Fluorescence and electrochemiluminescence of luminol-reduced gold nanoparticles: photostability and platform effect

Water-soluble gold nanoparticles (AuNPs) capped with both fluorescent (FL) 3-aminophthalate (APA) and electrochemiluminescent (ECL) luminol molecules were described in our previous work. The synthetic and characteristic efforts of these functionalized AuNPs (lumAuNPs) were subsequently followed by investigations of their FL and ECL properties, as reported in the present work. It was observed that the FL intensity of a single gold nanoparticle was 70 times brighter than that of one free APA molecule, even though 91% of the FL emission of APA molecules on the surfaces of AuNPs was inhibited by gold cores through both intra- and interparticle quenching effects. Moreover, the photobleaching of surface-bound APA molecules was found to be dramatically inhibited compared with that of free ones in carbonate buffer. The improvement of photostability was attributed to the reactive AuNPs which acted as radical scavengers to protect the surface-bound APA molecules from oxidation by carbonate radicals. Furthermore, as-prepared lumAuNPs could react with cysteine to produce strong electrochemiluminescence, which was enhanced by 20-fold compared with that in the absence of cysteine. The experimental results suggested that luminol and cysteine were coadsorbed on the gold nanoparticle platform via Au-N and Au-S interactions, respectively. The shorter distance between reactant molecules by overcoming the electrostatic repulsion, that is, platform effect, was proposed to be responsible for the ECL enhancement. Combined with the biocompatibility of gold cores, the brighter FL emission, enhanced photostability, and stronger ECL intensity may make as-prepared lumAuNPs promising FL and ECL biomarkers for their applications in biosensors and bioimaging.     

Model catalysts of supported Au nanoparticles and mass-selected clusters

In surface science, much effort has gone into obtaining a deeper understanding of the size-selectivity of nanocatalysts. In this article, electronic and chemical properties of various model catalysts consisting of Au are reported. Au supported by oxide surfaces becomes inert towards chemisorption and oxidation as the particle size became smaller than a critical size (2-3 nm). The inertness of these small Au nanoparticles is due to the electron-deficient nature of smaller Au nanoparticles, which is a result of metal-substrate charge transfer. Properties of Au clusters smaller than ～20 atoms were shown to be non-scalable, i.e., every atom can drastically change the chemical properties of the clusters. Moreover, clusters with the same size can show dissimilar properties on various substrates. These recent endeavours show that the activity of a catalyst can be tuned by varying the substrate or by varying the cluster size on an atom-by-atom basis.     

Synthesis, characterization, and electrochemiluminescence of luminol-reduced gold nanoparticles and their application in a hydrogen peroxide sensor

It was found that chloroauric acid (HAuCl(4)) could be directly reduced by the luminescent reagent luminol in aqueous solution to form gold nanoparticles (AuNPs), the size of which depended on the amount of luminol. The morphology and surface state of as-prepared AuNPs were characterized by transmission electron microscopy, UV/visible spectroscopy, X-ray photoelectron spectroscopy, FTIR spectroscopy, and thermogravimetric analysis. All results indicated that residual luminol and its oxidation product 3-aminophthalate coexisted on the surface of AuNPs through the weak covalent interaction between gold and nitrogen atoms in their amino groups. Subsequently, a luminol-capped AuNP-modified electrode was fabricated by the immobilization of AuNPs on a gold electrode by virtue of cysteine molecules and then immersion in a luminol solution. The modified electrode was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy. The as-prepared modified electrode exhibited an electrochemiluminescence (ECL) response in alkaline aqueous solution under a double-step potential. H2O2 was found to enhance the ECL. On this basis, an ECL sensor for the detection of H2O2 was developed. The method is simple, fast, and reagent free. It is applicable to the determination of H2O2 in the range of 3x10(-7)-1x10(-3) mol L(-1) with a detection limit of 1x10(-7) mol L(-1) (S/N=3).     

