Enzymatic hydrolysis of mercerized and unmercerized sisal pulp

Enzymatic saccharification of sisal cellulosic pulp has been investigated. Brazil leads global production of lignocellulosic sisal fiber, which has high cellulose content, an important property for producing glucose via saccharification. Hence, sisal pulp can be a good alternative for use in biorefineries. Prior to enzymatic hydrolysis, the starting pulp [85 ± 2% α-cellulose, 15 ± 2% hemicelluloses, 1.2 ± 2% insoluble lignin, viscometric average molar mass (MMvis) 19,357 ± 590 g mol^?1, crystallinity index (CI) 74%] was pretreated with alkaline aqueous solution (mercerization, 20 g of pulp L^?1, 20% NaOH, 50 °C). The changes in the properties of the cellulosic pulp during this pretreatment were analyzed [α-cellulose content, MMvis, CI, pulp fiber dimensions, and scanning electron microscopy (SEM)]. The unmercerized and mercerized (97.4 ± 2% α-cellulose, 2.6 ± 2% hemicelluloses, 0.3 ± 0.1% insoluble lignin, MMvis 94,618 ± 300 g mol^?1, CI 68%) pulps were subjected to enzymatic hydrolysis (48 h, commercial cellulase enzymes, 0.5 mL g^?1 pulp); during the reactions, aliquots consisting of unreacted pulp and liquor were withdrawn from the medium at certain times and characterized (unreacted pulp: MMvis, CI, fiber dimensions, SEM; liquor: high-performance liquid chromatography). The changes in pulp properties observed during mercerization facilitated access of enzymes to cellulose chains, and the yield of the hydrolysis reaction increased from 50.2 (unmercerized pulp) to 89.0% (mercerized pulp). These initial results for enzymatic hydrolysis of sisal pulp indicate that it represents a good alternative biomass for bioethanol production.     

SO2–ethanol–water (SEW) fractionation process: production of dissolving pulp from spruce

SO₂–ethanol–water (SEW) fractionation process is a highly attractive platform for future lignocellulosic Biorefineries. Its governing advantages include high flexibility in the selection of the raw material, simple and efficient recovery of fractionation chemicals, absence of carbohydrate degradation (both cellulose and hemicelluloses), and high reaction rates. The process is suitable for production of various carbohydrate- and lignin-based products including papermaking pulp, glucose, bioalcohols and lignosulfonates. The present paper addresses the possibility of producing dissolving pulp from spruce using SEW fractionation followed by ECF bleaching with and without hot caustic extraction. Comprehensive characterisation of chemical and macromolecular properties of the SEW dissolving pulps was complemented by determining the quality of viscose. The comparison with conventional viscose-grade acid sulfite pulps revealed close proximity in all properties. Therefore, considering the advantages of SEW process, it is suggested as a possible replacement for acid sulfite process in dissolving pulp manufacturing.     

Purification of cellulosic pulp by hot water extraction

Hot water extraction (HWE) of pulp in a flow-through reactor was evaluated as a method to purify paper-grade pulps. About 50–80 % of the xylan and up to 50 % of the lignin in unbleached birch Kraft pulp was extracted by the HWE without losses in cellulose yield. The residual xylan content in the extracted pulps was predominantly too high for dissolving-grade applications, but some of the pulps with a xylan content of 5–7 % might still be suitable as rayon-grade pulps. Increasing extraction temperature lowered the xylan content at which cellulose yield started to decrease. Furthermore, at any given xylan content, increasing extraction temperature resulted in cellulosic pulp with higher degree of polymerization. The extracted xylan was recovered almost quantitatively as xylo-oligosaccharides. The results suggest that HWEs at elevated temperatures may be applied to purify cellulosic pulps, preferably containing a low xylan content, and to recover the extracted sugars.     

