后处理工艺制备多级孔Ti-BEA沸石及其环氧化催化性能

基于脱铝多级孔BEA沸石与二氯二茂钛的固相反应,开展了钛掺杂量可调的多级孔Ti-beta后处理工艺制备研究.对制备的多级孔Ti-beta样品的理化性质进行了表征,包括X射线衍射、氮气吸附脱附测试、扫描电镜、透射电镜、紫外可见吸收光谱和紫外拉曼光谱等.结果表明,多级孔BEA沸石具有较好的化学稳定性,脱铝-钛化的后处理过程未对样品多级孔结构产生明显影响. 以环己烯和十二烯的烯烃环氧化为探针反应表征了合成多级孔Ti-beta与纯相微孔Ti-beta沸石的催化性能.结果表明,在小分子环己烯的环氧化反应中,多级孔Ti-beta沸石的催化活性(转化率59.4%)与微孔Ti-beta相当(转化率57.9%);但是在较大分子十二烯的催化反应中,多级孔结构Ti-beta材料的催化性能(转化率11.1%)明显优于纯相微孔材料(转化率6.8%),且产物中环氧化物选择性更高(分别为60.3%和37.8%).     

Hard and soft X-ray microscopy and tomography in catalysis: bridging the different time and length scales

X-ray microscopic techniques are excellent and presently emerging techniques for chemical imaging of heterogeneous catalysts. Spatially resolved studies in heterogeneous catalysis require the understanding of both the macro and the microstructure, since both have decisive influence on the final performance of the industrially applied catalysts. A particularly important aspect is the study of the catalysts during their preparation, activation and under operating conditions, where X-rays have an inherent advantage due to their good penetration length especially in the hard X-ray regime. Whereas reaction cell design for hard X-rays is straightforward, recently smart in situ cells have also been reported for the soft X-ray regime. In the first part of the tutorial review, the constraints from a catalysis view are outlined, then the scanning and full-field X-ray microscopy as well as coherent X-ray diffraction imaging techniques are described together with the challenging design of suitable environmental cells. Selected examples demonstrate the application of X-ray microscopy and tomography to monitor structural gradients in catalytic reactors and catalyst preparation with micrometre resolution but also the possibility to follow structural changes in the sub-100 nm regime. Moreover, the potential of the new synchrotron radiation sources with higher brilliance, recent milestones in focusing of hard X-rays as well as spatiotemporal studies are highlighted. The tutorial review concludes with a view on future developments in the field of X-ray microscopy that will have strong impact on the understanding of catalysts in the future and should be combined with in situ electron microscopic studies on the nanoscale and other spectroscopic studies like microRaman, microIR and microUV-vis on the macroscale.     

Perovskite Scintillators for Improved X-ray Detection and Imaging

Halide perovskites (HPs) recently have emerged as one class of competitive scintillators for X-ray detection and imaging owing to its high quantum efficiency, short decay time, superior X-ray absorption capacity, low cost, and ease of crystal growth. The tunable structure and versatile chemical compositions of halide perovskites provide distinguishable advantages over traditional inorganic scintillators for optimizing scintillation performance. Since the first observation of the scintillation phenomenon in HPs, substantial efforts have been devoted to expanding the inventory of HP scintillators and regulating material properties. Understanding the relationship between the structure and scintillation properties of HP scintillators is essential for developing materials with improved X-ray detection and imaging capacities. This review summarizes strategies for improving the light yield of HP scintillators and provides a roadmap for improving the X-ray imaging performance. Additionally, methods for controlling the light propagation direction in HP scintillators are highlighted for improving X-ray imaging resolution. Finally, we highlight the current challenge in HP scintillators and provide a perspective on the future development of this emerging scintillator.     

薄层大面积自支撑碳纳米管电极材料的电容脱盐性能

以具有三维开放网络结构的烧结8 μm-Ni金属纤维(SMF-Ni)为基底, 通过乙烯催化化学气相沉积法在金属纤维表面生长碳纳米管(CNTs), 制备了以金属Ni纤维网络为集流极、CNTs为离子存储库, 尺度跨越宏观、介观和纳米的自支撑薄层大面积CNTs/SMF-Ni(CNTs质量分数为50%)复合电极材料. 用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶变换红外光谱(FTIR)、N₂吸附、脱附等温线和X射线衍射(XRD)等方法对电极材料进行了表征, 并考察了其作为电极对质量分数为0.01%的NaCl水溶液的电容脱盐性能. 自支撑CNTs/SMF-Ni复合电极材料由于具有优异的离子传导和表面电荷传递性能以及较大的介孔表面积, 在1.2 V的工作电压和5 mL/min的水溶液流速下, 对NaCl的电吸附容量和脱盐率分别达159 μmol/g CNTs和57%. 用H₂O₂对CNTs/SMF-Ni电极材料进行氧化处理后, CNTs表面含氧基团的大量增加增大了材料的亲水性, 从而进一步提升了该复合材料的电容脱盐性能.     

