CuO nanoparticles supported on three‐dimensional nitrogen‐doped graphene as a promising catalyst for thermal decomposition of ammonium perchlorate

In the present work, CuO nanoparticles grown on three‐dimensional nitrogen‐doped graphene‐based frameworks (CuO@3D‐(N)GFs) were synthesized using a two‐step method. After the synthesis of three‐dimensional nitrogen‐doped graphene, CuO nanoparticles were deposited on it, by adding cupric acetate followed by thermal treatment. Different analysis methods were used to characterize the products. The as‐prepared nanocomposite was used as a promising catalyst for thermal decomposition of ammonium perchlorate (AP) as one of the most common oxidizer in composite propellants. Differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA) techniques were used to investigate the thermal decomposition of ammonium perchlorate. According to the DSC/TGA, high temperature decomposition of AP decreased to 111 °C in the presence of 4% CuO@3D‐(N)GFs and the total heat release (ΔH) from decomposition of AP increased to 1893 J g^?1 which is much more than 590 J g^?1 for pure AP.     

N‐Propionylhydroxylamine forms a three‐dimensional hydrogen‐bonded framework structure

The title compound, N‐hydroxy­propan­amide, C₃H₇NO₂, crystallizes with Z′ = 3 in P2₁/c. The mol­ecules are linked by three N—H?O hydrogen bonds [N?O 2.8012 (16) to 2.8958 (15) Å; N—H?O 163 to 168°] and by three O—H?O hydrogen bonds [O?O 2.6589 (15) to 2.6775 (17) Å; O—H?O 165 to 177°] into a single three‐dimensional framework.     

A three‐dimensional pyrazine‐2,5‐dicarboxylate CdII coordination framework with new (4,4,4)‐connected three‐nodal topology

Poly[(μ₄‐pyrazine‐2,5‐dicarboxylato)cadmium(II)], [Cd(C₆H₂N₂O₄)]_n or [Cd(pzdc)]_n (pzdc is the pyrazine‐2,5‐dicarboxylate dianion), has been synthesized hydrothermally. The asymmetric unit consists of a Cd^II atom and two independent halves of pzdc ligands that can be expanded via inversion through the centres of the ligands so that each ligand binds to four Cd^II atoms with the same binding mode using six donor atoms. The Cd^II centre is in a distorted octahedral coordination geometry with four O‐ and two N‐atom donors from four pzdc ligands. The infinite linkage of the metal atoms and ligands forms a three‐dimensional framework with a rectangular channel which is so narrow that there is no measurable void space in the overall structure. This coordination polymer represents the first example of (4,4,4)‐connected three‐nodal framework.     

Hexamethylenediammonium bis(chloroacetate): a three‐dimensional hydrogen‐bonded framework structure

In the title compound, C₆H₁₈N₂²⁺·2C₂H₂ClO₂⁻, the cation lies across an inversion centre in the P space group. The ions are linked by two two‐centre N—H...O hydrogen bonds and by one three‐centre N—H...(O)₂ hydrogen bond to form a three‐dimensional framework structure. The significance of this study lies in the analysis of the complex hydrogen‐bonded structure and in the comparison of this structure with those of other simple hexamethylenediammonium salts.     

A tetrahedrally coordinated cobalt(II) phosphonate with a three‐dimensional framework containing two‐dimensional channels

The structure of poly[caesium(I) [(μ₄‐ethylenediphosphonato)cobalt(II)]], {Cs[Co(C₂H₅O₆P₂)]}_n, reveals a three‐dimensional polymeric open framework consisting of tetrahedral Co^II atoms coordinated by four different ethylenediphosphonate O atoms and intermolecular O—H...O hydrogen bonds. The largest open window is made of corner‐sharing CoO₄ and PO₃C tetrahedra, giving 16‐membered rings of dimensions 9.677 (5) × 4.684 (4) Ų. There are two independent ethylenediphosphonate ligands, each lying about an inversion centre.     

Evaluation of dissociation constants of ammonium ion in aqueous lithium perchlorate and lithium chloride-sodium chloride mixed solutions

The Pitzer approach has been applied to the evaluation of dissociation constants of ammonium ion in lithium perchlorate and lithium chloride-sodium chloride mixed solutions at 25°C. The calculated values showed good agreement with the observed values, provided all the higher-order interaction terms ('s and 's) concerned were introduced. The unknown (NH₄LiClO₄) value was determined from the isopiestic measurements of NH₄ClO₄–LiClO₄ mixed solutions. Parameters in the Pitzer formalism for ammonia-ion interactions involved in LiCl and NaCl media were determined by use of the activity coefficients of ammonia measured in LiCl–NaCl mixed solutions by a transpiration method.     

