Crystallinity of adsorbed EVA nanofilms: relevance to confinement and interfacial interactions

We used infrared spectroscopy to estimate the crystalline component concentration in thin films of ethylene‐co‐vinyl acetate (EVA) copolymers spin‐coated on gold and functionalized substrates. Bulk calibration methods are elaborated that allow the establishment of quantitative relationships between infrared response and the degree of crystallinity via simple equations. These equations are applied and transposed to the study of thin films in such a way as to avoid preferential orientation effects induced by adsorption. Therefore, for calibration we select groups that vibrate in the same direction and belong to the crystalline phase. Our results show a decrease of the crystalline amount in EVA9, 14, 24 and 28 thin films, as determined on the basis of infrared spectroscopy experiments. The low crystallinity degree calculated for EVA thin films is in good agreement with the reduced crystalline morphology observed by atomic force microscopy. Observed amorphization is considered to be induced by confinement (gold substrates) and interfacial interactions (functionalized substrates), which lead to a disordered chain conformation that makes crystallization less favourable. Copyright © 2003 John Wiley & Sons, Ltd.     

Confinement of polystyrene at interfaces: Consequences on chain orientation

The knowledge of the structure and orientation of polymer chains adsorbed at an interface could be of major importance to predict the level of interfacial interactions and adhesion that depend strongly on the properties of the interface formed between the two materials (polymer and substrate) brought into contact. In this work, we were interested to study thin films of atactic polystyrene after adsorption (spin‐coating) on two chemically different substrates (inert and OH‐grafted gold substrates). The main aim is to analyze the resulting anisotropy due to the confinement in a quasi‐bidimensional geometry, as well as to investigate the incidence of the interfacial interactions, potentially established between the polymer and the surface, on the chain organization. Our infrared spectroscopy results allowed us to access the adsorption model of polystyrene chains and to highlight the relation between chain orientation and interfacial acid–base interactions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1268–1276, 2006     

Efficient carbonyl hydrosilylation reaction: Toward EVA copolymer crosslinking

In this article, the hydrosilylation reaction of carbonyl groups of acetate derivatives and SiH groups of hydride‐terminated polydimethylsiloxane at high temperature (100–130 °C) are described. Triruthenium dodecacarbonyl, Ru₃(CO)₁₂, was used as effective catalyst for hydrosilylation reaction. The hydrosilylation reactions with octyl acetate and 4‐heptyl acetate were investigated by multinuclear NMR spectroscopy (¹H, ¹³C, and ²⁹Si). This work provides evidence of the addition reaction of SiH groups onto carbonyl groups. The influence of the nature of the acetate structure on the reaction kinetics was shown and the slight contribution of side reactions at high temperature highlighted. Hydrosilylation reaction was extent to the crosslinking of ethylene‐vinyl acetate (EVA) copolymer in the same range of temperature. The formation of EVA chemical network was demonstrated by HR‐MAS NMR spectroscopy and by measuring the gel fraction of EVA chains in hot toluene. From Flory theory, the crosslinking density of elastic strand was calculated to be 80 mol m^?3 in agreement with the measurements from swelling ratio (VA/SiH molar ratio: 11.8). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Evidence of electron acceptor - electron donor interactions in thermoplastic polymer blends by using FTIR - ATR spectroscopy

Specific interactions in binary blends of ethylene/vinyl acetate copolymer (EVA) with various low molecular weight terpene-phenol tackifying resins (TPR) were systematically investigated, as a function of the composition of the blend and of the electron-acceptor ability of the resin, by using attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy. Molecular acid-base were evidenced between TPR hydroxyl groups and EVA carbonyl groups. Quantitative information on the fraction of acid-base bonded entities, the enthalpy and the equilibrium constant of pair formation were obtained. A crystalline transition of the EVA copolymer is observed and is discussed in terms of enthalpy and entropy considerations based on FTIR and calorimetric differential scanning calorimetry (DSC) investigations. Fundamental results are then summarized in order to predict the interfacial reactivity of such polymer blends towards acid or basic substrates.     

