Micellar structure and mechanical properties of block copolymer‐modified epoxies

Amphiphilic block copolymers provide a unique means for toughening epoxy resins because they can self‐assemble into different inclusion shapes before epoxy curing. The two examples reported here are spherical micelles and vesicles, which form in blends containing epoxy and symmetric or asymmetric poly(ethylene oxide)–poly(ethylene‐alt‐propylene) (PEO–PEP) block copolymer with PEO volume fractions of 0.5 and 0.26, respectively. The vesicles and spherical micelles were characterized by transmission electron microscopy and small‐angle X‐ray scattering (SAXS), respectively. SAXS data from the spherical micelles were fit to the Percus–Yevick model for a liquid‐like packing of spheres with hard‐core interactions. Mechanical properties of spherical‐micelle‐modified and vesicle‐modified epoxies in the dilute limit are compared. The glass‐transition temperature and Young's (storage) modulus were tested with dynamic mechanical spectroscopy, and compact‐tension experiments were performed to determine the critical plane‐strain energy release rate for fracture. Vesicles were most effective in improving the epoxy fracture resistance. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2996–3010, 2001     

The Role of inclusion size in toughening of epoxy resins by spherical micelles

We report our finding of an optimal length scale for toughening of epoxies using spherical micelles formed by block copolymers. The amphiphilic diblock copolymer poly(hexylene oxide)‐poly(ethylene oxide) (PHO‐PEO) with 30 wt % PEO self‐assembled to form spherical micelles in a bisphenol A epoxy resin with a phenol novolac hardener. We systematically increased the size of the spherical micelles from 20–30 nm to 0.5–10 μm by swelling their PHO core using PHO homopolymer. Although all the blends were tougher than the unmodified epoxy, the largest enhancement of fracture resistance was measured in blends containing 0.1–1 μm spherical inclusions. This enhanced toughness was correlated with plastic deformation by shear banding in tensile test and greater roughness of the fracture surface. Smaller micelles neither induced plastic deformation nor contributed to surface roughness significantly whereas larger micelles acted as local defects resulting in early failure. These findings provide a framework in assessing the toughening effects of blended block copolymers on epoxy resins. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1125–1129, 2009     

Structure and properties of PBO–PEO diblock copolymer modified epoxy

Amphiphilic poly(n‐butylene oxide)‐b‐poly(ethylene oxide) (PBO–PEO) diblock copolymers of various compositions were synthesized and studied as modifiers for epoxy resins. In blends of PBO–PEO, epoxy resin, and curing agent, the copolymers formed well‐defined microstructures that persisted upon curing of the epoxy. The resulting morphologies were vesicles, worm‐like micelles, and spherical micelles (in order of increasing size of PEO block), as well as transitional morphologies. Addition of 5% by weight of these block copolymers improved the fracture toughness of the epoxy by as much as 19 times with relatively small reduction in the elastic modulus. The highest level of toughness was measured in a system containing branched worm‐like micelles. Close examination of the fracture surfaces of these compositions suggests that although all the dispersed morphologies played a similar role to inclusions in particle‐toughened thermosets, crack deflection toughening contributed to the significantly higher levels of toughness in the worm‐like micelle systems. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Chem 43: 1950–1965, 2005     

Preparation of polymeric vesicles through ultrasonic treatment of poly(styrene‐block‐2‐vinylpyridine) micelles under alkaline conditions

An approach for the preparation of block copolymer vesicles through ultrasonic treatment of polystyrene‐block‐poly(2‐vinyl pyridine) (PS‐b‐P2VP) micelles under alkaline conditions is reported. PS‐b‐P2VP block copolymers in toluene, a selective solvent for PS, form spherical micelles. If a small amount of NaOH solution is added to the micelles solution during ultrasonic treatment, organic‐inorganic Janus‐like particles composed of the PS‐b‐P2VP block copolymers and NaOH are generated. After removal of NaOH, block copolymer vesicles are obtained. A possible mechanism for the morphological transition from spherical micelles to vesicles or Janus‐like particles is discussed. If the block copolymer micelles contain inorganic precursors, such as FeCl₃, hybrid vesicles are formed, which may be useful as biological and chemical sensors or nanostructured templates. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 953–959     

