Tetramethylammonium hydroxide (TMAH) thermochemolysis of 2-arylcoumaran lignin model compounds

Phenolic 2-arylcoumarans 1–6 were used to examine the behaviors of β-5 subunits in lignin during tetramethylammonium hydroxide (TMAH) thermochemolysis. Products were monitored by gas chromatography/mass spectrometry. The process predominantly provided dimeric products with the opened hydrofuran ring. Substituent changes at the γ-position of ring A and at the 5-position of ring B had a large effect on the product compositions. 2-Arylcoumarans 1 and 6 with the γ-CH₂OH substituent predominantly gave 2,3,3′,4′-tetramethoxystilbenes involving the elimination of the γ-CH₂OH substituent, while 2–5 with the γ-CH₃ substituent gave a mixture of 2,3,3′,4′-tetramethoxy-α-methylstilbenes and α-methoxy-α-(3′,4′-dimethoxyphenyl)-β-(2,3-dimethoxyphenyl)propanes. Substituent –CHCHCH₃ on ring B remained unaffected. Substituents –CHCHCH₂OH and –COOH on ring B produced the corresponding methyl ether and ester, respectively, by methylation. The –CHCHCHO substituent on ring B was converted to the –CHO substituent.     

Theoretical investigation on possible mechanisms on regioselective formation of (η-siloxyallyl)tungsten complexes

Selective formation of (η³-siloxyallyl)tungsten complexes by reaction of hydrido(hydrosilylene)tungsten complexes with α,β-unsaturated carbonyl compounds was reported experimentally. The mechanisms have been investigated by employing the model reaction of [Cp(CO)₂(H)WSi(H)–{C(SiH₃)₃}] (R), derived from the original experimental complex Cp′(CO)₂(H)WSi(H)–[C(SiMe₃)₃] (1a, Cp′ = Cp*; 1b, Cp′ = η⁵-C₅Me₄Et), with methyl vinyl ketone, under the aid of the density functional calculations at the b3lyp level of theory. It is theoretically predicted that the route involving migration of the hydride to silicon to afford a 16e intermediate [Cp(CO)₂W–SiH₂–{C(SiH₃)₃}] is inaccessible (route 2), supporting the proposition by experiments. Another route, via [2 + 4] cycloaddition followed by directly Si–H reductive elimination, is theoretically predicted to be accessible (route 1). In route 1, two possible paths with different attacking directions of the oxygen of methyl vinyl ketone at Si (WSi) are put forward. The attack at the Si atom from the hydride (H1) side of the plane W–Si–H1 in R is found to be preferred kinetically. The regioselectivity for formation of (η³-siloxyallyl)tungsten complexes, where only the exo-anti isomer was obtained, is discussed based on the consideration of thermodynamics and kinetics.     

Nucleophilic destruction of organophosphate toxins: A computational investigation

Computed reaction enthalpies, free energies, and activation barriers in vacuo are presented for the nucleophilic detoxification of the organophosphorus compounds (H)(HO)P(O)F, (H)(H₃CO)P(O)F and (H₃C)(CH(CH₃)₂O)P(O)F via the reaction R₁OH + (R₂)(R₃O)P(O)F → (R₂)(R₃O)P(O)(OR₁) + HF for a wide variety of R₁OH nucleophiles. Density functional theory at the B3LYP/6-311++G(d,p) computational level was employed for all the calculations. A multi-step Wright-type reaction mechanism [J. B. Wright, W.E. White, J. Mol. Struct. (THEOCHEM) 454 (1998) 259], which proceeds via a proton transfer from the nucleophile to the fluorine atom through the phosphinyl oxygen atom, was consistently found to have a lower activation barrier in the gas-phase than for the corresponding mechanism that operates via a proton transfer from the nucleophile directly to the fluorine atom. Of the nucleophilic agents investigated, peroxybenzoic acid and o-iodosobenzoic acid had the lowest classical activation barrier for the Wright-type mechanism.     