Application of analytical transmission electron microscopy to the characterization of interlayers in fibre-reinforced composites with ceramic and glass matrices

The microchemistry of interfaces and corresponding interlayers in different fibre-reinforced ceramic and glass composite systems has been investigated by using a dedicated scanning transmission electron microscope demonstrating the potential applicabilities of such an instrument to this large field of materials science. Energy-dispersive X-ray spectroscopy and electron energy loss spectroscopy were used to determine the materials composition on a nanometre scale. Besides analyses performed in the spot mode of the electron probe the distributions of the elements present in the interface region were measured as line profiles across the relevant interface structure by X-ray spectroscopy with a lateral resolution of about 5 nm, even for the detection of a light element as carbon. Moreover, in the composite systems under investigation the two-dimensional element distribution was also attained by energy-filtered imaging. In addition, first results of energy loss near edge structure analyses are presented indicating variations of the chemical bonding of silicon at the interface in a Nicalon fibre/Duran glass composite.     

多级孔钛硅分子筛的制备及应用进展

以钛硅分子筛(TS-1)为催化剂的选择性催化氧化工艺具有反应条件温和、产物选择性高及环境污染小等特点,促进了烃类催化氧化反应的绿色化发展.但常规TS-1分子筛狭窄的孔道限制了其在大分子催化氧化反应中的应用.多级孔TS-1分子筛为包含不同尺度的孔道结构的晶体沸石,兼具微孔分子筛晶体优异的水热稳定性和介孔材料优异的扩散传输性能,因此其受到国内外众多专家学者的广泛关注.多级孔TS-1分子筛的制备方法很多,主要有直接合成法和后处理法,其中直接合成法包括硬模板法、软模板法和自组装法,而后处理制备主要为碱处理法.我们在对多级孔TS-1分子筛制备方法进行归纳总结的基础上,探讨不同制备方法对分子筛中钛硅物种分布、孔道结构及催化烃类选择性氧化反应性能的影响.结合目前TS-1分子筛应用现状,对其未来发展进行展望.     

Chemical imaging of catalytic solids with synchrotron radiation

Heterogeneous catalysis is a term normally used to describe a group of catalytic processes, yet it could equally be employed to describe the catalytic solid itself. A better understanding of the chemical and structural variation within such materials is thus a pre-requisite for the rationalising of structure-function relationships and ultimately to the design of new, more sustainable catalytic processes. The past 20 years has witnessed marked improvements in technologies required for analytical measurements at synchrotron sources, including higher photon brightness, nano-focusing, rapid, high resolution data acquisition and in the handling of large volumes of data. It is now possible to image materials using the entire synchrotron radiative profile, thus heralding a new era of in situ/operando measurements of catalytic solids. In this tutorial review we discuss the recent work in this exciting new research area and finally conclude with a future outlook on what will be possible/challenging to measure in the not-too-distant future.     

蒸汽辅助结晶法合成多级孔整体型ZSM-5分子筛

多级孔分子筛由于其高的比表面积、良好的传质性能和可调控的孔径等特性,引起了广大科研工作者的研究兴趣.近年来,通过选择性脱除骨架硅或铝,成功合成了多级孔沸石分子筛材料.但是由于骨架原子的脱除使分子筛的结晶度降低,进而使其催化效率降低.通过硬模板法(如炭黑、介孔硅球、气凝胶等),也用于合成多级孔沸石分子筛.然而,这种方法制备过程较为复杂,且成本较高.因此,亟需发展新的多级孔分子筛的制备方法.此外,在工业应用中,沸石分子筛催化剂通常需要做成整体柱状或片形以消除固定床反应器的床层压降.合成整体型沸石分子筛的传统方法是在沸石分子筛成型过程中添加SiO2和Al2O3等无机粘结剂.虽然该方法简单易行,但沸石分子筛的孔道结构容易被破坏,而且无机粘结剂的存在使分子筛活性中心的密度减少.为了解决这些问题,合成整体型多级孔沸石分子筛,不仅具有较强的机械稳定性,适应于工业,而且其多级孔道有利于分子的扩散,从而具有较高的催化活性.针对上述问题,我们以海绵作为模板,通过蒸汽辅助结晶(steam-assisted crystallization,SAC)方法,制备具有多级孔道的整体型ZSM-5分子筛.通过X射线衍射(XRD)、氮吸附脱附、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、固态核磁共振和氨气的程序升温脱附(NH3-TPD)等手段对分子筛进行了结构与性质表征.XRD和固态核磁共振的结果表明,成功合成了不同Si/Al的ZSM-5分子筛.SEM和TEM结果进一步确定了合成的整体型多级孔ZSM-5分子筛(记作M-ZSM-n,n代表Si/Al的摩尔比),由于分子筛颗粒的堆积形成的介孔,海绵模板提供的固体骨架形成的大孔,分子筛本身的微孔,共同构成了微孔-介孔-大孔的整体型ZSM-5分子筛.透射电子显微镜上配备的X射线能谱仪(EDS)结果表明,分子筛中的Si和Al元素能够均匀的分布.氮吸附脱附证明所得整体型分子筛具有明显的介孔结构.NH3-TPD结果表明,不同Si/Al的整体型多级孔ZSM-5分子筛具有不同强度的酸性,其酸性强度:ZSM-5(60)相似文献   