Radical‐cured block copolymer‐modified thermosets

Poly(ethylene‐alt‐propylene)‐b‐poly(ethylene oxide) (PEP‐PEO) diblock copolymers were synthesized and added at 4 wt % to 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloxypropoxy)phenyl]propane (BisGMA), a monomer that cures using free radical chemistry. In separate experiments, poly(ethylene glycol) dimethacrylate (PEGDMA) was combined as a secondary monomer with BisGMA and the monomers were loaded with 4 wt % PEP‐PEO. The diblock copolymers self‐assembled into well‐dispersed spherical micelles with PEP cores and PEO coronas. No appreciable change in the final extent of cure of the thermosets was caused by the addition of diblock copolymer, except in the case of BisGMA, where the addition of the block copolymer increased extent of cure by 12%. Furthermore, the extent of cure was increased by 29% and 37% with the addition of 25 and 50 wt % PEGDMA, respectively. Elastic modulus and fracture resistance were also determined, and the values indicate that the addition of block copolymers does not significantly toughen the thermoset materials. This finding is surprising when compared with the large increase in fracture resistance seen in block copolymer‐modified epoxies, and an explanation is proposed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

The pH induced vesicle to micelle morphology transition of a THP‐protected polymer

A diblock copolymer consisting of tetrahydropyranyl acrylate (THPA) as a pH‐deprotectable block, and a permanently hydrophobic block, methyl acrylate, was synthesized by RAFT polymerization using a quaternary amine functionalized, hydrophilic, RAFT chain transfer agent. The polymer self‐assembled in water to form vesicles with D_h = 130 nm, as determined by DLS and cryogenic transmission electron microscopy. Acid catalyzed deprotection of the THPA units to yield acrylic acid resulted in a vesicle to micelle morphology transition, as evidenced by the decrease in hydrodynamic diameter to D_h = 19 nm and the observation of micelles by dry state transmission electron microscopy. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3026–3031     

Dendritic poly(benzyl ether)‐b‐poly(N‐vinylcaprolactam) block copolymers: Self‐organization in aqueous media,thermoresponsiveness and biocompatibility

Four generations of new amphiphilic thermoresponsive linear‐dendritic block copolymers (LDBCs) with a linear poly(N‐vinylcaprolactam) (PNVCL) block and a dendritic poly(benzyl ether) block are synthesized by atom transfer radical polymerization (ATRP) of N‐vinylcaprolactam (NVCL) using dendritic poly(benzyl ether) chlorides as initiators. The copolymers have been characterized by ¹H NMR, FTIR, and GPC showing controlled molecular weight and narrow molecular weight distribution (PDI ≤ 1.25). Their self‐organization in aqueous media and thermoresponsive property are highly dependent on the generation of dendritic poly(benzyl ether) block. It is observed for the LDBCs that the self‐assembled morphology changes from irregularly spherical micelles, vesicles, rod‐like large compound vesicles (LCVs), to the coexistence of spherical micelles and rod‐like LCVs, as the generation of the dendritic poly(benzyl ether) increases. The results of a cytotoxicity study using an MTT assay method with L929 cells show that the LDBCs are biocompatible. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 300–308     

Coarse‐grained molecular dynamics simulation study on spherical and tube‐like vesicles formed by amphiphilic copolymers

Molecular‐level understanding of the vesicular structure and formation process is beneficial for potential vesicle applications, especially in drug delivery. In this article, coarse‐grained molecular dynamics simulation was used to study the self‐assembly behavior of amphiphilic poly(acrylic acid)‐b‐polystyrene copolymers in water at different concentrations and PS/PAA block ratios. It was found that various spherical and tube‐like vesicles formed at PS/PAA 3:3 and 4:2. For spherical vesicles, analysis of vesicular structure indicated that the cavity size was influenced by copolymer concentration and wall thickness by the block ratio. Tube‐like vesicle was formed via the fusion of two spherical vesicles, and a key factor for this morphology is polymer movements between inner and outer layer. This simulation study identifies the key factors governing vesicle formation and structure, and provides a guidance to design and prepare various vesicles for wide applications in drug delivery. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1220–1226     

Preparation of amphiphilic diblock copolymers with pendant hydrophilic phosphorylcholine and hydrophobic dendron groups and their self‐association behavior in water