Capillary electrophoresis with gold nanoparticles enhanced electrochemiluminescence for the detection of roxithromycin

Tris(2,2'-bipyridyl) ruthenium(II) (Ru(bpy)(3)(2+))-roxithromycin based electrochemiluminescence (ECL) was enhanced greatly by gold nanoparticles 10 nm in diameter. Capillary electrophoresis (CE) was coupled with the resultant ECL system as a detector for roxithromycin. This ECL emission is explained by the coreactant mechanism where roxithromycin behaves as a coreactant to generate strong reducing species and gold nanoparticles act as "floating nanoelectrodes". The reaction of Ru(bpy)(3)(3+) with the generated strong reducing species on the Pt working electrode as well as on "floating nanoelectrodes" releases Ru(bpy)(3)(2+*), resulting in enhancement of ECL emission. The selectivity of this detection system towards roxithromycin was examined by CE. Under the optimized conditions, the intensity of ECL emission varies linearly with the concentration of roxithromycin from 24 nM to 0.24 mM. The detection limit is 8.4 nM, while without adding gold nanoparticles it is only 84 nM. The detection of roxithromycin in pharmaceutical and urine samples was also performed by the proposed CE-ECL method.     

Ultrasensitive DNA detection based on Au nanoparticles and isothermal circular double-assisted electrochemiluminescence signal amplification

We report here an ultrasensitive DNA detection approach which combines Au NPs enhanced electrochemiluminescence (ECL) of the CdS nanocrystal (NC) film with isothermal circular amplification reaction of polymerase and nicking endonuclease (NEase). By the double-signal amplification, this approach could sensitively respond down to 5 aM DNA.     

The structure of gold nanoparticles and Au based thiol self-organized monolayers

Spatial and electronic structure of gold nanoparticles (AuNPs) and AuNPs with thiol base self-assambled monolayers (SAMs) are reviewed. Theoretical and experimental data on the symmetry, bond lengths, band gaps and binding energies are presented. Coordination of sulfur and its compounds to Au structures and AuS bond length emphasized especially. The works on synthesis of thiol based SAMs on AuNPs are reviewed. The applications of EXAFS and photoelectron spectroscopy for the investigated SAMs on AuNPs are considered.     

Surface-functionalized silica-coated gold nanoparticles and their bioapplications

Monodisperse Au at SiO₂ nanoparticles has been functionalized with carboxylic groups for further bioconjugation with amino-terminated oligonucleotides. The oligonucleotide-modified Au at SiO₂ nanoprobes have been applied in the fast colorimetric DNA based on the sequence-specific hybridization properties of DNA. Self-assembling behavior of Au at SiO₂ nanoparticles was also investigated.     

Incorporation of surface-derivatized gold nanoparticles into electrochemically generated polymer films

Stable colloidal solutions of gold nanoparticles surface-derivatized with a thiol monolayer have been prepared using two-phase (water–nitrobenzene) reduction of AuCl₄⁻ by sodium borohydride in the presence of 2-mercapto-3-n-octylthiophene (MOT). This kind of surface-functionalized gold nanoparticles can be easily incorporated into the poly(3-octylthiophene) (POT) films on electrode in the process of electrochemical polymerization leading to POT–gold nanoparticle (POT–Au) composite films. Scanning probe microscopy (SPM) and X-ray photoelectric spectroscopy (XPS) have been employed to characterize the surface-derivatized particles and the resulting films. The method of incorporation of nanoparticles into polymer by surface-derivatization and in situ polymerization can also be employed to prepare many other polymer–nanoparticle compostie materials.     

A new route to obtain shape-controlled gold nanoparticles from Au(III)-beta-diketonates

Ligands with a beta-diketone skeleton have been employed for the first time as reductant to produce ligand stabilized gold nanoparticles of different shapes from aqueous HAuCl(4) solution. Evolution of stable gold nanoparticles follows first order (k approximately equal to 10(-2) min(-1)) kinetics with respect to Au(0) concentration. Growth of particles of different shapes (spherical or triangular or hexagonal) goes hand in hand under the influence of different beta-diketones, which have excellent capping and reducing properties. Chlorine insertion was observed to take place in the beta-diketone skeleton.     