Effect of vinyl acetate content and electron beam irradiation on the flame retardancy, mechanical and thermal properties of intumescent flame retardant ethylene-vinyl acetate copolymer

Ethylene vinyl acetate copolymer (EVA) flame retarded by ammonium polyphosphate (APP) and pentaerythritol (PER) was cross-linked by electron beam irradiation. The effects of vinyl acetate content and electron beam irradiation on the flame retardancy, mechanical and thermal properties of EVA composites were investigated. The volatilized products of EVA/APP/PER composites were characterized by thermogravimetric analysis/infrared spectrometry. As VA content increased, the volatilized products increased in the second decomposition step, but decreased in the third decomposition step. For all samples, the increase of irradiation dose could improve both the gel content and the Limit Oxygen Index (LOI, the minimum oxygen concentration by volume for maintaining the burning of a material) values of irradiated composites. The mechanical and thermal properties of the irradiated EVA composites were also evidently improved at appropriate irradiation dose as compared with those of unirradiated EVA composites, whereas these properties decrease at higher irradiation dose because of the electron beam irradiation-induced oxidative degradation or chain scission.     

Infrared reflectance as a tool to reveal preferential molecular orientation of polymers adsorbed onto flat substrates

FTIR-Reflectance experiments have been made on thin ethylene-vinyl acetate (EVA) copolymer layers deposited on aluminum mirrors in order to determine orientation of polymer functional groups at the interface. This was accomplished by using various reflection angles under p polarization state of the incident IR beam. Film thicknesses were estimated by ellipsometric experiments. Kramers-Kronig analysis is first applied to the external infrared reflection spectrum from a single copolymer surface measured near the normal incidence angle. Absorption spectra, k(v), are then deduced and used to calculate specular reflectance intensities of the functional groups of interest as a function of incidence angle, polarization state and film thickness. The calculated values are compared to those observed. A layer model is developed, which allows the molecular orientation of both EVA carbonyl groups and the main chain axis at the interface to be determined. Only carbonyl groups involved in specific electron donor-electron acceptor interactions at the interface appear to be subject to specific orientation. A persistence thickness of the preferential orientation in the film is determined, also from which it is concluded that even in nanofilms, preferential molecular orientation induced by an hydroxylated substrate does not persist throughout the film thickness. It is localized at a near interfacial region, the thickness of which depends on the ability of the comonomer to undergo conformational changes.     

Evaluation of Flow Ability Response in EVA Emulsion Preparation with Different Vinyl Acetate Percentage by Intrinsic Viscosity Measurement

Ethylene–vinyl acetate (EVA) copolymers were chosen for this work because they show different characteristics depending on their vinyl acetate (VA) percentage. EVA has a wide range of applications, including coating of photovoltaic cells and covering of tires and cables, as a consequence of the different varieties of the material depending on the VA percentage. To date, no study has been conducted yet to determine the relationship between VA percentage and the flow ability response of an emulsion. Previous studies commonly highlighted the effect of particle size and emulsifier concentration on the emulsion process, but none of these studies directly discussed the effect of VA percentage of an EVA copolymer on the flow ability response of an emulsion. In this study, correlation between polymer-interaction was studied through measurement of intrinsic viscosity     

FTIR studies of polar interactions in polymer blends

Specific interactions in binary blends of poly(vinyl chloride) (PVC) with ethylene–vinyl acetate copolymers (EVA) and ethylene-methyl acrylate copolymers (EMA) were investigated by observation of band shifts of the carbonyl absorption using ATR-FTIR spectroscopy at variable temperature. Blends of PVC with EVA and EMA could be prepared as heterogeneous, homogeneous or metastable homogeneous mixtures, depending on the copolymer composition. The miscible systems as well as the heterogeneous ones showed only very small or no band shifts. The metastable blends exhibited shifts of several wave numbers to lower values, which vanished at higher temperatures as the blends demixed. Strong interactions in the metastable blends could be related to good impact properties of the corresponding two-phase systems.     

Conducting composites from EPDM–EVA blends

The effect of ethylidene norbornene (ENB) content of ethylene propylene aiene rubber (EPDM) and vinyl acetate (VA) content of ethylene vinyl acetate copolymer (EVA), as well as the blending sequence, on the conductivity of composites based on EPDM–EVA–carbon black have been studied. Black master batches show a lower extent of cure than the preblended system followed by black addition. EPDM having a high ENB content shows higher conductivity under ambient conditions. Preblended systems give rise to higher conductivity in the case of low-ENB content EPDM. But for high-ENB content EPDM, the blending of black master batches imparts high conductivity. Two types of conduction are observed in this case and the transition temperature depends on the VA content of EVA. It appears that there exists a correlation between activation energy of curing and that of conduction.     

