5,5′‐Bis(hydroxymethyl)‐3,3′‐dimethoxybiphenyl‐2,2′‐diol with a new three‐dimensional 3‐modal topology of synthons

The title lignin model compound, C₁₆H₁₈O₆, resides on a twofold axis parallel with the b axis, with the mid‐point of the internal C—C(−x + 1, y, −z + ) bond located on the twofold axis. The exo angles between the methoxy groups and the benzene rings deviate significantly from the expected value of 120° [125.15 (7) and 114.27 (6)°]. A 12‐coordinated 3‐modal three‐dimensional net with a new topology was identified on the synthon level. A comparison of the flexibility of related o,o′‐disubstituted biphenyl derivatives and biphenyl is presented, with the angles between the ring planes in substituted biphenyls found to be in the range 40–70°.     

(2S,RS)‐6‐Phenyl‐1‐(p‐tolyl­sulfinyl)­hexa‐3(E),5(E)‐dien‐2‐ol

The mol­ecule of the title compound, C₁₉H₂₀O₂S, corresponds to a chiral sulfinyldienol with two stereogenic centres, viz. the C atom susbtituted by the hydr­oxy group and the sulfinyl S atom. The mol­ecule displays a V‐shape in the solid state. The dihedral angle defined by the least‐squares planes of the aromatic rings is 72.9 (1)°. The packing pattern exhibits the following inter­molecular hydrogen bonds: one O—H⋯O [H⋯O = 1.98 Å, O⋯O = 2.785 (4) Å and O—H⋯O = 166°] and two C—H⋯O [H⋯O = 2.58 and 2.60 Å, C⋯O = 3.527 (5) and 3.347 (5) Å, and C—H⋯O = 164 and 134°]. These define a chain along b.     

(E)‐3‐(Benzo[b]thiophen‐2‐yl)‐2‐(3,4,5‐trimethoxyphenyl)acrylonitrile and (Z)‐3‐(benzo[b]thiophen‐2‐yl)‐2‐(3,4‐dimethoxyphenyl)acrylonitrile

The title compounds, C₂₀H₁₇NO₃S, (I), and C₁₉H₁₅NO₂S, (II), were prepared by the reaction of benzo[b]thiophene‐2‐carbaldehyde with (3,4,5‐trimethoxyphenyl)acetonitrile and (3,4‐dimethoxyphenyl)acetonitrile, respectively, in the presence of methanolic potassium hydroxide. In (I), the C=C bond linking the benzo[b]thiophene and the 3,4,5‐trimethoxyphenyl units has E geometry, with dihedral angles between the plane of the bridging unit and the planes of the two adjacent ring systems of 5.2 (3) and 13.1 (2)°, respectively. However, in (II), the C=C bond has Z geometry, with dihedral angles between the plane of the bridging unit and the planes of the adjacent benzo[b]thiophene and 3,4‐dimethoxyphenyl units of 4.84 (17) and 76.09 (7)°, respectively. There are no significant intermolecular hydrogen‐bonding interactions in the packing of (I) and (II). The packing is essentially stabilized via van der Waals forces.     

Synthesis and anti‐inflammatory activity of 8H‐1‐thia‐8‐aza‐dibenzo[e,h]azulenes

Synthesis of a novel class of fused heterotetracyclic compounds, 8H‐1‐thia‐8‐aza‐dibenzo[e,h]azulenes ( VII ), is described. Starting N‐benzoyl‐protected 5H‐dibenzo[b,f]azepine ( XI , PG = Bz) was oxidized to 5‐benzoyl‐10,11‐epoxy‐10,11‐dihydro‐5H‐dibenzo[b,f]azepine ( 2 ), which subsequently rearranged in Lewis acid‐induced epoxide ring opening to give 5‐benzoyl‐5,11‐dihydro‐10H‐dibenzo[b,f]azepin‐10‐one ( 3 ). Vilsmeier reaction of 3 provided β‐chlorovinyl aldehyde 4 that readily cyclized with ethyl 2‐mercaptoacetate to form dibenzazepino[4,5]‐fused thiophene structure 5 . Further transformation of substituent at C‐2 position of 5 and N‐deprotection led to final aminoalkoxy derivatives 9 . All compounds with tetracyclic skeleton were tested in vitro for their anti‐inflammatory activity. J. Heterocyclic Chem., (2011).     

