Flame retardancy and smoke suppression of silicone foams with microcapsulated aluminum hypophosphite and zinc borate

The flame‐retardant microcapsules were successfully fabricated with an aluminum hypophosphite (AHP) core. Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS) were used to verify that AHP was encapsulated in the microcapsules, and thermogravimetry analysis showed that microencapsulated AHP (MAHP) possessed higher thermal stability than that of AHP. Then, a flame‐retardant and smoke suppression system for silicone foams (SiFs) was obtained through a synergistic effect of MAHP and zinc borate (2ZnO·3B₂O₃·3.5H₂O). The mechanical properties, flame retardance, and smoke suppression of SiFs with MAHP and zinc borate were tested using the tensile test, limiting oxygen index (LOI) test, UL‐94 test, and cone calorimeter test. The mechanical properties indicated that the tensile strength and elongation at break of SiFs could evidently improve with the incorporation of MAHP. Compared with pure SiF, SiF8 with 4.5‐wt% MAHP and 1.5‐wt% zinc borate could achieve an LOI value of 30.7 vol% and an UL‐94 V‐0 rating, the time to ignition amplified almost six times, the peak heat release rate and total heat release were 51.10% and 46.00% less than that of pure SiF, respectively, the fire performance index increased nearly 13 times, and the fire growth index value was only 13.18% of pure SiF. Moreover, the partial substitution of zinc borate imparted a substantial improvement in both flame retardancy and smoke suppression. Especially, the peak smoke production rate and total smoke production of SiF8 were merely 38.46% and 38.84% of pure SiF.     

Flammability of radiation cross-linked low density polyethylene as an insulating material for wire and cable

Various formulations of low-density polyethylene blended with ethylene vinyl acetate were prepared to improve the flame retardancy for wire and cable applications. The prepared formulations were cross-linked by γ-rays to 50, 100, 150 and 200 kGy in the presence of trimethylolpropane triacrylate (TMPTA). The effect of thermal aging on mechanical properties of these formulations were investigated. In addition, the influence of various combinations of aluminum trihydroxide and zinc borate as flame retardant fillers on the flammability was explored. Limiting oxygen index (LOI) and average extent of burning were used to characterize the flammability of investigated formulations. An improved flame retardancy of low density polyethylene was achieved by various combinations of flame ratardant fillers and cross-linking by gamma radiation.     

Effect of ammonium polyphosphate and fillers on flame retardant and mechanical properties of recycled PET injection molded

Ammonium polyphosphate (APP) and inorganic fillers were applied for improving flame retardancy and mechanical performance of recycled poly(ethylene terephthalate) (RPET). RPET was compounded with 5–10 wt% of talc and glass bead using twin screw extruder then were injection molded with 2 wt% of APP. The effects of fillers contents and APP on properties and flame retardancy of RPET composites were investigated. The incorporation of talc and glass bead as well as the adding of APP significantly improved tensile and flexural modulus of RPET composites. Scanning electron microscope micrographs indicated good distribution of talc, while glass bead was agglomerated on the RPET matrix. Flame‐retardant property of neat RPET and the RPET composites revealed V‐2 of UL‐94 flammability rating. It can be noted that the composites were less dripping because of the synergistic effect of adding talc and glass bead with APP. From thermogravimetric analysis results, larger of residual char contents and lower values of the activation energy were considered for enhancing flame retardancy in the RPET composites. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of MoO3 with different morphologies and their effects on flame retardancy and smoke suppression of polyurethane elastomer

Molybdenum trioxide (MoO₃) microrods, nanofibers, and nanoplates were synthesized via the hydrothermal method and high‐temperature calcination method, respectively. Then the MoO₃ was added into polyurethane elastomer, respectively. The flame retardancy and smoke suppression of the composites added with different MoO₃ were studied by thermal gravimetric analysis, cone calorimeter, and smoke density. The results show that the three kinds of MoO₃ with different morphologies could promote the formation of char and possess flame retardancy and smoke suppression, and MoO₃ nanofibers exhibit a higher degree of flame retardancy, and 1 wt% addition could make the peak heat release rate of polyurethane elastomer composites reduce from 881.6 kW m^?2 for a pure sample to 343.4 kW m^?2, a decrease by 61.0%. As for smoke suppression, MoO₃ nanoplates possess the best smoke suppression; 5 wt% could decrease a pure sample's smoke density by 41.3% from 361 to 212. Moreover, the char residue of composites after combustion was analyzed by Raman spectra and X‐ray photoelectron spectroscopy, and the flame retardancy and smoke suppression mechanisms of MoO₃ were discussed.     

