Corrosion inhibition and adsorption behavior of imidazoline salt on N80 carbon steel in CO2-saturated solutions and its synergism with thiourea

The inhibition and adsorption behavior of 2-undecyl-1-sodium ethanoate-imidazoline salt (2M2) and thiourea (TU) on N80 mild steel in CO₂-saturated 3 wt.% NaCl solutions was studied at 25?°C, pH 4, and 1 bar CO₂ partial pressure using electrochemical methods. It was found that inhibition efficiency (η%) increased with increase in 2M2 concentration but decreased with increase in TU concentration with optimum η% value at 20 mg l^?1 TU. The data suggest that the compounds functioned via a mixed-inhibitor mechanism. The inhibition process is attributed to the formation of an adsorbed film of 2M2 and TU via the inhibitors polycentric adsorption sites on the metal surface which protects the metal against corrosion. A synergistic effect was observed between TU and 2M2. Potential of unpolarizability, E _u, was observed in the presence of 100 mg l^?1 TU which was shifted positively in the presence of 2M2–100 mg l^–1 TU blends, which suggests that the presence of 2M2 stabilized the adsorption of TU molecules on the surface of the metal. The adsorption characteristics of 2M2 were approximated by Langmuir adsorption isotherm.     

Influence of pyridazine derivative on corrosion inhibition of mild steel in acidic media

The inhibition behavior of 6-methyl-4,5-dihydropyridazin-3(2H)-one (MDP) on corrosion of mild steel in 1 M HCl and 0.5 M H₂SO₄ was investigated using weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) measurements. The results indicated that the corrosion inhibition efficiency depends on concentration, immersion time, solution temperature, and the nature of the acidic solutions. It is also noted that MDP is at its the most efficient in 1 M HCl and least in 0.5 M H₂SO₄. The effect is more pronounced with MDP concentration. It is found that the inhibition efficiency attains 98 % at 5 × 10^?3 M in 1 M HCl and 75 % at 5 × 10^?2 in 0.5 M H₂SO₄. Polarization measurements showed that the MDP acts as a mixed inhibitor. EIS diagrams showed that the adsorption of MDP increases the transfer resistance and decreases the capacitance of the interface metal/solution. From the temperature studies, the activation energies in the presence of MDP were found to be superior to those in uninhibited medium. Finally, a mechanism for the adsorption of MDP was proposed and discussed.     

Electrochemical investigation of a schiff base synthesized by cinnamaldehyde as corrosion inhibitor on mild steel in acidic medium

The inhibiting effect of (NE)-4-phenoxy-N-(3-phenylallylidene) aniline (PAC) on the corrosion of mild steel in 1.0 M HCl has been studied by electrochemical impedance spectroscopy, and Tafel polarization measurements. The corrosion rate was also calculated theoretically in terms of mm per year and mil per year, using current density values of mild steel in 1.0 M HCl medium. It was found that PAC has a remarkable inhibition efficiency on the corrosion of mild steel especially at high temperatures. The values of E _a obtained in presence of a Schiff base were found to be lower than those obtained in the inhibitor-free solution. The increase of inhibition efficiency percent with temperature increase was associated with the transformation of physical adsorption into chemical adsorption. The thermodynamic functions of adsorption processes have been evaluated and discussed at each temperature. Scanning electron microscope observations of the electrode surface confirmed the existence of a protective adsorbed film of the inhibitor on the electrode surface.     

Hydroclathrus clathratus marine alga as a green inhibitor of acid corrosion of mild steel

The corrosion inhibitive and adsorption behaviors of Hydroclathrus clathratus on mild steel in 1 M HCl and 1 M H₂SO₄ solutions at 303, 313 and 323 K were investigated by weight loss, electrochemical, and surface analysis techniques. The results show that H. clathratus acts as an inhibitor of corrosion of mild steel in acid media. The inhibition efficiency was found to increase with increase in inhibitor concentration but to decrease with rise in temperature, suggestive of physical adsorption. The adsorption of the inhibitor onto the mild steel surface was found to follow the Temkin adsorption isotherm. The inhibition mechanism was further corroborated by the results obtained from electrochemical methods. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses supported the inhibitive action of the alga against acid corrosion of mild steel.     