Generation 3.5 poly(amido amine) dendron (G3.5) with 16 n‐butyl terminal groups containing an acrylamide monomer (AaUG3.5) was prepared by condensation between an amino focal group in G3.5 and 11‐acrylamidoundecanoic acid. AaUG3.5 was polymerized using poly(2‐methacryloyloxyethyl phosphorylcholine) (pMPC)‐based macro‐chain transfer agent via reversible addition‐fragmentation chain transfer (RAFT) radical polymerization to obtain amphiphilic diblock copolymers with different compositions. The diblock copolymers (P_mD_n) were composed of a hydrophilic pMPC block and hydrophobic pendant dendron‐bearing block, where P and D represent pMPC and pAaUG3.5, respectively, and m and n represent the degree of polymerization for each block, respectively. P₂₉₆D₁ and P₉₈D₃ formed vesicles and large compound micelles and vesicles, respectively, which was confirmed by light scattering measurements and transmission electron microscopic (TEM) observations. The large compound micelles formed from P₉₈D₃ could not incorporate hydrophilic guest polymer molecules, because the aggregates did not have a hydrophilic hollow core. In contrast, the vesicles formed from P₂₆₉D₁ could incorporate hydrophilic guest polymer molecules into the hollow core. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4923–4931     

Synthesis of chiral micelles and nanoparticles from amino acid based monomers using RAFT polymerization

Homopolymers of ^tbutyl acrylate (P^tBuA) and a monosubstituted acrylamide (PAM) having an amino acid moiety in the side chain, N‐acryloyl‐(L )‐phenylalanine methyl ester 1 , have been synthesized by Reversible Addition‐Fragmentation Chain Transfer (RAFT) polymerization. Diblock copolymers of these homopolymers were also synthesized by chain extending P^tBuA with monomer 1 and after modification, using simple acid deprotection chemistries of the acrylate block to afford a poly (acrylic acid) block, an optically active amphiphilic diblock copolymer was isolated. The optically active amphiphilic diblock copolymers, which contain chiral amino acid moieties within the hydrophobic segment, were then self‐assembled to afford spherical micelles which were subsequently crosslinked throughout the shell layer to afford robust chiral nanoparticles. The hydrodynamic diameters (D_h) of the block copolymer micelles and nanoparticles were measured by dynamic light scattering (DLS) and the dimensions of the nanoparticles were determined using tapping‐mode atomic force microscopy (AFM) and transmission electron microscopy (TEM). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3690–3702, 2008     

The synthesis and self‐assembly of ABA amphiphilic block copolymers containing styrene and oligo(ethylene glycol) methyl ether methacrylate in dilute aqueous solutions: Elevated cloud point temperatures for thermoresponsive micelles

A series of ABA amphiphilic triblock copolymers possessing polystyrene (PS) central hydrophobic blocks, one group with “short” PS blocks (DP = 54–86) and one with “long” PS blocks (DP = 183–204) were synthesized by atom transfer radical polymerization. The outer hydrophilic blocks were various lengths of poly(oligoethylene glycol methyl ether) methacrylate, a comb‐like polymer. The critical aggregation concentrations were recorded for certain block copolymer samples and were found to be in the range circa 10⁻⁹ mol L⁻¹ for short PS blocks and circa 10⁻¹² mol L⁻¹ for long PS blocks. Dilute aqueous solutions were analyzed by transmission electron microscopy (TEM) and demonstrated that the short PS block copolymers formed spherical micelles and the long PS block copolymers formed predominantly spherical micelles with smaller proportions of cylindrical and Y‐branched cylindrical micelles. Dynamic light scattering analysis results agreed with the TEM observations demonstrating variations in micelle size with PS and POEGMA chain length: the hydrodynamic diameters (D_H) of the shorter PS block copolymer micelles increased with increasing POEGMA block lengths while maintaining similar PS micellar core diameters (D_C); in contrast the values of D_H and D_C for the longer PS block copolymer micelles decreased. Surface‐pressure isotherms were recorded for two of the samples and these indicated close packing of a short PS block copolymer at the air–water interface. The aggregate solutions were demonstrated to be stable over a 38‐day period with no change in aggregate size or noticeable precipitation. The cloud point temperatures of certain block copolymer aggregate solutions were measured and found to be in the range 76–93 °C; significantly these were ∼11 °C higher in temperature than those of POEGMA homopolymer samples with similar chain lengths. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7739–7756, 2008     

Synthesis and self‐assembly of helical polypeptide‐random coil amphiphilic diblock copolymer

