The effect of different treatment methods of multiwalled carbon nanotubes on thermal and flexural properties of their epoxy nanocomposites

Multiwalled carbon nanotubes (MWCNTs) were oxidized using four different acid‐treatment methods followed by their functionalization with 3‐aminopropyltriethoxysilane (3‐APTES). Diglycidyl ether of bisphenol A (DGEBA) nanocomposites with unmodified and silanized MWCNTs (0.2 wt %) were prepared by a cast molding method. The effect of functionalization of MWCNTs on thermal, flexural, and morphological properties of the epoxy nanocomposites were studied. The epoxy/MWCNTs nanocomposites were characterized by thermogravimetric analysis, flexural testing, and field emission electron microscopic analysis. The results showed that the silanization of MWCNTs which were oxidized by a two‐step process using nitric acid and hydrochloric acid showed better thermal and flexural properties due to good interfacial adhesion between MWCNTs and the epoxy matrix. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1175–1184, 2010     

Comparison of the properties of waterborne polyurethane/multiwalled carbon nanotube and acid‐treated multiwalled carbon nanotube composites prepared by in situ polymerization

A series of waterborne polyurethane (WBPU)/multiwalled carbon nanotube (CNT) and WBPU/nitric acid treated multiwalled carbon nanotube (A‐CNT) composites were prepared by in situ polymerization in an aqueous medium. The optimum nitric acid treatment time was about 0.5 h. The effects of the CNT and A‐CNT contents on the dynamic mechanical thermal properties, mechanical properties, hardness, electrical conductivity, and antistatic properties of the two kinds of composites were compared. The tensile strength and modulus, the glass‐transition temperatures of the soft and hard segments (T_gs and T_gh, respectively), and ΔT_g (T_gh − T_gs) of WBPU for both composites increased with increasing CNT and A‐CNT contents. However, these properties of the WBPU/A‐CNT composites were higher than those of the WBPU/CNT composites with the same CNT content. The electrical conductivities of the WBPU/CNT1.5 and WBPU/A‐CNT1.5 composites containing 1.5 wt % CNTs (8.0 × 10⁻⁴ and 1.1 × 10⁻³ S/cm) were nearly 8 and 9 orders of magnitude higher than that of WBPU (2.5 × 10⁻¹² S/cm), respectively. The half‐life of the electrostatic charge (τ_1/2) values of the WBPU/CNT0.1 and WBPU/A‐CNT0.1 composites containing 0.1 wt % CNTs were below 10 s, and the composites had good antistatic properties. From these results, A‐CNT was found to be a better reinforcer than CNT. These results suggest that WBPU/A‐CNT composites prepared by in situ polymerization have high potential as new materials for waterborne coatings with good physical, antistatic, and conductive properties. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3973–3985, 2005     

Polymorphism of nylon‐6 in multiwalled carbon nanotubes/nylon‐6 composites

The effects of pristine and amino‐functionalized multiwalled carbon nanotubes (MWNTs) on the crystallization behaviors of nylon‐6 were investigated by differential scanning calorimetry and X‐ray diffraction. The results indicate the presence of polymorphism in nylon‐6 and its composites, which is dependent on the MWNTs concentration and the cooling rate. More MWNTs and slow cooling from the melt favors the formation of α crystalline form. With the increase in cooling rates, the crystallinity of neat nylon‐6 decreases, and that of the composites decreases initially but increases afterward. Moreover, the degree of crystallinity of the composites is higher than neat nylon‐6 under high cooling rates, counter to what is observed under low cooling rates. The heterogeneous nucleation induced by MWNTs and the restricted mobility of polymer chains are considered as the main factors. Furthermore, addition of MWNTs increases the crystallization rate of α crystalline form but amino‐functionalization of MWNTs weakens this effect. The influence of thermal treatment on the crystalline structure of MWNTs/nylon‐6 composites is also discussed. A γ–α phase transition takes place at lower temperature for MWNTs/nylon‐6 composites than for nylon‐6. The annealing peaks of the composites annealed at 160 °C are higher than that of neat nylon‐6, and the highest annealing peak is obtained for amino‐functionalized MWNTs/nylon‐6 composites. This phenomenon is closely related to the different nucleation and recrystallization behaviors produced by various MWNTs in confined space. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1499–1512, 2006     

Polypropylene/carbon nanotube magnetic composites obtained using carbon nanotubes from sawdust