Thermodynamic properties of some concentrated polymer solutions

Solubilities of several solvents were measured in four molten polymers by using an isobaric vapor-pressure apparatus. Solvent concentration ranged from 0.5 to 15 wt-%. The systems polyisoprene–benzene and polyisobutylene–benzene were studied at 80.0°C; polyisobutylene–cyclohexane was studied at 100.0°C; ethylene–vinyl acetate copolymer (EVA)–cyclohexane, EVA–isooctane, and poly(vinyl acetate)–isooctane were studied at 110.0°C. Of six polymer–solvent systems studied, all except poly(vinyl acetate)–isooctane appear to exhibit hysteresis in a single sorption–desorption cycle starting with dry polymer. The desorption curves of solvent activity plotted versus solvent weight fraction show an inflection point, suggesting localized adsorption of solvent molecules. Experimental data were analyzed with a theory which takes into account adsorption of solvent by polymer in addition to differences in free volumes and intermolecular forces. The theory gives a semiquantitative representation of the experimental data.     

Kinetic Study of the Accelerating Effect of Coal-burning Additives on the Combustion of Graphite

The relationship between copolymer composition and transition temperatures was studied by means of differential scanning calorimetric analysis and dynamic mechanical spectroscopy. Six samples of ethylene vinyl acetate (EVA) copolymers containing from 5 to 40 mass per cent of vinyl acetate (VA) were studied. The differential scanning calorimetric analysis revealed that each EVA copolymer displays two endothermic peaks (T_m1 and T_m2 ) in the melting zone. Dynamic mechanical spectroscopy was used to determine the primary relaxation temperature (T_α ) for EVA copolymers. This latter characteristic is relatively insensitive to the level of vinyl acetate contained in the copolymer and is influenced by the pulsation frequency ω, also named the angular frequency. This revised version was published online in July 2006 with corrections to the Cover Date.     

Spectroscopic Monitoring of the Acidity of Water Films on Ru(0001): Orientation‐Specific Acidity of Adsorbed Water

We examined the acid–base properties of water films adsorbed onto a Ru(0001) substrate by using surface spectroscopic methods in vacuum environments. Ammonia adsorption experiments combined with low‐energy sputtering (LES), reactive ion scattering (RIS), reflection–absorption infrared spectroscopy (RAIRS) and temperature‐programmed desorption (TPD) measurements showed that the adsorbed water is acidic enough to transfer protons to ammonia. Only the water molecules in an intact water monolayer and water clusters larger than the hexamer exhibit such acidity, whereas small clusters, a thick ice film or a partially dissociated water monolayer that contains OH, H₂O and H species are not acidic. The observations indicate the orientation‐specific acidity of adsorbed water. The acidity stems from water molecules with H‐down adsorption geometry present in the monolayer. However, the dissociation of water into H and OH on the surface does not promote but rather suppresses the proton transfer to ammonia.     

EFFECT OF VINYL ACETATE CONTENT ON THE MECHANICAL PROPERTIES AND MORPHOLOGICAL STRUCTURES OF POLYPROPYLENE

The effect of vinyl acetate （VA） content in ethylene vinyl acetate （EVA） copolyrner on the mechanical properties of polypropylene was investigated. Three different EVA copolymers with concentrations of 3 wt%, 6 wt%, 9 wt%, 12 wt% and 15 wt%, were blended to polypropylene. The mechanical properties such as yield and tensile strengths, elastic modulus, Izod impact strength, hardness and melt flow index of the blends were investigated. Relationship between type of vinyl acetate and concentrations, mechanical, MFI and morphological properties were explored.     