A novel graphene hybrid for reducing fire hazard of epoxy resin

Epoxy resin (EP) is more and more important in many fields, but its application is limited due to the inflammability in air of EP. Therefore, reducing the fire hazard of EP is necessary. In this work, a kind of hybrid flame retardant (α‐ZrP‐RGO) consisting of a 2‐dimensional inorganic reduced graphene oxide (RGO) modified with a planar‐like α‐zirconium phosphate (α‐ZrP) particles was prepared successfully via 1‐step hydrothermal method. The effects of α‐ZrP‐RGO on the thermal performance, flame retardancy, and smoke suppression of EP were investigated by preparing EP composites containing both EP and α‐ZrP‐RGO. Thermogravimetric results revealed that α‐ZrP‐RGO could improve the char yield of EP at 700°C obviously. In addition, compared with pure EP, the peak heat release rate and the total heat release of EP composites were decreased significantly, while the limited oxygen index of EP composites was increased. Meanwhile, the smoke production rate of EP composites was reduced obviously with the addition of α‐ZrP‐RGO. The enhanced flame retardancy and smoke suppression of EP composites were mainly attributed to not only the physical barrier effect of both α‐ZrP and RGO but also the catalytic effect of α‐ZrP during the combustion process of EP composites.     

纳米LDH对环氧树脂燃烧的抑烟作用

水滑石;阻燃;纳米LDH对环氧树脂燃烧的抑烟作用     

Flame-retardancy and Smoke-suppression Studies on Ferrocene Derivatives in PVC

A range of substituted ferrocenes has been synthesized and studied for flame retardancy and smoke suppression on incorporation into plasticized PVC at 0.1–5.0 phr. Smoke suppression by up to 50 and enhancement of the limiting oxygen index by up to 4 units were observed. The differences in performance could not be correlated with char formation, thermal analysis or chemical structure of the additive. A negative correlation was found between smoke suppression and flame retardancy. The most effective smoke suppressant additive appears to accelerate the rate of dehydrochlorination of PVC while the most effective flame retardant appears to have little effect on the dehydrochlorination process.     

Preparation of a novel phosphorus‐containing organosilicon and its effect on the flame retardant and smoke suppression of polyethylene terephthalate

A novel phosphorus‐containing silicone flame retardant (PDPSI) was prepared by Mannish reaction, and a series of PDPSI/PET composites were prepared by melt blending method. The nuclear magnetic resonance (¹H NMR), Fourier transformation infrared (FTIR), and the thermogravimetric analyzer (TGA) results indicated that PDPSI showed network structure and owned good thermal stability, with the char residue of 62.2% at 800°C. The flame retardancy of PDPSI/PET composites was characterized by limiting oxygen index (LOI), vertical burning tests (UL‐94), and cone calorimeter (CCT). The results revealed that the addition amount of PDPSI was 5%, the LOI value of PDPSI/PET composites increased to 27.3%, and UL‐94 test passed V‐0 rating. When the PDPSI loading was 3%, PET composites showed excellent flame retardancy and smoke suppression, with a decrease in the peak heat release rate (PHRR) by 71.19% and the total smoke release (TSP) reduced from 14.4 to 11.1m². The scanning electron microscopy (SEM) and FTIR results of char residue demonstrated that the flame‐retardant mechanism of PDPSI was solid phase flame retardant. PDPSI catalyzed the aromatization reaction of PET to promote the formation of a dense and continuous carbon layer, finally improving the flame retardancy and smoke suppression properties of PET.     

Phosphorus‐free boron nitride/cerium oxide hybrid: A synergistic flame retardant and smoke suppressant for thermally resistant cyanate ester resin

Establishing a phosphorus‐free strategy to fabricate high‐performance thermosetting resins owning outstanding thermal resistance, good flame retardancy, and smoke suppression is important for sustainable development. Herein, a unique phosphorus‐free hybrid (BN@CeO₂) was synthesized through chemically grafting cerium oxide (CeO₂) on surface of exfoliated boron nitride (BN) nanosheet with the aids of γ‐aminopropyltriethoxysilane and polydopamine coating, which was then embedded into bisphenol A cyanate ester (BCy) resin to fabricate new BN@CeO₂/BCy composites with high thermal resistance. Compared with BCy resin, the BN@CeO₂/BCy composite with 4 wt% BN@CeO₂ not only has delayed initial ignition time by 23 seconds but also severally shows 58.1%, 23.1%, and 44.4% lower smoke produce rate, total heat release, and peak heat release rate. The study on mechanism behind outstanding flame retardancy reveals that the improved heat resistance and flame retardancy of BN@CeO₂/BCy composite are attributed to multiply effects induced by BN@CeO₂ and its interaction with BCy resin; specifically, these effects come from BN (physical barrier) and CeO₂ (free radical trapping effect and catalytic char layer formation) as well as those from the synergistic effect of BN and CeO₂. These excellent comprehensive properties of BN@CeO₂/BCy composites demonstrate that BN@CeO₂ is an environment‐friendly and synergistic modifier for developing heat‐resisting thermosetting resins with outstanding flame retardancy and smoke suppression.     