Magnetic polypropylene (PP) nanocomposites with different loadings (from 0.5 to 20 wt %) of carbon nanotubes with iron (CNT‐Fe) were fabricated using the melt‐mixing method. The carbon nanotubes were synthesized by pyrolysis of sawdust from the furniture industry. The morphological characterization shows homogenous dispersion of the filler in the polymer matrix. The addition of only 0.5 wt % CNT‐Fe already results in ferromagnetic behavior in the diamagnetic polymer matrix. The thermal properties were investigated using thermogravimetric analysis and differential scanning calorimetry. The results show an increase in the maximum degradation, crystallization, and melting temperatures of the nanocomposites compared with neat PP. The nanocomposites showed improvement in terms of mechanical and oxygen permeability properties. A very significant result of the work is the high remnant magnetization and coercivity values of the nanocomposites at room temperature whereas most of the works on similar systems show magnetic properties only at very low temperatures.     

Nylon 610/functionalized multiwalled carbon nanotube composite prepared from in‐situ interfacial polymerization

Pristine multiwalled carbon nanotubes (P‐MWNTs) were functionalized with 4‐chlorobenzoic acid via “direct” Friedel‐Crafts acylation in polyphosphoric acid (PPA)/phosphorous pentoxide (P₂O₅) medium. The resultant 4‐chlorobenzoyl‐functionalized MWNTs (F‐MWNTs) were soluble in chlorinated solvents such as dichloromethane, chloroform, and carbon tetrachloride. A large scale of nylon 610/F‐MWNT composite could be conveniently prepared by in situ interfacial polymerization of 1, 6‐hexamethylenediamine (HMDA) in an aqueous phase, and sebacoyl chloride with F‐MWNTs in an organic phase. Similarly, nylon 610/P‐MWNT composite was also prepared for comparison. The state of F‐MWNTs dispersion in nylon 610 matrix was distinctively better than that of P‐MWNTs, which could be clearly discerned by both naked eye and scanning electron microcopy (SEM). As a result, the tensile strength of nylon 610/F‐MWNT composite was 4.9‐fold higher than that of nylon 610/P‐MWNT composite. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6041–6050, 2008     

Crystallization,rheological, and mechanical properties of PLLA/PEG blend with multiwalled carbon nanotubes

Functionalized multiwalled carbon nanotubes (FMWCNTs) were introduced into poly(L‐lactide)/polyethylene glycol (PLLA/PEG) blend and the effects of FMWCNTs on crystallization behaviors, rheological, and mechanical properties of PLLA/PEG/FMWCNTs were investigated. The results show that FMWCNTs exhibit good distribution in the nanocomposites and absorb some PEG to agglomerate around them. The crystallization behavior of PLLA in the nanocomposites is greatly dependent on the content of FMWCNTs. At low content of FMWCNTs, the addition of FMWCNTs improves the crystallization behavior of PLLA by enhancing the crystallization temperature and accelerating the crystallization rate, whereas at high content of FMWCNTs, the crystallization of PLLA is restricted to a certain degree. Rheological properties show the formation of the network structure of FMWCNTs at high content, which is the main reason for the retarded crystallization behavior of PLLA due to the network structure providing restriction to mobility and diffusion of PLLA chains to crystal growth fronts. The mechanical properties show that FMWCNTs exhibit reinforcement effect for plasticized PLLA. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis,characterization, and electrical properties of polypyrrole/multiwalled carbon nanotube composites

Size‐controllable polypyrrole (PPy)/multiwalled carbon nanotube (MWCNT) composites have been synthesized by in situ chemical oxidation polymerization directed by various concentrations of cationic surfactant cetyltrimethylammonium bromide (CTAB). Raman spectra, FTIR, SEM, and TEM were used to characterize their structure and morphology. These results showed that the composites are core (MWCNT)–shell (PPy) tubular structures with the thickness of the PPy layer in the range of 20–40 nm, depending on the concentration of CTAB. Raman and FTIR spectra of the composites are almost identical to those of PPy alone. The electrical conductivities of these composites are 1–2 orders of magnitude higher than those of PPy without MWCNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6449–6457, 2006     

Facile approach to obtain individual‐nanotube dispersion at high loading in carbon nanotubes/polyimide composites

A big challenge in making a composite lies in achieving individual‐nanotube dispersion of carbon nanotubes (CNTs) in a polymer matrix, without aggregation and entanglement and excellent interfacial adhesion between the CNTs and the polymers matrix. In this communication, using polyethylene glycol‐200, we successfully prepared CNT‐reinforced polyimide composites that exhibit individual‐nanotube dispertion in the matrix at high‐loading CNT's. The content of CNTs in a composite can reach 43 wt%. Copyright © 2007 John Wiley & Sons, Ltd.     

