Effects of polystyrene-b-poly(aminomethyl styrene)s as stabilizers on dispersion polymerization of styrene in alcoholic media

The effects of polystyrene-b-poly(aminomethyl styrene) (PS_n-b-PAMS_m) stabilizers on the particle size (D_n) and size distribution (PSD) in dispersion polymerization of styrene were investigated. The block copolymers, PS_n-b-PAMS_m, were prepared as follows: (i) atom transfer radical polymerization (ATRP) of styrene (PS-Br), (ii) ATRP of vinylbenzylphthalimide with the PS-Br (PS-b-PVBP), and (iii) treatment of the PS-b-PVBP with hydrazine. When the dispersion polymerization of styrene proceeded at 60 °C in ethanol with PS₁₉-b-PAMS₁₃₀ stabilizer, spherical polystyrene particles with D_n=0.91 μm (PSD = 1.01) were obtained. The particle size was strongly affected by the copolymer composition. With an increase in PAMS block length from m=54 to 100 in PS₁₇-b-PAMS_m, particle diameter became smaller from 1.55 to 0.91 μm. On the other hand, an increase in the length from m=20 to 82 in PS₃₄-b-PAMS_ms caused an increase in particle size from 0.35 to 0.70 μm. Titration of the particles suggests that 14–81% of stabilizers used in the polymerization system were attached on the polystyrene particle surfaces, depending on the composition of the block copolymers. Thus, for the dispersion polymerization of styrene, PS_n-b-PAMS_m block copolymers have both functions as a stabilizer during polymerization and surface-modification sites of polystyrene particles.     

三嵌段共聚物PAN-b-PEG-b-PAN的合成及其自组装行为的研究

利用原子转移自由基聚合(ATRP)制得了分子量可控、分子量分布窄的聚丙烯腈-b-聚乙二醇-b-聚丙烯腈P(AN-b-PEG-b-PAN)嵌段共聚物. 通过¹H NMR, FTIR, 凝胶渗透色谱(GPC)对所得产物的结构和分子量进行了表征并通过TG和DTA考察了该嵌段共聚物的热稳定性; 运用透射电子显微镜(TEM)、荧光探针技术和动态光散射(DLS)研究了P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇在溶剂水中胶束的形成、结构、形貌和胶束粒径. 结果表明, 三嵌段共聚物P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇的热稳定性较纯聚乙二醇P(EG)好, 且柔性链PEG的引入对嵌段共聚物的放热峰位置没有显著的影响. 当改变此嵌段共聚物溶液浓度时, 该嵌段共聚物会自组装成不同形状的胶束, DLS测量的胶束粒径大于TEM观察的结果, 其临界胶束浓度(cmc)约为4.46×10^－4 g•L^－1.     

Model block–graft copolymer via anionic living polymerization: Preparation and characterization of polystyrene-block-[poly(p-hydroxystyrene)-graft-poly(ethylene oxide)]-block-polystyrene

A model graft copolymer in which position of graft points was set to the center of a backbone molecule was prepared via anionic living polymerization. Polystyrene-block-poly(p-tert-butoxystyrene)-block-polystyrene (PSt-b-PBSt-b-PSt) was prepared by three-stage sequential addition. The tert-butyl group was removed from PBSt by hydrogen bromide to yield PSt-b-PHSt-b-PSt, having a poly(p-hydroxystyrene) (PHSt) block. The hydroxyl group of PHSt was reacted with dimeric potassium dianions of 1, 1-diphenylethylene (DPE-K) or cumyl potassium (cumyl K) to yield the corresponding macromolecular initiators of PSt-b-PHSt⁻K⁺-b-PSt containing the potassium alkoxide ion of PHSt. The newly formed alkoxide groups and remaining initiators of DPE-K or cumyl K are capable of initiating the additionally introduced ethylene oxide (EO). Thus, two block–graft copolymers of polystyrene-block-[poly(p-hydroxystyrene)-graft-poly(ethylene oxide)]-block-polystyrene (PSt-b-(PHSt-g-PEO)-b-PSt) were prepared by a “grafting from” process (backbone initiation). A PSt-b-PHSt-b-PSt backbone (M_n = 1.7₅ × 10⁵ by osmometry and M_w/M_n = 1.0₈ by GPC), and two PSt-b-(PHSt-g-PEO)-b-PSt block–graft copolymers (M_n = 2.4₅ × 10⁵ by osmometry and M_w/M_n < 1.1₀ by GPC) had narrow molecular weight distributions. A relationship between nonquantitative metallation and spacing of the graft points on a backbone molecule was discussed in detail. Two benzene-cast films formed clear microphase-separated structures of lamellar structure. The dependence of composition on the morphology of the block–graft copolymers was found to differ from that of common block copolymers. A degree of crystallinity of PEO segment and lamellar thickness of PEO phase serving as graft molecule were also found to differ from those of homo PEO and/or PEO segment in common block copolymer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3021–3034, 1998     