Zeolitic imidazolate frameworks‐8 modified graphene as a green flame retardant for reducing the fire risk of epoxy resin

A novel hybrid material of ZIF‐8/RGO (zeolitic imidazolate frameworks‐8 loaded the surface of graphene) was synthesised by a simple method and characterized. Then, ZIF‐8/RGO was added into epoxy resin (EP), and the flame retardancy and smoke suppression of the EP composites were studied. Compared with pure EP, the peak heat release rate and the total heat release of the EP composites were reduced remarkably, and their LOI and UL94 vertical burning rating were also improved. In addition, their smoke production rate and total smoke production were decreased drastically. The improved flame retardancy and smoke suppression were mainly attributed to the physical barrier effect of graphene. Meanwhile, the metal oxide decomposed from ZIF‐8 could contribute to the production of char residue and enhance the compactness of the char layer.     

Flame retardancy and charring behavior of polystyrene‐organic montmorillonite nanocomposites

The fire performance of polystyrene‐organic montmorillonite (OMMT) nanocomposite was investigated by limiting oxygen index (LOI) and cone calorimetry. Scanning electron microscopy, electron dispersive spectroscopy and attenuated total reflection Fourier transform infrared spectroscopy were employed to study the charring process of the nanocomposite. The residue collected upon thermal degradation was analyzed by various means to determine its composition and to understand the flame‐retardant mechanism of the nanocomposite. It has been shown that the introduction of OMMT does not have much influence on LOI of the nanocomposite, but can greatly decrease the heat release rate (HRR) and mass loss rate (MLR) and enhance the flame retardancy of the material. The flame‐retardant mechanism is due to charring in the condensed phase. The intercalated nanostructure is destroyed, and the silicate nanolayers in the nanocomposite rearrange and accumulate on the material surface during pyrolysis. The charred residue has a honeycomb‐like porous structure, which covers on the material surface and serves as a protection barrier against heat transfer and mass exchange, leading to enhanced flame retardancy. The charred residue is composed of pyrolyzed silicate layers and graphitic char. The char is highly stable in nitrogen even at 800 °C, but thermo‐oxidative decomposition is allowed, and it can be removed completely in the presence of air. Due to the porous structure of the charred residue, the protection from it is mainly to reduce the HRR and MLR and retard burning of the material. It is not enough to make the nanocomposite self‐extinguish. Copyright © 2012 John Wiley & Sons, Ltd.     

Study on syntheses of phosphates and transition‐metal complexes on viscose rayon felt for flame retardancy

High‐performance materials for flameproofing, phosphates (polyphosphate and ammonium phosphate) were synthesized on viscose rayon felt. This surface reaction has the advantage of a nonblooming effect and an application in thermosetting plastics. Metal complexes have the effect of reducing the amount of smoke. Therefore, in the second step, transition‐metal complexes were synthesized on the viscose rayon ammonium phosphate felt. This article focuses on the surface modification of phosphates and metal complexes on viscose rayon. All reactions were confirmed by attenuated total reflectance Fourier transform infrared and time‐of‐flight secondary ion mass spectrometry. As the concentrations of phosphoric acid and urea increased, the peak intensities of ammonium ion groups and phosphate groups greatly increased. The thermal properties of the synthesized materials were studied with thermogravimetric analysis and oxygen index testing. On the basis of the experimental results, the synthesized flame‐retardancy materials showed excellent physicochemical and thermal effects and flame retardancy. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2815–2823, 2000     

Polyurethane-zinc borate composites with high oxidative stability and flame retardancy

Novel polyurethane zinc borate composites were prepared with the main aim to increase the flame retardancy of the polyurethane. It was discovered that the zinc borate had very significant effects on the oxidative stability of the neat polymer which was first observed by oxygen induction time tests and supported with actual weathering chamber tests. The oxidative stability of zinc borate-filled polyurethane was compared with the polyurethane stabilized with a commercial light stabilizer, Tinuvin B75 from Ciba SC. The performance of zinc borate-filled polyurethane was much better, as shown by oxygen induction time and weathering chamber tests. Additionally the flame retardancy was measured and significant flame retardancy was achieved. Mechanical tests, thermogravimetric analysis and scanning electron microscope studies were performed to characterize the products.     

