Surface metal modifiers for methanol electrooxidation on platinum; silver and mercury

The catalytic activity of platinum surfaces towards methanol electrooxidation can be modified by the deposition of a second metal using different methodologies. There is little information about the catalytic performance of polycrystalline platinum modified by silver and mercury adatoms using spontaneous and electrochemical deposition methods. Cyclic voltammetrics have been performed to compare the current vs potential profiles of modified platinum surfaces in acid solution at room temperature. The inhibition of the hydrogen adatom voltammetric profile by foreign metal adatoms on platinum was used to calculate the degree of surface coverage by the metal. Poisoning effects were checked by anodic stripping experiments of methanol residues on the modified platinum surfaces at adsorption potentials in the hydrogen electrosorption region using a micro flux cell. Methanol solution oxidation was also evaluated at slow scan rates of up to 0.8 vs reversible hydrogen electrode (RHE) on the platinum-modified surfaces. The comparison between the amounts of carbon-monoxide-type residues and the solution oxidation of methanol was analysed to check for their utility as catalytic surfaces for direct methanol fuel cells. Dedicated to Professor Dr. Algirdas Vaskelis on the occasion of his 70th birthday.     

Pt及其修饰电极上甲醇吸附和氧化的CV和EQCM研究

运用电化学循环伏安和石英晶体微天平 (EQCM )研究了 0 .1mol·L- 1H2 SO4 溶液中甲醇在Pt电极和以Sb ,S不可逆吸附原子修饰的Pt(Pt/Sbad和Pt/Sad)电极上的吸附和氧化过程 .结果表明甲醇的氧化与电极表面氧物种有着极其密切的关系 .Pt电极表面Sb吸附原子能在较低的电位下吸附氧 ,可显著提高甲醇电催化氧化活性 .与Pt电极相比较 ,Sb吸附原子修饰的Pt电极使甲醇氧化的峰电位负移了 0 .13V .相反 ,Pt电极表面S吸附原子的氧化会消耗表面氧物种 ,抑制了甲醇的电氧化 .本文从表面质量变化提供了吸附原子电催化作用的新数据     

Gold nanoparticle-modified glassy carbon electrode for electrochemical investigation of aliphatic di-carboxylic acids in aqueous media

The electrochemical reduction of di-carboxylic acids; oxalic, succinic, malic, and tartaric have been studied on the gold nanoparticles modified electrode in aqueous media solution of 0.1 M KCl. Gold nanoparticle (Au_NPs)-modified electrodes were prepared by the electrodeposition with cyclic voltammetric method onto glassy carbon electrode in acidic media. The surface morphology of the electrodeposited gold nanoparticles was examined by SEM. Also, the electrochemical properties of the prepared electrodes were investigated with different electrochemical techniques; cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy. Cyclic voltammetric, chronoamperometric, and electrochemical impedance spectroscopic techniques were used for investigating the electrochemical behavior of the particulate acids. The modification of the electrode with Au nanoparticles (Au_NPs) enables the appearance of cyclic voltammogram peaks completely clear and sharp for the acids under investigation in comparison with the poor behavior of them in absence of the modification. All acids undergo totally irreversible redox reaction in neutral and acid media. The cyclic voltammetric response of the investigated acids is sensitive to pH, as well as of the scan rate. Each acid has a different reduction peak position from the other acids depending on the structure of the acid undergo the electroreduction process. Further, the lowest unoccupied molecular orbital energies of the investigated acids have been theoretically evaluated and are compared with their electroreduction potential peaks.     

次亚磷酸根离子在铂电极上氧化的机理研究(英文)

用SNIFTIRS和循环伏安法研究次亚磷酸根离子在多晶铂电极上的电氧化机理 .分析了0 .5mol/LH2 SO4 + 0 .1mol/LNaH2 PO2 溶液中原位红外反射谱图与Pt电极电位的关系 ,发现次亚磷酸根离子在Pt上发生解离吸附 ,其氧化产物是H3 PO4 ,不同于在Ni上的氧化产物H2 PO- 3 ,据此提出了酸性溶液中次亚磷酸根离子在Pt上氧化机理的新看法     

烟酸的电化学行为与测定

用循环伏安法研究了不同支持电解质溶液中烟酸的电化学行为。烟酸在玻碳电极表面有良好的电化学响应信号。在碱性介质中,烟酸被不可逆氧化,氧化产物具有电活性,可发生准可逆氧化还原反应;在酸性介质中,烟酸发生两步准可逆氧化还原反应。结合红外、紫外光谱分析,提出了烟酸在不同酸度的介质中的电化学反应历程。并根据－０．１３Ｖ处的氧化峰电流与烟酸浓度的关系,提出了电化学测定烟酸的新方法     