Large‐compound vesicle‐encapsulated multiwalled carbon nanotubes: A unique route to nanotube composites

A simple and unique strategy for preparation of large‐compound vesicle (LCV)‐encapsulated multiwalled carbon nanotubes (MWCNTs) has been developed, and this involves dispersion of MWCNTs in H‐shaped copolymers solution in DMF and encapsulation of MWCNTs with LCVs formed from hydrolysis and polycondensation of ? Si(OCH₃)₃ groups in the amphiphilic H‐shaped copolymers, (PTMSPMA)₂PEG(PTMSPMA)₂. This unique noncovalent approach is nondestructive, and the original structure of MWCNTs remains in the resultant MWCNTs/LCVs nanocomposites. The morphologies of nanocomposites LCVs/MWCNTs are controlled by the chain length ratio (N_PTMSPMA/N_PEG) of PTMSPMA to PEG. For the H‐shaped copolymers with N_PMSPMA/N_PEG ≤ 1.7, they self‐assembled to form LCVs with dense cavities in the presence of MWCNTs in a mixture of DMF/H₂O. When this ratio was more than 2.0, the large‐compound micelle‐wrapped MWCNTs were produced. This approach is potentially useful for preparation of MWCNTs encapsulated with various morphologies of polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3669–3679, 2009     

Effects of processing conditions on rheological,thermal, and electrical properties of multiwall carbon nanotube/epoxy resin composites

We report on the effect of processing conditions on rheology, thermal and electrical properties of nanocomposites containing 0.02–0.3 wt % multiwall carbon nanotubes in an epoxy resin. The influence of the sonication, the surface functionalization during mixing, as well as the application of external magnetic field (EMF) throughout the curing process was examined. Rheological tests combined with optical microscopy visualization are proved as a very useful methodology to determine the optimal processing conditions for the preparation of the nanocomposites. The Raman spectra provide evidence for more pronounced effect on the functionalized with hardener compositions, particularly by curing upon application of EMF. Different chain morphology of CNTs is created depending of the preparation conditions, which induced different effects on the thermal and electrical properties of the nanocomposites. The thermal degradation peak is significantly shifted towards higher temperatures by increasing the nanotube content, this confirming that even the small amount of carbon nanotubes produces a strong barrier effect for the volatile products during the degradation. The ac conductivity measurements revealed lower values of the percolation threshold (pc) in the range of 0.03–0.05 wt %. CNTs for the nanocomposites produced by preliminary dispersing of nanotubes in the epoxy resin, compared to those prepared by preliminary functionalization of the nanotubes in the amine hardener. This is attributed to the higher viscosity and stronger interfacial interactions of the amine hardener/CNT dispersion which restricts the reorganization of the nanotubes. The application of the EMF does not influence the pc value but the dc conductivity values (σ_dc) of the nanocomposites increased at about one order of magnitude due to the development of the aforementioned chain structure. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

The effect of a semi‐industrial masterbatch process on the carbon nanotube agglomerates and its influence in the properties of thermoplastic carbon nanotube composites

This study details an industrial process to prepare polypropylene (PP) composites reinforced with different loadings (0.5–10wt.%) of carbon nanotubes (CNTs) from a direct dilution of a masterbatch produced by an optimized extrusion compounding process. The work demonstrates how the anisotropy in the distribution of CNTs can have a positive effect on the electrical conductivity and fracture toughness of the resulting composites. The composite with the highest loading of CNTs had an electrical conductivity of 10^?2 S/m comparable with those reported in the available literature. The composites showed anisotropy in their properties that seems to be caused by the non‐homogeneous distribution of the agglomerates produced by the orientation of the flow direction during the injection process. The composites produced in this work exhibited a fracture toughness up to 55% higher than neat PP and failed by polymer ductile tearing. It was found that the CNT agglomerates distributed throughout the matrix increased the toughness of PP by promoting plastic deformation of the matrix during the fracture process and by a slight load transfer between the polymer matrix and the CNTs of the agglomerates. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 189–197     

New melt mixing polyethylene multiwalled carbon nanotube nanocomposites with very low electrical percolation threshold

The present work focuses on the study of the electrical properties of high‐density polyethylene (HDPE)/multiwalled carbon nanotube (MWCNT) nanocomposites. The samples were produced by melt mixing by diluting a masterbatch of HDPE/MWCNT using two types of mini‐extruders in order to see the influence of the shear processing on the electrical properties. The dielectric relaxation spectroscopy was used for the investigation of the electrical properties in the studied samples. The composites dc conductivity (σ_dc) follows the scaling low derivate from the percolation theory of the form σ_dc ~ (p ? p_c)^t. A low electrical percolation (p_c ≈ 0.3 ? 0.4 vol. %) was found in both cases. The critical exponent t had a value very close to the theoretical one for a percolation network in three dimensions (t ≈ 2). The analysis of the morphology of the nanocomposites showed a good and homogeneous dispersion of the fillers in the PE matrix. The effect of the incorporation of MWCNTs on the dynamic mechanical and thermal behaviors was also presented. The MWCNTs have improved the mechanical properties of the polyethylene matrix and increased the crystallization temperatures. Copyright © 2013 John Wiley & Sons, Ltd.     

