysis and derivative thermogravimetric analysis for thermal stability, and X‐ray powder diffraction for crystal structure, whereas the characterization of prepared PGP was done by means of attenuated total reflectance Fourier transform infrared for chemical structure, differential scanning calorimetry for melting endotherms of polycaprolactone and high crystalline structure of PGP, and thermogravimetric analysis and derivative thermogravimetric analysis for thermal stability of PGP. Fabrication of water‐dispersed carboxylic functionalized CNTs coupled with PGP films was performed by casting technique in the presence of Ca²⁺ as cross‐linker. The thin films were tested for π‐plasmon absorbance using UV‐Vis spectrometry. Different fractions of carboxylic functionalized CNTs and PGP films demonstrated π‐plasmon absorbance broad peaks at λ_max = 232 nm, which corresponded to 5.36 eV. The fabrication of novel films from renewable recycled PGP platform and advanced carboxylic functionalized CNTs properties will be the key features for many of next forthcoming technologies. The PGP considered as environment‐friendly and easily degradable platforms will be a successful alternative for conventional nondegradable electronic platforms, and water‐dispersed carboxylic functionalized CNTs with advanced properties will be finding accelerating executive applications.     

Morphological changes of annealed poly‐ε‐caprolactone by enzymatic degradation with lipase

The effects of crystallinity and temperature on enzymatic degradation of poly‐ε‐caprolactone (PCL) films and structural changes after degradation have been studied using weight loss, differential scanning calorimetry, and optical microscopy. The weight loss during the enzymatic degradation of PCL suggested that the extent of biodegradation and the rate of degradation strongly depend on the initial crystallinity. PCL films of lower crystallinity (24%) degraded much faster than films of higher crystallinity (45%). The crystallinity of low‐crystalline PCL films increased with increasing degradation time, whereas the crystallinity of high‐crystalline PCL films decreased with time. The spherulite size increased with increasing degradation time for low‐crystalline samples but decreased with time for high‐crystalline samples. These results revealed that degradation occurs first in the amorphous region where the degradation rate is much higher, and the crystalline region of the PCL film started to degrade simultaneously for those PCL with higher crystallinity. The enzymatic degradation of PCL proceeded from the free amorphous to restricted amorphous followed by lamellar edges, where PCL chains have higher mobility irrespective of hydrolysis temperature. Caproic acid was identified as the primary product formed after degradation and confirmed by proton nuclear magnetic resonance spectroscopy, suggesting that degradation occurs through the depolymerization mechanism. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 202–211, 2010     

Preparation of Amino-functionalized Multiwall Carbon Nanotube/Gold Nanoparticle Composites

Multiwall carbon nanotubes (MWNT) were modified orderly with carboxyl groups and amino groups. The MWNT/gold nanoparticle composites were formed when the amino‐functionalized MWNT was interacted with gold colloids. The functionalized MWNT was characterized using Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. The amino‐functionalized MWNT allows further attaching gold nanoparticles through electrostatic interaction between the negatively charged gold nanoparticles and amino groups on the surface of the MWNT. The composite of gold nanoprticles and amino‐functionalized MWNT was characterized by transmission electron microscopy. This method decorating carbon nanotubes can be used to identify the location of functional groups, i.e. defect sites on carbon nanotubes.     

拉伸温度对α’-型聚乳酸结构与性能的影响

α’-晶型聚乳酸(PLA)膜被制备和单轴拉伸.通过凝胶渗透色谱仪(GPC)、全反射红外光谱(ATR-IR)、差示扫描量热仪(DSC),X射线衍射(XRD)及Raman光谱等测试技术研究了拉伸温度梯度变化对α’-晶型PLA膜的分子量及其分布、分子链构象、结晶度、晶型转变和取向行为的影响.在恒定拉伸速度与应变下,拉伸温度对PLA膜的应力-应变曲线,特别是屈服强度、拉伸模量产生了较大的影响,其值随拉伸温度的增加而降低.GPC测试结果表明,在不同的温度下拉伸后,PLA会发生一定程度的降解,分子量降低;ATR-IR,XRD,DSC和Raman光谱测试结果表明,在不同的温度下拉伸后α’-型PLA没有发生晶型的转变,即没有由α’-晶体转变为α-或β-晶体.结果表明PLA的结晶度、分子链取向程度强烈依赖于拉伸温度:当拉伸温度低于100℃时,α’-型PLA膜的结晶度与沿着拉伸方向的变形程度随拉伸温度的增加而增加,分子链的高度取向诱导了PLA结晶;当拉伸温度超过100℃后,PLA的分子链沿着拉伸方向上的有序度与结晶度将降低.