Catalyzed sulphite and semichemical pulping

Very high yield sulphite pulps were produced by cooking black spruce wafers in pulping liquors at pH 7 or 10, containing 0.1% (on O.D. wood) of soluble anthraquinone (SAQ). These pulps had better strength properties relative to controls prepared without SAQ, breaking length and burst index being greater, on average, by 20%. Other improvements included: increased pulping rate, lower lignin contents at comparable pulp yields, and higher carbohydrate content at the same level of residual lignin in pulp (this resulted in an increase of total pulp yield by 2%). Results of cooks in liquors ranging in pH from 4 to 10, and under variable conditions of time (20–60 min) and temperature (120–160°C) suggested that: firstly, AQ does not act as a pulping catalyst at pH 4, and secondly, the sulphonate contents of AQ-catalyzed pulps are lower than those of the uncatalyzed controls. In the light of the lower sulphonate content, the higher strength is unexpected.     

Effects of lignin and hemicellulose contents on dissolution of wood pulp in aqueous NaOH/urea solution

Four species of delignified woodchips with about 1 % lignin content (Chlorite–Woodchips) and a series of softwood pulps with different lignin contents were prepared by sodium chlorite delignification. After mechanical defibration, some Chlorite–Woodchips were directly subjected to dissolution treatment in NaOH/urea solvent; the others were first treated with NaOH solution to remove the hemicellulose to obtain NaOH–Chlorite–Woodchips or oxidized with potassium permanganate (OPP) to remove lignin completely to obtain OPP–Chlorite–Woodchips, and then subjected to the dissolution in NaOH/urea solvent. The results showed that the dissolved proportion of the Chlorite–Woodchips ranged from 36 to 46 %, the dissolved proportion of glucan was within 12 %, and most of the hemicellulose was dissolved in NaOH/urea solvent. Compared with Chlorite–Woodchips, the dissolved proportion of NaOH–Chlorite–Woodchips was lower, but their dissolved proportion of glucan was higher. After further permanganate delignification, both the dissolved proportion of the OPP–Chlorite–Woodchips and the dissolved proportion of glucan of the OPP–Chlorite–Woodchips were higher than those of the Chlorite–Woodchips. However, the dissolved proportion of glucan was still limited to only 15–30 %. The effect of the lignin content of softwood pulps on their dissolution is complicated. With the decrease of the lignin content of softwood pulp from 6.9 to 2.8 %, the dissolved proportion of pulp increased from 14 to 26 %. However, further reduction of lignin content from 2.8 to 0.3 % led to a decrease in the dissolved proportion of pulp from 26 to 12 %. The dissolved proportion of glucan followed the same tendency. These results indicated that the dissolution of wood cellulose in NaOH/urea solvent is not simply controlled by the hemicellulose and lignin contents, but also by some other factors.     

Understanding the Nonproductive Enzyme Adsorption and Physicochemical Properties of Residual Lignins in Moso Bamboo Pretreated with Sulfuric Acid and Kraft Pulping

In this work, to elucidate why the acid-pretreated bamboo shows disappointingly low enzymatic digestibility comparing to the alkali-pretreated bamboo, residual lignins in acid-pretreated and kraft pulped bamboo were isolated and analyzed by adsorption isotherm to evaluate their extents of nonproductive enzyme adsorption. Meanwhile, physicochemical properties of the isolated lignins were analyzed and a relationship was established with non-productive adsorption. Results showed that the adsorption affinity and binding strength of cellulase on acid-pretreated bamboo lignin (MWLa) was significantly higher than that on residual lignin in pulped bamboo (MWLp). The maximum adsorption capacity of cellulase on MWLp was 129.49 mg/g lignin, which was lower than that on MWLa (160.25 mg/g lignin). When isolated lignins were added into the Avicel hydrolysis solution, the inhibitory effect on enzymatic hydrolysis efficiency of MWLa was found to be considerably stronger than that with MWLp. The cellulase adsorption on isolated lignins was correlated positively with hydrophobicity, phenolic hydroxyl group, and degree of condensation but negatively with surface charges and aliphatic hydroxyl group. These results suggest that the higher nonproductive cellulase adsorption and physicochemical properties of residual lignin in acid-pretreated bamboo may be responsible for its disappointingly low enzymatic digestibility.     