Syntheses, properties and applications of periodic mesoporous organosilicas prepared from bridged organosilane precursors

Periodic mesoporous organosilicas (PMOs) prepared by surfactant-directed polycondensation of bridged organosilane precursors are promising for a variety of next-generation functional materials, because their large surface areas, well-defined nanoporous structures and the structural diversity of organosilica frameworks are advantageous for functionalization. This critical review highlights the unique structural features of PMOs and their expanding potential applications. Since the early reports of PMOs in 1999, various synthetic approaches, including the selection of hydrolytic reaction conditions, development of new precursor compounds, design of templates and the use of co-condensation or grafting techniques, have enabled the hierarchical structural control of PMOs from molecular- and meso-scale structures to macroscopic morphology. The introduction of functional organic units, such as highly fluorescent π-conjugates and electroactive species, into the PMO framework has opened a new path for the development of fluorescent systems, sensors, charge-transporting materials and solid-state catalysts. Moreover, a combinational materials design approach to the organosilica frameworks, pore wall surfaces and internal parts of mesopores has led to novel luminescent and photocatalytic systems. Their advanced functions have been realized by energy and electron transfer from framework organics to guest molecules or catalytic centers. PMOs, in which the precise design of hierarchical structures and construction of multi-component systems are practicable, have a significant future in a new field of functional materials (93 references).     

X-ray and NMR crystallography in an enzyme active site: the indoline quinonoid intermediate in tryptophan synthase

Chemical-level details such as protonation and hybridization state are critical for understanding enzyme mechanism and function. Even at high resolution, these details are difficult to determine by X-ray crystallography alone. The chemical shift in NMR spectroscopy, however, is an extremely sensitive probe of the chemical environment, making solid-state NMR spectroscopy and X-ray crystallography a powerful combination for defining chemically detailed three-dimensional structures. Here we adopted this combined approach to determine the chemically rich crystal structure of the indoline quinonoid intermediate in the pyridoxal-5'-phosphate-dependent enzyme tryptophan synthase under conditions of active catalysis. Models of the active site were developed using a synergistic approach in which the structure of this reactive substrate analogue was optimized using ab initio computational chemistry in the presence of side-chain residues fixed at their crystallographically determined coordinates. Various models of charge and protonation state for the substrate and nearby catalytic residues could be uniquely distinguished by their calculated effects on the chemical shifts measured at specifically (13)C- and (15)N-labeled positions on the substrate. Our model suggests the importance of an equilibrium between tautomeric forms of the substrate, with the protonation state of the major isomer directing the next catalytic step.     

等级孔分子筛的可控合成、扩散研究及催化应用

等级孔分子筛是一类具有两种或多种以特定形式排布的孔结构的分子筛材料. 多层等级的孔结构使得分子筛孔道内的分子扩散得到显著改善, 进而提升了其在吸附和非均相催化等领域的应用性能. 等级孔分子筛的制备策略通常有两种, 即“自上而下”后处理法(如对母样分子筛进行脱铝、 脱硅产生介孔)和“自下而上”合成法(如软模板、 硬模板法). 本文主要对近20年来等级孔分子筛的合成方法进行了梳理, 并着重介绍了具有较高应用潜力的“自上而下”制备法. 鉴于合成等级孔分子筛的主要目的是提高分子的晶内扩散, 对近年来客体分子在等级孔分子筛内扩散的实验研究也进行了简要综述. 此外, 本文还综合评述了等级孔分子筛与传统分子筛在催化应用中的对比, 以展示前者在提升催化性能方面(如活性、 选择性等)的独特优势.     