A three‐dimensional AlIII/NaI metal–organic framework resulting from dimethylformamide hydrolysis

The three‐dimensional metal–organic framework poly[bis(dimethylammonium) [hexa‐μ₂‐formato‐κ¹²O:O′‐aluminium(III)sodium(I)]], {(C₆H₈N)₂[AlNa(HCOO)₆]}_n, was obtained serendipitously and has been characterized by X‐ray diffraction. The product has arisen as a result of a hydrolysis reaction of dimethylformamide (DMF) and contains dimethylammonium (DMA) cations included in structural voids formed by a three‐dimensional [AlNa(HCOO)₆]⁻ network. This study provides evidence that, in the presence of traces of aluminium, DMF stored in a glass bottle can be hydrolysed to formate and dimethylamine with simultaneous extraction of Na⁺ cations from the glass. It also demonstrates that care must be taken regarding the metal and water content when DMF is not freshly distilled, since the hydrolysis of amide can occur.     

The first three‐dimensional vanadium hypophosphite

The title synthesized hypophosphite has the formula V(H₂PO₂)₃. Its structure is based on VO₆ octahedra and (H₂PO₂)⁻ pseudo‐tetrahedra. The asymmetric unit contains two crystallographically distinct V atoms and six independent (H₂PO₂)⁻ groups. The connection of the polyhedra generates [VPO₆H₂]⁶⁻ chains extended along a, b and c, leading to the first three‐dimensional network of an anhydrous transition metal hypophosphite.     

The three‐dimensional hydrogen‐bonded structures in the ammonium and sodium salt hydrates of 4‐aminophenylarsonic acid

The structures of two hydrated salts of 4‐aminophenylarsonic acid (p‐arsanilic acid), namely ammonium 4‐aminophenylarsonate monohydrate, NH₄⁺·C₆H₇AsNO₃⁻·H₂O, (I), and the one‐dimensional coordination polymer catena‐poly[[(4‐aminophenylarsonato‐κO)diaquasodium]‐μ‐aqua], [Na(C₆H₇AsNO₃)(H₂O)₃]_n, (II), have been determined. In the structure of the ammonium salt, (I), the ammonium cations, arsonate anions and water molecules interact through inter‐species N—H...O and arsonate and water O—H...O hydrogen bonds, giving the common two‐dimensional layers lying parallel to (010). These layers are extended into three dimensions through bridging hydrogen‐bonding interactions involving the para‐amine group acting both as a donor and an acceptor. In the structure of the sodium salt, (II), the Na⁺ cation is coordinated by five O‐atom donors, one from a single monodentate arsonate ligand, two from monodentate water molecules and two from bridging water molecules, giving a very distorted square‐pyramidal coordination environment. The water bridges generate one‐dimensional chains extending along c and extensive interchain O—H...O and N—H...O hydrogen‐bonding interactions link these chains, giving an overall three‐dimensional structure. The two structures reported here are the first reported examples of salts of p‐arsanilic acid.     

Structure and photophysical and electrochemical properties of a copper porphyrin complex with a three‐dimensional framework

Porphyrins and metalloporphyrins can generally show attractive structural motifs and interesting properties. A new copper porphyrin, namely poly[[μ‐chlorido‐[μ₅‐5,10,15,20‐tetrakis(pyridin‐4‐yl)‐21H,23H‐porphine]tricopper(I)] [aquadichloridocopper(II)]], {[Cu₃(C₄₀H₂₄N₈)Cl][CuCl₂(H₂O)]}_n ( 1 ), was synthesized by the self‐assembly of copper chloride with 5,10,15,20‐tetrakis(pyridin‐4‐yl)‐21H,23H‐porphine under solvothermal conditions. The structure of this copper porphyrin was characterized by single‐crystal X‐ray crystallography and elemental analysis. The porphyrin macrocycle shows a distorted saddle geometry, with the four pyrrole rings slightly distorted in an alternating mode either upwards or downwards. The copper ions show three‐coordinated triangular and four‐coordinated square‐planar geometries. Every copper–porphyrin unit connects to 12 others via four μ₄‐bridging Cu₂Cl moieties to complete the three‐dimensional framework of compound 1 , with isolated CuCl₂(H₂O) units located in the voids. This copper porphyrin displays a red photoluminescence. Electrochemical measurements showed that compound 1 has two redox waves (E_1/2 = ?160 and 91 mV).     