Bidimensionality of 8-atom clusters of Au: first principles study and comparison with Ag clusters

We have calculated the lowest energy structures of 8-atom neutral gold clusters using the density functional theory approach. In contrast with current literature that finds kinetic energy to be the determinant component, we have found that the 2D structure is energetically favored due to a higher electron delocalization that stems from the relativistic contraction of Au atom size which cause 3D clusters to deform. This higher delocalization lowers the total energy of the 2D structures against the 3D ones. Silver clusters do not suffer this size contraction, hence there is no higher delocalization in the 2D clusters, and their fundamental structure will be 3D.     

Interlocked catenane-like structure predicted in Au24(SR)20: implication to structural evolution of thiolated gold clusters from homoleptic gold(I) thiolates to core-stacked nanoparticles

Atomic structure of a recently synthesized ligand-covered cluster Au(24)(SR)(20) [J. Phys. Chem. Lett., 2010, 1, 1003] is resolved based on the developed classical force-field based divide-and-protect approach. The computed UV-vis absorption spectrum and powder X-ray diffraction (XRD) curve for the lowest-energy isomer are in good agreement with experimental measurements. Unique catenane-like staple motifs are predicted for the first time in core-stacked thiolate-group (RS-) covered gold nanoparticles (RS-AuNPs), suggesting the onset of structural transformation in RS-AuNPs at relatively low Au/SR ratio. Since the lowest-energy structure of Au(24)(SR)(20) entails interlocked Au(5)(SR)(4) and Au(7)(SR)(6) oligomers, it supports a recently proposed growth model of RS-AuNPs [J. Phys. Chem. Lett., 2011, 2, 990], that is, Au(n)(SR)(n-1) oligomers are formed during the initial growth of RS-AuNPs. By comparing the Au-core structure of Au(24)(SR)(20) with other structurally resolved RS-AuNPs, we conclude that the tetrahedral Au(4) motif is a prevalent structural unit for small-sized RS-AuNPs with relatively low Au/SR ratio. The structural prediction of Au(24)(SR)(20) offers additional insights into the structural evolution of thiolated gold clusters from homoleptic gold(I) thiolate to core-stacked RS-AuNPs. Specifically, with the increase of interfacial bond length of Au(core)-S in RS-AuNPs, increasingly larger "metallic" Au-core is formed, which results in smaller HOMO-LUMO (or optical) gap. Calculations of electronic structures and UV-vis absorption spectra of Au(24)(SR)(20) and larger RS-AuNPs (up to ~2 nm in size) show that the ligand layer can strongly affect optical absorption behavior of RS-AuNPs.     

Acridinedione-functionalized gold nanoparticles and model for the binding of 1,3-dithiol linked acridinedione on gold clusters

The design and synthesis of 1,3-dithiol linked acridinedione functionalized gold nanoparticles (ADDDT-GNP) is described. ADDDT-GNP was characterized by transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), UV-vis, steady-state and time-resolved fluorescence techniques. Conformational analysis of 1,3-dithiol ligands using density functional theory (DFT) reveals that they can cap on gold clusters through 1,2-capping mode, in which the two sulfur atoms of the dithiol bind covalently with two adjacent gold atoms on the surface of the cluster. The present study shows that three conformers of the ligand can cap in the 1,2-mode of capping. The triexponential fluorescence decay observed in the capped nanogold complex with fluorophore-labeled 1,3-dithiol may originate from the three conformers of the complex in the 1,2-capping mode.     

Chemisorption-induced spin symmetry breaking in gold clusters and the onset of paramagnetism in capped gold nanoparticles

We present a simple model to describe the induction of magnetic behavior on gold clusters upon chemisorption of one organic molecule with different chemical linkers. In particular, we address the problem of stability of the lowest lying singlet and show that for some linkers there exists a spin symmetry-breaking that lowers the energy and leads to preferential spin density localization on the gold atoms neighboring the chemisorption site. The model is basically an adaptation of the Stoner model for itinerant electron ferromagnetism to finite clusters and it may have important implications for our understanding of surface magnetism in larger nanosystems and its relevance to electronic transport in electrode-molecule interfaces.     

