Sol–gel titania coating on unmodified and surface-modified polyimide films

Sol–gel coating of metal oxides on polymer substrates is a useful process to fabricate various organic–inorganic hybrid materials under mild conditions. However, this process is hardly applicable to pristine polyimide (PI) films because their surfaces do not display effective functional groups for metal oxide coatings. In this study, we firstly examined direct sol–gel coating of titania thin layers on unmodified PI film surfaces. The results confirmed homogeneous, ultrathin titania layer coating and showed that the thickness and microscopic morphology of the titania layers were affected by titanium alkoxide concentrations in the spin coating solutions. We next investigated titania layer coating on surface-modified PI films that prepared using alkaline hydrolysis, which generated carboxylic acid groups on the film surfaces. Optimal hydrolysis time was determined using FT-IR spectroscopy and contact angle measurements. After sol–gel titania coating on the hydrolyzed PI film surfaces, the Scotch tape test was conducted to evaluate adhesion strength between the titania layers and PI film surfaces. Morphological observations of the sample surfaces after the tests clearly showed that surface modification of PI films increased titania layer adhesions. Effect of hydrothermal treatments on film formability and adhesion strength between titania-PI film interfaces was also evaluated.     

A facile route to a highly stabilized hierarchical hybrid of titania nanotube and gold nanoparticle

A hierarchical hybrid of gold nanoparticles and titania nanotubes with high metal loading was prepared by a one-pot approach using a natural cellulosic substance as template. Gold nanoparticles were uniformly anchored onto titania nanotubes, and particle fusion at high temperature was suppressed by surface coating with an ultrathin titania layer.     

多孔二氧化钛薄膜涂层的制备和双亲性质研究

二氧化钛因其具有光催化等性能而备受关注 [1] .其薄膜材料在紫外光的照射下 ,能产生活泼自由基 ,自由基能分解有机化合物 ,具有杀菌和自清洁作用 ;同时在紫外光照射时也能诱导材料产生超双亲特性 (油或水在其表面的接触角为 0°) ,赋予材料许多重要的应用 [2～ 4 ] .但二氧化钛薄膜材料表面的超双亲特性在停止紫外光照射后逐渐变弱 ,接触角也随放置时间的增加而增加 [5] .因此需要制备一种不需紫外光照射就具有永久双亲性能的薄膜涂层 .近期的研究表明 ,一些具有孔结构的薄膜涂层具有永久的双亲性能 ,该性能是由涂层本身的多孔性和平均孔尺…     

Formation of metallic Ni nanoparticles on titania surfaces by chemical vapor reductive deposition method

Metallic Ni nanoparticles were successfully prepared on the surface of titania thin film substrate by a novel method, named as chemical vapor reductive deposition (CVRD) method. The growth of the nanoparticles was based on the specific adsorption and heterogeneous nucleation on the surface of substrate, not via vapor-phase formation and subsequent sedimentation. The nanoparticle size was found to be well controllable between 10 and 30 nm by the preparation time and vapor pressure of metal complex precursor. ESCA and electron diffraction results clearly demonstrated Ni nanoparticles as metallic. Titania thin film with metallic Ni nanoparticles on its surface showed high efficiency in their photocatalysis of hydrogen evolution from decomposition of ethanol.     

SiO2含量对钛/硅复合氧化物聚酯催化剂性能的影响

研究了钛/硅复合氧化物聚酯催化剂中,二氧化硅含量对聚对苯二甲酸乙二醇酯缩聚反应的影响.催化剂XRD谱图表示,增加二氧化硅含量会抑制二氧化钛的结晶.随着二氧化硅含量的增加,钛/硅催化剂表面Lewis酸的数目和强度都减小.比表面积和Lewis表面酸性都会影响钛/硅催化剂的活性.     