Effects of Liquid Hot Water Pretreatment on Enzymatic Hydrolysis and Physicochemical Changes of Corncobs

Liquid hot water (LHW) pretreatment is an efficient chemical-free strategy for enhancing enzymatic digestibility of lignocellulosic biomass for conversion to fuels and chemicals in biorefinery. In this study, effects of LHW on removals of hemicelluloses and lignin from corncobs were studied under varying reaction conditions. LHW pretreatment at 160 °C for 10 min promoted the highest levels of hemicellulose solubilization into the liquid phase, resulting into the maximized pentose yield of 58.8% in the liquid and more than 60% removal of lignin from the solid, with 73.1% glucose recovery from enzymatic hydrolysis of the pretreated biomass using 10 FPU/g Celluclast?. This led to the maximal glucose and pentose recoveries of 81.9 and 71.2%, respectively, when combining sugars from the liquid phase from LHW and hydrolysis of the solid. Scanning electron microscopy revealed disruption of the intact biomass structure allowing increasing enzyme’s accessibility to the cellulose microfibers which showed higher crystallinity index compared to the native biomass as shown by x-ray diffraction with a marked increase in surface area as revealed by BET measurement. The work provides an insight into effects of LHW on modification of physicochemical properties of corncobs and an efficient approach for its processing in biorefinery industry.     

Effects of fiber physical and chemical characteristics on the interaction between endoglucanase and eucalypt fibers

Roles played by fiber physical and chemical characteristics in enzymatic hydrolysis of cellulosic materials were investigated by analyzing the interaction between an endoglucanase complex and eucalypt kraft fibers. PFI refining was employed to create the difference of fiber size distribution and morphology. Oxygen delignification and bleaching were employed to prepare fibers with different lignin and pentosan contents. The enzyme accessibility was monitored by adsorption at 4 °C and during hydrolysis at 40 °C. Molecular weight changes and reducing sugar released were monitored for digestibility of the samples. Greater maximum adsorption capacities of the enzymes were shown for the pulps with shorter and wider fibers and more fine fractions after refining. Highest amount of enzyme was adsorbed onto fibers with the least lignin contents at 4 °C. Fewer desorbed from fibers with higher lignin contents during hydrolysis at 40 °C. For unrefined fibers, less molecular weight reductions were observed for fibers with higher lignin contents. However, extensive fibrillation by refining negated the effects of lignin on the action of endoglucanase, similar molecular weight reductions were observed for fibers with three different lignin contents. Refining could be able to expose more reaction sites on the fiber surface, hence the impacts of lignin and pentosan diminished during hydrolysis for refined fibers.     

Enhancement of the Enzymatic Digestibility and Ethanol Production from Sugarcane Bagasse by Moderate Temperature-Dilute Ammonia Treatment

In this study, sugarcane bagasse was pretreated with ammonium hydroxide, and the effectiveness of the pretreatment on enzyme hydrolysis and ethanol production was examined. Bagasse was soaked in ammonium hydroxide and water at a ratio of 1:0.5:8 for 0–4 days at 70 °C. Approximately, 14–45 % lignin, 2–6 % cellulose, and 13–22 % hemicellulose were removed during a 0.5- to 4-day ammonia soaking period. The highest glucan conversion of sugarcane bagasse soaked in dilute ammonia at moderate temperature by cellulase was accomplished at 78 % with 75 % of the theoretical ethanol yield. Under the same conditions, untreated bagasse resulted in a cellulose digestibility of 29 and 27 % of the theoretical ethanol yield. The increased enzymatic digestibility and ethanol yields after dilute ammonia pretreatment was related to a combined effect of the removal of lignin and increase in the surface area of fibers.     