多壁碳纳米管表面L-组氨酸手性印迹聚合材料的制备及性能表征

通过酰胺化反应在多壁碳纳米管（MWNTs）表面接枝双键,以L-组氨酸（L-His）为模板,甲基丙烯酸（MAA）为功能单体,乙二醇二甲基丙烯酸酯（EGDMA）为交联剂,偶氮二异丁腈（AIBN）为引发剂,利用表面印迹技术,在MWNTs表面制备印迹聚合物（MWNTs-MIPs）．采用红外光谱,扫描电子显微镜和热重分析表征印迹聚合物的性质,结果表明MWNTs表面成功接枝了一层稳定的、厚度为35～40nm具有识别能力的印迹聚合材料．结合高效液相色谱技术,通过填充色谱柱在线色谱分析,探讨不同pH值的流动相下该印迹材料对L-His的分离行为,结果表明MWNTs—MIPs色谱柱在流动相pH=7．0时分离效果最好,能够选择性地识别L-His和D-His,分离度R为1．78,选择因子α为1．28．     

Norbornene/n‐Butyl methacrylate copolymerization over α‐Diimine nickel and palladium catalysts supported on multiwalled carbon nanotubes

The covalently immobilized multiwalled carbon nanotubes (MWNTs) supported three‐dimensional geometry α‐diimine nickel, palladium catalysts are prepared by corresponding α‐diimine nickel, palladium complexes and activated MWNTs. The molecular structures of the catalysts have been confirmed by X‐ray single‐crystal analyses, NMR and XPS, as well as elemental analysis. Compared with nickel, palladium catalysts without modification and physical mixing of nickel, palladium catalysts with MWNTs, the MWNTs supported nickel, palladium catalysts show improved activity and productivity in norbornene homopolymerization and copolymerization with polar monomer. The morphology of the resulting polymers obtained from MWNTs‐supported nickel(II) complex reveals that the MWNTs are dispersed uniformly in polymer and wrapped by polymers to squeeze out of spherical particles, leading to the enhanced processability and mechanical properties. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3213–3220     

The effect of localized lateral growth of multiwalled carbon nanotubes with ammonia plasma post‐treatment

We present horizontally‐oriented multiwalled carbon nanotubes (CNTs) grown by means of thermal chemical vapor deposition. The CNT is across the trenches of the catalytic metals on predefined Ti electrodes. The properties of the lateral multiwalled CNT, following post‐ammonia plasma treatment, are reported. Information about the ammonia plasma treated on the interface structure of CNT is obtained using X‐ray photoelectron spectroscopy. The experimental results show that upon exposure to ammonia, the electrical property of the CNT is found to increase. Copyright © 2012 John Wiley & Sons, Ltd.     

Studies on fracture behaviors of immiscible polypropylene/ethylene‐co‐vinyl acetate blends with multiwalled carbon nanotubes

Immiscible polypropylene/ethylene‐co‐vinyl acetate (PP/EVA) blends with two different compositions, one (PP/EVA = 80/20) exhibits the typical sea‐island morphology and the other (PP/EVA = 60/40) exhibits the cocontinuous morphology, were prepared with different contents of f‐MWCNTs. The fracture behaviors, including notched Izod impact fracture and single‐edge notched tensile (SENT) fracture, were comparatively studied to establish the role of f‐MWCNTs in influencing the fracture toughness of PP/EVA blends. Our results showed that, for PP/EVA (80/20) system, f‐MWCNTs do not induce the fracture behavior change apparently. However, for PP/EVA (60/40) system, the fracture toughness of the blend increases dramatically with the increasing of f‐MWCNTs content. More severe plastic deformation accompanied by the fibrillar structure formation was observed during the SENT test. Furthermore, SENT test shows that the significant improvement in fracture toughness of PP/EVA (60/40) with f‐MWCNTs is contributed to the simultaneous enhancement of crack initiation energy and crack propagation energy, but largely dominated by crack propagation stage. Further results based on crystalline structures and morphologies of the blends showed that a so‐called dual‐network structure of EVA and f‐MWCNTs forms in cocontinuous PP/EVA blends, which is thought to be the main reason for the largely improved fracture toughness of the sample. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1331–1344, 2009     