Effect of matrix viscosity on the extent of exfoliation in EVA/organoclay nanocomposites

The influence of matrix viscosity and polarity on ethylene‐vinyl acetate copolymer (EVA) nanocomposites was studied. Five different EVA grades, with different melt flow indexes (MFIs) and/or vinyl acetate (VA) contents, were mixed with two montmorillonite (MMT) nanoclays: pristine and modified with a polar surfactant, producing 75/25 w/w% masterbatches which were subsequently diluted in the EVA matrix to obtain 5 wt% MMT nanocomposites. Although the same VA content, WAXS results, rheological measurements and TEM analysis showed that the lower the EVA viscosity, the greater the tendency to obtain exfoliated and well dispersed nanocomposites with the organically modified clay. On the other hand, the high viscosity EVA nanocomposites showed that the (001) organoclay diffraction peak was shifted to higher values of 2θ, suggesting lamellae collapsing. TGA and FTIR measurements were used to probe the thermal degradation of organoclay; furthermore, it was not possible to identify, by the techniques used, any reaction between the VA groups and hydroxyl surfactant groups. Thus, it was inferred that the organic surfactant was removed (or ejected) from the clay galleries as a consequence of huge shear tensions developed during processing of the masterbatches/nanocomposites with high viscosity EVA matrices. Copyright © 2009 John Wiley & Sons, Ltd.     

A comparative study of thermal ageing characteristics of poly(ethylene‐co‐vinyl acetate) and poly(ethylene‐co‐vinyl acetate)/carbon black mixture

In this comparative study, the effect of carbon black (CB) on the thermal ageing characteristics of poly(ethylene‐co‐vinyl acetate) (EVA) was investigated. EVA, containing 13% vinyl acetate (VA), and poly(ethylene‐co‐vinyl acetate)/carbon black mixture (EVA/CB) containing 13% VA and 1% CB were aged at 85°C in air up to 30 weeks. Sol‐gel analysis experiments were made to determine the percentage gelation of both virgin and aged samples. FT‐IR measurements were performed to follow the chemical changes which took place in the samples during ageing. Dynamic and isothermal thermogravimetric studies were performed for determination of the thermal stabilities of virgin and aged samples. Sol‐gel analysis results showed that EVA itself has a tendency to form a gel under thermal treatment, whereas EVA/CB never becomes a gel when being thermally aged under the same conditions. As a result of FT‐IR measurements, some oxidation products such as ketone, lactone and vinyl species were observed through thermal ageing of EVA. It is also clear that these kind of oxidation products did not appear to a considerable extent in EVA/CB. Thermal analysis experiments exhibit that thermal stability of EVA decreased through thermal ageing; whereas that of EVA/CB remained almost unchanged. Copyright © 2004 John Wiley & Sons, Ltd.     

A comparative study of UV aging characteristics of poly(ethylene‐co‐vinyl acetate) and poly(ethylene‐co‐vinyl acetate)/carbon black mixture

In this comparative study, the effect of carbon black (CB) on the UV aging characteristics of poly(ethylene‐co‐vinyl acetate) (EVA) was investigated. EVA, containing 13% vinyl acetate (VA), and poly(ethylene‐co‐vinyl acetate)/carbon black mixture (EVA/CB), containing 13% VA and 1% CB, were aged by means of UV light with a wavelength in the vicinity of 259 nm, in air, up to 400 hr. Sol‐gel analyses were made to determine the percentage gelation of both virgin and aged samples. FT‐IR measurements were performed to follow the chemical changes which took place in the samples during aging. Dynamic and isothermal thermogravimetry studies were performed for determination of the thermal stabilities of virgin and aged samples. Sol‐gel analysis results showed that EVA itself has a tendency to form a gel under UV irradiation. EVA/CB, however, becomes a gel to a smaller extent, comparatively, under the same conditions. As a result of FT‐IR measurements, some oxidation products such as ketone, lactone and vinyl species were observed through UV ageing of EVA and EVA/CB. Thermal analysis experiments exhibited that the thermal stabilities of EVA and EVA/CB decreased, to a similar extent through UV aging. Copyright © 2004 John Wiley & Sons, Ltd.     