Evaluation of the inhibitive effect of essential oil of Lavandula multifida L., on the corrosion behavior of C38 steel in 0.5 M H2SO4 medium

The essential oil of the aerial parts of Lavandula multifida L., collected in Errachidia region (three samples) in southeast Morocco, was extracted by hydrodistillation and analyzed by GC and GC-MS. The oil was predominated by carvacrol (57.9–59.0%). L. multifida oil was tested as corrosion inhibitor of C38 steel in 0.5 M H₂SO₄ using weight loss measurements, electrochemical polarization, and EIS methods. The results obtained by measurements of weight loss showed that inhibition efficiency increases with inhibitor concentration to attain 72.2% at 2 g/l of oil at 298 K. Polarization curves revealed that L. multifida oil acts as mixed type inhibitor. The temperature effect on the corrosion behavior of steel in 0.5 M H₂SO₄ without and with the inhibitor at 2 g/l was studied in the temperature range from 303 and 343 K. The adsorption of inhibitor on the C38 steel surface was found to be a spontaneous process and to obey Langmuir’s adsorption isotherm. The associated activation energy has been determined.     

Adsorption and desorption behavior of tetravalent zirconium onto a silica-based macroporous TODGA adsorbent in HNO3 solution

To understand the separation behavior of Zr(IV) in the partitioning process for high level liquid waste, a silica-based macroporous adsorbent (TODGA/SiO₂-P) was prepared by impregnating N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide (TODGA) into a macroporous silica/polymer composite particles support (SiO₂-P). Adsorption and desorption behavior of Zr(IV) from nitric acid solution onto silica-based TODGA/SiO₂-P adsorbent were investigated by batch experiment. It was found that TODGA/SiO₂-P showed strong adsorption affinity to Zr(IV) and this adsorption process reached equilibrium state around 6 h at 298 K. Meanwhile, HNO₃ concentration had no significant effect on the adsorption of Zr(IV) above 1 M. From calculated thermodynamic parameters, this adsorption process could occur spontaneously at the given temperature and was confirmed to be an exothermic reaction. This adsorption process could be expressed by Langmuir monomolecular layer adsorption mode and the maximum adsorption capacity were determined to be 0.283 and 0.512 mmol/g for Zr(IV) at 298 and 323 K, respectively. In addition, more than 90 % of Zr(IV) adsorbed onto adsorbent could be desorbed with 0.01 M diethylenetriamine pentaacetic acid solution within 24 h at 298 K.     

Corrosion inhibition and adsorption properties of Azadirachta indica mature leaves extract as green inhibitor for mild steel in HNO3

Abstract

The corrosion inhibition and adsorption properties of Neem (Azadirachta indica – AZI) mature leaves extract as a green inhibitor of mild steel (MS) corrosion in nitric acid (HNO₃) solutions have been studied using a gravimetric technique for experiments conducted at 30 and 60°C. The results disclose that the different concentrations of the AZI extract inhibit MS corrosion and that inhibition efficiency of the extract varies with concentration and temperature. For extract concentrations studied and ranging from 9.09 to 28.57 mg/L, the maximum inhibition efficiency was 80.5 and 80.07% both at 28.57 mg/L AZI at 30 and 60°C, respectively, in 2.0 N HNO₃. The adsorption of the inhibitor on the MS surface was exothermic and consistent with the physical adsorption mechanism, best described by the Frumkin adsorption isotherm.     

Corrosion inhibition of mild steel in acidic medium by butyl alcohol

The corrosive behavior of mild steel in 1 M H₂SO₄ solutions contaminated with 3.5 % recrystallized sodium chloride at specific concentrations of butyl alcohol was investigated using potentiodynamic polarization and weight loss technique. The results obtained showed butyl alcohol to be an efficient inhibitor in the acid environment with general decrease in corrosion rate as the concentration of the alcohol increases. The adsorption of the inhibitor on the mild steel obeys the Langmuir adsorption isotherm. The thermodynamic parameters of adsorption deduced reveal a mixed interaction with the steel surface and spontaneous adsorption of butyl alcohol.     