Influence of ionic-liquid incubation temperature on changes in cellulose structure,biomass composition,and enzymatic digestibility

Varying ionic liquid, 1-ethyl 3-methyl imidazolium acetate, pretreatment incubation temperature on lignocellulosic biomass substrates, corn stover, switchgrass and poplar, can have dramatic effects on the enzymatic digestibility of the resultant regenerated biomass. In order to delineate the chemical and physical changes resulting from the pretreatment process and correlate changes with enzymatic digestibility, X-ray powder and fiber diffraction, ¹³C cross polarization/magic angle spinning nuclear magnetic resonance spectroscopy, and compositional analysis was completed on poplar, corn stover and switchgrass samples. Optimal pretreatment incubation temperatures were most closely associated with the retention of amorphous substrates upon drying of regenerated biomass. Maximal glucan to glucose conversion for 24 h enzyme hydrolysis was observed for corn stover, switchgrass and poplar at ionic liquid incubation temperatures of 100, 110 and 120 °C, respectively. We hypothesize that effective pretreatment temperatures must attain lignin redistribution and retention of xylan for optimal enzyme digestibility.     

Nanofibrillation of dried pulp in NaOH solutions using bead milling

The drying process in typical pulp production generates strong hydrogen bonding between cellulose microfibrils in refined cell walls and increases the difficulty in obtaining uniform cellulose nanofibers. To investigate the efficacy of alkaline treatment for cellulose nanofibrillation, this study applied a bead-milling method in NaOH solutions for the nanofibrillation of dried pulps. NaOH treatments loosened the hydrogen bonding between cellulose microfibrils in dried pulps and allowed preparation of cellulose nanofibers in 8 % NaOH with a width of approximately 12–20 nm and a cellulose I crystal form. Both the nanofiber suspensions prepared in 8 and 16 % (w/w) NaOH were formed into hydrogels by neutralization because of surface entanglement and/or interdigitation between the nanofibers. When the dried pulp was fibrillated in 16 % (w/w) NaOH, the sample after neutralization had a uniquely integrated continuous network. These results can be applied to the preparation of high-strength films and fibers with cellulose I crystal forms without prior dissolution of pulps.     

Pretreatment of sugarcane bagasse by acidified aqueous polyol solutions

Pretreatments of sugarcane bagasse by three high boiling-point polyol solutions were compared in acid-catalysed processes. Pretreatments by ethylene glycol (EG) and propylene glycol solutions containing 1.2 % H₂SO₄ and 10 % water at 130 °C for 30 min removed 89 % lignin from bagasse resulting in a glucan digestibility of 95 % with a cellulase loading of ~20 FPU/g glucan. Pretreatment by glycerol solution under the same conditions removed 57 % lignin with a glucan digestibility of 77 %. Further investigations with EG solutions showed that increases in acid content, pretreatment temperature and time, and decrease in water content improved pretreatment effectiveness. A good linear correlation of glucan digestibility with delignification was observed with R² = 0.984. Bagasse samples pretreated with EG solutions were characterised by scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction, which confirmed that improved glucan enzymatic digestibility is mainly due to delignification and defibrillation of bagasse. Pretreatment by acidified EG solutions likely led to the formation of EG-glycosides. Up to 36 % of the total lignin was recovered from pretreatment hydrolysate, which may improve the pretreatment efficiency of recycled EG solution.     

Sorption of spruce O-acetylated galactoglucomannans onto different pulp fibres

Sorption of spruce acetylated galactoglucomannans (GGM) onto different pulps, among which unbleached and peroxide-bleached mechanical pulps, and unbleached and bleached kraft (BK) pulps, was studied as a means of understanding the retention of acetylated GGMs in mechanical pulping and papermaking. The fibre surface coverage of lignin and carbohydrates was estimated by X-ray photoelectron spectroscopy (XPS) or electron spectroscopy for chemical analysis (ESCA). GGM sorption was clearly favoured on kraft pulps. Hardly any differences in sorption were, however, observed between unbleached and BK pulps, even if the surface coverage of lignin was lower on the bleached pulp. Neither thermomechanical pulp (TMP) nor chemithermomechanical pulp (CTMP) manufactured from spruce sorbed any acetylated GGMs. Peroxide bleaching of the pulp did not increase sorption. Only CTMP produced from aspen sorbed some GGMs. The anionic charge of neither chemical nor mechanical pulps influenced GGM sorption.     