Self-assembled and Nanostructured Copolymer Aggregations of the Tertiary Amine Methacrylate Based Triblock Copolymers

The micellization behavior of novel tertiary amine methacrylate-based ABA type triblock copolymers formed by poly[2-(dimethylamino)ethyl methacrylate] [PDMA] middle block and poly[2-(diethylamino)ethyl methacrylate] [PDEA] or poly[2-(diisopropylamino)ethyl methacrylate] [PDPA] side blocks, PDPA_m-b-PDMA_n-b-PDPA_l, and PDEA_m-b-PDMA_n-b-PDEA_l was investigated. Both types of triblock copolymers were water-soluble and had potential for various applications due to their self-assembled and the bottom-up nanoscale micellar construction. The micellar aggregations of the triblock copolymers in aqueous solutions with varying comonomer ratios, molecular weights, temperatures, and pH values were investigated by small-angle X-ray scattering and dynamic light scattering. Compact micellar aggregations were obtained as 0.5 weight percent solutions at 20–21°C and pH 8.67 to 9.05, and characterized as polydispersed spherical core-shells. One group of triblock copolymer micelles had PDPA-cores with radii from 18 to 21 Å and PDMA-shell thicknesses of 89–105 Å, whereas the other group had PDEA-core spherical micelles with core radii of 60–62 Å and a PDMA-shell thicknesses of 64–66 Å.     

Effects of CO<Subscript>2</Subscript> pressure on isotropic transition of amphiphilic side-chain type liquid crystalline di-block copolymers

The effects of high pressure carbon dioxide (CO₂) on the isotropic transition of three different amphiphilic di-block copolymers, PEO_m-b-PMA(Az)_n, namely PEO₁₁₄-b-PMA(Az)₄₀, PEO₂₇₂-b-PMA(Az)₄₆ and PEO₄₅₄-b-PMA(Az)₄₇, and on PMA(Az)₃₀ homopolymer have been investigated by scanning transitiometry. Under CO₂ pressure, the isotropic transition temperature decreased with the increase of pressure up to around 30 MPa due to CO₂ sorption and increased above 40 MPa. Transition entropy of the isotropic transition indicated that the depression of the isotropic transition temperature was caused by the adsorption of CO₂ into the azobenzene moieties and that the increase above 40 MPa was caused by the desorption of CO₂ into the azobenzene moieties. Comparison between PEO_m-b-PMA(Az)_n copolymers and PMA(Az) homopolymer clarified PEO domain acted CO₂ pathway to approach the equilibrium state rapidly.     

Polymer effect on electron-donating character of polymeric donor. I. Formation of charge-transfer complex between polymers containing N,N-dimethylaniline group and maleic anhydride

The difference in electron-donating character between polymeric and monomeric donors in their charge-transfer-complex formation reactions was studied to clarify the so-called polymer effect in such reactions. Systems containing maleic anhydride and copolymers of N,N-dimethyl-p-aminostyrene (ASt) with styrene, which were prepared by a conventional free-radical polymerization technique, were found to be suitable for this purpose. In correlations between the mean sequence length μ_ASt of the ASt units in the copolymers and the lowest energy of their charge-transfer transition (λ_max) or the association constant of their complex formation K_CT, a bathochromic shift in λ_max and an increase in K_CT with increasing μ_ASt of copolymers are found. Moreover, there is a difference in their modes of μ_ASt dependence. It was concluded from these results that the electron-donating character of the dimethylaniline group increases with increasing number of groups attached on one polymer chain. Also, there is an interaction among neighboring functional groups on one polymer chain. The interaction may be regarded as a kind of polymer effect. In addition, the difference in μ_ASt dependence between λ_max and K_CT and also thermodynamics of the complex formation are discussed.     