Effects of pretreatments and modifiers on electrochemical properties of carbon paste electrodes

The electrochemical properties of carbon paste electrodes (CPEs), including unmodified and modified with protein and polycations, were investigated by impedance spectroscopy (IS) using ferricyanide and ferrocene monocarboxylic acid (FcMA) as redox probes. Various electrochemical pretreatments were applied to the unmodified CPE. The heterogeneous charge transfer rate constant of ferro/ferricyanide couple is enhanced by 2 to 10 times compared with that obtained at untreated electrodes. It was found that for ferricyanide the more suitable pretreatments are successive cyclic voltammetric scans, cathodization and a square wave-like stepping rather than high-potential anodization. However, the pretreatment only exhibits a slight effect on the kinetics of FcMA. At the CPEs containing modifier, the electron transfer rate of the redox couple depends more on the pH of electrolyte solution if ferro/ferricyanide is used. The results can be explained by the differently charged states of the CPEs that were caused by the protonation or deprotonation of the modifiers in various pH solutions and demonstrate the importance of the electrostatic interaction on the kinetics of the highly polar species such as ferricyanide. The different adsorptive behavior of ferricyanide and FcMA is also discussed.     

Catalytic effects of ruthenium and osmium spontaneous deposition on platinum surfaces toward methanol oxidation

The influence of ruthenium and osmium spontaneous deposition on polycrystalline platinum in sulfuric acid was studied by conventional electrochemical techniques. The inhibition of the hydrogen adatom voltammetric profile by the foreign adatoms was used to calculate the degree of surface coverage of ruthenium, osmium, and a mixture of both metal ions from solutions of different composition. Methanol adsorption and oxidation were compared on bare platinum, platinum/ruthenium, platinum/osmium, and ternary compounds, considering the efficiency of methanol oxidation per hydrogen adatom displaced by the foreign metal on platinum.     

Electro‐oxidation of Methanol and Ethanol Catalyzed by Pt/ZSM‐5/C

Direct alcohol fuel cells are a promising source of future energy generation for small and portable devices. Platinum is considered the best catalyst for electro‐oxidation of alcohols in fuel cells but the major hurdles with platinum catalysts are high cost of platinum as well as low selectivity, slow reaction kinetics and carbonaceous poisoning associated with platinum. This particular research reports electro‐oxidation of methanol and ethanol over platinum electrodeposited on ZSM‐5 without any carbon additive. From the cyclic voltammetry and chronoamperometry, linear sweep voltammetry, tafel plot and multiple scan analyses, it is found that Pt/ZSM‐5/C electrodes can catalyze electro‐oxidation of methanol and ethanol with higher efficiency. ZSM‐5 supports the formation of smaller sized platinum nanoparticles in a dispersed manner on the zeolite support and thus increases the active surface area of the metal for catalytic activity. It favors adsorption of alcohol molecules on the modified electrode surface and thus increases the diffusion process. It also stabilizes the modified electrodes.     

The Electrochemical Behavior of Nitrazepam at a Screen‐Printed Carbon Electrode and Its Determination in Beverages by Adsorptive Stripping Voltammetry

The cyclic voltammetric behavior of nitrazepam was investigated at screen‐printed carbon electrodes over the range ?1.5 V to +1.5 V. Two reduction peaks were observable on the negative scan, at ?0.7 V, and ?1.2 V using pH 6 buffer. On the return scan a single oxidation peak was obtained at ?0.05 V. For quantitative analysis of beverages, we developed an anodic adsorptive stripping voltammetric method which required only dilution with buffer. The identification of nitrazepam and flunitrazepam could be achieved using cyclic voltammetry.     

A study of the electrocatalytic oxidation of methanol on a nickel–salophen-modified glassy carbon electrode

Nickel–salophen-modified glassy carbon electrodes prepared by transferring one drop of Ni–salophen complex solution on the electrode surface. This modified electrode has been used for the electrocatalytic oxidation of methanol in alkaline solutions with various methods such as cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy. The electrooxidation was observed as large anodic peaks, and early stages of the cathodic direction of potential sweep around 20 mV vs. Ag|AgCl|KCl_sat. A mechanism based on the electrochemical generation of Ni (Ш) active sites and their subsequent consumptions by methanol have been discussed. EIS studies were employed to unveil the charge transfer rate as well as the electrical characteristics of the catalytic surface. For the electrochemical oxidation of methanol at 5.0 M concentration, charge transfer resistance of nearly 0.936 kΩ was obtained, while the resistance of the electrocatalyst layer was about 111.6 Ω.     