H NMR Dynamic study of thermal Z/E isomerization of 5-substituted 2-alkylidene-4-oxothiazolidine derivatives: Barriers to rotation about CC bond

The rotational barriers between the configurational isomers of two structurally related push–pull 4-oxothiazolidines, differing in the number of exocyclic CC bonds, have been determined by dynamic ¹H NMR spectroscopy. The equilibrium mixture of (5-ethoxycarbonylmethyl-4-oxothiazolidin-2-ylidene)-1-phenylethanone (1a) in CDCl₃ at room temperature to 333 K consists of the E- and Z-isomers which are separated by an energy barrier ΔG^# 98.5 kJ/mol (at 298 K). The variable-temperature ¹H NMR data for the isomerization of ethyl (5-ethoxycarbonylmethylidene-4-oxothiazolidin-2-ylidene)ethanoate (2b) in DMSO-d₆, possessing the two exocyclic CC bonds at the C(2)- and C(5)-positions, indicate that the rotational barrier ΔG^# separating the (2E,5Z)-2b and (2Z,5Z)-2b isomers is 100.2 kJ/mol (at 298 K). In a polar solvent-dependent equilibrium the major (2Z,5Z)-form (>90%) is stabilized by the intermolecular resonance-assisted hydrogen bonding and strong 1,5-type S · · · O interactions within the SCCCO entity. The ¹³C NMR Δδ_C(2)C(2′) values, ranging from 58 to 69 ppm in 1a–d and 49-58 ppm in 2a–d, correlate with the degree of the push-pull character of the exocyclic C(2)C(2′) bond, which increases with the electron withdrawing ability of the substituents at the vinylic C(2′) position in the following order: COPh COEt > CONHPh > CONHCH₂CH₂Ph. The decrease of the Δδ_C(2)C(2′) values in 2a–d has been discussed for the first time in terms of an estimation of the electron donor capacity of the S fragment on the polarization of the CC bonds.     

Transformations of allylamine and N-allylacetamide on triosmium cluster complexes with hemilabile ligands

The cluster complexes (μ-H)Os₃(μ-OCR)(СО)₁₀ (R = Me (1); R = Ph (2)) catalyze the allylic rearrangement of N-allylacetamide at room temperature. Microwave irradiation greatly (by more than several thousand-fold) accelerates the reaction between the solution of 2 and allylacetamide. The interaction of cluster 2 with allylamine both at room and elevated temperatures results in cleavage of the C–N bond and coordination of the allylic fragment to one of the osmium atoms with the formation of Os₃(CO)₉(μ,η²-OC-Ph)(η³-C₃H₅) (4) cluster.     

Magnetic field effect on chemical compositions of spherical Fe/Co fine particles synthesized from a gaseous mixture of iron pentacarbonyl and cobalt tricarbonyl nitrosyl

Under UV light irradiation on a gaseous mixture of Fe(CO)₅ and Co(CO)₃NO, both the crystalline deposits with sizes of 5 and 18 μm and the spherical particles with a mean diameter of 0.3 μm were produced. From FT-IR spectra and SEM–EDS analysis, it was suggested that the chemical structure of the crystalline deposits was the one of Fe₂(CO)₉ being modified by involving Fe(CO)Co bond. By decreasing a partial pressure of Fe(CO)₅ to 0.5 Torr in the gaseous mixture, only the spherical aerosol particles could be produced. Chemical composition of the particles was rich in Co species. From the disappearance of bridging CO band in the FT-IR spectra of the particles and the appearance of CO bands coordinated to a metal atom, Fe atom in Fe(CO)₄ was suggested to be coordinated by the O atom in bridging CO bond in Co(CO)Co structure and/or in α-diketone structure which was formed from two CO groups in dicobalt species. Chemical compositions of the crystalline deposits and the spherical particles were influenced differently by the application of a magnetic field. Atomic ratio of Fe to Co atom decreased in the crystalline deposits whereas it increased in the spherical particles with increasing magnetic field up to 5 T. Linearly aggregated particles (i.e., particle wires) as long as 30 μm were produced on the front side of a glass plate placed at the bottom of the irradiation cell.     