Ionization equilibrium in salt‐containing aqueous solutions of synthetic polyampholytes

The peculiarities of ionic equilibrium in salt‐containing aqueous solutions of polyampholytes (acrylic acid–2‐methyl‐5‐vinylpyridine copolymers) of various compositions and molecular weights were studied. The protonation degree of base groups (β_iep), the dissociation degree of acid groups (α_iep), and the ionization constant of methylvinylpyridine groups (pK_b) for the isoelectric points of the studied polyampholytes under various ionic strength values (I) were assessed spectrophotometrically. The dependencies of α_iep and pK_b versus the copolymer composition in the absence of low molecular weight electrolyte are described by the following equations: pK_b = 6.2–0.037z and lg α_iep = 0.27–0.0215z, where z is the molar content of the acrylic acid units. The basicity of methylvinylpyridine groups increases in proportion to the content of acid groups at a constant ionic strength and is independent of the molecular weight and molecular weight distribution of the copolymer. The relationship between pK_b and the ionic strength of the solution for acrylic acid–methylvinylpyridine copolymers was established: pK_b(I) = pK + B · I^1/2, where pK is the thermodynamic ionization constant of base groups and B is 0.21 + 0.0065z. A good agreement between the experimental and theoretical (calculated from the given equation) values of the ionization constant, pK_b, of methylvinylpyridine groups for other polyampholytes (copolymers of methacrylic acid with 2‐methyl‐5‐vinylpyridine) demonstrated that the ionic state of polyampholytes is determined by the basicity of methylvinylpyridine groups, which depends on the copolymer composition and solution ionic strength. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1824–1831, 2000     

Synthesis and self‐assembly of amphiphilic brush‐dendritic‐linear poly[poly(ethylene glycol) methyl ether methacrylate]‐b‐ polyamidoamine‐b‐poly(ε‐caprolactone) copolymers

A series of novel amphiphilic brush‐dendritic‐linear poly[poly(ethylene glycol) methyl ether methacrylate]‐b‐polyamidoamine‐b‐poly(ε‐caprolactone) copolymers (PPEGMEMA‐b‐D_m‐b‐PCL) (m = 1, 2, and 3: the generation number of dendron) were synthesized by the combination techniques of click chemistry, atom transfer radical polymerization (ATRP), and ring‐opening polymerization (ROP). The brush‐dendritic copolymers bearing hydrophilic brush PPEGMEMA and hydrophobic dendron polyamidoamine protected by the tert‐butoxycarbonyl (Boc) groups [D_m‐(Boc) (m = 1, 2, and 3)] were for the first time prepared by ATRP of poly(ethylene glycol) methyl ether methacrylate monomer (PEGMEMA) initiated with the dendron initiator, which was prepared from 2′‐azidoethyl‐2‐bromoisobutyrate (AEBIB) and D_m‐(Boc) terminated with a clickable alkyne by click chemistry. Then, the brush‐dendritic copolymers with primary amine groups (PPEGMEMA‐b‐D_m) were obtained from the removal of the protected Boc groups of the brush‐dendritic copolymers in the presence of trifluoroacetic acid. The brush‐dendritic‐linear PPEGMEMA‐b‐D_m‐b‐PCL copolymers were synthesized from ROP of ε‐caprolactone monomer using PPEGMEMA‐b‐D_m as the macroinitiators and stannous octoate as catalyst in toluene at 130 °C. To the best of our knowledge, this is the first report that integrates hydrophilic brush polymer PPEGMEMA with hydrophobic polyamidoamine (PAMAM) dendron and PCL to form amphiphilic brush‐dendritic‐linear copolymers. The amphiphilic brush‐dendritic‐linear copolymers can self‐assemble into spherical micellar structures in aqueous solution. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and thermal analysis of linear triblock copolymers based on methacrylate ester