S‐(4‐Nitrophenyl) 4‐nitrobenzenethiosulfonate

The title compound, C₁₂H₈N₂O₆S₂, (I), is a positional isomer of S‐(2‐nitrophenyl) 2‐nitrobenzenethiosulfonate [Glidewell, Low & Wardell (2000). Acta Cryst. B 56 , 893–905], (II). The most obvious difference between the two isomers is the rotation of the nitro groups with respect to the planes of the adjacent aryl rings. In (I), the nitro groups are only slightly rotated out of the plane of the adjacent aryl ring [2.4 (6) and 6.7 (7)°], while in (II) the nitro groups are rotated by between 37 and 52°, in every case associated with S—S—C—C torsion angles close to 90°. Other important differences between the isomers are the C—S—S(O₂)—C torsion angle [78.39 (2)° for (I) and 69.8 (3)° for (II) (mean)] and the dihedral angles between the aromatic rings [12.3 (3)° for (I) and 28.6 (3)° for (II) (mean)]. There are two types of C—H...O hydrogen bond in the structure [C...O = 3.262 (7) Å and C—H...O = 144°; C...O = 3.447 (7) Å and C—H...O = 166°] and these link the molecules into a two‐dimensional framework. The hydrogen‐bond‐acceptor properties differ between the two isomers.     

1‐(2‐{4‐[6‐Hydro­xy‐2‐(4‐hydroxy­phenyl)­benzo­[b]­thiol‐3‐yl­carbonyl]­phenoxy}ethyl)­piperidinium chloride

The title compound, raloxifene hydro­chloride, C₂₈H₂₈NO₄S⁺·Cl^?, belongs to the benzo­thio­phene class of antiosteoporotic drugs. In the molecular cation, the 2‐phenol ring sustains a dihedral angle of 45.3 (1)° relative to the benzo­[b]­thio­phene system. The benzo­[b]­thio­phene and phenyl ring planes are twisted with respect to the carbonyl plane, with the smallest twist component occurring between the phenyl and carbonyl planes. The N atom bears the positive charge in the molecular cation and the piperidine ring adopts an almost perfect chair conformation. The Cl^? anion is involved in the formation of N—H?Cl and O—H?Cl intermolecular hydrogen bonds, which lead to the formation of a layer of molecular cations.     

1,7‐Dideaza‐2′‐deoxy‐6‐nitronebularine: a pyrrolo[2,3‐b]pyridine nucleoside with an intramolecular hydrogen bond stabilizing the syn conformation

The title compound [systematic name: 1‐(2‐deoxy‐β‐D‐erythro‐pentofuranosyl)‐4‐nitro‐1H‐pyrrolo[2,3‐b]pyridine], C₁₂H₁₃N₃O₅, forms an intramolecular hydrogen bond between the pyridine N atom as acceptor and the 5′‐hydroxy group of the sugar residue as donor. Consequently, the N‐glycosylic bond exhibits a syn conformation, with a χ torsion angle of 61.6 (2)°, and the pentofuranosyl residue adopts a C2′‐endo envelope conformation (²E, S‐type), with P = 162.1 (1)° and τ_m = 36.2 (1)°. The orientation of the exocyclic C4′—C5′ bond is +sc (gauche, gauche), with a torsion angle γ = 49.1 (2)°. The title nucleoside forms an ordered and stacked three‐dimensional network. The pyrrole ring of one layer faces the pyridine ring of an adjacent layer. Additionally, intermolecular O—H...O and C—H...O hydrogen bonds stabilize the crystal structure.     

