Quantitative Trennung von Schwermetallen mit Chelataustauschern auf der Basis von Polystyrol

Zusammenfassung Die Trennung und Isolierung von folgenden Schwermetallen bei einem hohen Überschuß an Fremdionen mit Hilfe neuer selektiver Chelataustauscher wird beschrieben: Cu²⁺/Zn²⁺, Cu²⁺/Pb²⁺, Ag⁺/Cu²⁺, Ag⁺/Pb²⁺, Hg²⁺/Zn²⁺, Hg²⁺/Cd²⁺; Abtrennung von Hg²⁺. Unter gleichen Bedingungen war mit dem handelsüblichen Austauscher Dowex A-1 keine Trennung möglich.

---

Quantitative separation of heavy metals by means of chelating exchangers based on polystyrol

Summary The separation and isolation of the following heavy metals in presence of a high excess of foreign ions by means of new selective chelating exchangers is described: Cu²⁺/Zn²⁺, Cu²⁺/Pb²⁺, Ag⁺/Cu²⁺, Ag⁺/Pb²⁺, Hg²⁺/Zn²⁺, Hg²⁺/Cd²⁺; separation of Hg²⁺. Under the same conditions no separation could be achieved by the ion-exchanger Dowex A-1.

     

Photoactive chemosensors 4: a Cu protein cavity mimicking fluorescent chemosensor for selective Cu recognition

Fluorescent chemosensor 3 can sense Cu²⁺ ions (1-8 μM) even in the presence of elevated levels of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Ag⁺ and Pb²⁺ (5000 μM). 3 can also analyze for Ag⁺ ions (50-500 μM) in the presence of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ (5000 μM) but Cu²⁺ strongly interferes.     

Determination of Cd and Pb on glassy carbon electrode modified by electrochemical reduction of aromatic diazonium salts

Carbon modified by the reduction of aromatic diazonium derivatives was first used as electrode for the electrochemical stripping analysis of heavy metals. As a model, the glassy carbon electrode was modified with benzoic acid by electrochemical reduction of diazobenzoic acid, and the resulting modified electrodes were used for determination of Cd²⁺ and Pb²⁺. The anodic peak currents of cadmium and lead at the benzoic acid-modified glassy carbon electrode are 7.2 and 6 times of that at the bare glassy carbon electrode. A linear response was observed for Pb²⁺ and Cd²⁺ in the range of 0.5–50 μg/l. The detection limits are 0.20 μg/l for Pb²⁺ and 0.13 μg/l for Cd²⁺. The relative standard deviations for six consecutive measurements of 50 μg/l Cd²⁺ and 50 μg/l Pb²⁺ are 0.82% and 3.02%, respectively. Applicability of the sensor to the determination of Cd²⁺ and Pb²⁺ in sewerage samples was demonstrated.     

Rhodamine-Appended Bipyridine: XOR and OR Logic Operations Integrated in an Example of Controlled Metal Migration

A new bipyridyl derivative 1 bearing rhodamine B as visible fluorophore was designed, synthesized and characterized as a fluorescent and colorimetric sensor for metal ions. Interaction with Cu²⁺, Zn²⁺, Cd²⁺, Hg⁺, and Hg²⁺ ions was followed by UV/Vis and emission spectroscopy. Upon addition of these metal ions, different colorimetric and fluorescent responses were observed. “Off-on-off” (Cu²⁺, Zn²⁺, and Hg²⁺) and “off-on” (Hg⁺ and Cd²⁺) systems were obtained. Probe 1 was explored to mimic XOR and OR logic operations for the simultaneous detection of Hg⁺–Cu²⁺ and Hg⁺–Zn²⁺ pairs, respectively. DFT calculations were also performed to gain insight into the lowest-energy gas-phase conformation of free receptor 1 as well as the atomistic details of the coordination modes of the various metal ions.     