Cellulose nanocrystal submonolayers by spin coating

Dilute concentrations of cellulose nanocrystal solutions were spin coated onto different substrates to investigate the effect of the substrate on the nanocrystal submonolayers. Three substrates were probed: silica, titania, and amorphous cellulose. According to atomic force microscopy (AFM) images, anionic cellulose nanocrystals formed small aggregates on the anionic silica substrate, whereas a uniform two-dimensional distribution of nanocrystals was achieved on the cationic titania substrate. The uniform distribution of cellulose nanocrystal submonolayers on titania is an important factor when dimensional analysis of the nanocrystals is desired. Furthermore, the amount of nanocrystals deposited on titania was multifold in comparison to the amounts on silica, as revealed by AFM image analysis and X-ray photoelectron spectroscopy. Amorphous cellulose, the third substrate, resulted in a somewhat homogeneous distribution of the nanocrystal submonolayers, but the amounts were as low as those on the silica substrate. These differences in the cellulose nanocrystal deposition were attributed to electrostatic effects: anionic cellulose nanocrystals are adsorbed on cationic titania in addition to the normal spin coating deposition. The anionic silica surface, on the other hand, causes aggregation of the weakly anionic cellulose nanocrystals which are forced on the repulsive substrate by spin coating. The electrostatically driven adsorption also influences the film thickness of continuous ultrathin films of cellulose nanocrystals. The thicker films of charged nanocrystals on a substrate of opposite charge means that the film thickness is not independent of the substrate when spin coating cellulose nanocrystals in the ultrathin regime (<100 nm).     

Aerosol assisted chemical vapor deposition using nanoparticle precursors: a route to nanocomposite thin films

Gold nanoparticle and gold/semiconductor nanocomposite thin films have been deposited using aerosol assisted chemical vapor deposition (CVD). A preformed gold colloid in toluene was used as a precursor to deposit gold films onto silica glass. These nanoparticle films showed the characteristic plasmon absorption of Au nanoparticles at 537 nm, and scanning electron microscopic (SEM) imaging confirmed the presence of individual gold particles. Nanocomposite films were deposited from the colloid concurrently with conventional CVD precursors. A film of gold particles in a host tungsten oxide matrix resulted from co-deposition with [W(OPh)(6)], while gold particles in a host titania matrix resulted from co-deposition with [Ti(O(i)Pr)(4)]. The density of Au nanoparticles within the film could be varied by changing the Au colloid concentration in the original precursor solution. Titania/gold composite films were intensely colored and showed dichromism: blue in transmitted light and red in reflected light. They showed metal-like reflection spectra and plasmon absorption. X-ray photoelectron spectroscopy and energy-dispersive X-ray analysis confirmed the presence of metallic gold, and SEM imaging showed individual Au nanoparticles embedded in the films. X-ray diffraction detected crystalline gold in the composite films. This CVD technique can be readily extended to produce other nanocomposite films by varying the colloids and precursors used, and it offers a rapid, convenient route to nanoparticle and nanocomposite thin films.     

应用于热控的壳厚可控核壳结构SiO2@TiO2颗粒制备

利用St觟ber方法合成了平均粒径在800 nm,球形度、单分散性良好的SiO2微球,再将其作为制备核壳结构SiO2@TiO2颗粒的内核。利用钛酸四丁酯水解反应,在SiO2内核上包覆制备了壳厚在30～100 nm的TiO2壳层,TiO2壳层厚度可根据水解反应中钛酸四丁酯的量调控。将制得的SiO2@TiO2核壳结构颗粒在550℃煅烧1 h,氧化钛壳层的晶型转变为锐钛矿相,晶型转变为锐钛矿相的TiO2更适合作为填料应用于近红外反射涂层。本文合成厚度可控SiO2@TiO2微球的方法是一种改进的溶胶凝胶方法,即在溶胶凝胶方法的基础上增加水热合成工艺。另外,本合成方法工艺简单,无表面活性剂或者耦合剂的引入。     

Close-packed colloidal crystalline arrays composed of silica spheres coated with titania

Titania coated monodisperse silica spheres have been synthesized and fabricated as a close-packed colloidal crystalline array. We have demonstrated that the coated colloidal sphere can be used to control the peak position of the optical stop band through variation of the coating thickness. The titania coated silica spheres were prepared by the layer-by-layer assembly coating process, which reciprocally laminates the cationic polyelectrolyte and the anionic titania nanosheets on a monodisperse silica spheres, and were sintered to change the titania nanosheets to anatase. The Bragg diffraction peak of the colloidal crystalline array shifted to the long wavelength region with an increase of thickness of the titania layer. Angle-resolved reflection spectra measurements clarified that the red shift was caused by increasing of the refractive index with increase of the thickness of the layer. The current work suggests new possibilities for the creation of advanced colloidal crystalline arrays with tunable optical properties from tailored colloidal spheres.     