Comparison of hot-water extraction and steam treatment for production of high purity-grade dissolving pulp from green bamboo

The performance of hot-water extraction (HWE) and steam treatment (ST), followed by kraft pulping were compared for production of high purity-grade dissolving pulp from green bamboo. With the same prehydrolysis intensity (represented by the P-factor), the fractionation efficiency of HWE is far lower than that of ST. Because of lower removal of non-cellulosic components, the solid residue from HWE (even at approximately double the prehydrolysis intensity, P-factor = 1,379) required more active alkali (AA) during kraft pulping to obtain a cellulose purity equivalent to that achieved by the ST (P-factor = 756)-kraft process. To reach equivalent hemicellulose removal, HWE required more severe intensity than ST. However, FTIR and SEM characterizations of solid residue confirmed that intensified HWE resulted in significant lignin condensation. Antagonistic effects of hemicellulose removal and lignin condensation extent on subsequent kraft pulping were therefore more apparent in HWE than that in ST. Under the same kraft pulping conditions, lignin condensation from a severely intensified HWE process (P-factor = 2,020) caused greater cellulose yield and viscosity loss than that found for ST. Finally, at a given residual pentosan or lignin content, the cellulose yields from all HWE-kraft pulps were about 3 % lower than those from ST-kraft pulps. Consequently, based on an optimally setup chlorine dioxide bleaching stage, a cellulosic pulp with alpha-cellulose content of 97.6 % and viscosity of 927 mL/g was successfully produced from a ST-kraft pulp (P-factor = 756, AA = 19 %).     

钌碳耦合碱还原催化降解三倍体毛白杨

化石资源的过度消耗及因此产生的环境问题驱动了生物质资源各组分转化为燃料、化学品及材料的研究发展.木质素是自然界最丰富的可再生芳香碳氢资源,也是生物质中最难以实现高值化利用的组分.将木质素催化降解生成苯酚类单体化合物是其高值化利用的关键,因此开发新型催化体系对于提高当前生物精炼产业经济效益具有重要意义.本文利用钌碳耦合碱...     

Fundamental factors affecting biomass enzymatic reactivity

Poplar wood was treated with peracetic acid, KOH, and ball milling to produce 147 modellignocelluloses with a broad spectrum of lignin contents, acetyl contents, and crystallinity indices (CrIs), respectively. An empirical model was identified that describes the roles of these three properties in enzymatic hydrolysis. Lignin content and CrI have the greatest impact on biomass digestibility, whereas acetyl content has a minor impact. The digestibility of several lime-treated biomass samples agreed with the empirical model. Lime treatment removesallacetyl groups and a moderate amount of lignin and increases CrIslightly; lignin removal is the dominant benefit from lime treatment.     

Pretreatment of corn stover using wet oxidation to enhance enzymatic digestibility

Corn stover is an abundant, promising raw material for fuel ethanol production. Although it has a high cellulose content, without pretreatment it resists enzymatic hydrolysis, like most lignocellulosic materials. Wet oxidation (water, oxygen, mild alkali or acid, elevated temperature and pressure) was investigated to enhance the enzymatic digestibility of corn stover. Six different combinations of reaction temperature, time, and pH were applied. The best conditions (60g/L of corn stover, 195°C, 15 min, 12 bar O₂, 2 g/L of Na₂CO₃) increased the enzymatic conversion of corn stover four times, compared to untreated material. Under these conditions 60% of hemicellulose and 30% of lignin were solubilized, whereas 90% of cellulose remained in the solid fraction. After 24-h hydrolysis at 50°C using 25 filter paper units (FPU)/g of dry matter (DM) biomass, the achieved conversion of cellulose to glucose was about 85%. Decreasing the hydrolysis temperature to 40°C increased hydrolysis time from 24 to 72 h. Decreasing the enzyme loading to 5 FPU/g of DM biomass slightly decreased the enzymatic conversion from 83.4 to 71%. Thus, enzyme loading can be reduced without significantly affecting the efficiency of hydrolysis, an important economical aspect.     