4‐(4‐Fluoro‐3‐phenoxy­phen­yl)‐6‐(4‐fluoro­phen­yl)‐2‐oxo‐1,2‐dihydro­pyridine‐3‐carbonitrile and the 6‐(4‐methyl­phen­yl)‐ analogue

The crystal structures of the title compounds, viz. C₂₄H₁₄F₂N₂O₂, (I), and C₂₅H₁₇FN₂O₂, (II), respectively, have been determined in order to unravel the role of an ordered F atom in generating stable supra­molecular assemblies. On changing the substitution from fluorine to a methyl group, C—H⋯F inter­actions are replaced by C—H⋯π inter­actions, revealing the importance of such weak inter­actions when present alongside N—H⋯O and C—H⋯O hydrogen bonds. The dihedral angle between the planes of the 4‐fluoro­phenyl ring and the pyridine ring is 26.8 (1)° in (I), while that between the planes of the 4‐methyl­phenyl and pyridine rings is 29.5 (1)° in (II).     

4‐[2‐(3‐Methoxyphenyl)ethenyl]‐N‐methylpyridinium tetraphenylborate

In the title compound, C₁₅H₁₆NO⁺·C₂₄H₂₀B⁻, the pyridinium ring of the cation makes a dihedral angle of 4.3 (2)° with the benzene ring. Each is rotated in the same direction with respect to the central C—CH=CH—C linkage, by 10.0 (2) and 7.8 (2)°, respectively. The anions have a slightly distorted tetrahedral geometry. The most interesting feature of the structure is that the anions form a honeycomb‐like hexagonal structure down the b axis through C—H...π interactions. The hexagon is constructed from six BPh₄⁻ anions. The cations interact in a head‐to‐tail fashion along [010], forming chains, and pack antiparallel inside the above honeycomb‐like structure through C—H...π interactions.     

(Benzo­furan‐2‐yl)(3‐methyl‐3‐phenyl­cyclo­butyl)­methanone

The structure of the title compound, C₂₀H₁₈O₂, consists of a dimeric arrangement of benzo­furan mol­ecules around an inversion centre, linked via C—H⋯O hydrogen bonds. There are also C—H⋯π ring interactions. All these interactions result in the formation of infinite chains parallel to the [100] axis. The cyclo­butane ring is puckered, with a dihedral angle of 29.03 (13)° between the two three‐atom planes.     

A low‐temperature modification of hexa‐tert‐butyldisilane and a new polymorph of 1,1,2,2‐tetra‐tert‐butyl‐1,2‐diphenyldisilane

Crystals of hexa‐tert‐butyldisilane, C₂₄H₅₄Si₂, undergo a reversible phase transition at 179 (2) K. The space group changes from Ibca (high temperature) to Pbca (low temperature), but the lattice constants a, b and c do not change significantly during the phase transition. The crystallographic twofold axis of the molecule in the high‐temperature phase is replaced by a noncrystallographic twofold axis in the low‐temperature phase. The angle between the two axes is 2.36 (4)°. The centre of the molecule undergoes a translation of 0.123 (1) Å during the phase transition, but the conformation angles of the molecule remain unchanged. Between the two tri‐tert‐butylsilyl subunits there are six short repulsive intramolecular C—H...H—C contacts, with H...H distances between 2.02 and 2.04 Å, resulting in a significant lengthening of the Si—Si and Si—C bonds. The Si—Si bond length is 2.6863 (5) Å and the Si—C bond lengths are between 1.9860 (14) and 1.9933 (14) Å. Torsion angles about the Si—Si and Si—C bonds deviate by approximately 15° from the values expected for staggered conformations due to intramolecular steric H...H repulsions. A new polymorph is reported for the crystal structure of 1,1,2,2‐tetra‐tert‐butyl‐1,2‐diphenyldisilane, C₂₈H₄₆Si₂. It has two independent molecules with rather similar conformations. The Si—Si bond lengths are 2.4869 (8) and 2.4944 (8) Å. The C—Si—Si—C torsion angles deviate by between −3.4 (1) and −18.5 (1)° from the values expected for a staggered conformation. These deviations result from steric interactions. Four Si—C(t‐Bu) bonds are almost staggered, while the other four Si—C(t‐Bu) bonds are intermediate between a staggered and an eclipsed conformation. The latter Si—C(t‐Bu) bonds are about 0.019 (2) Å longer than the staggered Si—C(t‐Bu) bonds.     