Catalytic Performance of Graphite Oxide Supported Au Nanoparticles in Aerobic Oxidation of Benzyl Alcohol: Support Effect

Various Au/GO catalysts were prepared by depositing Au nanoparticles on thermally- and chemically-treated graphite oxide (GO) supports using a sol-immobilization method. The surface chemistry and structure of GO supports were characterized by a series of analytical techniques including X-ray photoelectron spectroscopy, temperature-programmed desorption and Raman spectroscopy. The results show that thermal and chemical treatments have large influence on the presence of surface oxygenated groups and the crystalline structure of GO supports. A strong support effect was observed on the catalytic activity of Au/GO catalysts in the liquid phase aerobic oxidation of benzyl alcohol. Compared to the amount and the type of surface oxygen functional groups, the ordered structure of GO supports may play a more important role in determining the catalytic performance of Au/GO catalysts.     

多级孔NiMo负载TS-1分子筛催化剂的制备及其加氢脱硫性能

钛硅(TS-1)分子筛的微孔孔道严重限制了其在复杂分子催化转化中的应用,为了克服这一问题,通过酸洗脱、碱刻蚀及二者相结合的方法制备了多级孔TS-1分子筛,并采用等体积共浸渍法制备了相应的NiMo负载型催化剂;使用X射线衍射(XRD)、N₂吸附-脱附、吡啶吸附红外光谱(Py-FTIR)、氢气程序升温还原(H₂-TPR)、X射线光电子能谱(XPS)和高分辨透射电子显微镜(HR-TEM)等方法对多级孔TS-1分子筛的理化性质进行了表征;以二苯并噻吩(DBT)为探针对催化剂的加氢脱硫(HDS)性能进行了评价。结果表明,和常规TS-1分子筛相比,多级孔TS-1分子筛保持了MFI拓扑结构,比表面积增大且具有介孔结构,分子筛表面形成了适量的Brønsted酸中心;相应催化剂上活性金属与载体间相互作用得以改善,MoS₂片晶长度和堆垛层数适宜,形成了更多的NiMoS活性相;催化剂活性和选择性均有所提升,尤其是酸洗脱获得的NiMo/AT-TS-1催化剂的活性相较未经处理的NiMo/TS-1催化剂提升了1.2倍,直接脱硫(DDS)路径选择性提升了22%。     

Catalytic performance of imidazole modified HZSM-5 for methanol to aromatics reaction

A facile approach was developed for the preparation of nano-sized HZSM-5 with a hierarchical mesoporous structure by adding imidazole into conventional zeolite synthesis precursor solution. The physicochemical properties of modified HZSM-5 were characterized by X-ray diffraction(XRD), N_2 adsorption–desorption isotherms, scanning electron microscopy(SEM), NH_3-temperature-programmed desorption(NH_3-TPD) and pyridine adsorption infrared spectroscopy(Py-IR). The coke in spent catalysts was characterized by thermogravimetry(TG). The results showed that hierarchical HZSM-5 zeolites with excellent textural properties, such as abundant porous structure, uniform particle size and suitable acidity, could be synthesized by the recipe of one-pot synthesis routes. Moreover, the obtained HZSM-5 exhibited higher selectivity of total aromatics as well as longer lifetime in the catalytic conversion of methanol to aromatics, comparing with conventional HZSM-5. It is expected that the synthesis approach demonstrated here will be applicable to other zeolites with particular textural properties and controllable particle sizes, facilitating the emergence of new-type porous materials and their related applications in catalysis and separation.     

Molecular Imprinting in Cross-Linked Materials with the Aid of Molecular Templates— A Way towards Artificial Antibodies

Can binding sites be produced in organic or inorganic polymers—similar to those in antibodies—which are able to recognize molecules and which may have catalytic action? In this article we review a method, analogous to a mechanism of antibody formation proposed earlier, by which in the presence of interacting monomers a cross-linked polymer is formed around a molecule that acts as a template. After removal of the template, an imprint containing functional groups capable of chemical interaction remains in the polymer. The shape of the imprint and the arrangement of the functional groups are complementary to the structure of the template. If chiral templates are used, the success of the imprinting process can be assessed by the ability of the polymer to resolve the racemate of the template molecule. Through optimization of the process has led to chromatographic separation factors of α = 4–8, and to base line separations. There is also great interest in the surface imprinting of solid materials and monolayers. In all cases, the structure of the polymeric matrix in the imprinted materials and the function of the binding groups are of crucial importance. The mechanisms of imprinting and molecular recognition of substrates are by now well understood. A large number of potential applications for this class materials are being intensively developed, for example in the chromatogrphic resolution of recemates, and as artificial antibodies, chemosensors, and selective catalysts. The use of similarly produced materials as enzyme models is also of great interest.     