Synthesis of a triazine-based macromolecular hybrid charring agent containing zinc borate and its flame retardancy and thermal properties in polypropylene

Abstract

A triazine-based macromolecular hybrid charring agent containing zinc borate (MCA-K-ZB) was synthesized and combined with ammonium polyphosphate (APP) to improve the flame retardancy of polypropylene (PP). The flame retardancy and thermal properties of PP composites were investigated using limited oxygen index, vertical burning test, and thermogravimetric analysis. The results showed APP/MCA-K-ZB can improve the flame retardancy of PP compared with APP/MCA-K/ZB. The morphology of the char residues was investigated by scanning electron microscopy (SEM). The SEM result shows that MCA-K-ZB can improve the compactness and continuity of char residue compared with MCA-K/ZB, therefore improving the flame retardancy of PP composites.     

Metal‐organic framework MIL‐53 (Fe)@C/graphite carbon nitride hybrids with enhanced thermal stability,flame retardancy,and smoke suppression for unsaturated polyester resin

Metal‐organic framework MIL‐53 (Fe)@C/graphite carbon nitride hybrid (MFeCN), a novel flame retardant, was synthesized by hydrothermal reaction and subsequently added into unsaturated polyester resin (UPR). The structure, morphology, and thermal stability of MFeCN were characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), and thermogravimetric analysis (TG). The thermal stability and flammability of the UPR composites were characterized by TG and cone calorimeter tests (CCT). The results of CCT demonstrated that the peak heat release rate (pHRR), total heat release (THR), peak smoke production rate (pSPR), and total smoke production (TSP) of UPR/MFeCN‐4 were reduced by 39.8%, 10.2%, 33.3%, and 14.5%, respectively, comparing with UPR. The results of TG and CCT indicated that MFeCN could improve the thermal stability, flame retardancy, and smoke suppression properties of the UPR composites. The residues after CCT were then characterized by laser Raman spectroscopy (LRS), XPS, and SEM. Finally, based on the above experimental results and analysis, the flame retardancy mechanism of MFeCN was proposed.     

Synergistic flame‐retardant effect of DOPO‐based derivative and organo‐montmorillonite on glass‐fiber‐reinforced polyamide 6 T

Herein, a bridged 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) derivative (PN‐DOPO) in combination with organ‐montmorillonite (OMMT) was used to improve the flame retardancy and mechanical properties of glass‐fiber‐reinforced polyamide 6 T (GFPA6T). The flame retardancy and thermal stabilities of the cured GFPA6T composites were investigated using limiting oxygen index, vertical burning (UL‐94) test, cone calorimeter test, and thermogravimetric analysis (TGA). The morphological analysis and chemical composition of the char residues after cone calorimeter tests were characterized via scanning electron microscopy and energy dispersive spectrometry. The results indicate that 2 wt% OMMT combined with 13 wt% PN‐DOPO in GFPA6T achieved a V‐0 rating in UL‐94 test. The peak heat release rate and total smoke release remarkably decreased with the incorporation of OMMT as compared to those of GFPA6T/15 wt% PN‐DOPO. The TGA results show that the thermal stability and residual mass of the samples effectively increased with the increase in OMMT content. The morphological analysis and composition structure of the residues demonstrate that a small amount of OMMT could help form a more thermally stable and compact char layer during combustion. Also, with the incorporation of OMMT, the layers consisted of more carbon‐silicon and aluminum phosphate char in the condensed phase. Furthermore, GFPA6T/PN‐DOPO/OMMT composites exhibited excellent mechanical properties in terms of flexural modulus, flexural strength, and impact strength than the GFPA6T/PN‐DOPO system. The combination of PN‐DOPO and OMMT has improved the flame retardancy and smoke suppression of GFPA6T without compromising the mechanical properties.     

Studies on the properties of polypropylene with a new silicon‐containing intumescent flame retardant

A new intumescent flame retardant (PSiNII), which contains silicon, phosphorus, and nitrogen elements, has been synthesized and incorporated into polypropylene (PP). Its effect on the properties of PP is investigated based on flame retardancy, thermal properties, mechanical properties, and morphologies. The flame retardancy is evaluated by the limiting oxygen index value. The thermal properties (oxidative behaviors and thermal stability) are investigated by thermogravimetric analysis under nitrogen and air atmosphere. The mechanical properties are researched based on the maximum tensile stress and relative strain at break. The morphologies of PP/PSiNII are studied by the scanning electron micrograph. Their flame retardancy and thermal stability are improved by introducing PSiNII. PP/PSiNII blends can achieve high fire performance and keep high mechanical property at the same time. During a fire, the melt‐dripping behaviors of PP‐containing PSiNII are improved. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2548–2556, 2005     