Synthesis and characterization of new heterocyclic Schiff base palladacycles: Ring activation through N-oxide formation

Reaction of the Schiff base ligand derived from 4-pyridinecarboxaldehyde NC₅H₄C(H)N[2′,4′,6′-(CH₃)C₆H₂], (1), with palladium(II) acetate in toluene at 60 °C for 24 h gave [Pd{NC₅H₄C(H)N[2′,4′,6′-(CH₃)C₆H₂]}₂(OCOCH₃)₂], (2), with two ligands coordinated through the pyridine nitrogen. Treatment of the Schiff base ligand derived from 4-pyridinecarboxaldehyde N-oxide, 4-(O)NC₅H₄C(H)N[2′,4′,6′-(CH₃)C₆H₂], (4), with palladium(II) acetate in toluene at 75 °C gave the dinuclear acetato-bridged complex [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}(OCOCH₃)]₂, (5) with metallation of an aromatic phenyl carbon. Reaction of complex 5 with sodium chloride or lithium bromide gave the dinuclear halogen-bridged complexes [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}(Cl)]₂, (6) and [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}(Br)]₂, (7), after the metathesis reaction. Reaction of 6 and 7 with triphenylphosphine gave the mononuclear species [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}(Cl)(PPh₃)], (8) and [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}-(Br)(PPh₃)], (9), as air stable solids. Treatment of 6 and 7 with Ph₂P(CH₂)₂PPh₂ (dppe) in a complex/diphosphine 1:2 molar ratio gave the mononuclear complexes [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}(PPh₂(CH₂)₂PPh₂)][Cl], (10), and [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}(PPh₂(CH₂)₂PPh₂)][PF₆], (11), with a chelating diphosphine. The molecular structure of complex 9 was determined by X-ray single crystal diffraction analysis.     

Heterobimetallic aluminium and zinc complex with N-arylanilido-imine ligand: Synthesis, structure and catalytic property for ring-opening polymerization of ε-caprolactone

Treatment of a N-arylanilido-imine ligand [ortho-C₆H₄(NHAr)CHN]₂CH₂CH₂ (Ar = 2,6-Me₂C₆H₃) (LH₂) with one equiv. of AlMe₃ affords a monometallic complex [C₆H₄(NHAr)–CHN)]CH₂CH₂(C₆H₄(NAr)CHNAlMe₂) (1). The monometallic complex 1 reacts with one equiv. of ZnEt₂ to give a heterobimetallic complex [C₆H₄(NAr)–CHNZnEt]CH₂CH₂[C₆H₄(NAr)–CHNAlMe₂] (2). Both complexes were characterized by ¹H and ¹³C NMR spectroscopy and elemental analyses, and the molecular structures of 1 and 2 were determined by X-ray diffraction analysis. The complexes 1 and 2 both are efficient catalysts for ring-opening polymerization of ε-caprolactone in the presence of benzyl alcohol yielding polymers with narrow polydispersity values and complex 2 initiates the polymerization in a controllable manner.     

Seeking new metalloligands: Synthesis and reactivity of palladacycles with pyridine and pyrimidine rings