2,6‐Di­benzyl‐1,2,3,5,6,7‐hexa­hydro‐2,4,6,8‐tetra­aza‐s‐indacene and 2,6‐bis(4‐methoxy­benzyl)‐1,2,3,5,6,7‐hexa­hydro‐2,4,6,8‐tetra­aza‐s‐indacene

The title compounds, C₂₂H₂₂N₄ and C₂₄H₂₆N₄O₂ [alternative names: 2,6‐dibenzyl‐2,3,6,7‐tetrahydro‐1H,5H‐dipyrrolo[3,4‐b; 3′,4′‐e]pyrazine and 2,6‐bis(4‐methoxybenzyl)‐2,3,6,7‐tetrahydro‐1H,5H‐dipyrolo[3,4‐b;3′,4′‐e]pyrazine], two 1,2,3,5,6,7‐hexa­hydro‐2,4,6,8‐tetra­aza‐s‐indacene derivatives, are both centrosymmetric and have similar S‐shaped structures. In the former, there are two independent mol­ecules (A and B), both of which possess C_i symmetry. These two mol­ecules are arranged such that the benzene ring substituent of mol­ecule B is directed towards the plane of the benzene ring substituent of mol­ecule A, with a dihedral angle of 55.4 (2)° between their planes. The shortest C—H⋯C distance is, however, only 3.21 (1) Å. In both compounds, the benzene ring substituents are almost perpendicular to the plane of the central pyrazine ring, and the pyrrolidine rings have perfect envelope conformations. In the crystal structures of both compounds, the mol­ecules pack in a herring‐bone arrangement.     

N,N′‐Bis(2‐hydroxybenzylidene)pentane‐1,5‐diamine

In the title potential O,N,N′,O′‐tetradentate Schiff base ligand {systematic name: 2,2′‐[pentane‐1,5‐diylbis(nitrilomethylidyne)]diphenol}, C₁₉H₂₂N₂O₂, the mutual orientation of the three planar fragments determines the conformation of the molecule. The dihedral angles between the planes of the two salicylidene groups and the plane of the central extended pentane chain are 78.4 (2) and 62.0 (3)°, and the angle between the terminal ring planes is 55.4 (1)°. Strong intramolecular O—H...N hydrogen bonds close almost‐planar six‐membered rings, and the O—H bonds are elongated as a result of hydrogen‐bond formation.     

Ethyl β‐{2‐[4‐(dimethylamino)phenyliminomethyl]‐1‐(phenylsulfonyl)indol‐3‐yl}acrylate

The title compound, C₂₈H₂₇N₃O₄S, crystallizes in the centrosymmetric space group P2₁/n, with one mol­ecule in the asymmetric unit. In the indole ring, the dihedral angle between the fused rings is 3.6 (1)°. The phenyl ring of the sulfonyl substituent makes a dihedral angle of 79.2 (1)° with the best plane of the indole moiety. The phenyl ring of the di­methyl­amino­phenyl group is orthogonal to the phenyl ring of the phenyl­sulfonyl group. The dihedral angle formed by the weighted least‐squares planes through the pyrrole ring and the phenyl ring of the di­methyl­amino­phenyl group is 7.8 (1)°. The molecular structure is stabilized by C—H?O and C—H?N interactions.     

5‐Ethyl‐2′‐deoxy‐4′‐thiouridine (R)‐S‐oxide monohydrate

The pyrimidine ring of the title compound, C₁₁H₁₆N₂O₅S·H₂O, is planar to within 0.026 (1) Å and makes an angle of 77.73 (8)° with the mean plane of the thiosugar ring. In terms of standard nucleoside nomenclature, this ring has a C1′‐exo,C2′‐endo conformation. The O5′—C5′—C4′—C3′ torsion angle is ?167.4 (2)° and the glycosidic S4′—C1′—N1—C2 torsion angle is ?101.8 (2)° (anti).     

2,2′‐Anhydro‐1‐(3′,5′‐di‐O‐acetyl‐β‐D‐arabinofuranosyl)uracil,a cyclouridine nucleoside with a C4′‐endo furanosyl conformation

2,2′‐Anhydro‐1‐(3′,5′‐di‐O‐acetyl‐β‐D‐arabinofuranosyl)uracil, C₁₃H₁₄N₂O₇, was obtained by refluxing 2′,3′‐O‐(methoxymethylene)uridine in acetic anhydride. The structure exhibits a nearly perfect C4′‐endo (⁴E) conformation. The best four‐atom plane of the five‐membered furanose ring is O—C—C—C, involving the C atoms of the fused five‐membered oxazolidine ring, and the torsion angle is only −0.4 (2)°. The oxazolidine ring is essentially coplanar with the six‐membered uracil ring [r.m.s. deviation = 0.012 (5) Å and dihedral angle = −3.2 (3)°]. The conformation at the exocyclic C—C bond is gauche–trans which is stabilized by various C—H...π and C—O...π interactions.     