Synthesis of a Dithiocarbamate Chelate Resin and Its Oxidized form and Their Adsorption Properties for Heavy Metal Ions

A series of macroporous dithiocarbamate chelate resins, III and V, and an oxidized resin, VI, with high adsorption capacity were prepared. The influence of various reaction conditions of amination, dithiocarboxylation, and oxidation were examined. The structure and the conversion of functional groups of resins were confirmed by IR spectra and elemental analysis. The adsorption capacities of Resin II for Hg²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ are 4.40, 2.44, 1.77, and 1.36 mmol/g, respectively. The adsorption capacities of Resins V and VI for Cu²⁺. Zn²⁺, Ni²⁺, Co³⁺, Ag⁺, Hg²⁺, Cd²⁺, Pb²⁺, and Au³⁺ are 4.07–0.51 and 3.81–0.59 meq ion/g, respectively. The adsorption rate and the influence of pH on the adsorption percentage of the resins for metal ions were examined. Noble metal, transitional metal, and heavy metal ions can be quantitatively adsorbed by the resins. The adsorbed Cu²⁺, Pb²⁺, Cd²⁺, Co³⁺, and Ni²⁺ can be quantitatively eluted with 5N HNO₃, and the presence of large amounts of Ca²⁺, Mg²⁺, Fe³⁺, and Al³⁺ did not interfere.     

A chelating resin with bis[2-(2-benzothiazolylthioethyl)sulfoxide]: Synthesis, characterization and properties for the removal of trace heavy metal ion in water samples

A new chelating resin containing bis[2-(2-benzothiazolylthioethyl)sulfoxide] was synthesized using chloromethylated polystyrene as material and characterized by elemental analysis and infrared spectra. The adsorption capacities of the newly formed resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were investigated over the pH range 1.0-6.0. The resin exhibited no affinity for alkali or alkaline earth metal ions. The maximum adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were 1.49, 0.96, 0.58, 0.11, 0.37, 0, 0.24, 0.36 and 0.25 mmol g⁻¹, respectively. In column operation it had been observed that Hg²⁺ and Ag⁺ in trace quantity could be separated from different binary mixtures and Hg²⁺ could be effectively removed from industrial wastewater and the natural water spiked with Hg²⁺ at usual pH.     

Spectrophotometric study of complexation of dibenzopyridino-18-crown-6 with some transition and post-transition metal ions in DMSO solution using murexide as a metallochromic ligand

The complexation reaction of dibenzopyridino-18-crown-6 (DBPY 18C6) with Co²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Cd²⁺, Hg²⁺, and Ag⁺ have been studied in DMSO at 25°C by the spectrophotometric method. Murexide was used as a competitive colored ligand. The stoichiometry of metal ion-murexide and metal ions with DBPY18C6 complexes were estimated by mole ratio and continuous variation methods and emphasized by the KINFIT program. The stoichiometry of all the complexes was found to be 1: 1 (metal ion/ligand). The order of stability constants for the obtained metal ion-murexide complexes (1: 1) varies in the order Cu²⁺ > Cd²⁺ > Co²⁺ ∼ Pb²⁺ > Zn²⁺ > Ag⁺ > Hg²⁺. This trend shows that the transition metal ions clearly obey the Irving-Williams role. For the post-transition metal ions, the ionic radius and soft-hard behavior was the major affects in varying of this order. The dibenzopyridino-18-crown-6 complexes with the used metal ions vary as Ag⁺ > Pb²⁺ > Cu²⁺ > Cd²⁺ > Hg²⁺ > Zn²⁺ > Co²⁺. The article is published in the original.     

Quenching effect of some heavy metal ions on the fast peroxyoxalate-chemiluminescence of 1-(dansylamidopropyl)-1-aza-4,7,10-trithiacyclododecane as a novel fluorophore

The fast chemiluminescence (CL) arising from the reaction of bis(2,4,6-trichlorophenyl)oxalate (TCPO) with hydrogen peroxide in the presence of 1-(dansylamidopropyl)-1-aza-4,7,10-trithiacyclododecane (L) as a novel fluorophore, and imidazole as catalyst, has been studied in ethyl acetate solution. The relationships between the chemiluminescence intensity and concentrations of TCPO, imidazole, hydrogen peroxide and L are reported. In the presence of imidazole as catalyst, the entire CL signal was completed in less than 3 s. The quenching effect of Cu²⁺, Pb²⁺, Cd²⁺, Hg²⁺ and Ag⁺ ions on the chemiluminescent system was investigated, the resulting Stern–Volmer plots were obtained and the K_Q values were calculated. It was found that the quenching effect of metal ions on the chemiluminescence of L decreases in the order Cu²⁺ > Pb²⁺ > Cd²⁺ > Hg²⁺ > Ag⁺.     