Treatment of the Schiff base ligands 4-(NC₅H₄)C₆H₄C(H)N[2′-(OH)C₆H₄] (a), 3,5-(N₂C₄H₃)C₆H₄C(H)N[2′-(OH)-C₆H₄] (b) and 3,5-(N₂C₄H₃)C₆H₄C(H) N[2′-(OH)-5′-^tBuC₆H₃] (c) with palladium (II) acetate in toluene gave the poly-nuclear cyclometallated complexes [Pd{4-(NC₅H₄)C₆H₃C(H)N[2′-(O)C₆H₄]}]₄ (1a), [Pd{3,5-(N₂C₄H₃)C₆H₃C(H)N[2′-(O)-C₆H₄]}]₄ (1b) and [Pd{3,5-(N₂C₄H₃)C₆H₃C(H)N[2′-(O)-5′-^tBuC₆H₃]}]₄ (1c) respectively, as air stable solids, with the ligand acting as a terdentate [C,N,O] moiety after deprotonation of the –OH group. Reaction of the cyclometallated complexes with triphenylphosphine gave the mononuclear species [Pd{4-(NC₅H₄)C₆H₃C(H) N[2′-(O)C₆H₄]}(PPh₃)], (2a), [Pd{3,5-(N₂C₄H₃)C₆H₃C(H) N[2′-(O)C₆H₄]}(PPh₃)], (2b) and [Pd{3,5-(N₂C₄H₃)C₆H₃C(H)N[2′-(O)-5′-^tBuC₆H₃)}(PPh₃)], (2c) in which the polynuclear structure has been cleaved and the coordination of the ligand has not changed [C,N,O]. When the cyclometallated complexes 1b and 1c were treated with the diphosphines Ph₂P(CH₂)₄PPh₂ (dppb), Ph₂PC₅H₄FeC₅H₄PPh₂ (dppf) and Ph₂P(CH₂)₂PPh₂ (t-dppe) in a 1:2 molar ratio the dinuclear cyclometallated complexes [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H)N{2′-(O)C₆H₄}]}₂(μ-Ph₂P(CH₂)₄PPh₂)], (3b), [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H) N{2′-(O)-5′-^tBuC₆H₃}]}₂(μ-Ph₂P(CH₂)₄PPh₂)], (3c), [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H)N{2′-(O)C₆H₄}]}₂(μ-Ph₂P(η⁵-C₅H₄)Fe(η⁵-C₅H₄)PPh₂)], (4b), [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H) N{2′-(O)-5′-^tBuC₆H₃}]}₂(μ-Ph₂P(η⁵C₅H₄)Fe(η⁵C₅H₄)P-Ph₂)], (4c) and [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H)N{2′-(O)-5′-^tBuC₆H₃}]}₂(μ-Ph₂P(CHCH)PPh₂)], (5c) were obtained as air stable solids.     

Specific crystal structure of poly(3-hydroxybutyrate) thin films studied by infrared reflection–absorption spectroscopy

Infrared reflection–absorption (IR-RAS) and transmission spectra were measured for poly(3-hydroxybutyrate) (PHB) thin films to explore its specific crystal structure in the surface region. As IR-RAS is sensitive to the vibration mode of perpendicular orientation of the surface, differences between IR-RAS and transmission spectra indicate an orientation of the lamella structure in the surface of PHB thin films. The relative intensity of the crystalline CO stretching band in the IR-RAS spectrum is significantly weaker than that in the transmission spectrum. It may be concluded that the transient dipole moment of the CO stretching mode of the crystalline state is not oriented perpendicular but nearly parallel to the substrate surface. On the other hand, the relative intensity of the band at 3009 cm⁻¹ due to the C–H stretching mode of the C–HOC hydrogen bonding is similar between the IR-RAS and transmission spectra, suggesting that the C–H bond is oriented neither perpendicular nor parallel to the substrate surface but in an intermediate direction. Since the CO group of the C–HOC hydrogen bonding is oriented nearly parallel to the surface and its C–H group is in the intermediate direction, it is very likely that the C–HOC hydrogen bonding has a somewhat bent structure. These results are in good agreement with our previous conclusion that the C–HOC hydrogen bonding of PHB exists along the a-axis (not the b-axis) between the CH₃ group of one helix and the CO group of another helix.     

Conformational dependence of the second hyperpolarizability of quadrupolar molecules

Hatree–Fock calculations at ab initio and semiempirical levels were carried out for the averaged polarizability α and second hyperpolarizability γ of two pairs of quadrupolar isomers with different donor and acceptor groups. These properties were correlated with the antibonding/bonding π occupation number (π*/π ratio). It was found that isomers with extended π systems had low π*/π ratios and high α and γ values, while low α and γ values were obtained for isomers with large π*/π ratios and no extended π system. The PM3 and PM6 α values were found to be in excellent agreement with the HF/6-31+G(d,p) ones. The PM3 values for γ were significantly larger than those calculated by HF/6-31+G(d,p), with an average PM3/HF ratio of 1.43. The PM6 results were noticeably better with a ratio of 0.85. The calculation of α and γ at MP2/6-31+G(d,p) level for representative isomers showed that the contribution of the electron correlation to their values was small and that the HF/6-31+G(d,p) method provides reliable values at much lower computational cost.     