Structure,orientation, and conformation of adsorbed polyamides

The structural properties and interfacial organization of polyamides adsorbed as thin films were investigated. Polarization‐modulation infrared reflection–absorption spectroscopy was used first to identify the crystalline structure of adsorbed layers and to reveal the conformation and orientation of adsorbed chains. The influence on the structure and molecular orientation of the number of carbon atoms in the aliphatic chain of the diacid part was investigated (PA 66, 610, and 612). The effect of the substrate surface chemistry was also examined. Gold substrates are either inert or functionalized with OH groups. Grafting of the OH functions did not affect the orientation of chains that apparently lay rather parallel to the interface, whereas the crystalline morphology was dependent on the substrate chemical functionality. Knowledge of the structure and orientation of chains adsorbed at an interface was of fundamental importance for the prediction of adhesive strength, that is, the final performance of these latter depended strongly on the properties of the interface formed between the solids brought into contact. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1464–1476, 2002     

13C-NMR study of chlorinated ethylene–vinyl acetate copolymers

¹³C-NMR has been used to analyze the microstructures of a series of experimental chlorinated ethylene–vinyl acetate copolymers (15–56% CI). Previously established line assignments for EVA copolymers and substituent effect parameters for chlorine have enabled us to tentatively assign partial structures up to five carbon atoms in length. The ¹³C-NMR analyses of a commercial vinyl chloride–vinyl acetate copolymer, a commercial vinyl chloride–vinyl acetate–ethylene terpolymer, and a commercial chlorinated polyethylene support the structural assignments. Data obtained for the experimental resins indicate that the acetate groups influence the way in which chlorine is added to the polymer chain. furthermore, the data indicate the acetate groups undergo little, if any, chlorination.     

Thermal analysis and FT‐IR studies of adsorbed poly(ethylene‐stat‐vinyl acetate) on silica

Adsorbed poly(ethylene‐stat‐vinyl acetate) (PEVAc) on fumed silica was studied using temperature‐modulated differential scanning calorimetry (TMDSC) and FT‐IR spectroscopy. The properties of the copolymers were compared with poly(vinyl acetate) (PVAc) and low density polyethylene (LDPE) as references. TMDSC analysis of the copolymer‐silica samples in the glass transition region was complicated for the copolymers because of the ethylene crystallinity. Nevertheless, examination of the glass transition region for small adsorbed amounts of these copolymers indicated the presence of tightly‐ and loosely‐bound polymer segments, similar to other polymers which have an attraction to silica. Compared with bulk polymers with the same composition, the tightly‐bound polymers showed an increased glass transition temperature (T_g) and a loosely‐bound fraction with a lower T_g than bulk. FT‐IR spectra of the surface copolymers indicated that the fraction of bound carbonyls (p) increased as the fraction of vinyl acetate in the copolymers decreased, consistent with the notion that the carbonyls from vinyl acetate preferentially find their way to the silica surface. Spectra from samples with different adsorbed amounts of polymer were used to obtain the amount of bound polymer (M_b) and the ratio of molar absorption coefficients of bound carbonyls to free carbonyls (X). The copolymers had very large p values (up to 0.8) at small adsorbed amounts and dependent on the composition of the polymer. However, an analysis of the bound fractions, based on only the vinyl acetate groups, superimposed the data, suggesting that the ethylene units simply dilute the vinyl acetate groups in the surface polymer. The sample with the smallest fraction of vinyl acetate did not show this behavior and may be considered to be “carbonyl poor.” © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 727–736     

Miscibility and surface properties of fluorinated copolymer blends involving hydrogen‐bonding interactions

The miscibility and underlying hydrogen‐bonding interactions of blends of a fluorinated copolymer containing pyridine and a nonfluorinated copolymer containing methacrylic acid were studied with differential scanning calorimetry (DSC), transmission Fourier transform infrared (TX‐FTIR) spectroscopy, and X‐ray photoelectron spectroscopy (XPS), whereas the surface properties of the blends were investigated with contact‐angle measurements, time‐of‐flight secondary‐ion mass spectroscopy, XPS, and attenuated total reflectance Fourier transform infrared spectroscopy. DSC studies showed that the presence of a sufficient amount of 4‐vinylpyridine units in the fluorinated copolymer produced miscible blends with the nonfluorinated copolymer containing methacrylic acid. TX‐FTIR and XPS showed the existence of pyridine–acid interpolymer hydrogen‐bonding interactions. Even though the anchoring effect of hydrogen bonding hindered the migration of the fluorinated component to the blend surface, it could not completely eliminate the surface enrichment of the fluorinated component and the surface rearrangement of the fluorinated pendant chain. The air–blend interface was mainly occupied by the fluorinated pendant chain, and the surface energies of the blends were extremely low, even with only 1.5 wt % of the fluorinated component in the blends. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1145–1154, 2004