Three amphiphilic rod‐coil diblock copolymers, poly(2‐ethyl‐2‐oxazoline‐b‐γ‐benzyl‐L ‐glutamate) (PEOz‐b‐PBLG), incorporating the same‐length PEOz block length and various lengths of their PBLG blocks, were synthesized through a combining of living cationic and N‐carboxyanhydride (NCA) ring‐opening polymerizations. In the bulk, these block copolymers display thermotropic liquid crystalline behavior. The self‐assembled aggregates that formed from these diblock copolymers in aqueous solution exhibited morphologies that differed from those obtained in α‐helicogenic solvents, that is, solvents in which the PBLG blocks adopt rigid α‐helix conformations. In aqueous solution, the block copolymers self‐assembled into spherical micelles and vesicular aggregates because of their amphiphilic structures. In helicogenic solvents (in this case, toluene and benzyl alcohol), the PEOz‐b‐PBLG copolymers exhibited rod‐coil chain properties, which result in a diverse array of aggregate morphologies (spheres, vesicles, ribbons, and tube nanostructures) and thermoreversible gelation behavior. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3108–3119, 2008     

ATRP synthesis and association properties of thermoresponsive anionic block copolymers

Thermosensitive anionic block copolymers of sodium 2‐acrylamido‐2‐methylpropanesulfonate (AMPS) and N‐isopropylacrylamide (NIPAAM) with different block lengths were prepared by atom transfer radical polymerization (ATRP). Controlled polymerization was achieved by using ethyl 2‐chloropropionate (ECP) as initiator and CuCl/CuCl₂/tris(2‐dimethylaminoethyl)amine (Me₆TREN) catalytic system in DMF:water 50:50 (v/v) mixtures at 20 °C. Blocks lengths ranging from 36 to 98 repeating units were obtained. The association properties in aqueous solutions at different NaCl ionic strengths were studied as a function of temperature and polymer concentration by dynamic light scattering, fluorescence spectroscopy, and energy‐filtered transmission electron microscopy. The block copolymers with a higher pNIPAAM/pAMPS ratio formed spherical core‐shell type micelles independently of the ionic strength. The block copolymers with lower pNIPAAM/pAMPS ratio formed core‐shell type micelles at high ionic strength. Larger particles were observed at low ionic strength, which could be due to the formation of vesicles or compound micelles/micellar clusters. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4830–4842, 2008     

Multiple morphologies of the aggregates from self‐assembly of diblock copolymer with relatively long corona‐forming block in dilute aqueous solution

Reported here is self‐assembly behavior in selective solvent of diblock copolymers with relatively long corona‐forming block compared to core‐forming block. Three diblock copolymers, poly(ethylene glycol) monomethyl ether‐b‐poly(methacryloyl‐L ‐leucine methyl ester), also denoted as MPEG‐b‐PMALM copolymer, were prepared by fixing MPEG block with an average number of repeating units of 115, whereas varying PMALM block with an average number of repeating unit of 44, 23, 9, respectively. Multiple morphologies, such as sphere, cylinder, vesicle, and their coexisted structures from self‐assembly of these diblock copolymers in aqueous media by changing block nonselective solvent and initial polymer concentration used in preparation, were demonstrated directly via TEM observation. These results herein might, therefore, demonstrate as an example that a wide range of morphologies can be accessed not only from “crew‐cut micelles” but also from “star‐micelles” by controlling over preparation strategies. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 364–371, 2010     

Disulfide‐centered star‐shaped polypeptide‐PEO block copolymers for reduction‐triggered drug release

Disulfide‐centered star‐shaped poly(ε‐benzyloxycarbonyl‐l ‐lysine)‐b‐poly(ethylene oxide) block copolymers (i.e., A₂B₄ type Cy‐PZlys‐b‐PEO) were synthesized by the combination of ring‐opening polymerization and thiol‐yne chemistry. Their molecular structures and physical properties were characterized in detail by FTIR, ¹H NMR, gel permeation chromatography, differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized optical microscope. Despite mainly exhibiting an α‐helix conformation, the inner PZlys blocks within copolymers greatly prohibited the crystallinity of the outer PEO blocks and presented a liquid crystal phase transition behavior in solid state. These block copolymers Cy‐PZlys‐b‐PEO self‐assembled into nearly spherical micelles in aqueous solution, which had a hydrophobic disulfide‐centered PZlys core surrounded by a hydrophilic PEO corona. As monitored by means of DLS and TEM, these micelles were progressively reduced to smaller micelles in 10 mM 1,4‐dithiothreitol at 37 °C and finally became ones with a half size, demonstrating a reduction‐sensitivity. Despite a good drug‐loading property, the DOX‐loaded micelles of Cy‐PZlys‐b‐PEO exhibited a reduction‐triggered drug release profile with an improved burst‐release behavior compared with the linear counterpart. Importantly, this work provides a versatile strategy for the synthesis of the disulfide‐centered star‐shaped polypeptide block copolymers potential for intracellular glutathione‐triggered drug delivery systems. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2000–2010     