碱性介质中多孔纳米结构镍/钯-镍电极上甲醇电氧化反应(英文)

A nanostructured Ni/Pd-Ni catalyst with high activity for methanol oxidation in alkaline solution was prepared by electrodeposition followed by galvanic replacement, that is, electrodeposition of Ni-Zn on a Ni coating with subsequent replacement of the Zn by Pd at the open circuit potential in a Pd-containing alkaline solution. The surface morphology and composition of the coatings were examined by energy dispersive X-ray spectroscopy and scanning electron microscopy. The Ni/Pd-Ni coatings were porous and were composed of discrete Pd nanoparticles of about 58 nm. The electrocatalytic activity of the Ni/Pd-Ni electrodes for the oxidation of methanol was examined by cyclic voltammetry and electrochemical impedance spectroscopy. The onset potentials for methanol oxidation on Ni/Pd-Ni were 0.077 V and 0.884 V, which were lower than those for flat Pd and smooth Ni electrodes, respectively. The anodic peak current densities of these electrodes were 4.33 and 8.34 times higher than those of flat Pd (58.4 mA/cm2 vs 13.47 mA/cm2) and smooth Ni (58.4 mA/cm2 vs 7 mA/cm2). The nanostructured Ni/Pd-Ni electrode is a promising catalyst for methanol oxidation in alkaline media for fuel cell application.     

CO oxidation on Pt-modified Rh(111) electrodes.

The CO electro-oxidation reaction was studied on platinum-modified Rh(111) electrodes in 0.5 M H2SO4 using cyclic voltammetry and chronoamperometry. The Pt-Rh(111) electrodes were generated during voltammetric cycles at 50 mV s(-1) in a 30 microM H2PtCl6 and 0.5 M H2SO4 solution. Surfaces generated by n deposition cycles were investigated (Ptn-Rh(111) with n=2, 4, 6, 8, 10, and 16). The blank cyclic voltammograms of these surfaces are characterized by a pronounced sharpening of the hydrogen/(bi)sulfate adsorption/desorption peaks, typical for Rh(111), and the appearance of contributions between 0.1 and 0.4 V, which were ascribed to hydrogen/(bi)sulfate adsorption/desorption on the deposited platinum. At higher potentials, the surface oxidation of Rh(111) is enhanced by the presence of platinum. The structure of the Pt-modified electrodes was investigated by STM imaging. At low Pt coverages (Pt2-Rh(111)), monoatomically high islands are formed, which grow three dimensionally as the number of deposition cycles increases. After eight cycles, the monolayer islands have grown in diameter and range from mono- to multiatomic height. At even higher Pt coverage (Pt16-Rh(111)), the islands grow to particles of approx. 10 nm in diameter, which are 5-6 atoms high. The CO stripping voltammetry on these surfaces is characterized by two peaks: A low-potential, structure-insensitive peak, ascribed to CO reacting at the platinum monolayer islands, whose onset is shifted 150, 250, and 100 mV negatively with respect to pure Rh(111), Pt(111), and polycrystalline Pt, respectively, indicating the enhanced CO electro-oxidation properties of the Pt overlayer system. A peak at higher potentials displays strong structure sensitivity (particle-size effect) and was ascribed to CO reacting on the islands of multiatomic height. Current-time transients recorded on the surface with the highest amount of monolayer islands (Pt4-Rh(111)) also indicate enhanced CO-oxidation kinetics. Comparison of the Pt4-Rh(111) current-time transients recorded at 0.635, 0.675, and 0.750 V versus RHE (reversible hydrogen electrode) with those of pure Rh(111) and Pt(111) shows greatly reduced reaction times. A Cottrellian decay at long times indicates surface-diffusion-limited CO oxidation on the bare Rh(111) surface, while the peak visible at short times is indicative of CO reacting at the monolayer platinum islands. The results presented here show that, as indicated by density functional theory (DFT) calculations, the CO-adlayer oxidation for this system is enhanced compared to both pure Rh and Pt.     