Control of silica shell thickness and microporosity of titania-silica core-shell type nanoparticles to depress the photocatalytic activity of titania

Titania is of potential interest as an ultraviolet (UV) radiation blocking material in personal care products because of its excellent UV light absorption properties. Its high photocatalytic activity, however, facilitates the generation of reactive oxygen species, which can oxidize and degrade other ingredients during its formulation, raising safety concerns. Dense coating of titania nanoparticles with a silica layer could help in depression of their photocatalytic activity by disturbing the formation of radicals produced by the reaction of oxygen and/or water with the electron-hole pair. Depression of the high photocatalytic activity of titania necessitates that the silica shell has to be thick, with minimum microporosity. Coating parameters were optimized to attain greater amounts of precipitated silica and thicker shells with lower microporosity, which in turn resulted in great depression of photocatalytic activity. Silica-coated titania nanoparticles were characterized by TEM, XPS, FT-IR, EDX, and microporosity measurements. The photocatalytic activity was evaluated for the coated powder to investigate the efficiency of the silica coating as well.     

Spontaneous coating of carbon nanotubes with an ultrathin polypyrrole layer

A novel protocol for precisely coating individual multiwall carbon nanotubes (MWCNTs) with an ultrathin layer of polypyrrole was developed. The nanocoated MWCNTs were successfully prepared by in situ chemical deposition of polypyrrole in an aqueous suspension of MWCNTs. The coating layer was very uniform and the thickness of the layer was determined by controlling the monomer concentration used, which gave nanometer precision. The products were characterized by transmission electron microscopy, scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, electron energy loss spectroscopy, and conductivity and current-voltage measurements. The ultrathin polypyrrole layer could electrically insulate individual MWCNTs.     

Preparation of metallodielectric composite particles with multishell structure

In this article, we demonstrated the synthesis of metallodielectric composite particles comprising a metal shell on a dielectric core and an outer coating of an insulating dielectric layer by depositing silver on silica supporting cores followed by coating of titania. A combination of surface reaction and surface seeding techniques is exploited for the formation of a complete silver shell on silica spheres. The additional outer coating of titania on silver shell particles is then performed by hydrolyzing tetra-n-butyl titanate in ethanol at room temperature. The morphologies of silver shells and titania coating are studied with electron microscopy, and their existences are confirmed with X-ray diffraction and energy-dispersive X-ray measurement.     

Enhanced removal of bilirubin on molecularly imprinted titania film

Titania film imprinted by bilirubin molecule at the surface of quartz crystal was prepared using molecular imprinting and surface sol-gel process. The molecularly imprinted titania film was characterized by FTIR spectra, and the interaction between bilirubin and imprinted film was investigated using quartz crystal microbalance (QCM) technique. Compared with pure titania film, the molecularly imprinted titania film exhibits a much higher adsorption capacity for the target molecule, and the adsorption kinetic parameter estimated from the in situ frequency measurement is about 1.6×10(8) M(-1), which is ten times higher than that obtained on pure titania film. The photocatalytic measurements indicate that the bilirubin adsorbed on molecularly imprinted titania film can be completely removed under UV illumination. Moreover, our study indicates that the molecularly imprinted titania film possesses a better stability and reusability.     

Preparation of nearly monodisperse multiply coated submicrospheres with a high refractive index

Nearly monodisperse SiO2/TiO2/SiO2 multiply coated submicrospheres with nearly monodisperse silica submicrospheres as cores, thick titania layers, and thin silica skin were prepared to increase the refractive index of complex submicrospheres while keeping their near monodispersity and perfect surface properties. Nearly monodisperse colloidal silica submicrospheres as cores with a diameter of 200 nm were synthesized by a seeding technique on the basis of the hydrolysis of tetraethyl orthosilicate (TEOS) in an aqueous ethanol solution with ammonia as catalyst. On the basis of the hydrolysis of tetrabutyl orthotitanate, a procedure combining continuous feeding with multistep coating was determined to prepare titania coatings about 40 nm thick and increase the refractive index of the complex submicrospheres. The hydrolysis of TEOS was still used to get the outmost silica coating about 10 nm thick on titania coated silica submicrospheres to eliminate random aggregation caused by the TiO2 surface properties of the TiO2/SiO2 complex submicrospheres during the final fabrication of photonic crystals.     

具有多级复合孔TiO2薄膜的合成及吸附DNA的性能

本文以高分子聚合物(F127)为模板, 以强疏水的1,3,5-三甲基苯为有机添加物, 通过旋转覆膜的方法制备出具有多级复合孔的二氧化钛晶体薄膜, 并采用TEM和SEM对样品结构进行了分析, 同时考察了这种薄膜对DNA分子的吸附性能.     