Two linear triblock copolymers poly(t-butyl methacrylate-b-2-hydroxyl ethyl methacrylate-b-N,N-dimethylaminoethyl methacrylate) (PtBMA₉₇-b-PHEMA₁₈-b-PDMAEMA₉₈) and poly(t-butyl methacrylate-b-glycidyl methacrylate-b-styrene) (PtBMA₁₃₇-b-PGMA₂₃-b-PSt₁₅₆) were controlled synthesized with living RAFT polymerization technique under the chain transfer of cumyl dithiobenzoate. The results of FT-IR spectra illustrate that the characteristic groups of copolymer fit well with the result of ¹H-NMR, which successfully determines the corresponding molecular structure of triblock copolymers. The thermal stability of PtBMA-b-PGMA-b-PSt and PtBMA-b-PHEMA-b-PDMAEMA was also complementarily explained by the activation energy of thermal decomposition from Friedman differential method and Ozawa–Flynn–Wall integral method. The results show that the degradation energy of the former copolymer was much higher than that of the latter copolymer, because the aromatic groups were introduced into the polymer segments of the former copolymer during the RAFT polymerization process, and the other reason is the oxirane rings are typically reactive which they occurred intermolecular crosslinking reaction during the thermal decomposition.     

Synthesis and dielectric properties of novel liquid crystalline triblock copolymers with cyanobiphenyl moieties and poly(n‐butyl acrylate) segments

In this work, self‐assembly method was used to improve the dielectric constant of triblock copolymers. A series of ABA triblock copolymers with a defined length of poly(n‐butyl acrylate) (PBA, B block) segment and different lengths of liquid crystalline (LC) poly[11‐(4‐cyano‐4′‐biphenoxy)undecyl methacrylate] (P11CBMA, A block) segments were synthesized by using the atom transfer radical polymerization method. The well‐defined triblock copolymers P11CBMA_m‐b‐PBA_n‐b‐P11CBMA_m possess three different B/A ratios (n = 50, m = 17, 43, 53). Due to the supramolecular cooperative motion effect, the copolymers can form worm‐like microstructure (W_LC = 52.8%), cylinder‐like nanostructure with P11CBMA phase embedded in PBA matrix (W_LC = 73.9%), and wide stripe structure with LC domains distributed unevenly in a continuous PBA matrix (W_LC = 77.7%) after annealed at 160°C (above T_i) under N₂ for 24 h, respectively. In order to study the influence of microphase separated morphology of triblock copolymer on the dielectric properties, solvent annealing was also used to develop various nanostructures. After thermal or solvent annealing, the dielectric constants of block copolymers increased dramatically while their loss factors remained the same. For different block copolymers, the dielectric constants increased with the increase of the LC block length. For diverse treatments, dielectric permittivities of samples varied widely with different nanostructures. The results show that the dielectric constants of block copolymers could be tuned by the block ratios and the self‐assembled microstructures. These findings will inspire researchers using self‐assembly method to design and develop novel flexible materials with high dielectric permittivity. Copyright © 2014 John Wiley & Sons, Ltd.     

Isotropic transition behaviour of an amphiphilic di-block copolymer under pressure

The present work deals with the interactions between carbon dioxide, used as pressure medium, either in the gas state (GCO₂) or in the supercritical state (SCCO₂) and amphiphilic di-block copolymers PEO_m-b-PMA(Az)_n. The effect of pressure on the isotropic transition of the PEO_m-b-PMA(Az)_n copolymer was investigated using scanning transitiometry (ST). The experimental results were compared with those measured when using ‘relatively inert’ mercury (Hg) as pressure medium. Morphological observation of a PEO_m-b-PMA(Az)_n thin film submitted to SCCO₂ was performed by atomic force microscopy (AFM) to investigate the nano-structure organization. These results indicate the possibility of modifying the nano-structure in a specific way depending on the CO₂ physical state.     

A comparative study of the stimuli‐responsive properties of DMAEA and DMAEMA containing polymers

Reversible addition‐fragmentation chain transfer copolymerization of dimethylaminoethyl acrylate (DMAEA) and methyl acrylate (MA) and their methacrylate counterparts (MMA) has been performed with good control over molecular weight and polydispersity. A screening in composition of copolymers has been performed from 0 to 75% of MA (or MMA). The behavior of these pH and temperature‐sensitive copolymers has been studied in aqueous solution by measuring the cloud point (CP) and the acid dissociation constants (pK_a). The higher incorporation of the hydrophobic monomer in the copolymer resulted in an increase in the pK_a values due to the larger distance between charges thus facilitating the protonation of adjacent nitrogens for both, the acrylate and methacrylate derivatives. The CP behavior of the copolymers has been studied in pure water and the CP values have been found to be irreproducible for the acrylate polymers, as a consequence of the self‐hydrolysis of DMAEA. Hence, kinetic studies have been performed to quantify the degree of self‐hydrolysis at different temperatures and polymer concentrations to explore the full potential and application of these versatile polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3333–3338     