Complexation of metal ions with double-armed diazadithia lariat ether carrying anthracene moieties in acetonitrile–dioxane

A new 14-membered crown ether with nitrogen–sulfur donor atom carrying two anthryl groups was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-(chloromethyl) anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligand was investigated in acetonitrile–dioxane solution (1/1) by means of absorption and emission spectrometry. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constant of the novel ligand with Fe²⁺, Fe³⁺, Al³⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Hg²⁺ cations. Absorption spectra show isobestic points in the spectrophotometric titration of these cations. The presence of excess of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ cations caused an enhancement of anthryl fluorescence. Especially, the enhancement in case of the interaction of Hg²⁺ and Al³⁺ cations with the ligand was pronounced.     

Heavy Metal Removal from Synthetic Solutions with Magnetic Beads Under Magnetic Field

The aim of this study is to prepare magnetic beads which can be used for the removal of heavy metal ions from synthetic solutions. Magnetic poly(ethylene glycol dimethacrylate‐vinyl imidazole) [m‐poly(EGDMA‐VIM)] beads were produced by suspension polymerization in the presence of magnetite Fe₃O₄ nano‐powder. The specific surface area of the m‐poly(EGDMA‐VIM) beads was found to be 63.1 m²/g with a size range of 150–200 µm in diameter and the swelling ratio was 85%. The average Fe₃O₄ content of the resulting m‐poly(EGDMA‐VIM) beads was 12.4%. The maximum binding capacities of the m‐poly(EGDMA‐VIM) beads were 32.4 mg/g for Cu²⁺, 45.8 mg/g for Zn²⁺, 84.2 mg/g for Cd²⁺and 134.5 mg/g for Pb²⁺. The affinity order on mass basis is Pb²⁺>Cd²⁺>Zn²⁺>Cu²⁺. Equilibrium data agreed well with the Langmuir model. pH significantly affected the binding capacity of the magnetic beads. Binding of heavy metal ions from synthetic wastewater was also studied. The binding capacities were 26.2 mg/g for Cu²⁺, 33.7 mg/g for Zn²⁺, 54.7 mg/g for Cd²⁺ and 108.4 mg/g for Pb²⁺. The magnetic beads could be regenerated up to about 97% by treating with 0.1 M HNO₃. These features make m‐poly(EGDMA‐VIM) beads a potential candidate for support of heavy metal removal under magnetic field.     

Preparation of o.o'-dichlorodithizone and a study of its metal complexing properties

o,o'-Dichlorodithizone was synthesised and its spectral characteristics were measured in carbon tetrachloride. The pH ranges for quantitative extraction of various metal complexes were determined. Values for wavelengths of maximum absorption and molar extinction coefficients are g'ven; the former increase in the order Ag⁺< Hg²⁺< Bi³⁺< Pb²⁺< Cd²⁺< Zn²⁺< Cu²⁺ and the latter in the order Ag⁺< Bi³⁺< Cu²⁺< Hg²⁺< Pb²⁺< Cd²⁺< Zn²⁺. Substitution of chlorine produces a regular bathochromic shift in wavelength of maximum absorption for reagent and their metal complexes compared to the dithizonates. No evidence was found that a ”steric effect“ of the o-substituent interferes with chelate ring formation for Zn, Cd, Hg and Pb; the results confirm, the view that complex formation takes place through the thio-H of the reagent. The extractability of lead as its o-dichlorodithizonate into carbon tetrachloride was investigated in the pH range 5–11 and the extraction constant was measured.     