Synthesis and characterization of temperature‐sensitive block‐graft PNiPAAm‐b‐(PαN3CL‐g‐alkyne) copolymers by ring‐opening polymerization and click reaction

This study synthesized thermo‐sensitive amphiphilic block‐graft PNiPAAm‐b‐(PαN₃CL‐g‐alkyne) copolymers through ring‐opening polymerization of α‐chloro‐ε‐caprolactone (αClCL) with hydroxyl‐terminated macroinitiator poly(N‐isopropylacrylamide) (PNiPAAm), substituting pendent chlorides with sodium azide. This was then used to graft various kinds of terminal alkynes moieties by means of the copper‐catalyzed Huisgen's 1,3‐dipolar cycloaddition (“click” reaction). ¹H NMR, FTIR, and gel permeation chromatography (GPC) was used to characterize these copolymers. The solubility of the block‐graft copolymers in aqueous media was investigated using turbidity measurement, revealing a lower critical solution temperature (LCST) in the polymers. These solutions showed reversible changes in optical properties: transparent below the LCST, and opaque above the LCST. The LCST values were dependant on the composition of the polymer. With critical micelle concentrations (CMCs) in the range of 2.04–9.77 mg L^?1, the block copolymers formed micelles in the aqueous phase, owing to their amphiphilic characteristics. An increase in the length of hydrophobic segments or a decrease in the length of hydrophilic segments amphiphilic block‐graft copolymers produced lower CMC values. The research verified the core‐shell structure of micelles by ¹H NMR analyses in D₂O. Transmission electron microscopy was used to analyze the morphology of the micelles, revealing a spherical structure. The average size of the micelles was in the range of 75–145 nm (blank), and 105–190 nm (with drug). High drug entrapment efficiency and drug loading content were observed in the drug micelles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and self‐assembly in water of coil‐rod‐coil amphiphilic block copolymers with central π‐conjugated sequence

The purpose of this study is to correlate the nano‐organization in water of coil‐rod‐coil amphiphilic block copolymers constituted of a conjugated segment to their optoelectronic properties. The ABA block copolymer structures, easily achieved via coupling reactions, are based on conjugated rod of dihexylfluorene and 3,4‐ethylenedioxythiophene units linked to two flexible poly(ethylene oxide) or poly[(ethylene oxide)‐ran‐(propylene oxide)] chains. These well‐defined copolymers exhibited a range of specific morphologies in water, a good solvent of coil blocks and a bad solvent of the conjugated rod. Particularly, vesicles and micelles with spherical, cylindrical, or elongated shape were noticed. Correlations were attempted to be established between the weight percent of the conjugated sequence contained in the copolymers, the morphology of the nanostructures obtained by self‐assembly in solution and the resulting optical properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4602–4616, 2008     

Hybrid organic–inorganic block copolymer nano‐objects from RAFT polymerization‐induced self‐assembly

A simple route to organic–inorganic (O/I) nano‐objects with different morphologies through polymerization‐induced block copolymer self‐assembly is described. The synthetic strategy relies on the chain‐extension of polyhedral oligomeric silsesquioxanes (POSS)‐containing macro‐CTA (PMAiBuPOSS₁₃ and PMAiBuPOSS₁₉) with styrene at 120 °C in octane, a selective solvent of the POSS‐containing block. The polymerization system was proven to afford a plethora of O/I nano‐objects, such as spherical micelles, cylindrical micelles, and vesicles depending on the respective molar masses of the PMAiBuPOSS and polystyrene (PS) blocks. The cooling procedure was also proven to be a crucial step to generate particles with a unique morphology. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4558–4564     

Nanostructured hybrid polymer networks from in situ self‐assembly of RAFT‐synthesized POSS‐based block copolymers

A series of well‐defined hybrid block copolymers PMACyPOSS‐b‐PMMA and PMAiBuPOSS‐b‐PMMA exhibiting high POSS weight contents have been synthesized by RAFT polymerization and further studied as modifiers for epoxy thermosets based on diglycidyl ether of bisphenol A. The hybrid block copolymers self‐assembled within the epoxy precursors into micelles possessing an inorganic core and a PMMA corona. Thanks to the presence of the PMMA blocks that remain miscible until the end of the reaction, curing of the resulting blends afforded nanostructured hybrid organic/inorganic networks with well‐dispersed inorganic‐rich nanodomains with diameters on the order of 20 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011