Effects of dipole interaction and solvation on the CO stretching band of N,N-dimethylacetamide in nonpolar solutions: Infrared, isotropic and anisotropic Raman measurements

The concentration dependence of the CO stretching (ν_CO) band of N,N-dimethylacetamide (NdMA) in cyclohexane, n-hexane, and CCl₄ has been investigated by infrared (IR) and polarized Raman spectroscopy. For the neat liquid of NdMA, the noncoincidence of the aniso- and isotropic Raman wavenumbers is evident. In the 0.47 M cyclohexane solution of NdMA, the noncoincidence effect almost disappears and the ν_CO envelopes in both the Raman and IR spectra are asymmetric to the low-wavenumber side. When the concentration of NdMA decreases from 0.33 to 0.023 M, the peak of these bands slightly shifts to a higher wavenumber and the band shape becomes symmetric. The shape of the ν_CO envelope does not show any significant change below 0.023 M. These results suggest that the asymmetric shape of the ν_CO band observed for the 0.33 M cyclohexane solution is associated with the intermolecular interaction among NdMA molecules, which vanishes at around 0.02 M. Spectral changes for the CCl₄ solution of NdMA show a similar tendency. However, the shape and peak wavenumber of the ν_CO band observed in a highly diluted CCl₄ solution (≤0.023 M) indicate that the solvation effect of CCl₄ is more complicated than those of cyclohexane and n-hexane. The analyses of the ν_CO band, which is sensitive to the intermolecular interaction between solutes and between solute and solvent for NdMA dissolved in nonpolar solvents, would serve to clarify the electronic property of the molecule in a solution.     

An unprecedented Cu–Schiff base complex existing as two different trinuclear units with strong antiferromagnetic couplings

A new tetradentate N₂O₂ donor Schiff base ligand [OHC₆H₄CHNCH₂CH₂CH(CH₂CH₃)NCHC₆H₄OH = H₂L ] was obtained by 1:2 condensation of 1,3-diaminopentane with salicylaldehyde and has been used to synthesise an unusual copper(II) complex whose asymmetric unit presents two structurally different almost linear trinuclear units [Cu₃(μ-L)₂(ClO₄)₂] [Cu₃(μ-L)₂(H₂O)(ClO₄)₂] (1). The ligand and the complex were characterised by elemental analysis, FT-IR, ¹H NMR and UV–Vis spectroscopy in addition electrochemical and single crystal X-ray diffraction studies were performed for the complex. The magnetic properties of 1 reveal the presence of strong intra-trimer (J₁ = −202(3) cm⁻¹ and J₂ = −233(3) cm⁻¹) as well as very weak inter-trimer (zJ′ = −0.11(1) cm⁻¹) antiferromagnetic interactions.     

Investigations of molecular interactions in propionic acid–N,N-dimethyl formamide binary system—FTIR study

FTIR spectra of propionic acid (PA), N,N-dimethyl formamide (DMF) and its binary mixtures with varying molefractions of the PA were recorded in the region 500–3500 cm⁻¹, to investigate the formation of hydrogen bonded complexes in a mixed system. The observed features in ν(CO), δ(OC–N) and ν_as(CN) of DMF, ν(CO) and ν(CO) of PA have been explained in terms of the hydrogen bonding interactions between DMF and PA and dipole–dipole interaction. The intrinsic bandwidth for the vibrational modes ν_as(CN) and ν(CO) has been elucidated using Bondarev and Mardaeva model.     

DFT study on second-order nonlinear optical properties of the derivatives of 7-vertex cobalt–carborane metallocenyl

Density functional theory (DFT) B3LYP method was employed to calculate electron properties and the second-order nonlinear optical (NLO) responses of the derivatives which were formed by (C₅H₅)Co(C₂B₄H₆) and CHCHC₆H₄NO₂, CHCHC₆H₄NH₂. The results show: when H atom of (C₅H₅)Co(C₂B₄H₆) is substituted by CHCHC₆H₄NO₂, the β_tot values of isomers are all slightly smaller than that of ferrocene (Fc) derivative (FcCHCHC₆H₄NO₂). However, when H atom of (C₅H₅)Co(C₂B₄H₆) is substituted by CHCHC₆H₄NH₂, the β_tot values of isomers are close to that of ferrocene (Fc) derivative (FcCHCHC₆H₄NH₂). It indicates that (C₅H₅)Co(C₂B₄H₆) can be either a donator or an acceptor.     