A reactive electrode (reactrode) for the voltammetric determination of heavy metals in laboratories and for use as a passive monitor in remote analysis

The use of a reactive electrode (reactrode) consisting of graphite, a solid ion exchanger (HYPHAN) and paraffin for the batch analysis of Cd²⁺, Cu²⁺, Pb²⁺ and Hg²⁺ in aqueous samples and as a passive monitor for these metal ions is described. The metal ions are accumulated on the reactrode surface at an open-circuit potential in an ion-exchange reaction. After the accumulation, the ion exchanger-bonded metal ions are reduced to the metals which remain on the electrode surface. In a following step, the metals are anodically dissolved which is recorded by differential-pulse voltammetry. The 3s detection limits for the analysis of drinking water are: 1.1×10^-7 mol/l for Pb²⁺, 5×10^-8 mol/l for Hg²⁺ and 2.4×10^-7 mol/l for Cu²⁺.The reactrode developed can be used for the passive monitoring of heavy metals in aqueous streams if the reactrode is mounted in a wall-jet cell which is part of a flow-through system. Using this arrangement, it has been possible to determine Hg²⁺, Cu²⁺ and Pb²⁺ in drinking water after 20 hours of accumulation.     

Open-chain polyazaalkanes functionalised with pyrene groups as sensing fluorogenic receptors for metal ions

The new open-chain polyazaalkanes ligands L¹, L², L³ and L⁴ functionalised with one or two pyrene groups were synthesised and characterised and their potential use as selective cation and anion sensing chemosensors studied. Solution studies by potentiometric methods were carried out in the presence of the metal cations Cu²⁺ and Zn²⁺ in acetonitrile–water (70:30 v/v, 0.1 mol dm⁻³ tetrabutylammonium perchlorate, 25 °C) The results are compared with those reported for the analogous non-functionalised ligand triethylentetraamine (tta). The fluorescence behaviour of the ligands L¹–L⁴ has been studied as a function of the pH in the presence of the metal cations Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ in acetonitrile–water 70:30 v/v mixtures. The Zn²⁺ and Cd²⁺ cations enhance the fluorescence emission of the L¹–L⁴ chemosensors at basic pH, whereas Cu²⁺ induce quenching of the fluorescence emission at acid pH. The fluorescence behaviour of L¹–L⁴ receptors was also studied as a function of the pH in acetonitrile–water 70:30 v/v in the presence of anions.     

Nanometer-sized alumina coated with chromotropic acid as solid phase metal extractant from environmental samples and determination by inductively coupled plasma atomic emission spectrometry

A method for solid phase extraction of trace metals such as Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ using nanometer-sized alumina coated with chromotropic acid prior to determination by inductively coupled plasma atomic emission spectrometry (ICP-AES) has been developed. Various influencing parameters on the separation and preconcentration of trace metals, pH, flow rate, sample volume, amount of adsorbent, concentration of eluent and sorption kinetics have been studied. The detection limits for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ were found to be 0.14, 0.62, 0.22, 0.54, 0.27, 0.28, 0.53 and 0.38 ng ml^− 1, respectively. The adsorption capacity of the solid phase adsorption material is 10.3, 11.3, 14.5, 16.4, 15.1, 11.7, 15.4 and 16.8 mg g^− 1 for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni^2+, Pb²⁺ and Zn²⁺, respectively. The preconcentration factor was obtained in the range of 50-100 for all studied metal ions. Coexisting ions over a high concentration range have not shown any significant effects on the determination of aforesaid metal ions. The accuracy of the proposed method was tested by standard reference materials (NIST 1643e: water, NIST 1573a: tomato leaves and NIST 1568a rice flour) and natural waters and the results obtained were in good agreement with the certified values.     

Syntheses,structures of N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes and their application as redox sensor for Cu2+ ion

Rigid N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes L1 and L2 were easily synthesized from 1,1 ‐dicarboxyaldehydeferrocene and the corresponding amines. Ligands L1 and L2 were characterized by ¹H NMR, ¹³C NMR and single‐crystal X‐ray crystallography. The coordination abilities of L1 and L2 with metal ions such as Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ were evaluated by cyclic voltammetry. The electrochemical shift (ΔE_1/2) of 125 mV was observed in the presence of Cu²⁺ ion, while no significant shift of the Fc/Fc + couple was observed when Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺, Cd²⁺ metal ions were added to the solution of L1 in the mixture of MeOH and H₂O. Moreover, the extent of the anodic shift of redox potentials was approximately equal to that induced by Cu²⁺ alone when a mixture of Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ was added to a solution of L1. Ligand L1 was proved to selectively sense Cu²⁺ in the presence of large, excessive first‐row transition and late‐transition metal cations. The coordination model was proposed from the results of controlled experiments and quantum calculations. Copyright © 2012 John Wiley & Sons, Ltd.     