Insights into the inhibition mechanism of a novel supramolecular complex towards the corrosion of mild steel in the condensate water: experimental and theoretical studies

A supramolecular complex (HPDA) based on (2-hydroxypropyl)-β-cyclodextrin (HP-β-CD) and octadecylamine (ODA) exhibited a favourable inhibiting effect on the corrosion of mild steel (MS) in the condensate water. The structural properties of HPDA, including the apparent association constant (κ) and the optimal spatial configuration, were clarified using phase solubility simulation and molecular mechanics calculations. The results indicated that HPDA was fairly stable in water with a κ value of 9199 mol^?1, and its four possible configurations might coexist. The corrosion inhibition effect of HPDA was collectively evaluated by both experimental and theoretical methods. Weight loss measurements showed that the inhibition efficiency of HPDA depended on the concentration and temperature, and the maximum value could reach 92.6% with 50 mg L^?1 concentration at 313 K. The potentiodynamic polarization tests showed that HPDA was a mixed type inhibitor with a predominantly anodic type. Also, the polarization resistance was effectively enhanced in the presence of HPDA according to the results of electrochemical impedance spectroscopy. Adsorption experiments revealed that HPDA inhibited the corrosion of MS by a chemisorption mechanism, which was well described by the Langmuir model. Surface analyses based on X-ray photoelectron spectroscopy and Auger electron spectroscopy disclosed that the chemisorption of HPDA on the MS surface resulted from the self-assembly of guest molecules (ODA) with a tilted orientation. In addition, an apparent connection was ascertained between the adsorption measurements and the theoretical parameters (Mulliken charges and molecular electrostatic potential plot) using quantum chemical calculations.     

Anticorrosive property of Spiraea Cantoniensisis extract as an eco-friendly inhibitor on mild steel surface in acid medium

Abstract

The inhibitive performance of methanolic extract of eco-friendly green inhibitor Spiraea cantoniensis (S. cantoniensis) on inhibiting corrosion of mild steel (MS) in 1?M HCl was studied by weight loss, AC-impedance, Fourier transform infrared spectroscopy (FT-IR), Raman, x-ray diffraction (XRD), ultraviolet-visible (UV-Vis), atomic absorption spectroscopy (AAS), and scanning electron microscopy (SEM) analysis. The results showed that the corrosion rate significantly decreased in the presence of the S. cantoniensis inhibitor with a gradual increase in inhibition efficiency at an increased inhibitor concentration. The temperature studies were conducted which included activation energy (E_a), change in enthalpy (ΔH°_ads), change in entropy (ΔS°_ads), change in free energy (ΔG°_ads) and heat of adsorption (Q_ads). These calculations were helpful to determine the reaction mechanism and proved it as a physisorption type following the Langmuir adsorption isotherm. The analysis of the protective film using FT-IR, Raman, XRD, and SEM analysis clearly showed the potentiality of S. cantoniensis in blocking the MS surface to prevent corrosion by 1?M HCl. The solution analysis via AAS and UV-Vis showed the inhibitive effect of the inhibitor (S. cantoniensis) in both inhibitive and the uninhibitive solution exhibiting the adsorption of the phytochemical molecules on the MS surface.     

Surface morphological and impedance spectroscopic studies on the interaction of polyethylene glycol (PEG) and polyvinyl pyrrolidone (PVP) with mild steel in acid solutions

The inhibition of mild steel corrosion in aerated acid mixture of 0.5 N H₂SO₄ and 0.5 N HCl solution was investigated using potentiodynamic polarization studies, linear polarization studies, electrochemical impedance spectroscopy, adsorption, and surface morphological studies. The effect of inhibitor concentration on corrosion rate, degree of surface coverage, adsorption kinetics, and surface morphology is investigated. The inhibition efficiency increased markedly with increase in additive concentration. The presence of PEG and PVP decreases the double-layer capacitance and increases the charge-transfer resistance. The inhibitor molecules first adsorb on the metal surface following a Langmuir adsorption isotherm. Both PEG and PVP offer good inhibition properties for mild steel and act as mixed-type inhibitors. Surface analysis by scanning electron microscopy (SEM) and atomic force microscopy (AFM) shows that PVP offers better protection than PEG.     