(+)‐3,11‐Dioxoandrost‐4‐ene‐17β‐carboxyl­ic acid: catemeric hydrogen bonding in a steroidal keto acid

The title keto acid, C₂₀H₂₆O₄, forms carboxyl‐to‐ketone hydrogen‐bonding catemers [O?O = 2.653 (5) Å and O—H?O = 172 (5)°], linking translationally related mol­ecules via the A‐ring ketone. The two mol­ecules in the cell form two parallel counter‐directional chains, screw‐related in b. A total of four intermolecular C—H?O=C close contacts was found, involving both ketone functions.     

1‐Methyl‐4‐nitraminopyridinium nitrate and 4‐nitraminopyridinium methanesulfonate

In the title compounds, C₆H₈N₃O₂⁺·NO₃^? and C₅­H₆­N₃­O₂⁺·­CH₃SO₃^?, respectively, the cations are almost planar; the twist of the nitr­amino group about the C—N and N—N bonds does not exceed 10°. The deviations from coplanarity are accounted for by intermolecular N—H?O interactions. The coplanarity of the NHNO₂ group and the phenyl ring leads to the deformation of the nitr­amino group. The C—N—N angle and one C—C—N angle at the junction of the phenyl ring and the nitr­amino group are increased from 120° by ca 6°, whereas the other junction C—C—N angle is decreased by ca 5°. Within the nitro group, the O—N—O angle is increased by ca 5° and one O—N—N angle is decreased by ca 5°, whereas the other O—N—N angle remains almost unchanged. The cations are connected to the anions by relatively strong N—H?O hydrogen bonds [shortest H?O separations 1.77 (2)–1.81 (3) Å] and much weaker C—H?O hydrogen bonds [H?O separations 2.30 (2)–2.63 (3) Å].     

(E)‐2‐[2‐(1‐Naphthyl)­vinyl]‐3‐tosyl‐2,3‐di­hydro‐1,3‐benzo­thia­zole

The title compound, C₂₆H₂₁NO₂S₂, which consists of a benzo­thia­zole skeleton with α‐naphthyl­vinyl and tosyl groups at positions 2 and 3, respectively, was prepared by palladium–copper‐catalyzed heteroannulation. The E configuration of the mol­ecule about the vinyl C=C bond is established by the benzothiazole–naphthyl C—C—C—C torsion angle of 177.5 (4)°. The five‐membered heterocyclic ring adopts an envelope conformation with the Csp³ atom 0.380 (6) Å from the C₂NS plane. The two S—C [1.751 (4) and 1.838 (4) Å] and two N—C [1.426 (5) and 1.482 (5) Å] bond lengths in the thia­zole ring differ significantly.     

N,N‐Di­methyl­anilinium 3‐cyano‐4‐(di­cyano­methyl­ene)‐5‐oxo‐4,5‐di­hydro‐1H‐pyrrol‐2‐olate

In the title compound, C₈H₁₂N⁺·C₈HN₄O₂⁻, the anion and cation lie on a crystallographic mirror plane and form planar ribbons via N—H⋯O [N⋯O = 2.933 (4) Å, H⋯O = 2.01 Å and N—H⋯O = 170°] and N—H⋯N [N⋯N = 3.016 (5) Å, H⋯N = 2.15 Å and N—H⋯N = 169°] hydrogen bonds. The ribbons are further linked via weak C—H⋯O and C—H⋯N hydrogen bonds. In adjacent planes, anions lie opposite cations; π–π interactions (separation a/2 = 3.520 Å) exist between the anions and the cations, and stacks are formed, running along the a axis. The cations are disordered over two interpenetrating sites, with occupancies of 0.833 (5) and 0.167 (5).