Impact of Pretreatment with Dilute Sulfuric Acid Under Moderate Temperature on Hydrolysis of Corn Stover with Two Enzyme Systems

Pretreatment of corn stover with dilute sulfuric acid at moderate temperature was investigated, and glucan digestibility by Cellic CTec2 and Celluclast on the pretreated biomass was compared. Pretreatments were carried out from 60 to 180 min at the temperature from 105 to 135 °C, with acid concentrations ranging from 0.5 to 2 % (w/v). Significant portion of xylan was removed during pretreatment, and the glucan digestibility by CTec2 was significantly better than that by Celluclast in all cases. Analysis showed that glucan digestibility by both two enzymes correlated directly with the extent of xylan removal in pretreatment. Confidence interval was built to give a more precise range of glucan conversion and to test the significant difference among pretreatment conditions. Response surface model was built to obtain the optimal pretreatment condition to achieve high glucan conversion after enzymatic hydrolysis. Considering the cost and energy savings, the optimal pretreatment condition of 1.75 % acid for 160 min at 135 °C was determined, and glucan conversion can achieve the range from 72.86 to 76.69 % at 95 % confidence level after enzymatic hydrolysis, making total glucan recovery up to the range from 89.42 to 93.25 %.     

Structural Insights into Rice Straw Pretreated by Hot-Compressed Water in Relation to Enzymatic Hydrolysis

Pretreatment-induced structural alteration is critical in influencing the rate and extent of enzymatic saccharification of lignocellulosic biomass. The present work has investigated structural features of rice straw pretreated by hot-compressed water (HCW) from 140 to 240 °C for 10 or 30 min and enzymatic hydrolysis profiles of pretreated rice straw. Compositional profiles of pretreated rice straw were examined to offer the basis for structural changes. The wide-angle X-ray diffraction analysis revealed possible modification in crystalline microstructure of cellulose and the severity-dependent variation of crystallinity. The specific surface area (SSA) of pretreated samples was able to achieve more than 10-fold of that of the raw material and was in linear relationship with the removal of acetyl groups and xylan. The glucose yield by enzymatic hydrolysis of pretreated materials correlated linearly with the SSA increase and the dissolution of acetyl and xylan. A quantitatively intrinsic relationship was suggested to exist between enzymatic hydrolysis and the extraction of hemicellulose components in hydrothermally treated rice straw, and SSA was considered one important structural parameter signaling the efficiency of enzymatic digestibility in HCW-treated materials in which hemicellulose removal and lignin redistribution happened.     

Evaluation of Selected White-Rot Fungal Isolates for Improving the Sugar Yield from Wheat Straw

Biological pretreatment of lignocellulosic biomass by fungi can represent a low-cost and eco-friendly alternative to physicochemical methods to facilitate enzymatic hydrolysis. However, fungal metabolism can cause cellulose loss and it is therefore necessary to use the appropriate fungal strain-biomass type combination. In this work, the effects of biological pretreatments carried out by five different fungi on enzymatic hydrolysis of wheat straw were investigated. The best results were obtained with a Ceriporiopsis subvermispora strain, which minimized weight and cellulose losses and gave the highest net sugar yield (calculated with respect to the holocellulose content of the untreated straw), up to 44 % after a 10-week pretreatment, more than doubling the yields obtained with the other isolates. Moreover, prolonging the pretreatment from 4 up to 10 weeks produced a 2-fold increase, up to 60 %, in digestibility (sugar yield, calculated considering the holocellulose content of the pretreated material). The hemicellulose content of the pretreated material resulted inversely correlated with digestibility, and it could thus be utilized as an index of the pretreatment efficacy. Finally, a correlation was also found between digestibility and the difference between the absorbance values at 290 and 320 nm of pretreated wheat straw extracts.