Inhibition Effect of N-(Pyridin-2-yl-Carbamothioyl) Benzamide on the Corrosion of C-Steel in Sulfuric Acid Solutions

N-(Pyridin-2-yl-carbamothioyl)benzamide (PCMB) was newly synthesized and tested as a corrosion inhibitor for C-steel in 0.5 M H₂SO₄ using chemical and electrochemical techniques. Polarization measurements showed that the synthesized compound acted as a mixed inhibitor. The inhibition efficiencies obtained from the different methods were in good agreement. The inhibitive action of this compound is discussed in terms of blocking the electrode surface by adsorption of the inhibitor according to the Langmuir isotherm. The effect of temperature on the corrosion behavior in the absence and presence of 2.5 × 10^?5 M of PCMB was studied (283–308 K). The associated activation energies (E _a) and the thermodynamic parameters (ΔH*, ΔS*, K _ads, ΔG°_ads) for the adsorption process were determined. The ΔG°_ads value is ?36.55 kJ/mol, which indicated that the adsorption mechanism of PCMB on C-steel in 0.5 M H₂SO₄ solution was combined between physisorption and chemisorption processes.     

Glutathione as green corrosion inhibitor for 6061Al-SiC(p) composite in HCl medium: electrochemical and theoretical investigation

This research deals with the inhibition activity of glutathione in 0.5 M HCl on the corrosion behavior of 6061Al-SiC_(p) composite. Glutathione is an eco-friendly water-soluble inhibitor. Polarization results reveal the cathodic inhibitor behavior of glutathione (Gt). The inhibition performance of Gt increases by increasing its concentration and lowering the medium temperature. The decrease in the corrosion current density and increase in inhibition efficiency on increasing Gt concentration reveal the attenuation of composite corrosion. Experimental results indicate the mixed adsorption with predominantly physisorption of Gt molecules adsorption on the composite surface following Langmuir adsorption isotherm. The impedance measurements indicate the rise in polarization resistance with an increase in Gt concentration, showing the control of composite corrosion. The surface analysis of the corroded and inhibited composite samples using a scanning electron microscope and atomic force microscope supports Gt molecules’ adsorption. The quantum chemical calculations confirm the conclusions of the experimental studies.

     

Mono- and Di-valent Salts as Modifiers of PEO-PPO-PEO Block Copolymer Interactions with Silica Nanoparticles in Aqueous Dispersions

Colloidal stabilization of nanoparticle dispersions is central to applications including coatings, mineral extraction, and dispersion of oil spills in oceanic environments, which often involves oil-mineral-aggregates (OMAs). We have an ongoing interest in the modulation of amphiphile micellization and adsorption behavior in aqueous colloidal dispersions in the presence of various additives. Here we evaluate the effect of added salts CaCl₂, MgCl₂, and NaCl on the micellization and adsorption behavior of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer Pluronic P105 (EO₃₇PO₅₆EO₃₇). In 0.10 wt% silica nanoparticle (10.6 nm average diameter) dispersion, adsorbed block copolymer layer formation begins at a critical surface micelle concentration (csmc) of 0.02 wt%, well below the critical micellization concentration of Pluronic P105 in water. Dye solubilization experiments demonstrate an increase in the csmc upon addition of each salt. Each added salt reaches a level of maximum effectiveness in its ability to disfavor Pluronic P105 adsorption at the silica surface. These peak levels occur at concentrations of 0.005, 0.03, and 0.05 M for CaCl₂, MgCl₂, and NaCl, respectively, in the presence of 0.10 wt% silica nanoparticles. We explain these results in the context of an electrostatic displacer mechanism and discuss possible connections to OMA-dispersant formation.     