A two‐dimensional layered CdII coordination polymer with a three‐dimensional supramolecular architecture incorporating mixed multidentate N‐ and O‐donor ligands

The combination of N‐heterocyclic and multicarboxylate ligands is a good choice for the construction of metal–organic frameworks. In the title coordination polymer, poly[bis{μ₂‐1‐[(1H‐benzimidazol‐2‐yl)methyl]‐1H‐tetrazole‐κ²N³:N⁴}(μ₄‐butanedioato‐κ⁴O¹:O^1′:O⁴:O^4′)(μ₂‐butanedioato‐κ²O¹:O⁴)dicadmium], [Cd(C₄H₄O₄)(C₉H₈N₆)]_n, each Cd^II ion exhibits an irregular octahedral CdO₄N₂ coordination geometry and is coordinated by four O atoms from three carboxylate groups of three succinate (butanedioate) ligands and two N atoms from two 1‐[(1H‐benzimidazol‐2‐yl)methyl]‐1H‐tetrazole (bimt) ligands. Cd^II ions are connected by two kinds of crystallographically independent succinate ligands to generate a two‐dimensional layered structure with bimt ligands located on each side of the layer. Adjacent layers are further connected by hydrogen bonding, leading to a three‐dimensional supramolecular architecture in the solid state. Thermogravimetric analysis of the title polymer shows that it is stable up to 529 K and then loses weight from 529 to 918 K, corresponding to the decomposition of the bimt ligands and succinate groups. The polymer exhibits a strong fluorescence emission in the solid state at room temperature.     

A three‐dimensional open‐framework germanate containing four‐, five‐ and six‐coordinated germanium

A new three‐dimensional open‐framework germanate, namely ethylenediamine bis(ethylenediammonium) tetra­hydro­xo­octadecaoxononagermanate, (C₂H₈N₂)(C₂H₁₀N₂)₂[Ge₉O₁₈(OH)₄], has been synthesized hydro­thermally and its structure determined by single‐crystal X‐ray diffraction. The framework is built of [Ge₉O₂₂(OH)₄] units formed by four‐, five‐ and six‐oxy­gen‐coordinated germanium and templated by ethyl­enedi­amine. Three types of intersecting channels are formed in the framework, one by eight‐membered rings running along the b axis and the other two by ten‐membered rings running parallel to the a and c axes, respectively.     

A three‐dimensional network of cadmium

The title complex, poly­[bis­[N‐(2‐amino­ethyl)‐N‐methyl‐1,2‐ethane­di­amine]­hexa‐μ‐thio­cyanato‐tricadmium(II) monohydrate], [Cd₃(NCS)₆(medien)₂]_n·nH₂O [medien is N,N‐bis(2‐amino­ethyl)­methyl­amine, C₅H₁₆N₃], adopts a three‐dimensional inorganic polymeric network structure. Two cadmium centres (Cd1 and Cd2) are linked to each other via thio­cyanate bridges. The environment of the Cd1 atom involves only S atoms, making it soft, whereas the environment of the Cd2 atom involves only N atoms, making it hard.     

Characterization and gas adsorption of a novel three‐dimensional metal–organic framework (MOF) generated from a new polydentate fluorene‐bridged ligand

A polydentate ligand bridged by a fluorene group, namely 9,9‐bis(2‐hydroxyethyl)‐2,7‐bis(pyridin‐4‐yl)fluorene (L), has been prepared under solvothermal conditions in acetonitrile. Crystals of the three‐dimensional metal–organic framework (MOF) poly[[[μ₃‐9,9‐bis(2‐hydroxyethyl)‐2,7‐bis(pyridin‐4‐yl)fluorene‐κ³N:N′:O]bis(methanol‐κO)(μ‐sulfato‐κ²O:O′)nickel(II)] methanol disolvate], {[Ni(SO₄)(C₂₇H₂₄N₂O₂)(CH₃OH)]·2CH₃OH}_n, (I), were obtained by the solvothermal reaction of L and NiSO₄ in methanol. The ligand L forms a two‐dimensional network in the crystallographic bc plane via two groups of O—H…N hydrogen bonds and neighbouring two‐dimensional planes are completely parallel and stack to form a three‐dimensional structure. In (I), the Ni^II ions are linked by sulfate ions through Ni—O bonds to form inorganic chains and these Ni‐containing chains are linked into a three‐dimensional framework via Ni—O and Ni—N bonds involving the polydentate ligand L. With one of the hydroxy groups of L coordinating to the Ni^II atom, the torsion angle of the hydroxyethyl group changes from that of the uncoordinated molecule. In addition, the adsorption properties of (I) with carbon dioxide were investigated.     