Novel UV initiator for functionalization of multiwalled carbon nanotubes by atom transfer radical polymerization applied on two different grades of nanotubes

A novel nonoxidative method for preparation of functionalized multiwalled carbon nanotubes (MWCNT) has been developed based on a UV sensitive initiator for atom transfer radical polymerization (ATRP). The method has been investigated with respect to ligands and polymerization time for the preparation of polystyrene functionalized MWCNT. It was found that pentamethyldiethylenetriamine (PMDETA) gave superior results with higher loading in shorter polymerization time. A comparative study of the method applied on two different grades of nonoxidized MWCNT has been performed, illustrating large differences in reactivity and polymer loading, underlining the importance of the choice of MWCNT starting material. In addition to styrene, also poly(ethylene glycol) methacrylate (PEGMA) was shown to polymerize from the surface of the MWCNT. Finally, initial results from composites of polystyrene or polyphenylenesulfide are presented. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Improving dispersion and integration of single‐walled carbon nanotubes in epoxy composites by using a reactive noncovalent dispersant

Uniform dispersion and strong interfacial interaction are two critical prerequisites for application of single‐walled carbon nanotubes (SWNTs) in polymer composites. To endow the composites with multifunctional feature, no damage on the chemical/electronic structure of SWNTs is also usually required. With these ends in view, two epoxide‐containing pyrene derivatives (EpPys) were designed, synthesized, and used as reactive noncovalent dispersants for developing multifunctional epoxy/SWNT composites. One having longer chain length between epoxide group and pyrene moiety, that is, EpPy‐16, shows higher dispersing efficiency and provides the nanotube dispersion with better stability, thus picking up for subsequent studies. Systematic characterization on SWNT/EpPy‐16 hybrid demonstrates that 13.2 wt % of EpPy‐16 is adsorbed on the SWNT surface through strong π‐stacking interaction, and intrinsic electronic structure of SWNTs is basically reserved. The solution‐based process adopted here preserves the good SWNT dispersing state in dispersion into the composites. Simultaneously, enhanced interfacial interaction is also realized by using EpPy‐16, which interacts noncovalently with SWNT but connects covalently to epoxy network. As a result, the composites acquire 37 and 22% increments in tensile strength and Young's modulus, respectively, relative to that of neat resin. A low‐electrical percolation threshold of 0.1 wt % SWNTs and improved thermal properties were also observed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of multiwalled carbon nanotube/fluorine‐containing poly(p‐phenylene benzoxazole) composites exhibiting greatly enhanced dielectric constants

A series of high‐performance polymer/carbon nanotube (CNT) composites with different nanotube contents have been prepared via condensation of N‐silylated diamino terminated precursor of the polymer with acid chloride‐functionalized CNTs and subsequent thermal cyclodehydration. The composites have been fully characterized by infrared and Raman spectroscopy, electron microscopy, and thermal analysis. Various interesting morphologic features including helical structures have been observed in the composites as a result of covalent attachment of the polymer. The composites exhibit excellent thermal stability and a significant improvement in the dielectric constant and mechanical strength with the inclusion of CNTs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A comparative study of biochar,multiwalled carbon nanotubes and graphitized carbon black as QuEChERS absorbents for the rapid determination of six triazole fungicides by UPLC-MS/MS

A rapid, effective and sensitive method to quantitatively determine six fungicide residue was developed using ultra-performance liquid chromatography coupled with tandem mass spectrometry (UPLC–MS/MS). The target compounds were extracted by using acetonitrile and the sorbent used for clean-up in this modified QuEChERS analytical method were biochar, multiwalled carbon nanotubes (MWCNT) and graphitized carbon black (GCB). Results indicated that the MWCNT (10 mg) was the most effective sorbent in removing pigment. This method was validated on spinach, tomato, cucumber, celery, lettuce, rape, pakchoi, romaine lettuce and eggplant matrices spiked at three concentration levels of 0.01, 0.1 and 1 mg kg^?1. It exhibited recoveries between 73.1% and 118.2% with RSD values below 20%. Matrix-matched calibrations were performed with the coefficients of determination >0.9901 between concentration levels of 0.01–1 mg kg^?1. The limit of quantity (LOQ) for six pesticides ranged from 0.0036 to 0.011 mg kg^?1. The developed method was satisfactorily applied to determine pesticide residues in market vegetable samples.