Study on the Inhibition of Mild Steel Corrosion by Cationic Gemini Surfactant in 1 M HCl

The cationic gemini surfactant 1,2-bis(N-tetradecyl-N,N-dimethylammonium)ethane dibromide (14-2-14) was synthesized using a previously described method. The surfactant was characterized using ¹H NMR. The corrosion inhibition effect of 14-2-14 on mild steel in 1 M HCl at temperatures 30–60°C was studied using weight loss measurements, potentiodynamic polarization measurements and electrochemical impedance spectroscopy. Morphology of the corroded mild steel specimens was examined using scanning electron microscopy (SEM). The results of the studies show that gemini surfactant is an efficient inhibitor for mild steel corrosion in 1 M HCl; the maximum inhibition efficiency (IE) of 98.06% is observed at surfactant concentration of 100 ppm at 60°C. The %IE increases with the increasing inhibitor concentration and temperature. The adsorption of inhibitor on the mild steel surface obeys Langmuir adsorption isotherm. SEM studies confirmed smoother surface for inhibited mild steel specimen.     

Adsorption and inhibitive properties of aminobiphenyl and its Schiff base on mild steel corrosion in 0.5 M HCl medium

Electrochemical measurements were performed to investigate the effectiveness and adsorption behaviour of aminobiphenyl (Aph) and 2-(3-hydroxybenzylideneamino)biphenyl (Aph-S), as corrosion inhibitors for mild steel (MS) in 0.5 M HCl solution. Potentiodynamic polarization, linear polarization resistance (LP) and electrochemical impedance spectroscopy (EIS) techniques were applied to study the metal corrosion behaviour in the absence and presence of different concentrations of Aph and Aph-S. In order to gain more information about adsorption mechanism the AC impedance technique was used to evaluate the potential of zero charge (PZC) from polarization resistance (R_p) versus voltage (E) plot. Potentiodynamic polarization measurements showed that Aph act as cathodic type inhibitor where as Aph-S act mixed type. The inhibition efficiency (IE%) increases with increasing concentration of compounds and reached 92.6% for Aph and 97.2% for Aph-S at 5 × 10⁻³ M. Double layer capacitance (C_dl) and polarization resistance (R_p) values are derived from Nyquist plots obtained from AC impedance studies. The experimental data fit Langmuir isotherm for both Aph and Aph-S, and from the adsorption isotherm some thermodynamic data for the adsorption processes are calculated and discussed. The effect of exposure time on the corrosion behaviour of mild steel in the absence and presence of inhibitor over 168 h was also studied.     

Experimental and theoretical investigation of adsorption and inhibition properties of 2-Amino-1,3,5-triazine-4,6-dithiol against corrosion in hydrochloric acid solution on mild steel

In this work, 2-Amino-1,3,5-triazine-4,6-dithiol (2-ATD) as novel and high efficiency corrosion inhibitor has been investigated for mild steel (MS) corrosion in 0.5 M HCl solution using electrochemical methods, scanning electron microscopy (SEM), energy disperse X-ray spectroscopy (EDX), atomic force microscopy (AFM) and quantum chemical calculation methods. Potentiodynamic polarization (PDP) curves indicate that 2-ATD is mixed type inhibitor, corrosion inhibition efficiency increased with increasing inhibitor concentration and reached its value of 96.5%. Evolution of exposure time versus corrosion behavior of 2-ATD is examined in corrosive medium. While corrosion potential (E_corr) shifted more negative values, polarization resistances (R_p) decreased after 120 h exposure time due to the corrosion process. H₂ volume is measured in uninhibited and inhibited solutions (10 mM 2-ATD) after 120 h exposure time. Very low volume (3.6 mL cm⁻²) of H₂ is obtained on MS electrode in inhibited solution after 120 h of exposure, indicating that 2-ATD covers the entire surface against aggressive attack and retards the both anodic dissolution of MS and cathodic hydrogen evolution reactions. The adsorption process proposal is the Langmuir isotherm which is most suitable. Adsorption and thermodynamic parameters show that 2-ATD has a strong adsorption effect onto MS surface and includes mixed adsorption style (physical and chemical). Corrosion current density increases with increasing temperature and high activation energy (Ea) proves the strong adsorption of 2-ATD on the MS surface. Anti-corrosion mechanism of 2-ATD is described more detail with the potential of zero charge method. SEM, EDX and AFM analysis support the obtained results of electrochemical methods and confirm the existence of protective layer and strong adsorption of 2-ATD on the MS surface. Chronoamperometry test shows that current densities are almost constant whole experiment in the presence of organic film. Finally, quantum chemical calculation method of 2-ATD in blank solution is performed to investigate the active sites for possible attachment with MS surface.     