Halochrome Molekeln 2. Mitteilung [1] Synthese und acidobasisches Verhalten substituierter 6,6-Diphenyl-6H-chromeno [4,3-b]indole

Halochromic Molecules, Synthesis and Acidobasic Behaviour of Substituted 6,6-Diphenyl-6H-chromeno [4,3-b]indoles Substituted 6,6-diphenyl-6H-chromeno [4,3-b]indoles are forming with acid ring-opened, intensely coloured diphenyl-indol-3-yl-carbenium salts. The preparation of these products is described and the UV./VIS.-spectra are discussed. An investigation of the halochromic properties is made by spectrophotometric determination of ?_pH*- and ?_H0*-curves in buffered methanol/water solutions. pK*- and pK*-values respectively are calculated and the suitability of substituted 6 H- chromeno [4, 3-b]indoles as chromogens in self-duplicating stationery is discussed.     

Reactions of 2-methoxy- and 2-substituted 4,6-diamino-s-triazines with formaldehyde: Kinetics and adaptability of the rate constants to hammett and taft equations

The reactions of 2-methoxy-4,6-diamino-s-triazine (MT) with formaldehyde (F) were studied in the pH region 2–11. In an alkaline medium the rate constants were proportional to the concentration of hydroxyl ion in the pH range 9.90–10.95; in a neutral medium they were approximately constant and in an acidic medium they achieved the maximum value at pH 3.50 (half-neutralization point of MT). The hydroxymethylation mechanism of MT was similar to that of melamine. The hydroxymethylation rate constants of various 2-substituted 4,6-diamino-s-triazines(XT) were determined at pH 7.00, 10.26, and 4.00. Linear relationship was observed between the rate constants at pH 7.00 and pK_b of XT, σ_m, and σ^* but not at pH 10.26 and 4.00.     

Tuning the sugar‐response of boronic acid block copolymers

A detailed study of the pH‐ and sugar‐responsive behavior of poly(3‐acrylamidophenylboronic acid pinacol ester)‐b‐poly(N,N‐dimethylacrylamide) (PAPBAE‐b‐PDMA) block copolymers is presented. Reversible addition‐fragmentation chain transfer (RAFT) polymerization of the pinacol ester of 3‐acrylamidophenylboronic acid resulted in homopolymers with molecular weights between 12,000 and 37,000 g/mol. The resulting homopolymers were employed as macro‐chain transfer agents during the polymerization of N,N‐dimethylacrylamide (DMA). Successful chain extension and removal of the pinacol protecting groups to yield poly(3‐acrylamidophenylboronic acid)‐b‐PDMA (PAPBA‐b‐PDMA) with free boronic acid moieties resulted in pH‐ and sugar‐responsive block copolymers that were subsequently investigated for their behavior in aqueous solution. The PAPBA‐b‐PDMA block copolymers were capable of solution self‐assembly due to the PAPBA block being water‐insoluble below its pK_a. The resulting aggregates were demonstrated to solubilize and release model hydrophobic compounds, as demonstrated by fluorescence studies. Dissociation of the aggregates was induced by raising the pH above the pK_a of the boronic acid residues or by adding sugars capable of forming boronate esters. Aggregate size, dissociation kinetics, and the effect of various sugars were considered. The critical sugar concentration needed to induce aggregate dissociation was tuned by incorporation of hydrophilic DMA units within the PAPBA responsive segment to yield PDMA‐b‐poly(3‐acrylamidophenylboronic acid‐co‐DMA) block copolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cleavage of NpzCH2 -OP and unexpected formation of bis(3,5-dimethyl-1H-pyrazol-1-yl)methane (dmbpm): X-ray crystal structure of [PdCl2(dmbpm)]

In the reaction of (3,5-dimethyl-1H-pyrazol-1-yl)methyldiphenylphosphinite (dmpmp) with [PdCl₂(CH₃CN)₂], we have obtained hydrolysis and phosphorus oxidation products and the unexpected complex cis-[PdCl₂(dmbpm)] (dmbpm = bis(3,5-dimethyl-1H-pyrazol-1-yl)methane). Modifications in the synthesis of dmpmp (high temperature, strong base, and the presence of Ph₂P(O)Cl) show that dmbpm is a by-product from the synthetic route to dmpmp. The complex cis-[PdCl₂(dmbpm)] is isolated and fully characterized by mass spectrometry, analytical, and spectroscopy techniques and the crystal structure is obtained by X-ray diffraction methods.     