Complexation of metal ions with the novel diazadithia crown ether carrying two anthryl pendants in acetonitrile–tetrahydrofuran

A new crown ether carrying two anthryl groups with nitrogen–sulfur donor atom was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-chloromethyl anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligand was investigated in acetonitrile–tetrahydofuran solution (1/1) by means of absorption and emission spectrometry. Absorption spectra show isosbestic points in the spectrophotometric titration of Fe²⁺, Fe³⁺, Al³⁺, Cu²⁺ and Hg²⁺. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constant of the novel ligand with Fe²⁺, Fe³⁺, Al³⁺, Cu²⁺and Hg²⁺cations. The presence of excess amounts of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ cations caused an enhancement of anthryl fluorescence. The ligand showed good sensitivity for Zn²⁺ with respect to other metal cations with linear range and detection limit of 1.4 × 10^?7 to 4.1 × 10^?6 M and 1.0 × 10^?8 M respectively.     

Combined Effects of Heavy Metal Ions on Bacteria and the Determination of Heavy Metals by Bioassay

In the framework of the development of bioassay, a procedure was developed for studying the combined effects of heavy metal ions on bacteria. The bacterium Bacillus subtilis niger was proposed as an analytical indicator. A universal calculation system was developed that allows one to obtain and analyze functional models of toxicity and the combined effects of toxicants. Models for the action of Zn²⁺–Cu²⁺, Zn²⁺–Cd²⁺, Zn²⁺–Cu²⁺–Cd²⁺, and Zn²⁺–Cu²⁺–Cd²⁺–Hg²⁺ mixtures on Bacillus subtilis niger were obtained and studied, and are discussed for the first time. The effect of the type of the nutrient medium on the character and structure of the combined effects was studied. The resulting models were applied to the determination of concentrations of heavy metal ions in mixtures.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

Preparation and metal binding behavior of poly(4-vinylbenzyl 2-hydroxyethyl) sulfoxide and sulfone

In order to explore the reuse properties of oxidized chelating resin containing sulfur after adsorption, two kinds of novel chelating resins, poly[4-vinylbenzyl-(2-hydroxyethyl)] sulfoxide (PVBSO) and poly[4-vinylbenzyl-(2-hydroxyethyl)] sulfone (PVBSO₂), were synthesized using poly[4-vinylbenzyl-(2-hydroxyethyl)] sulfide (PVBS) as material. Their structures were confirmed by FTIR and XPS. The adsorption properties and mechanism for metal ions such as Au³⁺, Pt⁴⁺, Pd²⁺, Hg²⁺, Cu²⁺, Ni²⁺, Fe³⁺, Pb²⁺, Cd²⁺, and Zn²⁺ were investigated. Experimental results showed that PVBSO had good adsorption and selective properties for Au³⁺, Pd²⁺ and Cu²⁺ when the coexisting ion was Pt⁴⁺, Ni²⁺, Pb²⁺ or Cd²⁺. In the aqueous system containing Cu²⁺ and Pb²⁺ or Cu²⁺ and Cd²⁺, PVBSO₂ only adsorbed Cu²⁺. The selective coefficients of PVBSO and PVBSO₂ were α_Au/Pt = 4.8, α_Au/Pd = 11.8, α_Pd/Pt = 10.9, α_Cu/Ni = 2.5, α_Cu/Cd = 41.2, α_Cu/Pb = ∞, α_Cu/Ni = 3.0, α_Cu/Cd = ∞, α_Cu/Pb = ∞, respectively.     

1,8-萘酰亚胺为发色团的Zn2+荧光探针的合成及性能研究

合成了以1,8-萘酰亚胺为发色团,以联吡啶为离子受体的Zn²⁺荧光探针,并进行了表征及离子识别性能的研究。研究表明该化合物对Zn²⁺具有良好的识别性能,同时相对于Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Hg²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺等金属离子具有良好的选择性。