Green conversion of a three‐dimensional organometallic coordination polymer to a three‐dimensional organometallic supramolecular polymer upon mechanochemical 2‐aminopyridine addition

Green conversion of three‐dimensional organometallic [Ag₂(μ₆‐tp)]_n ( 1 ) coordination polymer (CP) nanosheets, prepared by sonochemical procedure, to three‐dimensional organometallic [Ag₂(μ₄‐tp)(apy)₂]_n ( 2 ) (where H₂tp = terephthalic acid and apy = 2‐aminopyridine) CP nanoparticles has been observed upon solid‐state mechanochemical reaction of compound 1 with 2‐aminopyridine. The AgO₃ Ag ···C₆ coordination sphere of silver ion in 1 changed to NO₂ Ag ···C coordination sphere in 2 during this mechanochemical addition. These samples were characterized by infrared spectroscopy, thermogravimetric and differential thermal analyses, X‐ray powder diffraction and scanning electron microscopy.     

A three‐dimensional twofold interpenetrated cobalt(II) MOF containing a flexible carboxylate‐based ligand: synthesis,structure and magnetic properties

The design and synthesis of coordination polymers (CPs) have attracted much interest due to the intriguing diversity of their architectures and topologies. The functional solid catena‐poly[μ₂‐aqua‐triaqua{μ₄‐5‐[4‐carboxyphenoxy)methyl]benzene‐1,3‐dicarboxylato}{μ₃‐5‐[4‐carboxyphenoxy)methyl]benzene‐1,3‐dicarboxylato}dicobalt(II)], [Co₂(C₁₆H₁₀O₇)₂(H₂O)₄]_n or [Co₂(HL)₂(μ₂‐H₂O)(H₂O)₃]_n, was synthesized successfully by self‐assembly of Co^II ions with 5‐[(4‐carboxyphenoxy)methyl]isophthalic acid (H₃L). The title compound was obtained under hydrothermal conditions and exhibits a twofold interpenetrated three‐dimensional skeleton with hms 3,5‐conn topology according to the cluster representation for valence‐bonded metal–organic frameworks (MOFs). It has been characterized by single‐crystal X‐ray diffraction, IR spectroscopy, powder X‐ray diffraction (PXRD), thermogravimetric analysis and susceptibility measurements. The antiferromagnetic coupling between adjacent Co^II centres occurs via superexchange through the ligands.     

4,6‐Diaminopyrimidine‐2(1H)‐thione hemihydrate: a three‐dimensional hydrogen‐bonded framework

In the title compound, C₄H₆N₄S·0.5H₂O, there are two independent pyrimidinethione units, both of which lie across mirror planes in the space group Cmca. Hence, the H atoms bonded to the ring N atoms in each molecule are disordered over two symmetry‐related sites, each having an occupancy of 0.5. The water molecule lies across a twofold rotation axis parallel to [010]. The molecular components of (I) are linked by seven independent hydrogen bonds, of N—H...N, N—H...S, N—H...O and O—H...S types. A combination of disordered N—H...N hydrogen bonds and ordered N—H...S hydrogen bonds links the pyrimidinethione units into a continuous tubular structure. The water molecule acts as both a double donor of hydrogen bonds and a double acceptor, forming hydrogen bonds with components of four distinct pyrimidinethione tubes, thus linking these tubes into a three‐dimensional structure.     

A new three‐dimensional anionic cadmium(II) dicyanamide network

A new cadmium dicyanamide complex, poly[tetramethylphosphonium [μ‐chlorido‐di‐μ‐dicyanamido‐κ⁴N¹:N⁵‐cadmium(II)]], [(CH₃)₄P][Cd(NCNCN)₂Cl], was synthesized by the reaction of tetramethylphosphonium chloride, cadmium nitrate tetrahydrate and sodium dicyanamide in aqueous solution. In the crystal structure, each Cd^II atom is octahedrally coordinated by four terminal N atoms from four anionic dicyanamide (dca) ligands and by two chloride ligands. The dicyanamide ligands play two different roles in the building up of the structure; one role results in the formation of [Cd(dca)Cl]₂ building blocks, while the other links the building blocks into a three‐dimensional structure. The anionic framework exhibits a solvent‐accessible void of 673.8 ų, amounting to 47.44% of the total unit‐cell volume. The cavities in the network are occupied by pairs of tetramethylphosphonium cations.     

N‐(4‐Nitrobenzoyl)‐N′‐phenylhydrazine: a three‐dimensional hydrogen‐bonded framework

In the title compound (systematic name: N‐anilino‐4‐nitrobenzamide), C₁₃H₁₁N₃O₃, the molecules are linked into a complex three‐dimensional framework structure by a combination of two‐centre N—H...O and C—H...O hydrogen bonds and a three‐centre N—H...(O,N) hydrogen bond.