Effects of kaolin on the thermal stability and flame retardancy of polypropylene composite

Kaolin clay was introduced into an intumescent flame retardant (IFR) system containing ammonium polyphosphate as an acid source and pentaerythritol as a carbonization agent in order to improve the thermal stability and flame retardancy of polypropylene (PP) composite. The flame retardancy and smoke suppression was evaluated by the limiting oxygen index, vertical burning UL‐94, and cone calorimeter (CONE) tests. The limiting oxygen index value was increased from 30 to 33 at the presence of 2 phr kaolin. The peak heat release rate value decreased from 1002 kW/m² of neat PP to 318 kW/m² of PP/40 phr IFR and then to 222 kW/m² of PP/38 phr IFR/2 phr kaolin. The time of the peak heat release rate was significantly prolonged after the introduction of kaolin. The morphology of char after combustion was characterized by a scanning electron microscope, and it revealed more compact char structure that was obtained at the presence of kaolin. The mechanism of kaolin on improving the retardancy and smoke suppression of PP/IFR composite was proposed on the basis of X‐ray photoelectron spectroscopy analysis. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation, properties and characterizations of halogen-free nitrogen-phosphorous flame-retarded glass fiber reinforced polyamide 6 composite

Halogen free nitrogen-phosphorous flame retardants (PMOP) were prepared through reaction of melamine and polyphosphoric acid in the presence of flame retardant modifier CM with silicotungistic acid as a catalyst in aqueous solution. FT-IR, XRD, DSC and TGA techniques were used to characterize the reaction product PMOP. The obtained flame retardants were then used to prepare flame retardant (FR) polyamide 6 (PA6) composite reinforced with glass fiber (GF) and the factors affecting the flame retardancy of the material were also investigated. The FR GF reinforced PA6 composite and the obtained charred layers were analyzed by utilizing TGA, SEM, FT-IR and XRD. The properties of the charred layer were connected with the flame retardancy of the corresponding material to reveal the flame retarding mechanism of FR GF reinforced PA6 composite. The experimental results show that PMOP flame retardant consists of melamine polyphosphate, melamine phosphate and possible melamine pyrophosphate. The presence of CM was found to improve the flame retardancy of FR GF reinforced PA6 composite. It was experimentally found that PMOP flame retardant, which is comparatively stable in the range of processing temperatures of PA6, is particularly suitable for flame retarding PA6 reinforced with GF. With increasing the flame retardant content, the flame retardancy of the FR reinforced material is not improved so obviously. However, the increase in the GF content greatly improves the flame retardancy of the composite, because GF greatly increases the char yield of material, decreases the maximal thermal decomposition rate, promotes the formation of charred layer with (PNO)_x structure and greatly increases the strength of the charred layer. The prepared FR GF reinforced PA6 composites have good comprehensive properties with flame retardancy 1.6 mm UL 94 V-0 level, tensile strength 76.8 MPa, Young's modulus 11.7 GPa, Izod notched impact strength 4.5 kJ/m², flexural strength 98.0 MPa and flexural modulus 7.2 GPa, showing a better application prospect.     

Effect of a triazine ring‐containing charring agent on fire retardancy and thermal degradation of intumescent flame retardant epoxy resins

A triazine ring‐containing charring agent (PEPATA) was synthesized via the reaction between 2,6,7‐trioxa‐l‐phosphabicyclo‐[2.2.2]octane‐4‐methanol (PEPA) and cyanuric chloride. It was applied into intumescent flame retardant epoxy resins (IFR‐EP) as a charring agent. The effect of PEPATA on fire retardancy and thermal degradation behavior of IFR‐EP system was investigated by limited oxygen index (LOI), UL‐94 test, microscale combustion calorimetry (MCC), thermogravimetric analysis (TGA) and thermogravimetric analysis/infrared spectrometry (TG‐IR). The glass transition temperatures (T_g) of IFR‐EP systems were studied by dynamic mechanical analysis (DMA). The LOI values increased from 21.5 for neat epoxy resins (EPs) to 34.0 for IFR‐EP, demonstrating improved flame retardancy. The TGA curves showed that the amount of residue of IFR‐EP system was largely increased compared to that of neat EP at 700 °C. The new IFR‐EP system could apparently reduce the amount of decomposing products at higher temperatures and promotes the formation of carbonaceous charred layers that slowed down the degradation. Copyright © 2010 John Wiley & Sons, Ltd.