Determination of acidity constants,ionic mobilities,and hydrodynamic radii of carborane-based inhibitors of carbonic anhydrases by capillary electrophoresis

Capillary electrophoresis (CE) has been applied for determination of the thermodynamic acidity constants (pK_a) of the sulfamidoalkyl and sulfonamidoalkyl groups, the actual and limiting ionic mobilities and hydrodynamic radii of important compounds, eight carborane-based inhibitors of carbonic anhydrases, which are potential new anticancer drugs. Two types of carboranes were investigated, (i) icosahedral cobalt bis(dicarbollide)(1-) ion with sulfamidoalkyl moieties, and (ii) 7,8-nido-dicarbaundecaborate with sulfonamidoalkyl side chains. First, the mixed acidity constants, pK_a^mix, of the sulfamidoalkyl and sulfonamidoalkyl groups of the above carboranes and their actual ionic mobilities were determined by nonlinear regression analysis of the pH dependences of their effective electrophoretic mobility measured by capillary electrophoresis in the pH range 8.00−12.25, at constant ionic strength (25 mM), and constant temperature (25°C). Second, the pK_a^mix were recalculated to the thermodynamic pK_as using the Debye–Hückel theory. The sulfamidoalkyl and sulfonamidoalkyl groups were found to be very weakly acidic with the pK_as in the range 10.78−11.45 depending on the type of carborane cluster and on the position and length of the alkyl chain on the carborane scaffold. These pK_as were in a good agreement with the pK_as (10.67−11.27) obtained by new program AnglerFish (freeware at https://echmet.natur.cuni.cz ), which provides thermodynamic pK_as and limiting ionic mobilities directly from the raw CE data. The absolute values of the limiting ionic mobilities of univalent and divalent carborane anions were in the range 18.3−27.8 TU (Tiselius unit, 1 × 10⁻⁹ m²/Vs), and 36.4−45.9 TU, respectively. The Stokes hydrodynamic radii of univalent and divalent carborane anions varied in the range 0.34−0.52 and 0.42−0.52 nm, respectively.     

Halochrome Molekeln. 6. Mitteilung. Spektrophotometrische Untersuchungen zum acidobasischen Verhalten substituierter 6,6-Diphenyl-6H-chromeno[4,3-b]indolizine und ihrer Aza-analogen

Halochromic Molecules. Spectrophotometric Investigation of the Acidobasic Behaviour of Substituted 6,6-Diphenyl-6H-chromeno[4, 3-b]indolizines and their Aza-analogues Substituted 6,6-diphenyl-6H-chromeno[4,3-b]indolizines form ring-opened, intensely coloured (diphenyl)-indolizinylcarbenium salts with acid. UV/VIS spectra of the coloured salts are discussed on the basis of VEPPPCI calculations. The ?_pH* curves in buffered MeOH/H₂O solutions and the pK* values are determined. The title compounds undergo very complex protonation equilibria.     

RAFT synthesis of amphiphilic (A‐ran‐B)‐b‐C diblock copolymers with tunable pH‐sensitivity

RAFT homopolymerization of 2‐(diisopropylamino)ethyl methacrylate (DPA) and 2‐(diethylamino)ethyl methacrylate (DEA) and their random copolymerization were investigated. The random copolymers of DPA‐ran‐DEA were synthesized and used as macro‐CTA to prepare poly(DPA‐ran‐DEA)‐b‐poly(N‐(2‐hydroxypropyl) methacrylamide) amphiphilic block copolymers. The ¹H NMR and GPC measurements confirmed the successful synthesis of these copolymers. The potentiometric titration results showed that the pK_b values of these copolymers were in the range of 6.7 ～ 7.7 and linearly varied with the DPA/DEA composition, regardless of the block length of HPMA. The pH‐induced micellization in PBS solution was verified by fluorescence spectroscopy. The dynamic light scattering evaluation showed that the hydrodynamic diameters of these micelles are between 37 ～ 43 nm © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3740–3748, 2008