Electrochemical determination of activation energies for methanol oxidation on polycrystalline platinum in acidic and alkaline electrolytes

The oxidation pathways of methanol (MeOH) have been the subject of intense research due to its possible application as a liquid fuel in polyelectrolyte membrane (PEM) fuel cells. The design of improved catalysts for MeOH oxidation requires a deep understanding of these complex oxidation pathways. This paper will provide a discussion of the literature concerning the extensive research carried out in acidic and alkaline electrolytes. It will highlight techniques that have proven useful in the determination of product ratios, analysis of surface poisoning, anion adsorption, and oxide formation processes, in addition to the effects of temperature on the MeOH oxidation pathways at bulk polycrystalline platinum (Pt(poly)) electrodes. This discussion will provide a framework with which to begin the analysis of activation energy (E(a)) values. This kinetic parameter may prove useful in characterizing the rate-limiting step of the MeOH oxidation at an electrode surface. This paper will present a procedure for the determination of E(a) values for MeOH oxidation at a Pt(poly) electrode in acidic and alkaline media. Values from 24-76 kJ mol(-1) in acidic media and from 36-86 kJ mol(-1) in alkaline media were calculated and found to be a function of applied potential and direction of the potential sweep in a voltammetric experiment. Factors that influence the magnitude of the calculated E(a) include surface poisoning from MeOH oxidation intermediates, anion adsorption from the electrolyte, pH effects, and oxide formation processes. These factors are all potential, and temperature, dependent and must clearly be addressed when citing E(a) values in the literature. Comparison of E(a) values must be between systems of comparable electrochemical environment and at the same potential. E(a) values obtained on bulk Pt(poly), compared with other catalysts, may give insight into the superiority of other Pt-based catalysts for MeOH oxidation and lead to the development of new catalysts which lower the E(a) barrier at a given potential, thus driving MeOH oxidation to completion.     

Determination of tocopherols by reverse-phase liquid chromatography and electrochemical detection at a surface-oxide modified platinum microelectrode, without added electrolyte

The reverse-phase separation and electrochemical detection of alpha-, gg-, and delta-tocopherol at a potential of +0.90 V vs. a gold pseudo-reference electrode is possible down to 10(-7)M concentrations, with surface-modified platinum microdisc electrodes in a methanol/water (95:5) solvent mixture. The use of microclectrodes with radii of 10-70 mum, rather than electrodes of conventional size, minimizes problems associated with iR drop and obviates the need for deliberately added electrolyte. These features simplify the analytical procedure. The background response of an untreated platinum microelectrode in the methanol/water (95:5) system at positive potentials is characterized by processes arising from adsorption/oxidation of methanol and formation of surface oxides. Amperometric detection is of little use under these conditions. However, preoxidation of the electrode surface in 2M nitric acid inhibits the methanol adsorption/oxidation reaction but not the tocopherol response and therefore allows highly sensitive amperometric detection.     

Platinum-modified polyaniline/polysulfone composite film electrodes and their electrocatalytic activity for methanol oxidation

The polyaniline/polysulfone (PAN/PSF) composite films were prepared by electropolymerization, and then platinum was deposited into this composite film to obtain the platinum-modified polyaniline/polysulfone(Pt/PAN/PSF) composite film electrodes. Their component, morphology and structure were characterized by FTIR spectra, scanning electron microscopy and energy dispersive X-ray spectroscopy. The results show that the composite film has a bi-layer structure with asymmetrical pores, and the platinum particles are homogeneously dispersed in the modified film electrodes. The cyclic voltammetry and electrochemical impedance spectroscopy techniques were applied to investigate the electrochemical properties and the electrocatalytic activity of the modified film electrodes, which show a promotive action for methanol oxidation and the methanol oxidation under a diffusion-controlled process.     

Methanol electrooxidation on novel modified carbon paste electrodes with supported poly(isonicotinic acid) (sodium dodecyl sulfate)/Ni-Co electrocatalysts

Poly(isonicotinic acid) (PINA) was formed by successive cyclic voltammetry in monomer solution in the presence of sodium dodecyl sulfate (SDS) on the surface of a carbon paste electrode (CPE). Ni(II) and Co(II) ions were incorporated into the electrode by immersion of the polymer-modified electrodes in Ni(II) and Co(II) ion solutions in different proportions. After the preparation of modified electrodes, their electrochemical behavior was studied by cyclic voltammetric experiments. Electrocatalytic oxidation of methanol at the surface of the modified electrodes was studied in 1?M NaOH solution. These modified electrodes exhibit high electrocatalytic activity and stability in alkaline solution, showing oxidation peaks at low potentials with high current densities. The electrooxidation of methanol was found to be more efficient on CPE/PINA(SDS)/Ni₈₀Co₂₀ than on CPE/PINA(SDS)/Ni and CPE/PINA(SDS)/Ni₅₀Co₅₀. The effects of various parameters such as scan rates and methanol concentration on the electrooxidation of methanol are also investigated.     