A bonding study of cyclopentene (c-C5H8) adsorption on Ni(1 1 1) surface

The adsorption of cyclopentene (c-C₅H₈) on Ni(1 1 1) was studied using DFT and semiempirical calculations. Preferred site and geometry calculations were carried out considering a Ni(1 1 1) surface and a unit cell of 64-atoms. The tetrahedral threefold hollow position was identified as the most favorable site, with a surface-molecule minimum distance of 1.83 Å. A bending structure is adopted when the molecule is adsorbed where the carbon atoms of the double bond are closer to the surface forming an angle of 160° among non-equivalents carbon atoms. The metal surface was represented by a two-dimensional slab with an overlayer of c-C₅H₈/Ni of 1/9 ratio. We also computed the density of states (DOS) and the crystal orbital overlap populations (COOP) corresponding to CC, CNi, CH, and NiNi bonds. We found that both NiNi bonds interacting with the ring, and the CC bond are weakened after adsorption, this last bond is linked significantly to the surface. The hydrogen atoms belonging to the saturated carbon atoms also participate in the adsorbate–surface bonding. The main interactions include the 4s, 3p_z and 5d_z² bands of nickel and 2p_z bands of the carbon atoms of the double bond.     

Synthesis, structure and DNA binding studies of mononuclear copper(II) complexes with mixed donor macroacyclic ligands, 2,6-bis({N-[2&3-(phenylselenato)alkyl]}benzimidoyl)-4-methylphenol

Two new phenol based macroacyclic Schiff base ligands, 2,6-bis({N-[2-(phenylselenato)ethyl]}benzimidoyl)-4-methylphenol (bpebmpH, 1) and 2,6-bis({N-[3-(phenylselenato)propyl]}benzimidoyl)-4-methylphenol (bppbmpH, 2) of the Se₂N₂O type have been prepared by the condensation of 4-methyl-2,6-dibenzoylphenol (mdbpH) with the appropriate (for specific reactions) phenylselenato(alkyl)amine. These ligands with Cu(II) acetate monohydrate in a 2:1 molar ratio in methanol form complexes of the composition [(C₆H₂(O)(CH₃){(C₆H₅)CN(CH₂)_nSe(C₆H₅)}{(C₆H₅)CO}₂Cu] (3 (n = 2), 4 (n = 3)) with the loss of phenylselenato(alkyl)amine and acetic acid. In both these complexes, one arm of the ligand molecule undergoes hydrolysis, and links with Cu(II) in a bidentate (NO) fashion, as confirmed by single crystal X-ray crystallography of complex 3. The selenium atoms do not form part of the copper(II) distorted square planar coordination sphere which has a trans-CuN₂O₂ core. The average Cu–N and Cu–O distances are, respectively, 1.973(3) and 1.898(2) Å. The N–Cu–N and O–Cu–O angles are, respectively, 167.4(11)° and 164.5(12)°. The compounds 1–4 have been characterized by elemental analysis, conductivity measurements, mass spectrometry, IR, electronic, ¹H and ⁷⁷Se{¹H} NMR spectroscopy and cyclic voltammetry. The interaction of complex 3 with calf thymus DNA has been investigated by a spectrophotometric method and cyclic voltammetry.     