Inhibitive assessment of 1-(7-methyl-5-morpholin-4-yl-thiazolo[4,5-d]pyrimidin-2-yl)-hydrazine as a corrosion inhibitor for mild steel in sulfuric acid solution

In this study, the inhibitive effect of synthesized 1-(7-methyl-5-morpholin-4-yl-thiazolo[4,5-d]pyrimidin-2-yl)-hydrazine (MMTPH) as a new corrosion inhibitor for mild steel in 0.5 M sulfuric acid medium is investigated employing potentiodynamic polarization, electrochemical impedance spectroscopy and linear polarization resistance techniques. The results show MMTPH reduces anodic dissolution, retards the hydrogen evolution reaction and its adsorption follows Langmuir’s adsorption isotherm. Any increase in temperature will in turn increase corrosion current densities; however, the presence of MMTPH hinders the rate. In solutions with inhibitor concentration of 200 ppm, temperature elevations as great as 30° (25–55 °C) result in a drop of about 45 % in inhibition efficiency (99–55 %). Thermodynamic adsorption parameters show that the MMTPH is absorbed by a spontaneous exothermic process and the adsorption mechanism is physical. Quantum chemical method shows that the MMTPH molecules can be directly adsorbed at the steel surface on the basis of donor–acceptor interactions between π-electrons of pyrimidine, N atoms of hydrazine and vacant d-orbitals of iron atoms.     

Corrosion inhibition of mild steel by highly stable polydentate schiff base derived from 1,3- propanediamine in aqueous acidic solution

Recently, the hydrolysis of Schiff bases under experimental conditions gives suspicion for their corrosion inhibition performance. The current study employs a stable Schiff base namely, 2,2′-{propane-1,3-diylbis[azanylylidene (E) methanylylidene]}bis(6-methoxyphenol) (LPD) as corrosion inhibitor for mild steel (MS) in 1 M HCl solution. The presence of the characteristic peak of the imine group in UV-visible spectra was taken as an indicator for LPD stability in acidic media. The inhibition action was examined using electrochemical techniques including potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) besides gravimetric measurement. The inhibition efficiency reached 95.93 % for 0.75 mM LPD after 24 h of immersion at 25 °C. This high efficiency is owing to the presence of the characteristic imine group and other heteroatoms and π- electrons of the aromatic benzene rings. The mechanism of inhibition depends on adsorption phenomena on mild steel surface which obeys Langmuir isotherm model. The calculated values of adsorption equilibrium constant (K_ads), adsorption free energy ΔG_ads, adsorption enthalpy ΔH_ads and adsorption entropy ΔS_ads indicated spontaneous exothermic adsorption process of both physical and chemical nature. By rising temperature, the inhibition efficiency of LPD was decreased. The calculated activation energy was increased as the concentration of LPD increased. LPD was considered as a mixed-type inhibitor as indicated from PDP measurements. The obtained surface morphology and composition analysis using SEM/EDS, AFM and FTIR techniques ensures the high efficiency of LPD as corrosion inhibitor.     

Effect of Avogadro natural oil on the corrosion inhibition of mild steel in hydrochloric acid solution

The inhibition action of Avogadro natural oil on corrosion of mild steel in one molar hydrochloric acid solution was investigated by gravimetric and potentiodynamic polarization techniques. The surface morphology of as-corroded samples was assessed with high resolution scanning transmission electron microscopy equipped with energy dispersive spectroscopy (HR-STEM/EDS). From the results, the presence of Avogadro natural oil in the metal–acidic interface decreased the corrosion rate with all the exposure times. The inhibition efficiency (%IE) increases with the concentration of the inhibitor considered. Results obtained from gravimetric measurements indicate that the natural oil exhibited higher efficiencies of 93.26 % after 384 h of exposure time and 98.26 % recorded in the potentiodynamic polarization method, both at 4.5 g/v inhibitor addition. Equally, results from the linear polarization indicated higher potential value with an increase in the polarization resistance (R _p) and lower current density for the inhibited samples than the uninhibited mild steel sample. The inhibitive effect of this oil was explained in view of adsorption on the metal surface. The adsorption process follows the Langmuir adsorption isotherm.