Effect of the iridium oxide thin film on the electrochemical activity of platinum nanoparticles

The influence of the iridium oxide thin film on the electrocatalytic properties of platinum nanoparticles was investigated using the electro-oxidation of methanol and CO as a probe. The presence of the IrO(2) thin film leads to the homogeneous dispersion of Pt nanoparticles. For comparison, polycrystalline platinum and Pt nanoparticles dispersed on a Ti substrate in the absence of an IrO(2) layer (Ti/Pt) were also investigated in this study. Inverted and enhanced CO bipolar peaks were observed using an in situ electrochemical Fourier transform infrared technique during the methanol oxidation on the Pt nanoparticles dispersed on a Ti substrate. Electrochemical impedance studies showed that the charge transfer resistance was significantly lower for the Ti/IrO(2)/Pt electrode compared with that of the massive Pt and Ti/Pt nanoparticles. The presence of the IrO(2) thin film not only greatly increases the active surface area but also promotes CO oxidation at a much lower electrode potential, thus, significantly enhancing the electrocatalytic activity of Pt nanoparticles toward methanol electro-oxidation.     

甲醇在欠电位沉积Ru修饰Pt电极上的催化氧化

采用欠电位沉积(upd)方法在Pt 表面沉积亚单层的Ru制备出upd-Ru/Pt 电极. 通过欠电位沉积前后电极在0.5 mol·L-1 H2SO4溶液中循环伏安图-152 - 128 mV(vs Ag/AgCl)电位范围内对氢区的数值积分确定Pt表面Ru 的覆盖度. 用电化学方法测试了甲醇在upd-Ru/Pt电极上的催化氧化, 并讨论分析了欠电位沉积电位和Ru的表面覆盖度对甲醇氧化的影响. 结果表明, Ru能够欠电位沉积到Pt表面. Pt表面欠电位沉积少量的Ru 即能大大促进甲醇的氧化.只要控制upd-Ru的沉积量, upd-Ru原子就能大大促进甲醇氧化而与沉积电位无关. Ru原子对甲醇氧化的促进作用与Ru和Pt是否形成合金无关, 而取决于Ru 在Pt表面的百分含量.     

Promotion of the oxidation of carbon monoxide at stepped platinum single-crystal electrodes in alkaline media by lithium and beryllium cations

The role of alkali cations (Li(+), Na(+), K(+), Cs(+), and Be(2+)) on the blank voltammetric response and the oxidative stripping of carbon monoxide from stepped Pt single-crystal electrodes in alkaline media has been investigated by cyclic voltammetry. A strong influence of the nature of the cation on both the blank voltammetric profile and the CO oxidation is observed and related to the influence of the cation on the specific adsorption of OH on the platinum surface. Especially Li(+) and Be(2+) cations markedly affect the adsorption of OH and thereby have a significant promoting effect on CO(ads) oxidation. The voltammetric experiments suggest that, on Pt(111), the influence of Li(+) (and Be(2+)) is primarily through a weakening of the repulsive interactions between the OH in the OH adlayer, whereas in the presence of steps also, the onset of OH adsorption is at a lower potential, both on steps and on terraces.     

Performance evaluation of nickel as anode catalyst for DMFC in acidic and alkaline medium

Direct methanol fuel cell (DMFC) research is highly focused due to its high energy density, portability and inexpensive. In the present study conventional platinum catalyst used for methanol oxidation is being replaced with nickel catalyst supported over nickel mesh. The electrode is synthesized by single step electro deposition technique. Synthesized electrode was characterized by SEM, EDAX and AFM techniques to know the surface morphology, composition and thickness of the catalyst respectively. The electro catalytic behavior of the nickel for methanol oxidation was evaluated using cyclic voltammetry technique. As the DMFC is compatible with both the acidic and alkaline electrolytes the working of the nickel mesh electrode is analyzed in both media. The results showed maximum current density of 0.025 and 0.030 A/cm² in alkaline and acidic medium respectively with less potential around 0.4 and 0.2 V. The other parameters such as varying the concentration of methanol, electrolyte medium, scan rate and thickness of the catalytic layer were analyzed and optimized.