Interpretation of vibrational and NMR spectra of allyl acrylate: An evidence for several conformers

The mid-IR, far-IR, and Raman spectra of allyl acrylate were measured and interpreted with support of the B3LYP/aug-cc-pVDZ calculated anharmonic vibrational spectra followed by the potential energy distribution analysis. The experimental ¹H and ¹³C NMR spectra of allyl acrylate dissolved in CDCl₃ or C₆D₆ were interpreted by means of the B3LYP/aug-cc-pVDZ-su2 calculated NMR chemical shifts and J(¹H,¹H) and J(¹H,¹³C) coupling constants. Exactly ten stable allyl acrylate conformers (five s-cis and five s-trans) were found after careful B3LYP/aug-cc-pVDZ and MP2/aug-cc-pVDZ scan of the conformational space. The experimental IR and Raman spectra are in good agreement with the theoretical spectra of the most stable conformers 1 with a presence of the second stable conformer 2, both exhibiting cis arrangement of the acrylic moiety. There are however two bands in the IR spectra, at ca. 1270 and 1260 cm⁻¹, that definitely indicate the conformers with trans arrangement of the acrylic moiety to be present in liquid allyl acrylate. The bands at ca. 2990 and 1650 cm⁻¹ are suggested to be due to Fermi resonances engaging CH and CC stretching vibrations, respectively. The careful inspection of the room temperature ¹H and ¹³C NMR spectra of allyl acrylate suggest that a dominating form of the allyl acrylate molecule in an inert solvent exhibits the cis conformation of the acrylic moiety and an extended allyl group.     

Competition between non-classical and classical hydrogen bonded sites in [BH3CN]: Spectral, energetic, structural and electronic features

Interaction of the salt (Ph₃PNPPh₃)BH₃CN with the various OH and NH proton donors in low polar media was studied by variable temperature (200–290 K) IR spectroscopy and theoretically by DFT calculations. The formation of two types of complexes containing non-classical dihydrogen bond to the hydride hydrogen (DHB) and classical hydrogen bond (HB) to nitrogen lone pair was shown in solution. The 1:1 complexes of both types (XHH and XHN) coexist in the presence of equimolar amount of proton donor. The addition of excess XH-acid leads to the increase of the classical HB content and appearance of the 1:2 complexes, where two basic sites work simultaneously. The structure, spectral characteristics, energy and electron redistribution were studied by DFT (B3LYP) method. The comparison DHB parameters of [BH₃CN]⁻ with those of the unsubstituted analogue [BH₄]⁻ allowed analyzing the electronic effects of the CN group on the basic properties of boron hydride moiety. The electronic influence of the BH₃ group on CN⁻HX hydrogen bond was also established by comparison with the corresponding classical HB to the CN⁻ anion.     

Molybdenum(VI) network polymers based on anion–π interaction and hydrogen bonding: Synthesis, crystal structures and oxidation catalytic application

A crystallographic investigation of anion–π interactions and hydrogen bonds on the preferred structural motifs of molybdenum(VI) complexes has been carried out. Two molybdenum(VI) network polymers MoO₂F₄·(Hinca)₂ (1) and MoO₂F₃(H₂O)·(Hinpa) (2), where inca = isonicotinamide and inpa = isonipecotamide, have been synthesized, crystallographically characterized and successfully applied to alcohol oxidation reaction. Complex 1 crystallizes in the monoclinic space C2/c: a = 16.832(3) Å, b = 8.8189(15) Å, c = 12.568(2) Å, β = 118.929(3)°, V = 1560.1(5) Å³, Z = 4. Complex 2 crystallizes in the triclinic space P-1: a = 5.459(2) Å, b = 9.189(4) Å, c = 12.204(5) Å, α = 71.341(6)°, β = 81.712(7)°, γ = 77.705(7)°, V = 564.8(4) Å³, Z = 2. Complex 1 consists of hydrogen bonding and anion–π interactions, both of which are considered as important factors for controlling the geometric features and packing characteristics of the crystal structure. The geometry of the sandwich complex of [MoO₂F₄]²⁻ with two pyridine rings indicates that the anion–π interaction is an additive and provides a base for the design and synthesis of new complexes. For complex 2, the anions and the protonated inpa ligands form a 2D supramolecular network by four different types of hydrogen contacts (N–HF, N–HO, O–HF and O–HO). The catalytic ability of complexes 1 and 2 has also been evaluated by applying them to the oxidation of benzyl alcohol with TBHP as oxidant.