Anodic electrochemiluminescence of CdSe nanoparticles coreacted with tertiary amine and halide induced quenching effect

The novel anodic electrochemiluminescence (ECL) behaviors of the CdSe nanoparticles coreacted with tertiary amine were observed. The ECL intensity peak located near +1.2 V, accompanied with a shoulder above +1.5 V. The ECL emission peak estimated at about 580 nm was almost identical with that of the photoluminescence (PL), indicating the passivation of the surfaces of the nanoparticles. The dependence of the ECL on system pH and the concentration of the coreactants were also discussed. The halide ions could quench ECL, with the effective order I^? > Br^? > Cl^?. Based on these results the possible ECL processes were proposed.     

Synthesis and characterization of Au core-Au-Ag shell nanoparticles from gold seeds: impacts of glycine concentration and pH

This paper describes the preparation of Au core-Au-Ag shell nanoparticles (NPs) in different morphologies by controlling both the pH and the glycine concentration. Using a seed-growth method, we prepared high-quality Au core-Au-Ag shell NPs from a glycine solution under alkaline conditions (pH>8.5). By controlling both the pH and the glycine concentration, we prepared dumbbell-shaped and peanut-shaped Au core-Au-Ag shell NPs readily by depositing gold and silver, reduced by ascorbate, onto the gold nanorods. We have found that the glycine concentration that is optimal for preparing high-quality Au core-Au-Ag shell NPs differs at the various values of pH. At pH<8.5, the glycine concentration is not important, but, when preparing dumbbell- and peanut-shaped Au core-Au-Ag shell NPs, it should be greater than 50 mM and greater than 20 mM at pH 9.5 and 10.5, respectively. Glycine plays a number of roles during the synthesis of the Au core-Au-Ag shell NPs by controlling the solution pH, altering the reduction potentials of gold and silver ions through forming complexes with metal ions (Au(+) and Ag(+)), minimizing the formation of Ag(2)O, AgCl, and AgBr precipitates, and stabilizing the thus-prepared NPs. At pH 9.7, we observed the changes in the morphologies of the Au core-Au-Ag shell NPs-from regular (rectangular) to peanut- and dumbbell-shaped, and finally to jewel-, diamond-, and/or sphere-shaped-that occurred during the course of a 60-min reaction. In addition, we were able to affect the shapes and sizes of the Au core-Au-Ag shell NPs by controlling the reaction time.     

Ultrasensitive electrochemiluminescence immunosensor using PtAg@carbon nanocrystals composites as labels and carbon nanotubes-chitosan/gold nanoparticles as enhancer

An ultrasensitive electrochemiluminescence (ECL) immunosensor was developed using PtAg@carbon nanocrystals (CNCs) as excellent labels based on carbon nanotubes-chitosan/AuNPs (CNT-CHIT/AuNPs) composite modified screen-printed carbon electrodes (SPCEs) for prostate protein antigen (PSA) detection. The CNCs were obtained simply by electro-oxidation of graphite with abundant carboxyl groups at their surfaces. The PtAg bimetallic nanocomposites with hierarchically hollow structures were fabricated through simple replacement reaction using dealloyed nanoporous silver (NPS) as both a template and reducing agent. Structure characterization was obtained by means of transmission electron microscope (TEM) and scanning electron microscope (SEM) images. The PtAg@CNCs composites exhibit a 6 times higher ECL intensity than the pure CNCs labeled anti-PSA. The as-prepared CNT-CHIT/AuNPs composite can attach more antibody than pure CNTs. Due to the dual-amplification techniques, the concentrations of PSA were obtained in the range from 1 pg mL(-1) to 50 ng mL(-1) with a detection limit of 0.6 pg mL(-1). Finally, the as-proposed ECL immunosensor has the advantages of high sensitivity, specificity and stability and could become a promising technique for tumor marker detection.