Hierarchical,Titania‐Coated,Carbon Nanofibrous Material Derived from a Natural Cellulosic Substance

Hierarchical, titania‐coated, nanofibrous, carbon hybrid materials were fabricated by employing natural cellulosic substances (commercial filter paper) as a scaffold and carbon precursor. Ultrathin titania films were firstly deposited by means of a surface sol–gel process to coat each nanofiber in the filter paper, and successive calcination treatment under nitrogen atmosphere yielded the titania–carbon composite possessing the hierarchical morphologies and structures of the initial paper. The ultrathin titania coating hindered the coalescence effect of the carbon species that formed during the carbonization process of cellulose, and the original cellulose nanofibers were converted into porous carbon nanofibers (diameters from tens to hundreds of nanometers, with 3–6 nm pores) that were coated with uniform anatase titania thin films (thickness ≈12 nm, composed of anatase nanocrystals with sizes of ≈4.5 nm). This titania‐coated, nanofibrous, carbon material possesses a specific surface area of 404 m² g^?1, which is two orders of magnitude higher than the titania–cellulose hybrid prepared by atomic layer deposition of titania on the cellulose fibers of filter paper. The photocatalytic activity of the titania–carbon composite was evaluated by the improved photodegradation efficiency of different dyes in aqueous solutions under high‐pressure, fluorescent mercury‐lamp irradiation, as well as the effective photoreduction performance of silver cations to silver nanoparticles with ultraviolet irradiation.     

High-density arrays of titania nanoparticles using monolayer micellar films of diblock copolymers as templates

Highly dense arrays of titania nanoparticles were fabricated using surface micellar films of poly(styrene-block-2-vinylpyridine) diblock copolymers (PS-b-P2VP) as reaction scaffolds. Titania could be introduced selectively within P2VP nanodomains in PS-b-P2VP films through the binary reaction between water molecules trapped in the P2VP domains and the TiCl(4) vapor precursors. Subsequent UV exposure or oxygen plasma treatment removed the organic matrix, leading to titania nanoparticle arrays on the substrate surface. The diameter of the titania domains and the interparticle distance were defined by the lateral scale present in the microphase-separated morphology of the initial PS-b-P2VP films. The typical diameter of titania nanoparticles obtained by oxygen plasma treatment was of the order of approximately 23 nm. Photoluminescence (PL) properties were investigated for films before and after plasma treatment. Both samples showed PL properties with major physical origin due to self-trapped excitons, indicating that the local environment of the titanium atoms is similar.     

水相一步合成锐钛矿型二氧化钛空心球

报道了水相一步直接合成晶体TiO2空心球的方法. 以水溶性的过氧化钛配合物(peroxo-titanium complex, PTC)为前驱体、聚苯乙烯(polystyrene, PS)球为模板, 在水溶液体系中可直接制备得到锐钛矿型纳米TiO2空心球. 与传统的模板法相比, 模板的包覆、去除及TiO2壳层的晶化等步骤在水相中可一步完成. 利用透射电子显微镜(TEM)、扫描电子显微镜(SEM)、X射线衍射仪(XRD)及热重分析仪(TGA)对所合成的纳米TiO2空心球进行了表征, 同时推断了可能的反应机理.     

Preparation of Titania Nanosheet-Precipitated Coatings on Glass Substrates by Treating SiO2-TiO2 Gel Films with Hot Water Under Vibrations

Titania nanosheet-precipitated coatings have been prepared by treating SiO₂-TiO₂ gel films on glass substrates with hot water at 90°C under vibration. Longitudinal vibrations at about 6 Hz during the treatment enhanced the formation of titania nanosheet. The titania nanosheet consisted of several layers with a spacing of about 0.6 nm and was identified as hydrated titania with a lepidocrocite-type structure. The morphology of the titania nanosheet-precipitated coatings is probably achieved by lowering of the concentration of hydrolyzed titania species at the surface due to rapid water flow driven by the vibrations. The coatings were transparent in the visible range and showed high photocatalytic activity and antifogging property.     

蛭石负载TiO2光催化剂的制备与性能

以新疆尉犁工业蛭石为载体,采用溶胶-凝胶法制备负载型二氧化钛光催化剂,利用XRD、TG、SEM、IR和低温N₂吸附－脱附对负载型二氧化钛进行表征,并以亚甲基蓝为目标降解物对其光催化性能进行研究。讨论了不同TiO₂负载量、反应温度和煅烧温度等因素对负载型二氧化钛光催化性能的影响,结果表明：TiO₂负载量为4.0wt%,反应温度为40 ℃,煅烧温度为400 ℃时,复合材料光催化效果最好,经60 W紫外灯照射20 min后,TiO₂/VMT复合材料对亚甲基蓝溶液的降解率为92.08%。