How to determine structures when single crystals cannot be grown: opportunities for structure determination of molecular materials using powder diffraction data

Many crystalline solids cannot be prepared as single crystals of sufficient size and/or quality for structure determination to be carried out using single crystal X-ray diffraction techniques. In such cases, when only polycrystalline powders of a material are available, it is necessary instead to tackle structure determination using powder X-ray diffraction. This article highlights recent developments in the opportunities for determining crystal structures directly from powder diffraction data, focusing on the case of molecular solids and giving particular attention to the most challenging stage of the structure determination process, namely the structure solution stage. In particular, the direct-space strategy for structure solution is highlighted, as this approach has opened up new opportunities for the structure determination of molecular solids. The article gives an overview of the current state-of-the-art in structure determination of molecular solids from powder diffraction data. Relevant fundamental aspects of the techniques in this field are described, and examples are given to highlight the application of these techniques to determine crystal structures of molecular materials.     

One‐Step Synthesis of Metal@Titania Core–Shell Materials for Visible‐Light Photocatalysis and Catalytic Reduction Reaction

Metal@TiO₂ composites with a core–shell structure possess multifunctional properties. The demonstrated protocols for synthesizing such materials involve multiple steps, requiring precise control over the particle uniformity of the core and shell thickness, as well as complex surface modification. A simple approach to synthesizing metal@TiO₂ hybrid nanostructures remains a great challenge. Herein, we report on a one‐step method for the preparation of metal@TiO₂ core–shell nanospheres, which exhibited excellent performance in photocatalytic degradation of recalcitrant organic pollutants under visible light irradiation, and in catalytic reduction of nitrophenol in water. The simple method described here represents a sustainable approach to preparing core–shell materials at low cost, involving fewer chemicals, and requiring less energy, which will make a significant contribution toward large‐scale synthesis of high‐performance hybrid materials for photocatalytic applications.     

High Performance Dynamic X-ray Flexible Imaging Realized Using a Copper Iodide Cluster-Based MOF Microcrystal Scintillator

X-ray imaging technology has achieved important applications in many fields and has attracted extensive attentions. Dynamic X-ray flexible imaging for the real-time observation of the internal structure of complex materials is the most challenging type of X-ray imaging technology, which requires high-performance X-ray scintillators with high X-ray excited luminescence (XEL) efficiency as well as excellent processibility and stability. Here, a macrocyclic bridging ligand with aggregation-induced emission (AIE) feature was introduced for constructing a copper iodide cluster-based metal–organic framework (MOF) scintillator. This strategy endows the scintillator with high XEL efficiency and excellent chemical stability. Moreover, a regular rod-like microcrystal was prepared through the addition of polyvinyl pyrrolidone during the in situ synthesis process, which further enhanced the XEL and processibility of the scintillator. The microcrystal was used for the preparation of a scintillator screen with excellent flexibility and stability, which can be used for high-performance X-ray imaging in extremely humid environments. Furthermore, dynamic X-ray flexible imaging was realized for the first time. The internal structure of flexible objects was observed in real time with an ultrahigh resolution of 20 LP mm⁻¹.     

处理方法对多壁碳纳米管结构及负载Ru催化剂氨分解反应活性的影响

分别用H2O2、强碱（NaOH、KOH）和HNO3处理CNTs。以处理后的CNTs为载体、通过浸渍RuCl3水溶液结合高温H2还原制备Ru/CNTs催化剂,并将其应用在氨分解催化反应中。利用XRD、TPR、TPD-MS表征手段研究了Ru在CNTs表面的分散、还原性能及CNTs表面化学基团,探究催化剂结构-性能间构效关系。结果表明,强碱及双氧水处理CNTs,为其表面引入了数量适宜的羧基、酸酐、酚等官能团,而传统硝酸处理则引入了大量的羧基、酸酐、酯、内酯、酚、醌和羰基等官能团,对CNTs本征结构性质影响很大。经强碱及双氧水处理CNTs上负载Ru后所得催化剂的效果明显优于传统硝酸处理CNTs上负载Ru催化剂。本研究为CNTs的新型处理方法、表面化学官能团分析、提高Ru/CNTs催化分解氨活性提供了新的思路。